SnapperメーカーBroadmoor 2600の使用説明書/サービス説明書
ページ先へ移動 of 102
Parts Manual Rev. 04/2004 Broadmoor / 1600 / 2600 Series Lawn Tractors & Mower Decks TP 400-2529-02-BM-SMA Mf g . No. Descri p tion 1 6 HP Tractors 1694009 Broadmoor, 16HP Hydro (Kohler) 1694010 B.
.
Table Of Content s Torque Specification Chart ...... ............................ ......................... .......... Inside Back Cover PRODUCT COMPONENTS PAGES Frame & Front Axle Gr oup ...........................................................
Frame & Front Axle Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Torq ue to 150 ft. lbs. (202 Nm) Torque to 22-4 0 ft. lbs. (30-5 4 Nm) Torque to 13 f t. lbs. Servic e Ki t 168 6985 Torque to 50-5 7 ft. lbs.
PART NO. DESCRIP TION REF NO QTY. Frame & Front Axle Group Footnote s 1 1930645 7 NUT, Hex Flange Lock, 3/8-16 2 1960035 2 WASHER 3 960646 1 NUT, Hex Flange, 5/8-11 4 1722212 1 PLATE, Axle 5 17240.
Frame & Front Axle Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Torq ue to 150 ft. lbs. (202 Nm) Torque to 22-4 0 ft. lbs. (30-5 4 Nm) Torque to 13 f t. lbs. Servic e Ki t 168 6985 Torque to 50-5 7 ft. lbs.
PART NO. DESCRIP TION REF NO QTY. Frame & Front Axle Group Footnote s 42 1919394 1 WASHER 43 932577 1 RETAINING RING The above parts group applies to the following Mfg.
Steering Group - Manual Steering NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Torque to 36-44 ft. lbs. or 48-60 Nm Steering cap snaps over steering wheel. Use washers as required. Torque to 36-44 ft. lbs. or 48-60 Nm Bearin g mounts be low frame.
PART NO. DESCRIP TION REF NO QTY. Steering Group - Manual Steering Footnote s 1 1722318 1 STEERING WHEEL, Straight, Shaft 2 1722319 1 CAP, Steering Wheel, SMI Logo 2 1725024 1 CAP, Steering Wheel, Pla.
Engine & Electric Clutch Group - 16HP & 18HP B riggs & Stratton, Vanguard NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Engine Manufactur er Ga sket & Ha rdw are, Torque to 18 ft. l bs. (25 N m) Tie clutch wir e to keep away from pu lley.
PART NO. DESCRIP TION REF NO QTY. Engine & Electric Clutch Group - 16HP & 18HP B riggs & Stratton, Vanguard Footnote s 1 1723165 1 HOSE, Oil Drain, 10-1/2" Long, 3/8-18 Fittings 2 * 1.
Engine & Electric Clutch Group - 16HP Briggs & Str atton, INTEK NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Engine Manufactur er Gas k et & H ar dwa r e, Torque to 18 ft. l bs. (25 N m) Tie clutch wir e to keep away from pu lley.
PART NO. DESCRIP TION REF NO QTY. Engine & Electric Clutch Group - 16HP Briggs & Str atton, INTEK Footnote s 1 1723165 1 HOSE, Oil Drain, 10-1/2" Long, 3/8-18 Fittings 2 * 1 ENGINE, 16HP .
Engine & Electric Clutch Group - 16HP Honda NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Torque to 18 ft. l bs. (25 Nm) Tie clutc h wire to keep away from pulley. Torque to 45-5 0 ft . lbs . (61-68 Nm) Torque to 19-23 ft.
PART NO. DESCRIP TION REF NO QTY. Engine & Electric Clutch Group - 16HP Honda Footnote s 1 934683 2 CLIP, Wire 1/8 2 960656 2 CAPSCREW, Hex Head, M06-1 x 12MM 3 1723526 1 SHIELD, Manifold, RH 4 17.
Engine & Electric Clutch Group - 16HP Kohler NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Engine M anufact urer Gaske t & Ha rdwar e, Torqu e to 18 ft . lbs . (25 Nm) Tie clutch wire to keep away from pulley.
PART NO. DESCRIP TION REF NO QTY. Engine & Electric Clutch Group - 16HP Kohler Footnote s 1 1723165 1 HOSE, Oil Drain, 10 1/2 Lon g, 3/8-18 Fittings 2 * 1 ENGINE, 16HP Kohler, Single, Model CV460S.
Transmission Group - Tuff Torq K-57 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Spring to be compressed to 2-1/2 inches with brak e locked .
PART NO. DESCRIP TION REF NO QTY. Transmission Group - Tuff Torq K-57 Footnote s 1 1960676 2 SCREW, Pan Head Torx Taptite, 1/4-20 x 1-1/4, Black 2 1722345 1 PAD, Footrest, LH, without Differential Loc.
Transmission Group - Tuff Torq K-62 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Spring to be compress ed to 2-1/2 inches w i th brake locked. Torque nut to 19 - 21 ft. lbs. (26 - 28 Nm) Torque nut to 28 - 33 ft.
PART NO. DESCRIP TION REF NO QTY. Transmission Group - Tuff Torq K-62 Footnote s 1 1960678 2 CAPSCREW, Pan Head Trox Taptite, 1/4-20 x 1-1/4, Black 2 1722345 1 PAD, Footrest, LH, W/O Differential Lock.
Transmi ssion SERVICE PA RTS - Tuff Torq K-57A NOTE: Unless noted otherwise, use the standard hardware torque specification chart. SEAL SIDE; O UTER THI CK BEARIN G RACE SHOULD C ONTACT PISTO NS.
PART NO. DESCRIP TION REF NO QTY. Transmi ssion SERVICE PA RTS - Tuff Torq K-57A Footnote s 1 1724316 1 RING, SNAP 2 1724315 1 LOCKWASHER 3 1724314 1 FAN 4 1724312 2 COLLAR, SPLINE 5 1718076 3 RING E1.
Transmi ssion SERVICE PA RTS - Tuff Torq K-57A NOTE: Unless noted otherwise, use the standard hardware torque specification chart. SEAL SIDE; O UTER THI CK BEARIN G RACE SHOULD C ONTACT PISTO NS.
PART NO. DESCRIP TION REF NO QTY. Transmi ssion SERVICE PA RTS - Tuff Torq K-57A Footnote s 43 1724954 1 FILTER 44 1724947 1 SHAFT, REDUCTION 45 1724948 2 WASHER, 12 x 32 x 3.
Transmi ssion SERVICE PA RTS - Tuff Torq K-57A NOTE: Unless noted otherwise, use the standard hardware torque specification chart. SEAL SIDE; O UTER THI CK BEARIN G RACE SHOULD C ONTACT PISTO NS.
PART NO. DESCRIP TION REF NO QTY. Transmi ssion SERVICE PA RTS - Tuff Torq K-57A Footnote s 85 1708691 2 PACKING 86 1724281 1 SHAFT, BYPASS The above parts group applies to the following Mfg. Nos.: 2004 27 © Copyright Simplicity Manufacturing, Inc. All Rights Reserved.
Transmi ssion SERVICE PA RTS - Tuff Torq K-62K NOTE: Unless noted otherwise, use the standard hardware torque specification chart. THI CKE R PLATE THI CKE R PLATE 11 77 15 19 12 14 16 13 30 22 29 88 2.
PART NO. DESCRIP TION REF NO QTY. Transmi ssion SERVICE PA RTS - Tuff Torq K-62K Footnote s 1 1718100 2 PIN 6.0A x 4.0 2 1724705 1 PIN 3 1724706 1 LEVER, CONTROL 4 1718039 1 SHOCK ABSORBER 5 1724704 1.
Transmi ssion SERVICE PA RTS - Tuff Torq K-62K NOTE: Unless noted otherwise, use the standard hardware torque specification chart. THI CKE R PLATE THI CKE R PLATE 11 77 15 19 12 14 16 13 30 22 29 88 2.
PART NO. DESCRIP TION REF NO QTY. Transmi ssion SERVICE PA RTS - Tuff Torq K-62K Footnote s 43 1724752 1 GEAR, MOTOR 44 1724751 1 E, RING MOTOR 45 1724723 1 DISC, BRAKE 46 1724725 1 SHIM SET 47 1724724 1 SHOE, BRAKE 48 1724726 1 ACTUATOR, BRAKE 49 1724714 1 SHAFT, FINAL PINION 50 1724715 2 WASHER, 15 x 32 x 3.
Transmi ssion SERVICE PA RTS - Tuff Torq K-62K NOTE: Unless noted otherwise, use the standard hardware torque specification chart. THI CKE R PLATE THI CKE R PLATE 11 77 15 19 12 14 16 13 30 22 29 88 2.
PART NO. DESCRIP TION REF NO QTY. Transmi ssion SERVICE PA RTS - Tuff Torq K-62K Footnote s 85 1724727 1 SHAFT, BRAKE HL #10 86 1724728 1 WASHER, 16 x 23 x 1.6 87 1708690 1 PACKING 88 1724722 1 SPRING, BRAKE 89 1724721 1 ARM, BRAKE The above parts group applies to the following Mfg.
Lift Group - Manual Lift NOTE: Unless noted otherwise, use the standard hardware torque specification chart. To Ref. No. 1 6 Instal l int o lef t hand side of lower dash. 2 16 15 12 11 13 17 7 5 9 8 4 6 3 10 18 19 12 20 21 1 14 2 12 985893 The above parts group applies to the following Mfg.
PART NO. DESCRIP TION REF NO QTY. Lift Group - Manual Lift Footnote s 1 1722285 1 COVER, Dash 2 1924940 2 WASHER 3 1721789 1 ROD 4 1722024 1 ROD, Lift 5 1722302 1 GRIP, Black Vinyl 6 1923341 2 CAPSCRE.
Lift Group - Manual Lift NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Install into left ha nd side of lower da sh. 4 5 3 6 1 9 2 8 10 13 14 11 18 17 16 5 12 5 7 15 986412 The above parts group applies to the following Mfg.
PART NO. DESCRIP TION REF NO QTY. Lift Group - Manual Lift Footnote s 1 1722302 1 GRIP, Black Vinyl 2 1722024 1 ROD, Lift Lever with Flats 3 1930645 1 NUT, Hex Flange Lock, 3/8-16 4 1924940 1 WASHER 5.
Controls Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 11 17 19 12 18 14 13 20 21 27 29 22 28 23 25 4 30 31 37 35 30 32 38 34 36 33 1 5 9 2 8 4 6 3 10 1 5 6 10 15 16 24 24 26 15 35 41 40 39 18 7 8 985882 The above parts group applies to the following Mfg.
PART NO. DESCRIP TION REF NO QTY. Controls Group Footnote s 1 1721353 1 ROD, Brake Lock 2 1721891 1 KNOB, Push On, Red Plastic "P" 3 1930591 1 CAPSCREW, Hex Flange Whiz Lock, 5/16-18 x 3/4 4.
Cruise Control Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Control Ar m from tr ansmission group. Brake ar m at idle r pivot. Hol e "A" Hook into hole "A" of frame. Instal l rounded edge of washer toward lever & bracket ass embly.
PART NO. DESCRIP TION REF NO QTY. Cruise Control Group Footnote s 1 1723713 1 DECAL, Cruise & Lift 2 1960666 1 SCREW, Torque Head Plus Socket Head, 1/4-20 x 7/8 3 1722303 1 KNOB, Cruise 4 1920397 .
Electrical Group - Honda Engine NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Cru is e Sw itch (See Controls Group for Mounting Hardware) To Engine Sta rter Headl.
PART NO. DESCRIP TION REF NO QTY. Electrical Group - Honda Engine Footnote s 1 1721810 1 HEADLIGHT ASSEMBLY, 4 Blub, (Incudes Ref. Nos. 2 & 3) 2 1677371 4 BULB, Headlight, 12.
Electrical Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. To Engine St arte r Headlight Switc h DASH MOUNTED HOOD MOU NTE D UNDER HOO D UNDER HOOD UNDER S EA.
PART NO. DESCRIP TION REF NO QTY. Electrical Group Footnote s 1 1721810 1 HEADLIGHT ASSEMBLY, 4 Bulb, (Includes Ref. Nos. 2 & 3) 2 1677371 4 BULB, Headlight, 12.
Hood, Grill & Dash Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Secure to bo ttom LH soleno id mounting ho le. 9 14 10 11 13 8 1 4 7 6 3 5 2 8 3 3 12 985896 The above parts group applies to the following Mfg.
PART NO. DESCRIP TION REF NO QTY. Hood, Grill & Dash Group Footnote s 1 1721804 1 PANEL, RH Side, Orange 1 41721804 1 PANEL, RH Side, Red 2 1721801 1 HOOD, Orange 2 41721801 1 HOOD, Red 3 1960295 .
Seat & Seat Deck Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Torque to 14-19 in. lbs. (19 - 25.8 Nm) Torque to 25-30 in.
PART NO. DESCRIP TION REF NO QTY. Seat & Seat Deck Group Footnote s 1 1722129 1 BRACKET, 1-5/8 x 1-3/4 2 1722307 1 * SEAT, 18" Back, Optional 2 1722306 1 * SEAT, 15" Back, Standard 3 172.
Wheels & Tires Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Fron t Wheels Rear Wh eels Use as requi red. Use as req uired . 11 4 4 9 2 10 3 5 8 12 10 7 1 14 15 16 17 6 13 8, 18 7, 20 19 6 W985913 The above parts group applies to the following Mfg.
PART NO. DESCRIP TION REF NO QTY. Wheels & Tires Group Footnote s 1 1722065 2 WHEEL & TIRE ASSEMBLY, Front, (Includes Ref. Nos. 2, 3, 4, 5, & 6) 2 1722838 1 TIRE, 15 x 6, Super Turf 3 1664090 1 TUBE, Tire, Front, 4.
Decals - Brand & Model NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 7 1 2 2 3 4 5 6 8 9 11 10 4 12 B985913 The above parts group applies to the following Mfg. Nos.: 2004 52 © Copyright Simplicity Manufacturing, Inc.
PART NO. DESCRIP TION REF NO QTY. Decals - Brand & Model Footnote s 1 1717692 1 DECAL, ICON Simplicity, Orange 2 1722551 3 DECAL, Simplicity, Silver & Blue w/Icon 3 1722776 1 DECAL, Broadmoor,.
Decals - Safe ty & Co mmon NOTE: Unless noted otherwise, use the standard hardware torque specification chart. DA NG E R OPERATING O N SLOPES CAN BE DANGER OUS SEE OPERATOR 'S MANUAL. IF YOU CAN NOT BACK -UP A HILL, DO NOT DRIV E ON IT. ROTATING BLADES CUT OFF ARMS AND LEGS STOP MOWER WHEN CHILDRE N ARE NEAR.
PART NO. DESCRIP TION REF NO QTY. Decals - Safe ty & Co mmon Footnote s 1 1722806 1 DECAL, Ignition Switch Symbols, White/Black 2 1718025 1 DECAL, Automatic Control Traction 3 1722549 1 DECAL, 16H.
38" Mower Deck - Belt , Idler Arm & Hitch NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Insert Must Face Out M oun t H i tc h A ss em b l y an d Leveli ng Adju stment R od using upper set of ho les Hook Spring to Belt Guide Hook Spring {Ref 22 } here when assembled.
PART NO. DESCRIP TION REF NO QTY. 38" Mower Deck - Belt , Idler Arm & Hitch Footnote s 1 1723025 1 V-BELT 2 1928957 2 CAPSCREW, Hex Head, 3/8-16 x 2-3/4 3 1677135 1 GUARD, Belt 4 1922755 4 WASHER, Plain, 3/8 5 1716553 1 SPACER 6 1685150 1 PULLEY (Includes Ref.
38" Mower Deck - Height Adjustment & Roller Bar NOTE: Unless noted otherwise, use the standard hardware torque specification chart. GREASE Insert Must Face Out Insert Must Face Out GREASE Ins.
PART NO. DESCRIP TION REF NO QTY. 38" Mower Deck - Height Adjustment & Roller Bar Footnote s 1 1930644 2 NUT, Hex Flange Lock, 1/2-13 2 1686686 1 SHAFT & BAR ASSEMBLY (Includes Ref.
38" Mower Deck - Height Adjustment & Roller Bar NOTE: Unless noted otherwise, use the standard hardware torque specification chart. GREASE Insert Must Face Out Insert Must Face Out GREASE Ins.
PART NO. DESCRIP TION REF NO QTY. 38" Mower Deck - Height Adjustment & Roller Bar Footnote s 43 1704115 1 PLATE, Support 44 1922606 1 CAPSCREW, Hex Head, 3/8-16 x 1-3/4 45 1704093 1 ROD, Adjustment 46 1706644 1 SPACER 47 1722036 2 ROLLER The above parts group applies to the following Mfg.
38" Mower Deck - Housin g, Arbors & Blades NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Viewed From Bottom Torque to 50-70 ft. lbs. Torque to 45-55 ft. lbs. Apply gasket former to this surface if foam gasket is not used.
PART NO. DESCRIP TION REF NO QTY. 38" Mower Deck - Housin g, Arbors & Blades Footnote s 1 1705449 1 DEFLECTOR, Plastic 2 1960518 1 NUT, Push 3 1960353 2 WASHER, Plain 4 1704873 1 CLAMP 5 1916.
40" Mower Deck - Belt , Idler Arm & Hitch NOTE: Unless noted otherwise, use the standard hardware torque specification chart. To Slot "A" To Slot "B" Slot " B" S.
PART NO. DESCRIP TION REF NO QTY. 40" Mower Deck - Belt , Idler Arm & Hitch Footnote s 1 1919439 2 NUT, Hex Lock Esna Light, 3/8-16 2 1924940 5 WASHER, 3/8 3 1725408 1 PULLEY, Idler, 4" O.
40" Mower Deck - Belt , Idler Arm & Hitch NOTE: Unless noted otherwise, use the standard hardware torque specification chart. To Slot "A" To Slot "B" Slot "B" Sl.
PART NO. DESCRIP TION REF NO QTY. 40" Mower Deck - Belt , Idler Arm & Hitch Footnote s 1 1919439 1 NUT, Hex Lock Esna Light, 3/8-16 2 1924940 6 WASHER, 3/8 3 1725408 1 PULLEY, Idler 4 1723391.
40" Mower Deck - Height Adjustment & Roller Bar NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Apply Locktite 380 in hole prior to assemb ly.
PART NO. DESCRIP TION REF NO QTY. 40" Mower Deck - Height Adjustment & Roller Bar Footnote s 1 1722661 1 ROD 2 1924940 5 WASHER, 3/8 3 1922606 1 CAPSCREW, Hex Head, 3/8-16 x 1 3/4 4 1917421 1.
40" Mower Deck - Height Adjustment & Roller Bar NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Apply Locktite 380 in hole prior to assemb ly.
PART NO. DESCRIP TION REF NO QTY. 40" Mower Deck - Height Adjustment & Roller Bar Footnote s 43 1933988 4 NUT, Push, 5/16 44 1665374 3 STRAP, Roller Support 45 1720919 1 DECAL, Height of Cut .
40" Mower Deck - Housin g, Arbors & Blades NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Torque to 50-70 ft.
PART NO. DESCRIP TION REF NO QTY. 40" Mower Deck - Housin g, Arbors & Blades Footnote s 1 1931318 1 CARRIAGE BOLT, 1/4-20 x 7/8 2 1960518 1 NUT, Push 3 1960353 2 WASHER, 1/4 4 1704873 1 CLAMP.
40" Mower Deck - Housin g, Arbors & Blades NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Tor que to 4 5-55 ft .
PART NO. DESCRIP TION REF NO QTY. 40" Mower Deck - Housin g, Arbors & Blades Footnote s 1 1930584 1 CAPSCREW, Hex Head, 7/16-14 x 2-3/4 G8 2 1933263 1 WASHER, 7/16 3 1656916 4 WASHER, Spring .
44" Mower Deck - Belt , Idler Arm & Hitch NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Engine Pulley Movable Idler Pulley Arbor Drive Pulley Arbor Drive.
PART NO. DESCRIP TION REF NO QTY. 44" Mower Deck - Belt , Idler Arm & Hitch Footnote s 1 1601672 1 V-BELT, Mower Drive 2 1721532 1 V-BELT, Arbor Drive 3 1665835 1 GRIP, Lever 4 1916950 2 NUT,.
44" Mower Deck - Height Adjustment & Roller Bar NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Insert Must Face Out Insert Must Face Out GREASE Feet tow a.
PART NO. DESCRIP TION REF NO QTY. 44" Mower Deck - Height Adjustment & Roller Bar Footnote s 1 1685443 1 SHAFT & BAR ASSEMBLY, 44" (Includes Ref.
44" Mower Deck - Height Adjustment & Roller Bar NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Insert Must Face Out Insert Must Face Out GREASE Feet tow a.
PART NO. DESCRIP TION REF NO QTY. 44" Mower Deck - Height Adjustment & Roller Bar Footnote s 43 1704083 1 ARM, Rear, Mower, RH 44 1921977 2 CAPSCREW, Hex Head, 5/16-18 x 1-1/4 45 1704087 1 TR.
44" Mower Deck - Housin g, Arbors & Blades NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Torque nuts to 50-70 ft. lbs. (67-95 Nm.) Torque screws to 45-55 ft. lbs. (61-75 Nm) Apply gasket former to this surface if foam gasket is not used.
PART NO. DESCRIP TION REF NO QTY. 44" Mower Deck - Housin g, Arbors & Blades Footnote s 1 1714419 3 NUT, Hex Flange, 9/16-18 2 1713675 6 WASHER, Bellevilled, 9/16 3 1713161 1 PULLEY, 4-1/2 O.D. 4 1713158 1 HUB, Double Pulley 5 1713098 3 PULLEY, 4-1/4 O.
44" Mower Deck - Housin g, Arbors & Blades NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Torque nuts to 50-70 ft. lbs. (67-95 Nm.) Torque screws to 45-55 ft. lbs. (61-75 Nm) Apply gasket former to this surface if foam gasket is not used.
PART NO. DESCRIP TION REF NO QTY. 44" Mower Deck - Housin g, Arbors & Blades Footnote s 42 1927557 2 NUT, Hex Flagne Whiz Lock, 5/16-18 43 1724538 1 BAFFLE, Blowout, 44" & 50" The above parts group applies to the following Mfg. Nos.
44" Mower Deck - Housin g, Arbors & Blades NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Torque nuts to 5 0-70 ft. lb s. (67-95 Nm.) Torque sc rews to 45-55 ft. lb s. (61- 75 Nm) Apply gaske t former to this s urface if foam ga sket is no t used .
PART NO. DESCRIP TION REF NO QTY. 44" Mower Deck - Housin g, Arbors & Blades Footnote s 1 1714419 3 NUT, Hex Flange, 9/16-18 2 1713675 6 WASHER, Bellevilled, 9/16 3 1713161 1 PULLEY 4 1713158.
44" Mower Deck - Housin g, Arbors & Blades NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Torque nuts to 5 0-70 ft. lb s. (67-95 Nm.) Torque sc rews to 45-55 ft. lb s. (61- 75 Nm) Apply gaske t former to this s urface if foam ga sket is no t used .
PART NO. DESCRIP TION REF NO QTY. 44" Mower Deck - Housin g, Arbors & Blades Footnote s 42 1931333 8 CARRIAGE BOLT, 5/16-18 x 3/4, Black (CE Only) 43 1927557 8 NUT, Hex Flange Whiz Lock, 5/16-18, Black (CE Only) 44 1716878 1 BAFFLE, Anti-Blowout, RH (CE Only) The above parts group applies to the following Mfg.
50" Mower Deck - Cl ut ch & Support NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Engine Pul ley Movable Idler Pul le y Arbor Drive Pul ley Arbor Drive P.
PART NO. DESCRIP TION REF NO QTY. 50" Mower Deck - Cl ut ch & Support Footnote s 1 1707740 1 V-BELT, Mower Drive 2 1703836 1 V-BELT, Arbor Drive 3 1665835 1 GRIP, Lever 4 1916950 2 NUT, Hex, .
50" Mower Deck - Height Adjustment & Roller Bar NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Insert Must Face Out Mount Hitch Assembly and • Leveling .
PART NO. DESCRIP TION REF NO QTY. 50" Mower Deck - Height Adjustment & Roller Bar Footnote s 1 1719901 1 CRANK, Cutting Height 2 1714084 1 KNOB, Height Crank 3 1960093 1 PAL NUT 4 1924366 8 W.
50" Mower Deck - Height Adjustment & Roller Bar NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Insert Must Face Out Mount Hitch Assembly and • Leveling .
PART NO. DESCRIP TION REF NO QTY. 50" Mower Deck - Height Adjustment & Roller Bar Footnote s 43 1917372 2 NUT, Hex, 5/16-18 44 1917356 2 WASHER, Lock, 5/16 45 1704116 1 BRACKET, Cutting Heigh.
50" Mower Deck - Housin g, Arbors & Blades NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Torque nuts to 50-70 ft. lbs. (67-95 Nm.) Torque s crews to 45-55 ft. lbs. (61-75 Nm) Apply gasket former to this surface if foam gasket is not used.
PART NO. DESCRIP TION REF NO QTY. 50" Mower Deck - Housin g, Arbors & Blades Footnote s 1 1714419 3 NUT, Hex Flange, 9/16-18 2 1713675 6 WASHER, Bellevilled, 9/16 3 1713161 1 PULLEY 4 1713158.
50" Mower Deck - Housin g, Arbors & Blades NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Torque nuts to 50-70 ft. lbs. (67-95 Nm.) Torque s crews to 45-55 ft. lbs. (61-75 Nm) Apply gasket former to this surface if foam gasket is not used.
PART NO. DESCRIP TION REF NO QTY. 50" Mower Deck - Housin g, Arbors & Blades Footnote s 42 1713197 2 HUB, Pulley, Center & RH 43 1724538 1 BAFFLE, Anti-Blowout 44 1927557 2 NUT, Hex, Whizlock, 5 /16-18 45 1931333 2 CARRIAGE BOLT, 5/16-18 x 3/4 The above parts group applies to the following Mfg.
.
T or que Specification Char t FOR ST ANDARD MACHINE HARDWARE (T olerance ± 20%) Hardware Grade SAE Grade 2 SAE Grade 5 SAE Grade 8 Size Of in/lbs in/lbs in/lbs Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm. 8-32 19 2.1 30 3.4 41 4.6 8-36 20 2.3 31 3.5 43 4.
500 N. Spring Street / PO Box 997 Port Washington, WI 53074-0997 USA www.simplicitymfg.c om MANUFACTURING, INC. © Copyright Simplicity Manufacturing, Inc.
デバイスSnapper Broadmoor 2600の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Snapper Broadmoor 2600をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSnapper Broadmoor 2600の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Snapper Broadmoor 2600の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Snapper Broadmoor 2600で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Snapper Broadmoor 2600を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSnapper Broadmoor 2600の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Snapper Broadmoor 2600に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSnapper Broadmoor 2600デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
