SharpメーカーXL-MP130の使用説明書/サービス説明書
ページ先へ移動 of 40
03/12/17 XL-MP110E_FRONT .fm Thank you f or purchasing this SHARP pr oduct. T o obtain the best performance fr om this product, please read this manual carefully . It will guide you in operating y our SHARP product. XL-MP130 MICR O COMPONENT SYSTEM XL-MP110E Micro Component System consisting of XL-MP110E (main unit) and CP-MP110E (speaker system).
2 XL-MP110E CAUTION-INVISIBLE LASER RADIATION WHEN OPEN. DO NOT STARE INTO BEAM OR VIEW DIRECTL Y WITH OPTICAL INSTRUMENTS. WARNUNG-UNSICHTBARE LASERSTRAHLUNG WENN GERÄT GEÖFFNET . NICH IN DIE STRAHLUNG SCHAUEN ODER DIREKT MIT OPTISCHEN HILFSMITTELN BETRACHTEN.
3 8 XL-MP110E General Information Precautions General Please ensure that the equipment is positioned in a well-ventilated area and ensure that there is at least 10 cm (4") of free space along the sides, top and back of the equipment. Do not place anything on top of the unit.
4 XL-MP110E General Information Controls and indicators Front panel Reference page 1. Disc Trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 2. Timer Indicator . . . . . . . . . . . . . . . . . . . . . . . . . .
5 8 XL-MP110E General Information Display Reference page 1. Disc Number Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 2. Disc Play Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 3. Disc Pause Indicator .
6 XL-MP110E General Information Controls and indicators (continued) Rear panel Reference page 1. Speaker Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 2. AC Power Lead . . . . . . . . . . . . . . . . . . . . . . . .
7 8 XL-MP110E General Information Remote control Reference page 1. Remote Control Transmitter . . . . . . . . . . . . . . . . . . . . . . . . 11 2. Disc Clear/Dimmer Button . . . . . . . . . . . . . . . . . . . . . . 12, 20 3. Disc Number Select Buttons .
8 XL-MP110E Preparation for Use System connections RATED SPEAKER IMPEDANCE: 6 OHMS MIN. AC INPUT ANTENNA RIGHT RIGHT LEFT FM 75 OHMS AM LOOP VIDEO/AUX IN SUBWOOFER PRE-OUT SPEAKERS LEFT Left speaker R.
9 XL-MP110E Preparation for Use Aerial connection Supplied FM aerial: Connect the FM aerial wire to the FM 75 OHMS terminal and position the FM aerial wire in the direction where the strongest signal can be received. Supplied AM loop aerial: Connect the AM loop aerial to the AM LOOP socket.
10 XL-MP110E Preparation for Use System connections (continued) A C power connection After checking all the connections have been made correctly, plug the AC power lead of this unit into the wall socket. If you plug in the unit first, the unit will enter the demonstration mode.
11 XL-MP110E Preparation for Use Remote control Battery installation Precautions for battery use: Replace all old batteries with new ones at the same time. Do not mix old and new batteries. Remove the batteries if the unit will not be used for long periods of time.
12 XL-MP110E Basic Operation General control To turn the power on Press the ON/ST AND-BY button to turn the power on. To change the display brightness Y ou can s witch the displa y brightness by pressing the CLEAR/ DIMMER button more than 2 seconds .
13 XL-MP110E Basic Operation Setting the clock In this example, the clock is set for the 24-hour (0:00) display. T o confirm the time display: [When the unit is in the stand-by mode] Press the CLOCK/TIMER button. The time display will appear f or about 10 seconds.
14 XL-MP110E CD or MP3/WMA disc Playback Listening to a CD or MP3/WMA disc This system can play bac k a standard CD , CD-R/RW in the CD f ormat and CD-R/RW with MP3 or WMA files, but cannot record on them. Some audio CD-R and CD-RW discs ma y not be playab le due to the state of the disc or the device that w as used for recording.
15 XL-MP110E CD or MP3/WMA disc Playback Playbac k will begin from track 1 on DISC 1. After that disc fin- ishes playing, the ne xt disc will automatically play . After the last track on the fifth disc is pla yed, the unit will stop automatically .
16 XL-MP110E CD or MP3/WMA disc Playback Listening to a CD or MP3/WMA disc (continued) V arious disc functions Notes for CD: Notes for MP3/WMA discs: T rack up/tr ack down is possib le only within individual discs. The sound is heard during fast f orward/f ast rev erse with a CD , but not with an MP3/WMA disc.
17 XL-MP110E CD or MP3/WMA disc Playback To change the display (MP3/WMA discs only) Whilst in the stop mode or playbac k mode, press the DISPLA Y button.
18 XL-MP110E CD or MP3/WMA disc Playback Advanced CD or MP3/WMA disc playback To specify a disc to play You can play a disc by specifying the disc number. Playback will begin from track 1 on the chosen disc. After the last track on the chosen disc is pla yed, the unit stops automatically .
19 XL-MP110E CD or MP3/WMA disc Playback Repeat play Repeat play can pla y all 5 discs, all tracks on a chosen disc , or a programmed sequence continuously . To cancel repeat play: Press the / button again. " " will go out. To cancel repeat play: Press the CD DIRECT PLAY button again.
20 XL-MP110E CD or MP3/WMA disc Playback Advanced CD or MP3/WMA disc playback (continued) Programmed play You can choose up to 32 selections for playback in the order you like. To cancel the programmed play mode: Whilst in the stop mode and the "MEMORY" indicator is lit, press the CLEAR/DIMMER button on the remote control.
21 XL-MP110E Radio Listening to the radio Auto power on function: When you press any of the following buttons, the unit turns on. TUNER (BAND) button (main unit and remote control): The unit turns on and the "TUNER" function is activated.
22 XL-MP110E Radio Listening to the radio (continued) Memorising a station You can store 40 AM and FM stations in memory and recall them at the push of a button. (Preset tuning) Note: The backup function protects the memorised stations f or a fe w hours should there be a power f ailure or the AC power lead become disconnected.
23 XL-MP110E Tape Playback Listening to a cassette tape Tape playback Auto power on function: When you press any of the following buttons, the unit turns on. TAPE button (main unit and remote control): The unit turns on and the "TAPE" function is activated.
24 XL-MP110E Tape Playback Listening to a cassette tape (continued) Various tape functions Caution: To remove the cassette, press the (TAPE ) button, and then open the compartment. If a power failure occurs during tape operation, the tape head will remain engaged with the tape and the cassette door will not open.
25 XL-MP110E Tape Recording Recording fr om a CD or MP3/WMA disc Y ou can record the desired disc using the CD DIRECT PLA Y button. To stop recording: Press the (TAPE ) button. The disc and tape will stop . / RRMCGA041AWSA / 1 Press the ON/STAND-BY button to turn the power on.
26 XL-MP110E Tape Recording Recording on a cassette tape (continued) Recording from several CDs continuously: To perform programmed recording: To stop recording: Press the (TAPE ) button. The CD and tape will stop . Recording from the radio To interrupt recording: Press the button.
27 XL-MP110E Advanced Features Timer and sleep operation Timer playback: The unit turns on and plays the desired source (CD , tuner , tape) at a preset time.
28 XL-MP110E Advanced Features Timer and sleep operation (continued) Continued to the next page 4 Within 10 seconds, press the or button to se- lect "ONCE SET" or "DAILY SET", and press the MEMORY/ SET button. 5 Press the or button to select "PLAY" or "REC", and press the MEMORY/SET button.
29 XL-MP110E Advanced Features Note: Checking the timer setting in the timer stand-b y mode: Cancelling the timer setting in the timer stand-by mode: Reusing the memorised timer setting: The timer setting will be memorised once it is entered. To reuse the same setting, perform the following operations.
30 XL-MP110E Advanced Features Timer and sleep operation (continued) Sleep operation The radio, compact disc and cassette tape can all be turned off au- tomatically. To confirm the remaining sleep time: To cancel the sleep operation: Press the ON/STAND-BY button whilst "SLEEP" is indicated.
31 XL-MP110E Advanced Features Enhancing your system The connection lead is not included. Purchase a commercially avail- able lead as shown below. Auto power on function: When you press any of the following buttons, the unit turns on.
32 XL-MP110E Advanced Features Enhancing your system (continued) Subwoofer connection When a commercially available speaker with a built-in amplifier is connected to this unit, you can enjoy sound with emphasised bass. Connect an RCA lead from a commercially available speaker with a built-in amplifier to the SUBWOOFER PRE-OUT socket.
33 XL-MP110E References Cassette deck Remote control Tuner Condensation Sudden temperature changes, storage or operation in an extremely humid environment may cause condensation inside the cabinet (CD pickup, tape heads, etc.) or on the transmitter on the remote control.
34 XL-MP110E References Troubleshooting chart (continued) If trouble occurs When this product is subjected to strong external interference (me- chanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is operated incorrectly, it may malfunc- tion.
35 XL-MP110E References Maintenance Cleaning the tape-handling parts Dirty heads, capstans or pinch rollers can cause poor sound and tape jams. Clean these parts with a cotton swab moistened with commercial head/pinch roller cleaner or isopropyl alcohol.
36 XL-MP110E References Specifications As par t of our policy of continuous impro vement, SHARP reserves the right to make design and specification changes f or product improv ement without prior notice. The perf or mance specification fig- ures indicated are nominal values of production units .
CD-MEM O .fm MEMO.
CD-MEM O .fm MEMO.
FOR LOCATION ENQUIRIES WITHIN AUSTRALIA REGARDING YOUR LOCAL SHARP APPROVED SERVICE CENTRE VISIT OUR WEBSITE AT www.sharp.net.au OR CALL SHARP CUSTOMER CARE 1300 135 022 SHARP CORPORATION OF AUSTRALIA.
This Sharp product is warranted against faults in materials and manufacture for a period of twelve(12) months from the date of original purchase. The owner is responsible for any transportation and insurance costs if the product has to be returned for repair.
デバイスSharp XL-MP130の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Sharp XL-MP130をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSharp XL-MP130の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sharp XL-MP130の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sharp XL-MP130で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sharp XL-MP130を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSharp XL-MP130の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sharp XL-MP130に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSharp XL-MP130デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。