SnapperメーカーLT145H38FBV, LT145H33FBVの使用説明書/サービス説明書
ページ先へ移動 of 44
Safety Instructions & Operator’s Manual for LAWN TRACTOR HYDROSTATIC DRIVE SERIES F MODELS HYDROSTATIC DRIVE LT145H33FBV LT145H38FBV MODEL NUM BER EXPLA NA T ION LT 145 H 38 F B V MODEL DESIGNA .
2 IMPORTA NT SA FETY INSTRUCTIONS WARNING: This powerf ul cuttin g machine is capable of amp utating hand s and feet and can t hrow ob jects that can cause in jury and damage! Failure to comply wi th the follo wing SAFETY inst ructions coul d result in serious injury or death to the ope rator or other persons.
3 IMPORTA NT SA FETY INSTRUCTIONS PREPA RATION (Continued From Pre vious Page) 7. Keep people and pets out of mowing area. Immediately STOP blades, STOP engine, and STOP mach ine if anyone enters the area. 8. Check shields, deflect ors, switches, b lade controls an d other safety dev ices frequently for proper oper ation and location.
4 TABLE OF CONTENTS IMPORTA NT SA FETY INSTRUCT IONS .......... 2 - 3 TA BL E OF CON TENT S ........................................ 4 SEC TION 1 - FA MILIA RIZA T ION ......................... 5 Compone nts ...........................................
5 Section 1 - FA MILIA RIZA TION COMPONENTS The nom enclature drawings above, illus trate the essential com ponents of the SNAPPER Lawn Trac tor. It is recom m ended that all operators of this equipm ent becom e thoroughly fam iliar with the com ponents and their operation BEFO RE OPERATING.
6 Section 2 - OPERA TING INSTRUCTIONS 2.1 PRE-ST A RT CHECKLIST Make the following c hecks and per form service as required bef ore each start-up. 2.1.1. Check tires and add air as needed to bring pressur e to 12 P.S.I. in front tires and 12 P.S.I. in rear tires .
7 Section 2 - OPERA TING INSTRUCTIONS 2.3 STA RTING & OPERA TION 2.3.1. STARTING ENGINE 1. T ake a com fortable position in seat of m achine, look ar ound to mak e sure that the area y ou are going to mow is c lear of people, childr en and pets.
8 Section 2 - OPERA TING INSTRUCTIONS 2.3 ST A RTING & OPERA T ION (continued) 2.3.2. STARTING WHEEL DRIVE 1. Shift speed c ontrol lever to neutral. 2. Start engine. Refer to Sec tion “START ING ENGINE” . 3. Release clutch/br ake pedal. 4. Slowly s hift speed contr ol lever forward for forward m otion or to the rear f or reverse m otion.
9 Section 2 - OPERA TING INSTRUCTIONS 2.4 STO PPING 2.4.3. STOPPIN G MO WER BLADE 1. Stop mower blade by moving blade engagem ent lever to the "OFF " position. See Figure 2.11. FIGURE 2.11 WA RNING Once blade is disengaged, it s hould come to a complete stop in 5 seconds or less.
10 Section 2 - OPERA TING INSTRUCTIONS 2.6. ROLLING TRACTOR WITH ENGINE OFF Rolling Hydro Models 1. W ith engine "OF F", move to rear of tractor. 2. Pull the roll releas e control all the w ay out to disengage the hydro transmis sion. See Figure 2.
11 Section 3 - MA INTENA NCE 3.1 INTRODUCT ION To retain the quality of the T ractor, use genuine SNAPPER replacem ent parts only . Contact a loc al SNAPPER dealer for parts and service ass istance. For the corr ect part or inform ation f or a par ticular Tr actor, alway s mention the m odel and ser ial number .
12 Section 3 - MA INTENA NCE 3.2.3. CHECK MOWER BLA DE (Continued) FIGURE 3.3 3.2.4. CHECK 33" DECK DRIVE BELT 1. W ith engine "OFF", m ove blade engagement lever to "ON". 2. Measure blade cable ex tension spring. Spring should extend 1" +/-1/8" f or proper belt tens ion.
13 Section 3 - MA INTENA NCE 3.3.4. TRACTOR LUBRICA T ION 1. Front W heel Bearings Lubricate each f ront wheel bearing through the grease f itting on w heel hub. Using general purpose grease in a greas e gun, add grease until grease purges f rom bearing.
14 Section 3 - MA INTENA NCE 3.3.4. TRACTOR LUBRICA T ION (Continued From Pre vious Page) 7. Steering T ie Rod Lubricate both ends of steering tie rod with a sm all amount of SAE30 oil. See Figure 3.10. FIGURE 3.10 8. Blade Engagement Mechanism Using SAE30 oil, lubricate the blade engagem ent me chanism pivot points, which are located on the R.
15 Section 3 - MA INTENA NCE 3.4 SERVICE - A NNUA LLY 3.4.2. FUEL FILT ER (Continued From Pre vious Page) 3. Install new f uel filter part num ber 1-4359. See Figure 3.14. FIGURE 3.14 4. Fill f uel tank w ith fres h gasoline. Refer to engine owner's m anual for fuel s pecifications .
16 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT attempt any adjustment s, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remov e key. Remove spark plug w ire from spark plug and secure wire aw ay from spark plug.
17 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP eng ine. Set brake. Remove key. Remove spark plug wire f rom spark plu g and secure w ire away from spark plug.
18 Section 4 - A DJUSTMENT & REPA IR 4.2.4. A DJUST ING M OWER BLA DE – 33” DECK (Continue d from previous page) FIGURE 4.5 WA RNING DO NOT attempt any adjustment s, maintenance or service with the engine or blade running. STOP blade. STOP engine.
19 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT attempt any adjustment s, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remov e key. Remove spark plug w ire from spark plug and secure wire aw ay from spark plug.
20 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT attempt any adjustment s, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remov e key. Remove spark plug w ire from spark plug and secure wire aw ay from spark plug.
21 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT attempt any adjustment s, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remov e key. Remove spark plug w ire from spark plug and secure wire aw ay from spark plug.
22 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT attempt any adjustment s, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remov e key. Remove spark plug w ire from spark plug and secure wire aw ay from spark plug.
23 Section 4 - A DJUSTMENT & REPA IR 4.3.4. T RA CTION DRIVE BELT A DJUSTM ENT Should a gradual loss of traction be noticed, it m ay be necessar y to adj ust the traction drive belt tension. Adjust as follows: 1. Move tr actor to a firm , level surfac e.
24 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT attempt any adjustment s, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remov e key. Remove spark plug w ire from spark plug and secure wire aw ay from spark plug.
25 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT attempt any adjustment s, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remov e key. Remove spark plug w ire from spark plug and secure wire aw ay from spark plug.
26 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT attempt any adjustment s, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remov e key. Remove spark plug w ire from spark plug and secure wire aw ay from spark plug.
27 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT attempt any adjustment s, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remov e key. Remove spark plug w ire from spark plug and secure wire aw ay from spark plug.
28 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT attempt any adjustment s, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remov e key. Remove spark plug w ire from spark plug and secure wire aw ay from spark plug.
29 Section 4 - A DJUSTMENT & REPA IR 4.5 BA T TERY 4.5.1. BA T TERY REM OVA L 1. Raise operator's seat. 2. Remove the two adjus ting knobs. 3. Remo ve seat assem bly and m ove forward. Use care not to disc onnect wires from seat switch. See Figure 4.
30 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT OVERFILL! DO NO T attempt to service or charge the b att ery wh ile it is installed on the machine. DO NOT use “BOOST ” chargers on th e battery. 4.5.5. BA T TERY T ESTING There are two types of battery tests: Unloaded and Loaded.
31 Section 4 - A DJUSTMENT & REPA IR A VA ILA BLE A CCESSORIES The SNAPPER Series F LAW N T RACTOR c an be equipped with a variety of ac cessories that increase its vers atility . T he acces sories available for each model ar e listed in the c hart below.
32 SECTION 5 - ELECTRICA L SYSTEM Harness Routin g Figure 5.1 illustr ates ty pic al harness routing on all the Ser ies D Lawn Tractors . Use this when locating various elec trical com ponents.
33 SECTION 5 - ELECTRICA L SYSTEM SCHEMATICS The s chematic s below, Figure 5.2 & Figure 5.3 represent m odels with and without headlights. BRIGGS & STRA T TON WIT HOUT LIGHTS FIGURE 5.
34 TROUBLESHOOTING GUIDE PROBLEM PROBA BLE CAUSE CORRECTIVE A CTION Starter Will Not 1. Battery dead. 1. Service battery. Crank Engine 2. Blown fuse. 2. Replace fus e. 3. Electrical c onnections loose or c orroded. 3. Clean and check connections f or good contact.
35 TROUBLESHOOTING GUIDE (Continued From Previous Page) PROBLEM PROBA BLE CAUSE CORRECTIVE A CTION Tractor Will Not Move Or L oss Of Traction 1. Speed control handle in the neutral “ N” position. 1. Place speed contr ol in desired speed. 2. Roll release contr ol in “ROLL” position.
36 MA INTENA NCE SCHEDULE SUBJECT SERVICE TO BE PERFORM ED REFERENCE PAGES EACH USE 5 HOURS 25 HOURS 50 HOURS 100 HOURS EACH SEASON Engine Check Oil Lev el Page 6 X Engine Initial Oil Change Page 11 X.
37 3 YEA R LIMITED WA RRA NTY For three (3) y ear s from purchase date f or the original purchas er's residential, non-c omm ercial use, SNAPPER , through any authorized SNA PPER dealer will repl.
38 PRIMARY MA INTENA NCE.
39 PRIMARY MA INTENA NCE.
40 PRIMARY MA INTENA NCE.
41 PRIMARY MA INTENA NCE.
42 SERVICE NOTES ___________________________________________________________________ ___________________________________________________________________ _______________________________________________.
43 SERVICE NOTES ___________________________________________________________________ ___________________________________________________________________ _______________________________________________.
44 Safety Instructions & Operator’s Manual for LAWN TRACTOR HYDROSTATIC DRIVE SERIES F IMPORTANT Snapper products are built us ing engines that meet or exceed all applicable emissions requirements on the date manufactured. The labels on those engines contain very important emissi ons information and cr itical safety warnings.
デバイスSnapper LT145H38FBV, LT145H33FBVの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Snapper LT145H38FBV, LT145H33FBVをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSnapper LT145H38FBV, LT145H33FBVの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Snapper LT145H38FBV, LT145H33FBVの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Snapper LT145H38FBV, LT145H33FBVで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Snapper LT145H38FBV, LT145H33FBVを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSnapper LT145H38FBV, LT145H33FBVの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Snapper LT145H38FBV, LT145H33FBVに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSnapper LT145H38FBV, LT145H33FBVデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
