Shenzhen High Power TechメーカーC700の使用説明書/サービス説明書
ページ先へ移動 of 25
Net ac iMuz (C700) User ’ s Manual ShenZhen Net ac T echnology Co., Lt d..
Notice This manual contains information protec ted by copyright law . All right s are reserved. No part of this document may be used or reproduced in any form or by any means, or stored in a database/retrieval system without prior written permission from Netac T echnology Co.
Others Windows 98 mentioned in this user ’ s manual refers to the first and the sec ond edition of Windows 98. Files or data stored in iMuz cannot completely avoi d being destroyed or lost due to improp er use or other reasons. Please backup files and data when necessary .
4.6.3 R EPEA T ................................................................................................................... .................... 19 4.6.4 FM SET ...................................................................................
AC Power Adapter Remote Controller Earphone Installation CD C a r r y i n g C a s e Guarantee Card 1.2 Features High definition array LCD wi th indigo blue backlight Support Remote Controller .
1.3 Name of Part s 1.4 System Requirement IBM Compatible PC, Notebook with USB port Windows 98/Me/2000/XP/Server 2003, Mac OS 9.x/X USB S pecificati ons 2.
Support ed File T ypes MPEG1, 2, 2.5 Layer3 (8~320Kbps, VBR), WMA (8~192Kbps), OGG (8~320Kbps) ID3 T ag V er1.0/1.1/2.0 EQ NORMAL, ROCK, CLASSIC, JAZZ, U-BASS, USER Repeat ALL, SINGLE, DIR, SUB DIR, SHUFFLE Music Music Management Play-list (M3U, BMK) Recording Format MP3 （ 32~320Kbps ， 44.
2) Insert the installation CD into the CD-ROM driver . 3) Connect iMuz with computer , the system would find an USB device automatically . “Add New Hardware Wizard” dialog appears, click “Next” to continue. 4) Please select “Search for the best driver for your device.
6) System would automatically detect the driver . Please click “Next” in the following steps and click “Finish” in the last step to finish the installation. 2.2.2 Connecting 1) Press PLA Y/P AUSE button to power on iMuz, then connect it and the computer with a USB cable.
2) IMuz would be power off automatically af ter disconnecting from computer safely . 3. Usage 3.1 Basic Operation 3.1.1 Pow er On/Off iMuz would enter MUSIC mode automatically after power on. iMuz would pla y the track that it is playing before power off last time automatically , if you set “AUTO PLA Y”.
3.2.2 Connecting Connect Remote Controller with Earphone/Remote Controller Jack of iMuz, and Earphone with Earphone Jack of Remote Controller . 3.2.3 Usage The definition of buttons on Remote Controller are same as mainframe except holding PLA Y/P AUSE button to turn power on.
4. Mode Operation 4.1 MUSIC Mode 4.1.1 Entering MUSIC Mode Enter browse status of MUSIC mode aut omatically after iMuz power on. IMuz would automatically play the track which is playing before power off last time if you set “AUT O PLA Y”. (Please refer to “4.
4.1.5 BMK Play-List BMK play-list is saved in directory PLA YLIST of iMuz, and you can search or select it to play . (Please refer to “4.3 LIST Mode” for det ails) Press REC button to add the playing or selected tracks into BMK play-list when playing track or browsing file (Y ou can set 100 tracks at best).
The recording mode of MIC is Mono, a nd the recorded file is saved as MIC ***.mp3 in the VOICE ENCODE folder automatically after record stopped, “***” is the serial number of recorded file. Y ou can set the bit rate when MIC recording, please refer to “4.
deleted files into/from BMK play-list) 4.3.2 Selecting List Press VOL+ / VOL- button to se lect previous/next play-list. Press PLA Y/P AUSE / FF button to open a play-list. Press VOL+ / VOL- button again to select track after opened a play-list.
Press VOL+ / VOL- bu tton to adjust volume. Press FF / REW button to adjust frequenc y , the frequency changes by 0.1MHZ. Press MODE button or hold FF / REW button to progress automatic searching c hannel. iMuz would stop searching and play automatically after found a channel.
IMuz would search the tracks in iMuz afresh after power on every time, and found i ndex. IMuz can saved 5000 files and 10 level directories. Y ou can search tracks in iMuz a ccurately through the former three letters of track in SEARCH mode. Press FF / REW button to switch the current searching letter .
When selecting ROCK, the setting of output frequency is the following: When selecting CLASSIC, the setting of output frequency is the following: When selecting JAZZ, the setting of output .
When selecting USER, press VOL+ / VOL- button to set each item according to your fondness, press PLA Y/P AUSE / FF to switch frequency , and MODE / REW to exit. 4.6.3 REPEA T Enter REPEA T window , you can select MODE, ON/OFF or SHUFFLE. Select MODE, then press VOL+ / VOL- bu tton to set the range of pa ying track.
4.6.4 FM SET Enter FM SET window , you can se lect the RADIO MODE, FM BAND MODE or SENSITIVITY . Press VOL+ / VOL- button to set the output signal as STEREO or MONO in RADIO MODE. STEREO: The output of frequency module is stereo signal; MONO: The output of frequency module is mono signal.
Press “VOL+” / “VOL-“ button to set bit rate of LINE-IN and FM record in ENCODER. Y ou can select 64, 96, 128, 256 or 320Kbps. Press “VOL+” / “VOL-“ button to set bit rate of MIC record in VOICE. Y ou can select 32, 48, 64, 96 or 128Kbps.
Press “VOL+” / “VOL-“ button to set display time as normal or reuerse time when playing track in TIME. NORMAL: The played time of track; REUERSE : The sp are time of track. Press “VOL+” / “VOL-“ button to set language of menu and ID3 as ABC, 简体 or 繁體 in LANGUAGE.
charge. Press “VOL+” / “VOL-“ button to set the ef fect of which bass of output audio are boosted pa rtly when iMuz playing track and recording files in BASS BOOST .
5.1 Firmware Update 1) Please access Netac website: http://www .netac.com.cn T o download the Firmware update program of iMuz to update firmware of iMuz. 2) Copy the firmware update program which downl oad fr om website into directory FIRMW ARE of iMuz, and disconnect iMuz from computer safely .
China Academy of Science & T ech Development, No.1 High-tech South S t, Shenzhen, China 518057 T el: +86-755-26727800 (Switchboard) +86-755-26727500, 26727510, 26727520 (T echnical Support) Fax: +86-755-26727610, +86-755-26727620 Website: http://www .
デバイスShenzhen High Power Tech C700の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Shenzhen High Power Tech C700をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはShenzhen High Power Tech C700の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Shenzhen High Power Tech C700の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Shenzhen High Power Tech C700で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Shenzhen High Power Tech C700を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はShenzhen High Power Tech C700の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Shenzhen High Power Tech C700に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちShenzhen High Power Tech C700デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
