SharpメーカーAR-M160/M205の使用説明書/サービス説明書
ページ先へ移動 of 33
AR-M160/M205 Online Manual Star t Star t Click this "Start" button..
2 CONTENTS INDEX Introduction This manual describes the printer an d scanner funct ions of the AR-M160/M205 digital multifunctional system. Trademark Acknowledgments ● Microsoft ® Windows ® operating system is a trademark or copyright of Mi crosoft Corporation in the U.
3 CONTENTS INDEX How to Use the Online Manual This section explains how to view the online manual. Pl ease read this section bef ore using the online manual. For information on using Acrobat Reader, see Acrobat Reader Help. How to Control the Online Manual In this manual, the following buttons are displayed at the bottom of each page.
4 CONTENTS INDEX Contents Introduction 2 How to Use the Online Manual 3 Basic Printing 5 Opening the Printer Driver From the "Start" Button 7 Printer Driver Settings 8 Printing Multiple P ag.
1 PRINT 5 CONTENTS INDEX Basic Printing (part 1) The following example explains how to print a document on letter size paper fr om WordPad. Before printing, make sure that th e correct size of paper for your doc ument has been load ed in the machine. 1 Make sure that the ON LINE indicator on the operation panel is lit.
1 PRINT 6 CONTENTS INDEX Basic Printing (part 2) If the tray runs out of paper during printing Add paper to the tray or pres s the [TRAY SELECT] key ( ) to select a different tray, and th en press the [ON LINE] key to resume printing.
1 PRINT 7 CONTENTS INDEX Opening the Printer Driver From the "Start" Button You can open the prin ter driver and change the printer dr iv er settings from the Windows "sta rt" button. Settings adjusted in th is way will be the initial settings when you print from an application.
1 PRINT 8 CONTENTS INDEX Printer Driver Settings To view Help for a setting, click the button in the upper right-hand corner of the window and then click the setting. Some restrictions exist on the combinations of settings that can be se lected in the printer driver setup screen.
1 PRINT 9 CONTENTS INDEX Printing Multiple Pages on One Page This feature allows you to reduce and print two or four document pages on a single sheet of paper. To use this function, open the printer driv er setup screen and select "2-Up" or "4-Up" for "N-Up Printing" on the "Main" tab.
1 PRINT 10 CONTENTS INDEX Fitting the Printed Image to the Paper The printer driver can adjust the size of the print ed image to match the size of the paper loaded in the mac hine. Follow the steps shown below to us e this function. The explanation below assumes that you intend to print a Ledger size documen t on letter size paper.
1 PRINT 11 CONTENTS INDEX Rotating the Print Image 180 Degrees The print image can be rotated 180 degrees. This feature is used to enable correct printing on envelopes and other p aper with flaps that can only be loaded in one orientation.
1 PRINT 12 CONTENTS INDEX Printing a Watermark You can print a watermark such as "CONFIDENTIAL" on your document. To print a watermark, open the printer dr iver, click the "Watermarks" tab, and foll ow the steps below. ☞ See Basic Printing for details on how to open the printer driver.
1 PRINT 13 CONTENTS INDEX Two-sided Printing (Only for models that support two-sided printing) The printer driver setup screen of models that support two-sided printing c ontains a "Doc ument Style" setting in the "Main" tab. This setting allows you to print on both sides of the paper.
1 PRINT 14 CONTENTS INDEX Outline of the Print Status Window When printing begins, the Print St atus Window automatically opens. The Print Status Window is a utilit y that monitors the ma chine and shows the name of the document bei ng printed and any error messages that occur.
2 PRINTER SHARING 15 CONTENTS INDEX Sharing the Printer Using Windows Networking The machine can be used as a shared printer in a Windows 95/98/Me/NT 4.0/200 0/XP network environment. Note that the Windows network envir onment must already be established.
2 PRINTER SHARING 16 CONTENTS INDEX Shared Printer Settings On the computer to which the machine is directly connected Follow the steps below to use the computer directly connected to the machine as a print server. If your operating system is Window s 95/98/Me, start from step 1.
2 PRINTER SHARING 17 CONTENTS INDEX Client Settings (part 1) Follow the procedure below to install the printer driver in the client. 1 Click the "start" button, and click "Control Panel". 2 Click "Printers and Other Hardware", and click "Printers and Faxes".
2 PRINTER SHARING 18 CONTENTS INDEX Client Settings (part 2) 5 Select "A network printer, or a printer attached to another computer", and click the "Next" button. 6 Select "Browse for a printer", and click the "Next" button.
2 PRINTER SHARING 19 CONTENTS INDEX Client Settings (part 3) Settings in Windows NT 4.0 If your operating system is Windows NT 4.0, establish settings as follo ws in the printer properties after installing the printe r driver. For the procedure for installing the printer dr iver, see "INSTALLING THE SOFTWARE" in the Software Set up Guide.
3 SCAN 20 CONTENTS INDEX Scanning Overview The flow chart shown below provid es an overview of scanning. *1 TWAIN is an internatio nal interface standard for scanners and other image acquisition devices. By installing a TWAIN driver o n your comp uter, you can scan and work with images using a variety of TW AIN-compliant applications.
3 SCAN 21 CONTENTS INDEX Scanning from a TWAIN-Compliant Application (part 1) The SHARP scanner driver is compatible wi th the TWAIN standard, allowing it to be used with a variety of TWAIN-compliant applications. Below is a step-by-step guide for acquiring a scanned im age to the Shar pdesk desktop screen using Sharpdesk.
3 SCAN 22 CONTENTS INDEX Scanning from a TWAIN-Compliant Application (part 2) 4 Select "Acquire Image" from the "File" menu, or click the "Acquire" button ( ).
3 SCAN 23 CONTENTS INDEX Scanning from a TWAIN-Compliant Application (part 3) 7 Specify the scanning area and set the scan preferences. For information on specifying the scan area and setting the scan preferences, see scanner driver Help. ☞ Scanner Driver Settings 8 When you are ready to be gin scanning, click the "Scan" button.
3 SCAN 24 CONTENTS INDEX Scanning from a TWAIN-Compliant Application (part 4) Scanner Driver Settings The scanner driver setup screen consists of the "Set-up sc reen", which lets you select scan settings, and the "Preview screen", which shows the scanned image.
3 SCAN 25 CONTENTS INDEX Scanning from a TWAIN-Compliant Application (part 5) Preview screen Preview window Click the "Preview" button in t he Set-up screen to display t he scanned image. You can specify the scanning area by dragging the mouse inside the window.
3 SCAN 26 CONTENTS INDEX Scanning from a WIA-Compli ant Application (Windows XP) (part 1) If you are using Windows XP, you can use the WIA driver to sc an from Sharpdesk, Paint and other WIA-compliant applications. The procedure for scanning using Paint is explained in the following.
3 SCAN 27 CONTENTS INDEX Scanning from a WIA-Compli ant Application (Windows XP) (part 2) 3 Select the paper source and picture type, and click the "Preview" button. The preview image will appear. If you placed the original on the document glass, select "Flatbed" for the "Paper source".
3 SCAN 28 CONTENTS INDEX Scanning from the "Scanner and Camera Wizard" (Windows XP) (part 1) The procedure for scanning with the "Scanner and Camera Wiz ard " in Windows XP is explained here. The "Scanner and Camera Wizard" lets you scan an image withou t using a WIA-compliant application.
3 SCAN 29 CONTENTS INDEX Scanning from the "Scanner and Camera Wizard" (Windows XP) (part 2) 5 Select the "Picture type " and "Paper source", and click the "Next" button. If you placed the original on the document glass, select "Flatbed" for the "Paper source".
3 SCAN 30 CONTENTS INDEX Scanning from the "Scanner and Camera Wizard" (Windows XP) (part 3) 7 When scanning ends, the following screen will appear. Select the next task you wish to perform, and then clic k the "Next" button. If you are ready to end the se ssion, click "Nothing.
3 SCAN 31 CONTENTS INDEX Outline of Button Manager Button Manager is a software utility that lin ks scanning functions to th e scanner key on the machin e. The Button Manager softwa re allows you to assign scan settings to each of the six scan menu keys on the machine.
3 SCAN 32 CONTENTS INDEX Button Manager Settings Once installed, Button Manager normally runs in the background in the Windows o perating system. If you need to change Button Manager settings, follow the st eps below. For details on Button Manager se ttings, see Button Manager Help.
4 INDEX 33 CONTENTS Index For detailed information on the settings in the printer driver, Print Status Window , scanner driver, and Bu tton Manager, see th e help files for each. A Application Selection ........... 31 "Auto Scan Area Adjustment" button .
デバイスSharp AR-M160/M205の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Sharp AR-M160/M205をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSharp AR-M160/M205の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sharp AR-M160/M205の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sharp AR-M160/M205で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sharp AR-M160/M205を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSharp AR-M160/M205の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sharp AR-M160/M205に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSharp AR-M160/M205デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
