SnapperメーカーE281123BVE, E281323BVE, E331523KVEの使用説明書/サービス説明書
ページ先へ移動 of 36
Safety Instructions & Operator’s Manual for EUROPEAN REAR ENGINE RIDING M OWER SERIES 23 MOD EL E281123BVE E281323BVE E331523KVE MODEL NUMBER EXPLA NA TION E 33 15 23 K V E EUROPEA N MODEL ENGINE OP T IONS CUTT ING WIDTH ENGINE T YPE ENGINE HP SERIES DESIGNATION E - European Model 28 - 28” Cutting Deck 33 – 33” cutting Deck 11 - 11.
2 IM PORTA NT SAFETY INSTRUCTIONS WARNING: This pow erful cut ting machine is cap able of amputat ing hands an d feet and can t hrow objects that can cause in jury and damage! Failure to comply wi th the follo wing SAFETY inst ructions coul d result in serious injury or death to the ope rator or other persons.
3 IM PORTA NT SAFETY INSTRUCTIONS PREPA RATION (Continued From Pre vious Page) 7. Keep people and pets out of mowing area. Immediately STOP blades, STOP engine, a nd STOP mach ine if anyone enters t he area. 8. Check shields, deflect ors, switches, b lade controls an d other saf ety devices frequen tly for proper oper ation and location.
4 TA BLE OF CONTENTS IMPO RTANT SA FET Y INST RUCTIONS .........................................................................2-3 TABLE OF CONTENT S ....................................................................................................
5 Section 1 - FA MILIA RIZA TION FIGURE 1.1 1.1 INTRODUCT ION This manual has been prepared for the operator’s of the SNAPPER Rear Engine Rider. Its pur pose, aside fr om recom m ending standard operating pr ocedures and routine servic e requirem ents, is to prom ote SAFETY through the use of ac cepted operating practic es.
6 Section 1 – FA MILIA RIZA TION – DECA LS / SYMBOLS BLA DE ENGA GED POSITIO N “ON” BLA DE DISEN GA GED POSITIO N “OFF” OFF ON STA RT ENGINE ENGINE SPEED CONT ROL SYMBOLS GUA RD W A RNING .
7 Section 1 – FA MILIA RIZA TION – DECA LS / SYMBOLS BA TTERY CAUT ION DECA L - 15691 A UTOM ATIC BLADE STOP DECA L - 24072 CLUTCH/BRA KE DECA L - 2-8514 DEFLE CTOR CAUT ION DECA L 29839 BA TTERY .
8 Section 2 - OPERA TING INSTRUCTIONS 2.1 PRE-START CHECK LIST Make the f ollowing check s and perfor m the s ervice required bef ore each start- up. 2.1.1. Check tires and add or release air as needed to bring press ure to 12 PSI in front and 12 PSI in rear tires.
9 Section 2 - OPERA TING INSTRUCTIONS 2.3 STA RTING & OPERA TION 2.3.1. ENGINE (ELECTRIC START) IMPO RTANT: W hen the ignition key is turned to “START ”, the engine will turn over, but will not start unless the Clutc h/Brake pedal is pressed all the way down, the Blade Lever is in the “Off ” position (See Figure 2.
10 Section 2 - OPERA TING INSTRUCTIONS 2.3 STA RTING & OPERA TION 2.3.1. ENGINE (ELE CTRIC START) (Continued) 8. Should the battery be too weak to start the engine, Refer to Section “ENG INE (MANUAL ST ART) ” to manually start the electr ic start engines .
11 Section 2 - OPERA TING INSTRUCTIONS WA RNING Once blade is dise ngaged, it should come to a complete stop in 3 seconds or less. If the blade continues to rotate afte r 3 seconds, the blade brake must be adjust ed.
12 Section 2 - OPERA TING INSTRUCTIONS WA RNING DO NOT leave machine with engine running. Stop engine. Stop blade. Shift to neutral. Engage pa rking brake. Remove key. 2.4 STOPPING - ENGINE, WHEE L DRIVE, BLA DE 2.4.1. ENGINE 1. Stop engine by tur ning k ey to the “OFF ” position.
13 Section 2 - OPERA TING INSTRUCTIONS 2.4 STOPPING - ENGINE, WHEE L DRIVE, BLA DE 2.4.4. PA RK BRA KE 1. Engage park brak e by pushing clutch/br ake pedal “DOW N” and m oving the park brake latc h to the “ENGAGED” position. W hile holding the park brak e latch “ENGAG ED”, release clutc h/brake pedal to s et park brake.
14 Section 2 - OPERA TING INSTRUCTIONS 2.6 REVERSE LOCKO UT M ECHANISM Data indicates that tragic back -over accidents occur each year. These acc idents usually involve unsupervised c hildren.
15 Section 3 - MA INTENA NCE WA RNING DO NOT attempt any adjustment s, maintenance, service or repairs with the engine r unning. Stop engine. Stop blade. Eng age parking brake. Remov e key. Remove spark plu g wire f rom spark plug and secure aw ay from plug.
16 Section 3 - MA INTENA NCE WA RNING DO NOT attempt an y adjustments, maintenance, service or repairs with the engine running. Stop engine. Sto p blade. Engage p arking brake. Remove key. Remove spark plug w ire from spark p lug and secure away from plug.
17 Section 3 - MA INTENA NCE 3.2.7. INTERLO CK SY STEM Check interlock controls f or proper f unction: The en gine M UST NOT start if : 1. Blade Control is “ON” and/or clutch/brak e pedal is released.
18 Section 3 - MA INTENA NCE 3.3 SERV ICE - EVERY 25 OPER A TING HOURS (Continued from previous page ) 3.3.2. B A T TERY FLUID LEVEL 1. Remove battery. Refer to Section “BAT TERY REMOVAL”. 2. Remove battery caps. Check fluid level. 3. Add water only to bring fluid to pr oper level – approxim ately 3/16” above plates.
19 Section 3 - MA INTENA NCE WA RNING DO NOT attempt an y adjustments, maintenance, service or repairs with the engine running. Stop engine. Sto p blade. Engage p arking brake. Remove key. Remove spark plug w ire from spark p lug and secure away from plug.
20 Section 3 - MA INTENA NCE WA RNING DO NOT attempt an y adjustments, maintenance, service or repairs with the engine running. Stop engine. Sto p blade. Engage p arking brake. Remove key. Remove spark plug w ire from spark p lug and secure away from plug.
21 Section 4 - A DJUSTMENTS & REPA IR WA RNING DO NOT attempt an y adjustments, maintenance, service or repairs with the engine running. Stop engine. Sto p blade. Engage p arking brake. Remove key. Remove spark plug w ire from spark p lug and secure away from plug.
22 Section 4 - A DJUSTMENTS & REPA IR WA RNING DO NOT attempt an y adjustments, maintenance, service or repairs with the engine running. Stop engine. Sto p blade. Engage p arking brake. Remove key. Remove spark plug w ire from spark p lug and secure away from plug.
23 Section 4 - A DJUSTMENTS & REPA IR WA RNING DO NOT attempt an y adjustments, maintenance, service or repairs with the engine running. Stop engine. Sto p blade. Engage p arking brake. Remove key. Remove spark plug w ire from spark p lug and secure away from plug.
24 Section 4 - A DJUSTMENTS & REPA IR WA RNING DO NOT attempt any adjustments, main tenance, service or repairs with the engine r unning. Stop engine. Sto p blade. Engage p arking brake. Remove key. Remove spark plug w ire from sp ark plug and secure away from plug.
25 Section 4 - A DJUSTMENTS & REPA IR WA RNING DO NOT attempt an y adjustments, maintenance, service or repairs with the engine running. Stop engine. Sto p blade. Engage p arking brake. Remove key. Remove spark plug w ire from spark p lug and secure away from plug.
26 Section 4 - A DJUSTMENTS & REPA IR WA RNING DO NOT attempt an y adjustments, maintenance, service or repairs with the engine running. Stop engine. Sto p blade. Engage p arking brake. Remove key. Remove spark plug w ire from spark p lug and secure away from plug.
27 Section 4 - A DJUSTMENTS & REPA IR WA RNING DO NOT attempt an y adjustments, maintenance, service or repairs with the engine running. Stop engine. Sto p blade. Engage p arking brake. Remove key. Remove spark plug w ire from spark p lug and secure away from plug.
28 Section 4 - A DJUSTMENTS & REPA IR WA RNING The elect rolyte (acid) prod uces a highly explosiv e gas. Keep all sparks, flame and fire away from area w hen charging battery or when handling electroly te or battery . Electroly te (acid) is a highly c orrosive liquid.
29 Section 4 - A DJUSTMENTS & REPA IR 4.6.6. BA T TERY T ESTING Battery Condition Chart State of Charge Syr inge Hydr ome ter Digital Voltmeter Five Ball Hydrometer 100% Charged w/ Sulfate Stop 1.280 12.80v Five Balls Floating 100% Charged 1.265 12.
30 TROUBLESHOOTING PROBL EM PROBABLE CA USE CORRECTIVE A CT ION Engine Will Not 1 . F u e l t a nk em p t y. 1. Fill fuel tank with fresh f uel to proper level. Start Using 2. Engine needs chok ing. 2. Move chok e control to “CHOKE” position. Recoil Starter 3.
31 TROUBLESHOOTING PROBLEM PR OBA BLE CA USE CORRECTIVE A CT ION Rider Will Not M ove 1. Drive disc worn or damaged. 1. Replace drive disc . Loss Of T raction 2. Rubber drive disc is not track ing properly on drive disc . 2. Adjust r ubber drive disc.
32 MAINTENA NCE SCHEDULE SUBJECT SERVICE TO BE PERFORMED REFERENCE PA G ES EA CH USE 5 HOURS 25 HOURS 50 HOURS 100 HOURS E A CH SEA SON Engine Check Oil Lev el Page 8 X Engine Initial Oil Change Page .
33 MAINTENA NCE/REPLA CEM ENT PA RTS MAINTENA NCE PA RTS Engine Speed Control ( Briggs Engin e) 2-4155 Engine Speed Control ( Kohler Engin e) 7-4320 Clutch/Brake Cable ( 28” Deck Mo dels) 2-9913 Clu.
34 3 YEA R LIMITED W A RRANTY For thr ee ( 3) years from purc hase date f or the original purc haser's residential, non- com m erc ial use, SNAPPER , through any authorized SNA PPER dealer will r.
35 NOTES ___________________________________________________________________ ___________________________________________________________________ _______________________________________________________.
36 Safety Instructions & Operator’s Manual for EUROPEAN REAR ENGINE RIDING M OWER SERIES 23 IMPORTANT Snapper products are built using engines that meet or exceed all a pplicable emissions requirements on the date manufactured. The labels on thos e engines conta in very impor tant emissions infor mation and critica l safety warnings.
デバイスSnapper E281123BVE, E281323BVE, E331523KVEの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Snapper E281123BVE, E281323BVE, E331523KVEをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSnapper E281123BVE, E281323BVE, E331523KVEの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Snapper E281123BVE, E281323BVE, E331523KVEの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Snapper E281123BVE, E281323BVE, E331523KVEで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Snapper E281123BVE, E281323BVE, E331523KVEを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSnapper E281123BVE, E281323BVE, E331523KVEの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Snapper E281123BVE, E281323BVE, E331523KVEに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSnapper E281123BVE, E281323BVE, E331523KVEデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
