SharpメーカーLC-37HV4Mの使用説明書/サービス説明書
ページ先へ移動 of 75
LCD COLOUR TELEVISION OPERA TION MANU AL LC - 37HV4M ENGLISH LC-37HV4M Printed in Japan TINS-A642WJZZ OPERA TION MANU AL LC - 37HV4M TINS-A642WJZZ Printed on post-consumer recycled paper .
1 Contents Contents …………………………………………………… 1 Dear SHARP customer …………………………………… 2 Important Safety Precautions ………………….
2 Impor tant Safety Precautions Electricity is used to perfor m many useful functions, but it can also cause personal injuries and pr operty damage if improperly handled. This pr oduct has been engineered and manufactured with the highest priority on safety .
3 Important Safety Precautions • Cleaning—Unplug the AC cord fr om the AC outlet before cleaning the product. Use a damp cloth to clean the product.
4 LC-37HV4M Supplied accessories Make sure the following accessories ar e provided with the product. Remote control unit ( g 1) LR6 (“AA” size) Alkaline battery ( g 2) Stand unit (for A VC System).
5 Preparation Attaching the speaker s The supplied speaker unit can be attached to or detached fr om the Display . It must be attached unless you use external amplifier/speakers. Before attaching (or detaching) speakers, unplug the AC cor d from the AC outlet.
6 Preparation Securing fr om o ver turning 1 2 How to secure fr om o verturning Attach the supplied clamp for securing from overtur ning ( g 2) using the clamp screws. Use a strong cor d (commercially available) to secure to a wall or pillar . 1 2 Secure the stand on a platf orm or the floor .
7 Preparation Where to place the System “System” means the Display and A VC System. First select the location where to place the System. 1 2 Selecting the location of the System • Select a place with no direct sunlight and good ventilation. • The Display and the A VC System ar e connected by the system cable.
8 AC INPUT 110V – 240V DISPLAY INPUT1 DISPLAY INPUT2 System cable A VC System (rear view) AC cord Display (rear vie w) AC cord System cable (GREY) Connect the plug firmly until the hooks on both sides click. (WHITE) Connect the plug into the terminal and secure it by tightening the thumb screws.
9 Preparation 4 5 Attaching the c lamps and b undling the cables with the c lamp Closing the terminal cover Cable c lamp (Large) Insert the cable clamp in the hole on the Display leg as shown. Cable c lamp (Small) Peel off the seal on the back and attach as shown.
10 Preparation Setting the Displa y on the wall Setting the A VC System with the stand CA UTION • Installing the LCD Colour TV requir es special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves.
11 + + _ _ 1 Open the battery cover . 2 Insert two supplied LR6 ( “ AA ” size) Alkaline batteries. • Place batteries with their terminals corresponding to the ( e ) and ( f ) indications in the battery compar tment. 3 Close the battery cover . CA UTION Improper use of batteries can r esult in chemical leakage or explosion.
12 P ar t names OPC indicator* ST ANDBY/ON indicator X (MAIN POWER) button OPC sensor Displa y B (ST ANDBY/ON) button INPUT button i buttons ( VOL l / k ) CHANNEL buttons (CH s / r ) Remote control sensor *OPC: Optical Picture Contr ol (See Pages 37 and 39.
13 CLEAR * X (POWER) button INPUT 4 terminal (S-VIDEO) PC INPUT terminal (AUDIO) INPUT 4 terminals (AUDIO) PC INPUT terminal (ANALOG RGB) * If the A VC System is switched on but it does not appear to be operating corr ectly , it may need resetting.
14 P art names 1 B (ST ANDBY/ON) T o switch the power on and off. (See page 16.) 2 du (FREEZE/HOLD for TELETEXT) TV/External input mode: Change the still image mode. TELETEXT mode: Freeze a multi-page on scr een while other pages are automatically updated.
15 W atching TV Standard DIN45325 plug (IEC169-2) 75-ohm coaxial cable (round cable) Simple operations for watching a TV programme Basic connection Connecting to an antenna T o enjoy a clear er picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for coaxial cable.
16 W atching TV Display A VC System Off Flashing red Red Green Display status indicator Power off A VC System does not turn on or its AC cord is disconnected.
17 W atching TV Simple b utton operations f or changing c hannels Y ou can change channels in several ways. Using CH a a a a a / b b b b b on the remote control unit • Press CH a a a a a to increase channel number . • Press CH b b b b b to decr ease channel number .
18 W atching TV Simple b utton operation f or changing v olume/sound Changing the v olume Y ou can change the volume on the Display or on the remote contr ol unit. NO TE • “TV”, “INPUT1”, “INPUT2”, “INPUT3”, “INPUT4” and “PC” modes can each store volume adjustment values separately .
19 W atching TV : OFF : SRS : FOCUS : FOCUS+SRS Using h on the remote contr ol unit h produces SRS and FOCUS ef fect from the speakers. Each time you press h , the mode changes among SRS, FOCUS, FOCUS e SRS and OFF .
20 W atching TV Using SOUND on the remote contr ol unit In the NICAM TV broadcasts When receiving a stereo signal Each time you press SOUND , the mode switches between NICAM STEREO and MONO. In the TV mode of IGR TV br oadcasts When receiving a stereo signal Each time you press SOUND , the mode switches between STEREO and MONO.
21 Basic adjustment settings A V input mode menu items List of A V menu items to help y ou with operations Contrast ......................................... Page 31 Brightness ..................................... Pa ge 31 Colour ....................
22 Basic adjustment settings A uto installation Y ou can run auto installation, even after setting up the preset channels. Press MENU and the TV MENU scr een displays. 1 2 3 4 TV MENU Setup Option Password Press c / d to select “Setup”. If you already set the passwor d for child lock, go to step 3.
23 Basic adjustment settings A utomatic channel labelling After finding TV channels, the System starts naming each TV channel found. NO TE • The System can only name channels wher e the channel labelling information is provided. If channel information is not provided, the System displays “-----”.
24 Basic adjustment settings Pr ogramme setup Y ou can run the auto installation procedur e again at any time, by accessing the Setup menu, then Programme Setup. Channels can be tuned automatically or manually . Press MENU and the TV MENU scr een displays.
25 Basic adjustment settings Press a / b to select “Manual Adjust”, and then press ENTER . 4 TV MENU Setup Programme Setup “ Manual ” Next 01 SAT.1 02 PR07 03 KABEL Programme Setup “ Manual ” menu Press MENU and the TV MENU scr een displays.
26 Basic adjustment settings 3 Press a / b / c / d to select the channel you want to edit, and then press ENTER . • The selected channel information displays. Press a / b to select “Fine”, and then pr ess ENTER . Press c / d to adjust the frequency , and then press ENTER .
27 Basic adjustment settings 3 Press a / b / c / d to select the channel you want to edit, and then press ENTER . • The selected channel information displays. 1 2 Press a / b to select the optimum colour system, and then press ENTER . TV MENU Setup Programme Setup “ Manual ” Fine Colour sys.
28 Basic adjustment settings 3 Press a / b / c / d to select the channel you want to edit, and then press ENTER . • The selected channel information displays. Press a / b to select “Skip”, and then pr ess ENTER . • Skip menu displays. 1 2 TV MENU Setup Programme Setup “ Manual ” Fine Search Colour sys.
29 Basic adjustment settings Sort menus Sort Channel positions can be sorted freely . TV MENU Setup Programme Setup “ Sort ” 01 06 SAT.1 KABEL 01 SAT.1 02 03 04 05 Next TV MENU Setup Programme Setup “ Sort ” 02 KABEL Next 01 SAT.1 KABEL 02 TV MENU Setup Programme Setup “ Sort ” 01 KABEL Next 01 KABEL SAT.
30 Basic adjustment settings Language setting f or on-screen displa y Y ou can also select a language from setup menu. Select from among 3 languages: English, Chinese and Arabic. 3 Press MENU and the TV MENU scr een displays. 1 2 4 Press c / d to select “Setup”.
31 Basic adjustment settings Picture adjustments Adjust the picture to your pr eference with the following picture settings. Press MENU and the TV MENU (PC MENU) screen displays. 1 2 3 4 Press a / b to select a specific adjustment item. Press c / d to adjust the item to your desired position.
32 Basic adjustment settings C.M.S. (Colour Management System) Colour tone is managed using the six-colour adjustment setting. Press MENU and the TV MENU scr een displays. 1 2 Press c / d to select “Pictur e”. • Picture menu displays. 3 Press a / b to select “Advanced”, and then press ENTER .
33 Basic adjustment settings Colour temperature Adjusts the colour temperature to give the best white image. 4 5 Press a / b to select “Colour T emp”, and then press ENTER . Description White with Bluish tone White with Reddish tone Selected item High Mid-High Mid Mid-Low Low Press MENU and the TV MENU scr een displays.
34 Basic adjustment settings Monochr ome For viewing a video in monochrome. Press a / b to select “Monochr ome”, and then press ENTER . 4 Press c / d to select “On”, and then press ENTER . 5 Press MENU and the TV MENU scr een displays. 1 2 Press c / d to select “Pictur e”.
35 Basic adjustment settings I/P setting Adjusting the image and input signal can give you a more beautiful pictur e. Press a / b to select “I/P Setting”, and then press ENTER . • Some items may be gr eyed out. They are not selectable. Press c / d to select “Interlace” or “Progr essive”, and then pr ess ENTER .
36 A udio adjustment Sound adjustment Y ou can adjust the sound quality to your prefer ence with the following settings. Press c / d to select “Audio”. • Audio menu displays. Press a / b to select a specific adjustment item. Press c / d to adjust the item to your desired position.
37 Basic adjustment settings P ower Contr ol Power Control setting allows you to r educe the display brightness to save energy . Press a / b to select “Power Save”, and then press ENTER . Press c / d to select the desired backlight brightness, and then press ENTER .
38 Basic adjustment settings No signal Off When set to “Enable”, the power will automatically shut down if no signal inputs for 15 minutes. Press a / b to select “No Signal Off”, and then press ENTER . Press c / d to select “Enable”, and then press ENTER .
39 Basic adjustment settings P ower Control f or PC source Power Control allows you to r educe display brightness and save energy . Press c / d to select “Power Contr ol”. • Power control menu displays. 2 P ower save Press MENU and the PC MENU scr een displays.
40 Using e xternal equipment Display (rear view) HDTV tuner A VC System (rear view) A VC System (front vie w) A V Receiver (Built-in T uner Amp) VCR Game console/Camcor der PC Y ou can connect many types of external equipment to your System, like a VCR, DVD player , HDTV tuner , PC, game console and camcorder .
41 Using external equipment A VC System (rear view) D VD player Component cable (commercially available) S-video cable (commercially available) When using component cable, select “COMPONENT” for “Input Select” in the menu.
42 Using external equipment A VC System (rear view) VCR W atching a VCR image Connecting a VCR Y ou can use the INPUT 2 terminal when connecting a VCR and other audiovisual equipment. Displaying a VCR image T o watch a VCR image, select “INPUT2” fr om the “INPUT SOURCE” menu using b on the remote control unit or INPUT on the Display .
43 Using external equipment Displaying br oadcasts via an HDTV tuner T o watch an HDTV tuner image, select “INPUT3” fr om “INPUT SOURCE” menu using b on the remote control unit or INPUT on the Display . Then select “INPUT3” on “Input Select” in the menu to set the correct input signal type.
44 Using external equipment A VC System (front view) Game console/Camcorder A V cable (commercially available) S-video cable (commercially available) Enjo ying a game console and viewing camcor der im.
45 Using external equipment RGB cable (commercially available) A VC System (front view) ø 3.5 mm stereo minijack cable (commercially available) PC 15 14 13 12 9 11 10 8 7 6 5 4 3 2 1 Pin No.
46 Rear view Using external equipment Connecting external speaker s RED BLACK BLACK RED When using external speakers • Change the speaker setting to external speakers. (See page 47.) Make sure to connect the speaker jack and cable polarity ( L , + ) properly • The speaker jacks have plus ( L ) and minus ( + ) polarity .
47 Selecting speakers Y ou can output audio using the supplied speakers (detachable) or other external speakers. Press c / d to select “ External ” or “ Detachable ” , and then press ENTER . 4 Press MENU and the TV MENU (PC MENU) screen displays.
48 Useful adjustment settings 1 2 Image position (A V input mode onl y) For adjusting a picture’ s horizontal and vertical position. Press MENU and the TV MENU screen displays. Press c / d to select “Setup”. • If password is already set, you ar e asked to enter it.
49 Useful adjustment settings Mo ving the picture on the screen Y ou can move the picture ar ound on the screen. Press a / b / c / d to move an image on the screen to the desired position.
50 Useful adjustment settings 1 2 A uto Sync. adjustment (PC input mode only) For automatically adjusting the PC image. Press MENU and the PC MENU scr een displays. 3 Press a / b to select “Auto Sync.”, and then press ENTER . Press c / d to select “Y es”, and then press ENTER .
51 Useful adjustment settings Input signal sour ce Input selection Can use for selecting the input source. Press MENU and the TV MENU screen displays. 1 2 4 3 Press c / d to select “Option”. • Option menu displays. Press a / b to select “Input Select”, and then press ENTER .
52 Useful adjustment settings Colour system setting (A V input mode only) Yo u can change the colour system to one that is compatible with the image on the screen. Press MENU and the TV MENU scr een displays. 1 2 4 3 Press c / d to select “Option”.
53 Useful adjustment settings 4:3 Mode set to “Normal” 4:3 Mode set to “Panorama” Normal Full 14:9 Zoom 14:9 P anorama Full Cinema 16:9 Cinema 14:9 Selected item Normal Full 14:9 Zoom 14:9 P anorama Full Cinema 16:9 Cinema 14:9 Description For 4:3 “standard” pictur es.
54 Useful adjustment settings WIDE MODE Normal Full Dot by Dot Cinema Input signal (640 m 480) Input signal (1024 m 768) WIDE mode (f or PC input mode) Y ou can select the screen size. a Press f . • The WIDE MODE menu displays. 1 2 Press f or a / b to select a desired item on the menu.
55 3 4 Useful adjustment settings Input signal (PC input mode onl y) • Some input signals may have to be register ed manually to display properly . • The pairs of input signals (resolutions) in the list below are not distinguishable when r eceived.
56 Useful adjustment settings Wide screen signalling (WSS) (A V input mode only) WSS allows a television to switch automatically among the differ ent scr een formats. Press MENU and the TV MENU screen displays. 1 2 Press a / b to select “WSS”, and then press ENTER .
57 Useful adjustment settings Rotate Y ou can set the orientation of the picture. Press MENU and the PC MENU scr een displays. 1 2 NO TE • If you choose “Mirror” or “Rotate”, the sound orientation also changes. Press c / d to select “Setup”.
58 Useful adjustment settings A udio out Allows you to select what contr ols the audio output. Press MENU and the TV MENU (PC MENU) screen displays. 1 2 Press a / b to select “Audio Out”, and then press ENTER . 3 Press c / d to select “Fixed” or “V ariable”, and then press ENTER .
59 1 2 3 4 Cool c limate TV MENU Option Audio Out Input Select Cool Climate Colour System [Off] [Fixed] [AUTO] PC MENU Option Cool Climate Off On Useful adjustment settings Improves LCD r esponse when viewing fast-moving images. The effect is gr eater at low room temperatures (at or below 15˚C/59˚F).
60 P asswor d setting for child loc k (TV mode only) Allows you to use a password to pr otect cer tain settings from being accidentally changed. Setting a passw ord Press MENU and the TV MENU screen displays. 1 2 3 Press a / b to select “Child Lock”, and then press ENTER .
61 Useful features Dual screen functions Allows you to display two pictures on the scr een at one time. Dual screen Y ou can display two same-sized pictures except when inputting from a PC INPUT terminal. Press c . • Dual scr een displays and a selected input source image displays.
62 Useful features FREEZE Press d . • A moving image displays on the left screen and a still image displays on the right screen. The still image is one frame captured fr om a moving image at the moment you press d . 1 2 Update the still image by pressing ENTER .
63 Useful features T eletext function What is T elete xt? T eletext br oadcasts pages of information and entertainment to specially equipped television sets. Y our System receives T eletext signals br oadcast by a TV network, and decodes them into graphical format for viewing.
64 Useful features T OP Over view screen 203 203 TEXT 01:44:37 –+ 0005 ‹‹ 02 03 04 05 06 Subpage screen BLOCK PAGES TV PROGRAMS COLOR BAR WEATHER NEWS MOVIE LOCAL SPORTS BLOCK 1 BLOCK 2 BLOCK 3 .
65 Useful features Time display Y ou can display the time information included in the T eletext. Follow the steps below to display the time. Select a TV channel providing T eletext information. (The time information is automatically captured.) 1 2 3 4 Press C .
66 Appendix • No power . • Unit cannot be operated. • Remote control unit does not operate. • Pictur e is cut off. • Strange colour , light colour , or dark, or colour misalignment. • Power is suddenly turned off. • No pictur e. • No sound.
67 Appendix 640 g 400 720 g 400 640 g 480 800 g 600 832 g 624 1024 g 768 1280 g 768 85 Hz 70 Hz 85 Hz 60 Hz 65 Hz 72 Hz 75 Hz 85 Hz 56 Hz 60 Hz 72 Hz 75 Hz 85 Hz 74.
68 RS-232C port specifications Return code Command 4-digits Parameter 4-digits PC Contr ol of the System • When a program is set, the display can be contr olled from the PC using the RS-232C terminal.
69 Commands P I I I I I I I I I I I I I I I I I I I A A A A A A V H H V V C P POWER OFF (STANDBY) INPUT SWITCHING (TOGGLE) TV (CHANNEL FIXED) TV (CHANNEL SELECTION) (1 – 99) INPUT1 – 4 (1 – 4) P.
70 Appendix Item 37 o LCD COLOUR TV , Model:LC-37HV4M Video Colour System P AL/SECAM/NTSC 3.58/NTSC 4.43/P AL 60 TV Function P AL: B/G, D/K, I SECAM: B/G, D/K NTSC: M VHF/UHF 44.
71 Dimensional dra wings 545 82 87.5 305 545 305 87.5 948 117.5 117.5 587 697 110 200 183.5 200 408.5 1184 460.8 819.6 Unit: mm Display.
72 Dimensional drawings 365 430 250 5 180 95 183 Unit: mm A VC System.
73 HO W T O SET THE F A CT OR Y PRESETS Press and hold down CLEAR on the A VC System while it is in standby mode. Then press B (ST ANDBY/ON) button on the Display or B on the remote contr ol unit to tur n the System on. All setting items (except TV channel) return to the factory presetting.
SHARP CORPORA TION.
デバイスSharp LC-37HV4Mの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Sharp LC-37HV4Mをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSharp LC-37HV4Mの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sharp LC-37HV4Mの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sharp LC-37HV4Mで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sharp LC-37HV4Mを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSharp LC-37HV4Mの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sharp LC-37HV4Mに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSharp LC-37HV4Mデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。