SharpメーカーCDPC3500の使用説明書/サービス説明書
ページ先へ移動 of 24
OPERATION MANUAL FOR YOUR RE CORDS For your assistance in reporting this unit in case of loss or theft, please record below the model number and serial number which are located on the rear of the unit. P l e a s e r e t a i n t h i s i n f o r m a t i o n .
IMPORT ANT SAFEGUARDS CAUTION All t he safety and op er ating in str uc tions sho uld be read before the appliance is operated, and should be retained for future reference. Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure your personal safety.
<P=002> INTRODUCTION Thank you for purchasing this SHARP product. To obtai n th e bes t pe rf ormanc e fro m th is p rod uct, p lease read this manu al ca ref ul ly . It will guide you in operating your SHARP product. CONTENTS Page ACCESSORIES .
<P=003> PRECAUTIONS ■ General ● Please make sure that the unit is positioned in a well ven- tilated area and that there is at least 4" (10 cm) of free space along the sides and back. There must also be a minimum of 8" (20 cm) of free space on the top of the unit.
<P=004> NAMES OF CONTROLS AND INDICA TORS 1 67 8 9 2 4 51 1 12 13 14 16 17 18 3 3 15 10 43 42 ■ Front panel 1 1. (CD) Disc Tray 1 2. Extra Bass Indicator 1 3. Spectrum Analyzer/Volume Level Indicator 1 4. (CD) Disc Number Indicators 1 5. (CD/TUNER) Memory Indicator 1 6.
<P=005> (Continued) ■ Rear panel 1 1. AC Power Cord 1 2. CD Digital Output Jack 1 3. FM/AM Loop Antenna Jack 1 4. Subwoofer Output Jack 1 5. Video/Auxiliary (Audio Signal) Input Jacks 1 6. Front Speaker Terminals 1 7. Center Speaker Terminals 1 8.
HK <P=001> (Continued) ■ Remote control 1 1. Remote Control Transmitter LED 1 2 3 1 2 3 5 6 7 4 11 14 16 19 12 15 17 20 8 9 21 22 10 13 18 23 24 25 26 27 1 2. Surround Level Buttons 1 3. Center Level Buttons 1 4. Dolby Pro Logic Surround Mode Button 1 5.
<P=002> (Continued) ■ Speaker connection Connect the speaker wires to the SPEAKER terminals as shown. Front speakers ● Connect the black wire to the minus ( − ) terminal, and the red wire to the plus (+) terminal.
<P=003> (Continued) Installation of the rear speakers: If possible, mount the rear speakers on the wall. lnstall them 23" - 35" (60 - 90 cm) above the height of your ears when seated, if possible. ■ To mount the rear speakers on the wall The design of the rear speakers allows them to be hung on the wall.
<P=004> (Continued) ■ Demo mode When the AC power cord is first connected, the unit will enter the demonstration mode. To cancel the demonstration mode: When the unit is in the stand-by mode (demonstration mode), press the X-BASS/DEMO button. ● The demonstration mode will be canceled and the unit will be in the low power consumption mode.
HK <P=001> SOUND CONTROL 01 2 29 30 MAXIMUM ..... ■ Volume (Main unit operation) When the VOLUME control is turned clockwise, the volume will incr ea se.
<P=002> (Continued) ■ Dolby Pro Logic Surround mode Video and DVD software programs carrying the t r a d e m a r k a r e r e c o r d i n g s t h a t c o n t a i n t h e s a m e Dolby Surround data as used in movie theaters.
<P=003> SETTING THE CLO CK POWER ON/ STAND-BY CLOCK MEMORY/SET TUNING/ TIME ( ) In this example, the clock is set for the 12-hour (AM 12:00) sys- tem. 1 Press the ON/STAND-BY button to enter the stand-by mode. 2 Press the CLOCK button. 3 Within 5 seconds, press the MEMORY/SET button.
<P=004> COMP ACT DISC OPERA TION ■ CD playback 1 Press the ON/STAND-BY button to turn the power on. 2 Press the CD button. 3 Press the OPEN/CLOSE button to open the disc tray. 4 Place the CD(s) on the disc tray, label side up. ● CDs can be placed on any open position on the disc tray.
<P=005> (Continued) ■ Disc number selection 1 When stopped, press the DISC SKIP button. 2 Press the ( ) button. ● The next disc playback will begin, after which each following disc will be played sequentially. Notes: ● When the D ISC SKIP button is pr esse d dur ing playback, playback will begin automatically from the next disc.
HK <P=001> (Continued) ■ APMS (Automatic Programmable Music Selector) You can playback the tracks on the CDs in the disc 1 - 3 positions in any order desired. By specifying the disc numbers from 1 to 3, and the track numbers from 1 to 99, you can choose up to 32 selections for playback in the order you like.
<P=002> 2,3,5,6 1 4 RADIO OPERA TION ■ Tuning 1 Press the ON/STAND-BY button to turn the power on. 2 Press the TUNER (BAND) button. 3 Press the TUNER (BAND) button to select the desired fre- quency band. (FM ST, FM or AM) 4 Press the TUNING/TIME ( or ) button to tune into the desired station.
<P=003> TAPE TAPE 1 TAPE 2 PUSH EJECT PUSH EJECT 1 2,5 6 4 3 1 6 6 3 4 2,5 (Continued) To recall a memorized station: Press the PRESET ( or ) button for less than 0.
<P=004> RECORDING ● When r eco rding i mportant select i ons, be sure to make a preliminary test to ensure that the desired material is being properly recorded. ● The volume and sound quality can be adjusted with no effect on the recorded signal.
HK TIMER/ SLEEP Timer set indicator POWER ON/ STAND-BY MEMORY/ SET TUNING/ TIME ( ) CD TUNER (BAND) VIDEO/ AUX TAPE (1 2) <P=001> HOW TO USE THE BUIL T -IN TIMER 3 4 5 ■ Timer playback 1 Press the ON/STAND-BY button to turn the power on. 2 Press the CD, TUNER (BAND), TAPE (1 2) or VIDEO/AUX button to select the desired function.
<P=002> (Continued) ■ Sleep operation The radio, compact disc and cassette deck can all be turned off automatically. 1 Play back the desired sound source.
<P=003> (Continued) ■ Headphones ● Before plugging in or unplugging the headphones, make sure the volume level is reduced. ● Be sure your headphones have a 1/8" (3.5 mm) diameter plug and are between 16 ohms and 50 ohms impedance. The recommended impedance is 32 ohms.
<P=004> OPEN/ CLOSE POWER ON/ STAND-BY CD TRANSPORTING THE UNIT Before you move this product to a new location, proceed as follows: 1 Press the ON/STAND-BY button to turn the power on. 2 Press the CD button. 3 Press the OPEN/CLOSE button to open the disc tray.
TINSE0281AWZZ Printed in Malaysia A9912.HK CONSUMER LIMITED W ARRANTY SHARP ELECTRONICS CORPORA TION warrants to the first consumer purchaser that this Sharp brand product (the “Product”), when sh.
デバイスSharp CDPC3500の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Sharp CDPC3500をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSharp CDPC3500の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sharp CDPC3500の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sharp CDPC3500で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sharp CDPC3500を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSharp CDPC3500の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sharp CDPC3500に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSharp CDPC3500デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。