SnapperメーカーEP2167517BV, ERP2167517BVの使用説明書/サービス説明書
ページ先へ移動 of 24
Safety Instructions & Operator’s Manual for EUROPEAN 21” STEEL DECK WALK MOWERS SERIES 17 PROPELLED MODELS EP2167517BV ERP2167517BV MODEL NUM BER EXPLANATION E P 21 675 17 BV MODEL DESIGNATION.
2 IMPORT A NT S AFETY INSTRUCTIO NS WARNING: This powerful cutting machine is capable of amputating hands and feet and can thr ow objects that can cause injury and damage! Failure to comply with the following SAFETY instructions could result in serious injury or death to the operator or other persons.
3 IMPORT A NT S AFETY INSTRUCTIO NS OPERA TION 1. DO NOT put hands or feet near or under rotating parts. Ke ep clear of discharg e area while engine is running. 2. STO P engine w hen crossin g gravel d rives, walks, or roads, and under any conditions where t hrow n object s might be a haz ard.
4 T ABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS.............................................. 2 - 3 TABLE OF CONTENTS ............................................................................ 4 SECTION 1 - FA MILIARIZAT ION .....................
5 Section 1 - FAMILIA RIZ A TION FIGURE 1.1 1.1 INTRODUCT ION This manual has b een pre pared for the operat ors of the SNAPPER W ALK BEHIND MOW ERS. Its purpose, aside f rom recom mending operati ng and routine s ervic e requir ements , is to pr om ote safe ty through the use of ac cepted oper atin g practices .
6 Section 2 - OPERATING INSTRUCTIONS 2.1 PRE-ST ART C HECK L IST Make the f oll owing c h eck s and perf orm the s ervic e requi red be fore each st art-up. 2.1. 1. Check guar ds, def lect ors, grass bag, ad apter and covers to make sure all are in place and secur ely tight ene d.
7 Section 2 - OPERATING INSTRUCTIONS 2.2.2 . PR O PELLI NG M OW ER (Self Prop elled M odels Only) 1. Start engin e. Refer to Sec tion “Start ing & Operation” . 2. Move grou nd speed c ontr ol to the des ired spe ed position. See F igure 2.5. 3.
8 Section 2 - OPERATING INSTRUCTIONS WA RN IN G DO NOT attempt any m aintenance , adjustm ents o r service with engine and blade r unning. STOP engine and blade. Di sconnect s park plug w ire and s ecure away from spark plug. Engine and components are HOT.
9 Section 2 - OPERATING INSTRUCTIONS WA RN IN G DO NOT attempt any m aintenance , adjustm ents o r service with engine and blade r unning. STOP engine and blade. Di sconnect s park plug w ire and s ecure away from spark plug. Engine and components are HOT.
10 Section 3 – MA INTEN ANCE 3.1 INTRODUCT ION To retain the qu alit y of the m ower, use ge nuine SNAPPER r eplac ement pa rts onl y. Contact a local SNAPPER d ealer f or parts and s ervice ass istanc e. For the cor rect part or inf or mation f or a part icular mower, al ways m ention m odel and seria l num ber.
11 Section 3 – MA INTEN ANCE 3.2.2. CHECK GREASE LEVEL IN TRANSMISSION (Con ti nued from pr evi ous p age ) NOTE: Do not spill gr ease or oil on surf ace of drive disc. S ee Figure 3.3. 3. Reinst all trans m ission plug. 4. Check greas e level af ter each 25 hours of operatio n.
12 Section 4 - REPAIR & ADJUSTMENTS WA RN IN G DO NOT attempt any maintenance , adjustments or service with engine and blade r unning. STOP engine and blade. Disconnect spark plug wire a nd secure away from spark plug. Engine and components are HOT.
13 Section 4 - REPAIR & ADJUSTMENTS WA RN IN G DO NOT attempt any maintenance , adjustments or service with engine and blade r unning. STOP engine and blade. Disconnect spark plug wire a nd secure away from spark plug. Engine and components are HOT.
14 Section 4 - REPAIR & ADJUSTMENTS WA RN IN G DO NOT attempt any maintenance , adjustments or service with engine and blade r unning. STOP engine and blade. Disconnect spark plug wire a nd secure away from spark plug. Engine and components are HOT.
15 Section 4 - REPAIR & ADJUSTMENTS WA RN IN G DO NOT attempt any m aintenance , adjustm ents o r service with engine and blade r unning. STOP engine and blade. Di sconnect s park plug w ire and s ecure away from spark plug. Engine and components are HOT.
16 Section 4 - REPAIR & ADJUSTMENTS WA RN IN G DO NOT attempt any m aintenance , adjustm ents o r service with engine and blade r unning. STOP engine and blade. Di sconnect s park plug w ire and s ecure away from spark plug. Engine and components are HOT.
17 Section 4 - REPAIR & ADJUSTMENTS WA RN IN G DO NOT attempt any m aintenance , adjustm ents o r service with engine and blade r unning. STOP engine and blade. Di sconnect s park plug w ire and s ecure away from spark plug. Engine and components are HOT.
18 Section 4 - REPAIR & ADJUSTMENTS WA RN IN G DO NOT attempt any maintenance , adjustments or service with engine and blade r unning. STOP engine and blade. Disconnect spark plug wire a nd secure away from spark plug. Engine and components are HOT.
19 TROUBLESHOOTING PROBL EM PROB ABLE C AUSE CORRECT IVE ACTION Engine Will Not Start 1. Fuel tank empty. 1. Fill fuel t ank w ith fresh fue l. Using Recoil Starter 2. Engine needs cho k ing or pr iming. 2. Choke/Prime. C heck Engine M anual for Instructi ons.
20 SERVICE SCHEDULE ITEM SER VIC E PERF O RM ED REF. EACH USE 5 HRS 25 HRS 50 HRS 100 HRS EACH SEASO N Engine Oil Check Oil Le vel Page 6 X Initia l Oil Ch ange Page 10 X Periodic Oil C hange Page 11 X* Air Pre-Clean e r Clean Spo nge El em ent Engine Ma nual & Page 11.
21 DECAL IDENTIFI CATION (1) WARNING INSTRUCT IONS. (2) WARNING: Do Not operate without entire Grass Ca tc he r or G u ard i n p lac e. (3) PRIME: Use for initial engine starting. Re ad and follow engine operating and maintenance instructions. Push bulb to prime engine.
22 DECAL IDENTIFI CATION (8) OPERA TOR PRESENCE CONT ROL (OPC): Arrow points to the OPC bail. W hen bail is rotate d rearward, t he engine may be start ed and will run as indicated by the e ngine with rotating arr ow. With the engine running, the bla de is rotating as indicated b y the cut gras s symbol.
23 3 YEAR LIMITED WARRAN TY For three (3) years f rom purchas e date f or th e origi nal pur c haser 's r es ide ntial, non -comm ercial us e, SNAPPER , t hrough any authorize d SN A PPER dealer .
24 Safety Instructions & Operator’s Manual for EUROPEAN 21” STEEL DECK WALK BEHIND MOWERS SERIES 17 IMPORT A NT Snapper products are built using engines that meet or exceed all applicable emissions require ments on the date ma nufac tured.
デバイスSnapper EP2167517BV, ERP2167517BVの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Snapper EP2167517BV, ERP2167517BVをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSnapper EP2167517BV, ERP2167517BVの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Snapper EP2167517BV, ERP2167517BVの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Snapper EP2167517BV, ERP2167517BVで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Snapper EP2167517BV, ERP2167517BVを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSnapper EP2167517BV, ERP2167517BVの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Snapper EP2167517BV, ERP2167517BVに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSnapper EP2167517BV, ERP2167517BVデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
