SharpメーカーR3.1の使用説明書/サービス説明書
ページ先へ移動 of 33
Network Scanner T ool R3.1 User ’ s Guide V ersion 3.0.04.
Copyright © 2000-2004 by Sharp Corporation. All rights reserve d. Reproduction, adaptation or translation without prior written permission is prohibite d, except as allowed under copyright laws. Trademark Acknowledgements Sharpdesk is a trademark of Sharp Corporation.
Table of Contents Chapter 1 Overview ............................................................................................................ 1 Introduction ..........................................................................................
Enable/Disable a Scanner ........................................................................................... 27 Auto Detect ................................................................................................................. 27 W eb Setup.
Chapter 1 Overview Introduction W elcome to Sharp’ s Network Scanner T ool! This flexible, easy to use software provides TCP/IP network scanning capability between Sharp ne twork multifunction scanners with Network Scanner Expansion and your W indows-based computer .
About This Guide This guide assumes you have a basic understanding of W indows. This includes how to start your computer , navigate within a W indows environment, and perform basic W indows functions such as copying, printing and moving documents.
Hardware and Sof tware Requirement s The following minimum hardware and software is required to use the Network Scanner T ool. • Microsoft W indows 98, Millennium , NT 4.
Chapter 2 Preparing the Network Introduction Y our Network Administrator must prepare the network prior to installation of the Network Scanner T ool to ensure its proper operation. If y our Network Administrator follows the steps in this chapter , users can set up the Network Scanner T ool on their computers using its autom atic setup features.
S tep 1: Determine the Network Policy First, determine whether DHCP is used within your or ganization. If DHCP is used, some or all IP addresses are assigned dynamically . When using DH CP , “hostname” is the identifier used to specify PCs or Scanners.
S tep 4: Notify the Network Users Users connected to the network need to know th e policy in effect and the supporting information outlined in the following table. POLICY A DDITIONAL INFORMA TION 1) Simple addressing The IP address of the copier(s). 2) Regular DHCP The IP address of the copier(s).
Chapter 3 Installing the Network Scanner T ool Introduction The Network Scanner T ool software can be installed using two m ethods during the Sharpdesk installation process – a “typical” setup which installs the most common options, or a “custom” setup where you select the options you want to install.
Network Scanner T ool Inst allation T o install the Network Scanner T ool: 1. Make sure y ou have a supported sca nner connected to the network. 2. If any W indows applications are open, close th em to ensure that the software installs properly . 3. Insert the installation CD into y our CD-R OM drive.
Welcome to Network Scanner T ool Setup Wizard 1. Click Next . The wizard will search your network and display each of the scanners available for selection.
Scanner Selection Screen 2. Select the scanner(s) you want to use from the Available Scanners list and click Add . The scanner is moved to the My Sca nners list.
4. Enter the scanner’s IP Address or Host Name (DNS/WINS) and click OK . 5. After selecting your scanner (from steps 2-3), you can specify how it should contact your computer when sending scanned files (automatically, by IP Address, or by Host Name) by clicking Advanced .
Prefix to Profile Name screen 8. Enter a name using up to 6 characters (this name will be used to identify your scanner) and click Next . Note: To the Users of AR-507, AR-407, AR-337, and AR-287 With AR-507, AR-407, AR-337, and AR-287, "Initial" in the screen displayed in the setup of Network Scanner Tool is not available.
Profile Selection screen 9. Select the profiles you want to apply when working with the Network Scanner Tool by highlighting the profile in the Available Profiles list and clicking Add . To remove a profile from your pr ofile list, highlight it and click Remove .
Chapter 4 Using the Network Scanner T ool Introduction The Network Scanner T ool user interface le ts you setup and configure network-scanning processes using three configuration tabs: 1.
Network Scanner T ool Menu (system tray icon) Right-clicking on the icon located in the W indows system tray lets you access the Network Scanner T ool menu.
Configuring the Network Scanner T ool The Network Scanner T ool application can be started in a number of dif ferent ways: from the Network Scanner T ool context menu (or by sim ply double-clicking th.
• The Email profile does not save email addresses. As a result, each time the email client starts on your computer in response to receiving an e-mail request from the scanner , it prompts you for the destination address. • The Convert by OCR profile default is Rich T ext Format (R TF).
• If both the Image Processing and Convert by OCR options are selected, Image Processing executes first and Convert by OCR executes second. • If Convert by OCR is selected, the Output Options for the Profile refer to the text document that is produced by the OCR process, not the original image.
Image Processing Options Screen • After selecting your options on the Image Processing Options screen, click OK . Convert by OCR This option lets you change image files to text files using OCR (Optical Character Recognition), and automatically launches the program associated w ith the file type (for example, MS W ord for R TF files).
Launch Applications Options Screen If Sharpdesk is installed on your computer , it will automatically be selected as the default Program File. Y ou can select another program by clicking Browse . A standard Windows Open dialog displays. Navigate to the desired application and either double-click it or select it, and then click Open .
• Move File T o Folder This option lets you select the folder that your scan will be moved to. When you click Details , the Send to Folder screen displays. Send to Folder Screen • Click Browse to display the Browse for Folder scr een where you can select the target folder .
using the W eb Setup button on the Scanners tab described below . • Override Scanner File Name Settings This option lets you rename files received from a scanner .
After entering or updating information on the Profiles tab, click Apply to apply your updates and keep the Network Scanner T ool screen active. T o apply your changes and close the screen, click OK . T o close the screen without saving any ch anges which may have been made, click Cancel .
Scanners T ab The Scanners tab lets you: • Add a new scanner with Scanner Expansion. • Examine and/or change scanner properties . • Delete an existing scanner . • Automatically detect Sharp scanners connected to the network. • Use W eb Setup pages of a Sharp multifunction scanner to change configuration values.
Scanner Properties Screen The following options are available on this screen. IP Address When the IP address is used, the Network Scanner T ool verifies that the IP address is assigned to a Sharp scanner .
Advanced Scanner Settings Screen • If your network operates under Simple Addressing or Exception DHCP policies described in Chapter 2, it is recommended to select ‘Use IP Address’ to identify y our computer .
Deleting a Scanner T o delete a scanner , select it from the K nown Scanners list and then click the Delete button. When the confirmation message displays, click Ye s . Any active profiles residing on that scanner will be removed as part of the scanner delete process.
System Options T ab The Network Scanner T ool limits the type of files that can be transferred to your computer to certain file types including .TIF , .JPG , JPEG and .PDF with or without compression. FTP Port Number The Network Scanner T ool can use a dif ferent port number than the standard FTP port number (21).
Network Scanner T ool User ’s Guide 29 User Name / Password can only be a combin ation of English letters (a-z or A-Z), digits (0-9), space, and punctuation marks. After entering or updating information on the System Options tab, click Apply to apply your updates and keep the Network Scanner T ool screen active.
デバイスSharp R3.1の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Sharp R3.1をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSharp R3.1の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sharp R3.1の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sharp R3.1で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sharp R3.1を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSharp R3.1の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sharp R3.1に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSharp R3.1デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
