SMC NetworksメーカーSMC2804WBR38の使用説明書/サービス説明書
ページ先へ移動 of 82
SMC2804WBR.
.
38 T esla Ir vine, CA 92618 Phone: (949) 67 9-8000 Barricade TM 2.4 GHz 54 Mbps Wireless Cable/DSL Br oadband Router F rom SMC’ s Barricade line of Broadband Routers March 2003 Revision Number: R01.
COPYRIGHT Inf ormation furnished by SMC Networks, Inc. (SMC) is believ ed to be accur ate and reliab le. Howe v er , no responsibility is assumed b y SMC f or its use, nor f or any infringements of patents or other rights of third parties which may r esult from its use.
i C OMPLIANCES FCC - Class B This equipment has been tested and found to comply with the limits f or a Class B digital device , pursuant to P art 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Compliances ii EC Conf ormance Declaration - Class B SMC contact for these products in Europe is: SMC Networks Europe, Edificio Conata II, Calle F ructu ó s Gelaber t 6-8, 2 o , 4 a , 08970 - Sant Joan Desp í , Barcelona, Spain.
iii Industry Canada - Class B This digital apparatus does not e xceed the Class B limits f or radio noise emissions from digital apparatus as set out in the interference-causing equipment standard entitled “ Digital Apparatus, ” ICES-003 of the Depar tment of C ommunications.
Compliances iv Wichtige Sic herheit shinweise (Ge rmany) 1. Bitte lesen Sie diese Hinweise sorgf ä ltig durch. 2. Heben Sie diese Anleitung f ü r den sp ä teren Gebrauch auf. 3. V or jedem Reinigen ist das Ger ä t vom Stromnetz zu trennen. V erwenden Sie kei ne Fl ü ssigoder Aerosolreiniger .
v T ABLE OF C ONTENTS About the Wireless Barricade g Router . . . . . . . . 1 LED Indica tors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
T AB LE OF C ONTENTS vi Setup Wiza rd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Time Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Broadband Typ e . . . . . . . . . . . . . . . . . .
1 A BOUT THE W IRELESS B ARRICADE G R OUTER Congratulation s on your purc hase of the Wirele ss Barricade ™ g Broadband Router. SMC is proud to provide you with a power ful yet simple communication device for connecti ng your local area network (LA N) to the In ternet.
About the Wireless Barricade g Ro uter 2 Features and Benefits • Internet connecti on to DSL or cable modem via a 10/100 M bps WAN port • Local network connection via 10/100 Mbps Ethernet ports or 54 Mbps wireless interface ( supporting up to 253 mob ile users) • 802.
3 I NSTALLING THE W IRELESS B ARRICADE G R OUTER Before installing the Wireless Barricade ™ g Broadband Router, verify that you ha ve all the items listed under “ Package Contents. ” If any of the items are missing or dam aged, contact your local SMC distributor.
Installing the Wireless Barricade g Router 4 Please register on SMC ’ s Web site at www.smc.com The Wireless Barricade g Router is c overed by a limited lifetime warranty. Hardware Description The Router c an be connecte d to the Inte rnet or to a remote site using its RJ-45 WAN port.
Hardware Description 5 (i.e., allowin g these ports to be conn ected to any network device with straight-t hrough cable). The se ports can be connected directly to a PC or to a server equipped with an Ethernet ne twork interfac e card, or to a networking de vice such as an Ethernet hub or switch.
Installing the Wireless Barricade g Router 6 System Requirements You must have an ISP that mee ts the following minimum requirements: • Internet access from your local telephone compa ny or Internet Service Provide r (ISP) using a DSL modem, cable modem, ISDN TA, or PSTN ana log modem.
Connect the System 7 Connect the System The Router can be positio ned at any convenient locat ion in your office or home. No special wiring or cooling requirements are needed. You should, however comply with the following guidelines: • Keep the Router away from any heating devices.
Installing the Wireless Barricade g Router 8 3. P ower on : Connect the po wer adapter to t he Router . Figure 2. Connecti ng the Wireless Barr icade g Router Attach to Your Network Using Ethernet Cab.
Connect the System 9 Figure 3. Making the LAN Connections Attach to Your Network Using Radio Sign als Install a wireless network adapter in each computer that will be connected to the Inter net or your local net work via radio signals. SMC currently offers several wireless network cards, including the SMC2602W and SMC2632W Wireless cards.
Installing the Wireless Barricade g Router 10 radio link, or access other computers or network resources in the wired LAN infrastructu re or over the Intern et via the Router.
Connect the System 11 Attach the Wireless Barr icade g Router to the Intern et If Internet services ar e provided through an xDSL or cable modem, use u nshielded or shie lded twisted-pair Ethernet cable (Category 3 or gre ater) with RJ-45 plugs to conn ect the broadband mode m directly to the WAN port on t he Router.
12 C ONFIGURING C LIENT TCP/IP If you have not previously installed th e TCP/IP protocols on your client PCs, refer to the following section. If you need information on how to configu re a TCP/IP address on a PC, re fer to “ Setting Up TCP/IP ” on page 15.
Installing TCP/IP 13 5. Select Microsoft in the manuf acturers list. Select TCP/IP in the Networ k Protocols list. C lick the OK button to retur n to the Network window . 6. The TCP/IP protocol will be listed in the Network window . Click OK. The operating system ma y prompt y ou to restar t your system.
Configuring Clie nt TCP/IP 14 4. Double-clic k Protocol. 5. Choose Internet Protocol (TCP/IP). Clic k the OK b utton to retur n to the N etwork wind ow . 6. The TCP/IP protocol will be listed in the Network window . Click OK to complete the installation procedure.
Setting Up TCP/IP 15 Setting Up TCP/IP To access the I nternet thro ugh the Router , you must configure the network sett ings of the computers on your LAN to use the same IP subnet as the Router. The default network se ttings for the Router are : Gateway IP Address: 192.
Configuring Clie nt TCP/IP 16 3. On the Network window Configuration tab , double-clic k the TCP/IP entr y for y our networ k card. 4. Click the IP Address tab . 5. Click the “ Obtain an IP address “ optio n. 6. Ne xt click on the Gate wa y tab and verify the Ga tew a y field is blank.
Setting Up TCP/IP 17 8. On the Networ k Proper ties Window , click the OK button to sav e th ese new setting s. Note: Windows may ask you for the original Windows installation disk or additional files. Check for the files at c:windowsoptionscabs, or insert your Windows CD-ROM into your CDROM drive and check the correct file location, e.
Configuring Clie nt TCP/IP 18 Configuring Your Computer in Windows NT 4.0 1. From the Windows desktop click Start/Settin gs/Control Panel. 2. Double-clic k the Network icon. 3. Click on the Protocols tab . 4. Double-clic k TCP/IP Protocol. 5. Click on the IP Address tab .
Setting Up TCP/IP 19 7. Click on “ Obtain an IP address fr om a DHCP ser ver ” . 8. Click OK to close the window . 9. Windows ma y cop y files and will then prompt you to restar t your system. Clic k Y es and yo ur computer will shut down and restar t.
Configuring Clie nt TCP/IP 20 4. T ype EXIT and pr ess <ENTER> to close the Co mmand Prompt window . Configuring Your Computer in Windows 2000 1. Access your N etwork settings by clicking Start, then choose Settings and then select Control Panel.
Setting Up TCP/IP 21 5. Select “ Obtain an IP ad dress automatically ” to configure y our computer f or DHCP . Click the OK bu tton to sav e this change and close the Proper ties windo w . 6. Click the OK b utton again to sav e these ne w changes.
Configuring Clie nt TCP/IP 22 3. the Local Area Conn ection Properties box, v erify the bo x next to Internet Protocol (TCP/IP) is ch eck ed. Then highlight the Internet Protocol (TCP/IP), and clic k the Properties button. 4. Select “ Obtain an IP ad dress automatically ” to configure y our computer f or DHCP .
Setting Up TCP/IP 23 Manual IP Configuration 1. Check Specify an IP address on t he IP Address tab. Enter an IP address based on the defa ult network 192.168.2. x (where x is between 2 and 254), and use 255.255.255.0 for the subnet mask. 2. In the Gatewa y tab , add the IP address of the Rou ter (default: 19 2.
Configuring Clie nt TCP/IP 24 3. On the DNS Configuration tab , add the IP address f or the Router and clic k Add. This automatically rela ys DNS requests to the DNS server(s) pro vided b y y our ISP . Otherwise, add specific DNS ser v ers into the DNS Ser v er Search Order field and clic k Add .
Setting Up TCP/IP 25 Pinging 192.168.2.1 with 32 bytes of data: Request timed out. there may be something wrong in your in stallation procedur e. Check the following items in sequence: 1.
26 C ONFIGURING THE W IRELESS B ARRICADE G R OUTER The Wireless Barricade g Route r can be configured by any Java-supported br owser including Intern et Explorer 4.0 or above, or Netscape Navigator 4.0 or abo ve. Using the Web management inter face, you can configu re the Router and view statistics to monitor ne twork activity.
Disable Proxy Connection 27 Disable Proxy Connection You will also need to verify that the HTTP Proxy feature of your web browser is disabled. This is so that your web browser will be able to view the Router configurat ion pages. The following steps are for Intern et Explorer and for Net scape.
Configuring t he Wireless Barricad e g Router 28 Netscape (4 or above) 1. Open Netscape. Click Edit, and then select Preferences. 2. In the Pref erences win dow , under Category , double-clic k Adv anced, then se lect the Pro xies o ption. 3. Check “ Direct connectio n to the Inter net.
Navigating the Web Browser Interface 29 Navigating the Web Browser Interface The Router ’ s management in terface feat ures a Setup Wizard a nd an Advanced Setup se ction. Use the Setup Wizar d if you want to quickly set up the Router fo r use with a cable modem or DSL modem.
Configuring t he Wireless Barricad e g Router 30 Setup Wizard Time Zone Click on the Setup Wizard picture. The first item in the Setup Wizard is Time Zone setup. For accurate timing of clien t filtering and log events, you need to set the time zone. Sele ct your time zo ne from the drop- down list, and click NEXT.
Setup Wizard 31 Broadband Type Select the type of br oadband connection you have. For a cable modem connect ion see the following page. Fo r a Fixed-IP xDSL connection see “ Fixed-IP xDSL ” on pa ge 32, and for a PPPoE xDSL connection, see “ PPPoE ” on page 32.
Configuring t he Wireless Barricad e g Router 32 Fixed-IP xDSL Some xDSL In ternet Service Providers may assign a fixed (static) IP addre ss. If you have been provided with this information, choose this option and enter the assigned IP address, gateway IP address, DNS IP addresses, and subnet mask.
Advanced Setup 33 Advanced Setup Use the Web management int erface to define syst em parameters, ma nage and control the Ro uter and its ports, or monitor network condit ions.
Configuring t he Wireless Barricad e g Router 34 System Time Zone Sets the time zone f or the Router. This informat ion is used for log entries and client access contr ol. Status Provides WAN connection type and status, firmware and hardware version numbers, system IP settings, as well as DHCP, NAT, and Firewall information.
Advanced Setup 35 Password Settings Use this menu to restrict access based on a password. By default, there is n o password. For security you should assign o ne before exposing th e Router to the Inte rnet. Passwords can contain f rom 3 – 12 alphanume ric characters and are not case sensitive.
Configuring t he Wireless Barricad e g Router 36 Remote Management Remote Mana gement allows a remote PC to c onfigure, mana ge, and monitor the Rout er using a standard Web br owser. Check Enable and enter the IP ad dress of the rem ote host. Click APPLY.
Advanced Setup 37 Dynamic IP The Host Name is optio nal, but may be req uired by some ISPs. The default MAC ad dress is set to the WAN ’ s physical interface on the Router. Use this address when r egistering for Internet service, and do not ch ange it unless required by your ISP.
Configuring t he Wireless Barricad e g Router 38 Point-to-Point Over Ethernet (PPPoE) Enter the PPPoE User Name and Password assigned by your Service Provider. The Service Name is normally optional, but may be required by some service pr oviders. The MTU (Maximum Transm ission Unit) governs th e maximum size of the d ata packets.
Advanced Setup 39 Point-to-Point Tunneling Protocol (PPTP) Point-to-Point Tunneli ng Protocol (PPTP) can be used to join different physical networks using the Internet as an in termediary. Using the above screen allows client PCs to esta blish a normal PPTP session and provides ha ssle-free conf iguration of the PPTP client on each client PC.
Configuring t he Wireless Barricad e g Router 40 Static IP Address If your Internet Service Provider has assigned a fixed IP address, enter the assigned add ress and subnet mask for th e Router, then enter the gateway addres s of your ISP. You may need a fixed add ress if you want to provide In ternet services, such as a Web server or FTP server.
Advanced Setup 41 DNS Domain Name Servers map numeri cal IP addresses to the equivalent domain name ( e.g., www.smc.com). Your ISP should provide the IP address of on e or more domain name servers.
Configuring t he Wireless Barricad e g Router 42 LAN • LAN IP – Use the LAN menu to configu re the LAN IP addr ess for the Router and to enable the DHCP se rver for dynamic client address allocation. • Set a period for th e lease time if require d.
Advanced Setup 43 Wireless To configure the Router as a wireles s access point for wireless clients (either stationary or roaming), all you need to do is define the radio channel, the Service Set identifie r (SSID), and encryption options.
Configuring t he Wireless Barricad e g Router 44 Transmission Ra te : Set the da ta rate trans mitted from the Router . The lower the data rate, the longer the transmission d istance. (De fault: Fully Automatic.) Channel : The radio channel throug h which the Router communicates with PCs in its BSS.
Advanced Setup 45 If you are transm itting sensitive data across wireless channe ls, you should en able Wired Equivalent Privacy (WEP) encryption. Encryption re quires you to use the same se t of encryption /decryption keys for the Rou ter and all of your wireless clients.
Configuring t he Wireless Barricad e g Router 46 If you use encryption, configure the same keys used for the Router on each of your wireless clie nts. Note that Wir ed Equivalent Priv acy (WEP) protects data transmitted between wireless nodes, but does not protect any tr ansmissions over your wired network or over the I nternet.
Advanced Setup 47 Network Address Translation (NAT) From this section you can configure the Add ress Mapping, Virtual Server, and Spe cial Application featu res that provide con trol over the port openings in th e router ’ s firewall.
Configuring t he Wireless Barricad e g Router 48 Virtual Server If you configure the Route r as a virtual server, remote use rs accessing services such as Web or FTP at your local site via public IP addresses can be automatically redirected t o local servers configured wi th private IP addresses.
Advanced Setup 49 Special Applic ations Some applications, su ch as Internet gaming , videoconferencing, Internet te lephony and ot hers, require multiple conne ctions.
Configuring t he Wireless Barricad e g Router 50 For a full list of ports a nd the services that run on them, see www.iana.org/assignm ents/port-numbe rs.
Advanced Setup 51.
Configuring t he Wireless Barricad e g Router 52 MAC Filtering Table The MAC Filtering featur e of the Router allows you to control access to your net work to up to 32 clients based on the MAC (Media Access Control) Address of the c lient machine. This ID is unique to each network adapter .
Advanced Setup 53 URL Blocking To configure the URL Blocking f eature, use the table below to specify the website s (www.somesite .com) and/or keyw ords you want to filter on your networ k. To complete this configuration, you will need to create or modify an access rule in “ Access Control ” on page 50.
Configuring t he Wireless Barricad e g Router 54 Schedule Rule The Schedule Rule feature allows you to configure specific rules based on Time and Date. These rules can then be used to configure more specific Access Control. Enables Schedule-based Int ernet access control.
Advanced Setup 55 Intrusion Detection.
Configuring t he Wireless Barricad e g Router 56 • SPI and Anti-DoS firewall protection (Defa ult: Enabled) – The Intrusion Detection Feat ure limits access for incoming traffic at th e WAN port.
Advanced Setup 57 • Stateful Packet Inspection – This is c alled a “ statef ul ” packet inspection because it examines the co ntents of the packet to determine th e state of the communi cations; i.e., it ensures th at the stated destina tion computer has pr eviously requested the current commu nication.
Configuring t he Wireless Barricad e g Router 58 DoS Criteria and Port Scan Criteria Set up DoS an d port scan crite ria in the sp aces provided (as shown below ). Parameter Defaults Description Fragmentation half-open wait 10 sec Configures the number of seconds that a packet state structure remains active.
Advanced Setup 59 DMZ If you have a client PC that cannot run an Int ernet application properly from behind the firewall, then you can open the clie nt up to unrestr icted two-wa y Internet access.
Configuring t he Wireless Barricad e g Router 60 (Demilitarized Zone) may expose your local network to a variety of security risks, so only use this option as a last resort.
Advanced Setup 61 This DNS feature is powered by TZO.com. With a DDNS connection you can host your own web site, email server , FTP site, and more at your own locatio n even if you have a dynam ic IP address. (Default : Disable) UPnP (Universal Plug and Play) Setting Enable UPnP by checking ON in the screen above.
Configuring t he Wireless Barricad e g Router 62 Tools Use the Tools menu to backu p the current config uration, resto re a previously saved con figuration, restore fact ory settings, up date firmware , and reset the Router . Tools - Configuratio n Tools • Backup – saves the Router ’ s configuration to a file.
Advanced Setup 63 Tools - Firmware Upgrade Use this screen to update the f irmware or user int erface to the latest version s. Download the upgrad e file from the SMC Web site (www.smc.com) and save it to your hard drive. In the Upgrade Target field , choose Firmware.
Configuring t he Wireless Barricad e g Router 64 Tools - Reset Click APPLY to reset the Router. The reset will be complete when the power LED stop s blinking.
Advanced Setup 65 Status The Status screen displays WAN/LAN connectio n status, firmware, and hard ware version nu mbers, illega l attempts t o access your network, as well as information on DHCP clients connected to your network.
66 T ROUBLESHOOTING The information outlin ed in this section describes some useful steps for getting yo ur computer and th e Router online. A. Verif y your connection to the Router If you are unable to access the Router ’ s web-based administrat ion pages then you may not be proper ly connected or configured.
Troubleshooting 67 If you have an IP address that starts with 169.254.XXX.XXX then see the next section. If you have another IP ad dress configured, then see se ction C. B. I am get ting an IP Address th at starts wit h 169.254.XXX.XXX If you are getting this IP Ad dress, then you need to check that you are prope rly connected to the Rout er.
Troubleshooting 68 3. Then type ipco nfig/rene w . D. The 10/ 100 LED does not light aft er a connection is made . 1. Check that the ho st computer an d hub are both power ed on.
69 S PECIFICATIONS Below is an outline of the Technical Specifications for the SMC2804WBR. Standards IEEE 802.3 10BASE-T Ether net IEEE 802.3u 100BASE-TX F astEthernet IEEE 802.
Specifications 70 Input Power 9 V , 1 A Maximum Current 0.04 A RMS m ax. @ 110V/240V Power Consumption 5 W atts max. @ 1 00-240 V AC Internet Standards RFC 826 ARP , RFC 791 IP , RFC 792 ICMP , RFC 76.
.
FOR TECHNICAL SUPPORT , CALL: Fr om U.S.A. and Canada (24 hours a day , 7 days a week) (800) SMC-4-YOU; Phn: (949) 679-8000; F ax: (949) 679-1481 Fr om Europe (8:00 AM - 5:30 PM UK Time) 44 (0) 118 974 8700; F ax: 44 (0) 118 974 8701 INTERNET E-mail addresses: techsupport@smc.
デバイスSMC Networks SMC2804WBR38の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
SMC Networks SMC2804WBR38をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSMC Networks SMC2804WBR38の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。SMC Networks SMC2804WBR38の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。SMC Networks SMC2804WBR38で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
SMC Networks SMC2804WBR38を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSMC Networks SMC2804WBR38の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、SMC Networks SMC2804WBR38に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSMC Networks SMC2804WBR38デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。