Simplicityメーカー1694867の使用説明書/サービス説明書
ページ先へ移動 of 44
Parts Manual Rev. 11/2005 Large Frame Walk-Behind Snowthrowers TP 400-4250-00-LW-S Mf g . No. Descri p tion 9 . 5 HP S nowthrowers 1694867 9560E, 9.5HP Snowthr ower 1694914 9560EX, 9.5HP Snowthrow er (CE) Mf g . No. Descri p tion 10.5HP Snowthrowers 1694847 10560E, 10.
.
Table Of Content s Torque Specification Chart ...... ............................ ......................... .......... Inside Back Cover PRODUCT COMPONENTS PAGES Handles and Controls Group - C hannel ........................... .............. ........
Handles and Controls Group - Channel NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Linkage adjustment for traction and auger drive with power boost : with drive levers engaged, t he bottom end of lower rods (Ref. 40 & 66) should be flush with bottom of springs (Ref.
PART NO. DESCRIPTION REF NO QTY. Handles and Controls Group - Channel Footnote s 1 1727128 1 HANDLE, Clutch R.H. 2 1668608 2 GRIP, Handle Clutch, Black 3 1928732 1 CAPSCREW, Hex Washer Head Taptite #1.
Handles and Controls Group - Channel NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Linkage adjustment for traction and auger drive with power boost : with drive levers engaged, t he bottom end of lower rods (Ref. 40 & 66) should be flush with bottom of springs (Ref.
PART NO. DESCRIPTION REF NO QTY. Handles and Controls Group - Channel Footnote s 45 1960518 2 NUT, Push for 1/4 Diameter Thread 46 1960252 2 CARRIAGE BOLT, 1/4-20 x 5/8 G5 (U sed on all models Except 38 in. Models) 47 1960294 2 NUT, Hex Flange Whiz Lock, 1/4-20 Small (Used on all models Except 38 in.
Handles and Controls Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. T he ho les in the fr am e f or R ef. 48 ar e slotted so t he gear support (Ref. 46 ) can be position ed to ensure the inside surface of t h e gea r su pp o rt i s t igh t agai ns t the hub o f the front g ear (Ref.
PART NO. DESCRIPTION REF NO QTY. Handles and Controls Group Footnote s 1 1726833 1 CABLE AND SPRING ASSEMBLY, R.H. Auger 2 1731334A 1 HANDLE, Tube, R.H.
Handles and Controls Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. T he ho les in the fr am e f or R ef. 48 ar e slotted so t he gear support (Ref. 46 ) can be position ed to ensure the inside surface of t h e gea r su pp o rt i s t igh t agai ns t the hub o f the front g ear (Ref.
PART NO. DESCRIPTION REF NO QTY. Handles and Controls Group Footnote s 45 1727088 1 ROD, 3/8" Diameter, 26"LG, E-Coat 46 1718793 1 SUPPORT, Gear 47 1960518 2 NUT, Push for 1/4 Diameter Threa.
Engine and Frame Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Hook one end of spring (Ref . 7) into top hole of r oller arm (Ref. 6) and ot her end into top hol e of the idler arm assem bly i n t he Tract i on Dr ive Gr oup.
PART NO. DESCRIPTION REF NO QTY. Engine and Frame Group Footnote s 1 1700415 1 MV-BELT, 3L 2 1928731 1 NUT, Hex, Toplock, Jam, 3/8-16 3 1668477 4 PULLEY, Idler 4 1960647 1 SCREW, Hex Head, 3/8-16 x 1-.
Engine and Frame Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Hook one end of spring (Ref . 7) into top hole of r oller arm (Ref. 6) and ot her end into top hol e of the idler arm assem bly i n t he Tract i on Dr ive Gr oup.
PART NO. DESCRIPTION REF NO QTY. Engine and Frame Group Footnote s 44 1921515 2 CAPSCREW, Hex Head, 5/16-24 x 3/4 G5 45 1922128 1 CAPSCREW, Hex Head, 3/8-24 x 1-1/2 G8 46 1916965 1 LOCKWASHER, Spring,.
Engine and Frame Group with Power Boost NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Hook one end of spring (Ref . 7) into to p hole of r oller arm ( Ref. 6) and ot her end into top hol e of the idl er ar m as sembly in th e Traction Drive Gro up.
PART NO. DESCRIPTION REF NO QTY. Engine and Frame Group with Power Boost Footnote s 1 1700415 1 V-BELT, 3L 1 1672732 1 V-BELT, 3L (Used Only on 38 in. Models) 2 1928731 1 NUT, Hex, Toplock, Jam, 3/8-1.
Engine and Frame Group with Power Boost NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Hook one end of spring (Ref . 7) into to p hole of r oller arm ( Ref. 6) and ot her end into top hol e of the idl er ar m as sembly in th e Traction Drive Gro up.
PART NO. DESCRIPTION REF NO QTY. Engine and Frame Group with Power Boost Footnote s 38 1726942 1 HOSE, Oil Drain, w/Fittings 39 1727033 1 CAPSCREW, Muffler Deflector 40 1727032 1 DEFLECTOR, Rain Guard, B&S Snow Muffler 41 2831277 4 NUT, Hex Flange, 5/16-18, Whiz Lock Small 42 1725326A 4 SUPPORT, Engine Riser (Used on all models Except 38 in.
Auger and Impeller Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 37 End of hub to be flush with end of rolled d own shaft (Ref. 9). Torque to 30 -34 ft-lbs. 40 - 4 6 Nm. Impe ller t o be po siti oned against bearing before tightening set screw.
PART NO. DESCRIPTION REF NO QTY. Auger and Impeller Group Footnote s 1 1679293 1 PULLEY, w/Hub 2 1928721 2 SCREW, Set Square Head Cup Point, 5/16-18 x 1/2 G8 3 1612187A 1 IMPELLER ASSEMBLY 4 1960474 1.
Auger and Impeller Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 37 End of hub to be flush with end of rolled d own shaft (Ref. 9). Torque to 30 -34 ft-lbs. 40 - 4 6 Nm. Impe ller t o be po siti oned against bearing before tightening set screw.
PART NO. DESCRIPTION REF NO QTY. Auger and Impeller Group Footnote s 37 1709894 2 BUSHING, Plastic (Used on 38 in. Mo dels) The above parts group applies to the following Mfg. Nos.: 2005 23 © Copyright Simplicity Manufacturing, Inc. All Rights Reserved.
Auger Housing and Chute Gr oup - 24, 28 & 32 inch NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Coat top and bottom of chute ring with grease. Scraper blade should be on inside of housing. When installing cable, make sure it does not come into contact wi th muffler.
PART NO. DESCRIPTION REF NO QTY. Auger Housing and Chute Gr oup - 24, 28 & 32 inch Footnote s 1 1931333 1 CARRIAGE BOLT, 5/16-18 x 3/4 G5 2 2860210 1 WASHER, Nylon 4 1960686 1 NUT, Hex Flange ESNA Light, 5/16-18 (Used on all models Except 24 in. Models) 5 1670578 1 KNOB, Internal Thread, 5/16 (Used Only on 24 in.
Auger Housing and Chute Gr oup - 24, 28 & 32 inch NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Coat top and bottom of chute ring with grease. Scraper blade should be on inside of housing. When installing cable, make sure it does not come into contact wi th muffler.
PART NO. DESCRIPTION REF NO QTY. Auger Housing and Chute Gr oup - 24, 28 & 32 inch Footnote s 42 1729724C 1 HOUSING AND IMPELLER ASSEMBLY, 24 in. 42 1729726C 1 HOUSING AND IMPELLER ASSEMBLY, 28 in. 42 1729728C 1 HOUSING AND IMPELLER ASSEMBLY, 32 in.
Auger Housing and Chut e Group - 38" Models NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Coat top and bottom of chute rin g with g rease. Scraper b lade should be on inside of housing. When installing cable, make sure it does no t come into contact wit h muffler.
PART NO. DESCRIPTION REF NO QTY. Auger Housing and Chut e Group - 38" Models Footnote s 1 1960001 3 SCREW, Hex Washer Head Pastite, 10-14 x 5/8 2 1931333 10 CARRIAGE BOLT, 5/16-18 x 3/4 G5 3 2860.
Auger Housing and Chut e Group - 38" Models NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Coat top and bottom of chute rin g with g rease. Scraper b lade should be on inside of housing. When installing cable, make sure it does no t come into contact wit h muffler.
PART NO. DESCRIPTION REF NO QTY. Auger Housing and Chut e Group - 38" Models Footnote s 45 1666613 3 HOLD DOWN, Chute 46 1717477A 1 GEAR, Chute The above parts group applies to the following Mfg. Nos.: 2005 31 © Copyright Simplicity Manufacturing, Inc.
Traction Drive Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Mounted ins ide of frame . Mo un t ed ou ts id e of frame. Grease I.D. teeth• and flan ge. Be s ure tie ba r s upp ort is in pl ace. Move axl e to left (as vie wed from back ) to t ake up e nd play .
PART NO. DESCRIPTION REF NO QTY. Traction Drive Group Footnote s 1 1930601 8 SCREW, Hex Washer Head Taptite, 5/16-18 x 5/8 2 1667341 4 RETAINER, Bearing 3 1722703 4 BEARING, Ball 4 1726856 1 SHAFT, He.
Traction Drive Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Mounted ins ide of frame . Mo un t ed ou ts id e of frame. Grease I.D. teeth• and flan ge. Be s ure tie ba r s upp ort is in pl ace. Move axl e to left (as vie wed from back ) to t ake up e nd play .
PART NO. DESCRIPTION REF NO QTY. Traction Drive Group Footnote s 45 1665521 1 BEARING, Ball 46 1666425 2 BUSHING, 3/4 ID x 1 OD x 3/4 LG, Powder Metal 47 1666855 1 BUSHING, 5/8 ID x 13/16 OD x 3/4 LG,.
Wheels & Tires Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 8 9 10 6 6 4 5 4 1 2 3 7 986549 The above parts group applies to the following Mfg. Nos.: 2005 36 © Copyright Simplicity Manufacturing, Inc. All Rights Reserved.
PART NO. DESCRIPTION REF NO QTY. Wheels & Tires Group Footnote s 1 1921978 1 CAPSCREW, Hex Head 5/16-18 x 2 G5 2 1919438 1 NUT, Hex Lock ESNA Light 5/16-18 NC-3B 3 1726743 1 WHEEL & TIRE ASSEMBLY, Snow R.H. (Used on 24 & 28 in. Models) 3 1726745 1 WHEEL & TIRE ASSEMBLY, Snow R.
Decal Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 171653 2 1726946 Au ger Disengage Au ger Enga ge 1727023 Traction Dise ngage Traction Engage Free H and Unlocked Free H and Locked AV OID S E RIOU S I NJU RY OR DE ATH • Read the o perat or's manu al fo r op eratin g an d safet y instructions.
PART NO. DESCRIPTION REF NO QTY. Decal Group Footnote s 1 1726945 1 DECAL, Dashboard EZ Turn L.H. (Tube Handle Models Only) 1 1727022 1 DECAL, Dashboard EZ T urn L.H. (CE) 2 1715557 1 DECAL, 5 4 3 2 1 R1 R2, Shift Pattern (T ube Handle Models Only) 3 1726946 1 DECAL, Auger Control R.
Headlight Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Existing Har d w are 1 2 5 4 6 7 3 986371 The above parts group applies to the following Mfg. Nos.: 2005 40 © Copyright Simplicity Manufacturing, Inc.
PART NO. DESCRIPTION REF NO QTY. Headlight Group Footnote s 1 1725291 1 HEADLIGHT ASEMBLY 2 1701011 2 TIE, Self Locking 3 2834683 1 CLIP, Wire 4 1709256A 1 LOCKWSHER, 5/16 5 1917372 1 NUT, Hex, 5/16-18 6 1725292C 1 BRACKET 7 1931333 1 CARRIAGE BOLT, 5/16-18 x 3/4 The above parts group applies to the following Mfg.
.
T orque Specification Chart FOR ST ANDARD MACHINE HARDW ARE (T olerance ± 20%) Hardware Grade SAE Grade 2 SAE Grade 5 SAE Grade 8 Size Of in/lbs in/lbs in/lbs Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm. 8-32 19 2.1 30 3.4 41 4.6 8-36 20 2.3 31 3.5 43 4.
500 N. Spring Street / PO Box 997 Port Washington, WI 53074-0997 USA www.simplicitymfg.c om MANUFACTURING, INC. © Copyright Simplicity Manufacturing, Inc.
デバイスSimplicity 1694867の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Simplicity 1694867をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSimplicity 1694867の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Simplicity 1694867の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Simplicity 1694867で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Simplicity 1694867を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSimplicity 1694867の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Simplicity 1694867に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSimplicity 1694867デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。