SnapperメーカーLT160H42GBV, LT160H42GBV2, WLT180H48GBV2, WLT160H42GBV, WLT180H48GBV2の使用説明書/サービス説明書
ページ先へ移動 of 44
Safety Instructions & Operator’s Manual for LAWN TRACTOR HYDROSTATIC DRIVE ELECTRIC CLUTCH SERIES G MODELS LT160H42GBV LT160H42GBV2 LT180H48GBV2 WLT160H42GBV WLT180H48GBV2 MODEL NUM BER EXPLA NA.
2 IM PORTA NT SA FETY INSTRUCTIONS WARNING: This powerf ul cuttin g machine is capable of amp utating hand s and feet and can t hrow ob jects that can cause in jury and damage! Failure to comply wi th the follo wing SAFETY inst ructions coul d result in serious injury or death to the ope rator or other persons.
3 IM PORTA NT SA FETY INSTRUCTIONS PREPA RATION (Continued From Pre vious Page) 7. Keep people and pets out of mowing area. Immediately STOP blades, STOP engine, and STOP mach ine if anyone enters the area. 8. Check shields, deflect ors, switches, b lade controls an d other safety dev ices frequently for proper oper ation and location.
4 TABLE OF CONTENTS IMPORTA NT SA FETY INSTRUCT IONS .......... 2 - 3 TA BL E OF CON TENT S ........................................ 4 SEC TION 1 - FA MILIA RIZA TION ......................... 5 Compone nts ............................................
5 Section 1 - FA MILIA RIZA TION FIGURE 1.1 COMPONENTS The nom enclature drawings above, illus trate the essential com ponents of the SNAPPER Lawn Trac tor. It is recom m ended that all operators of this equipm ent becom e thoroughly fam iliar with the com ponents and their operation BEFO RE OPERATING.
6 Section 2 - OPERA TING INSTRUCTIONS 2.1 PRE-ST A RT CHECKLIST Make the following c hecks and per form service as required bef ore each start-up. 2.1.1. Check tires and add air as needed to bring pressur e to 12 P.S.I. in front tires and 12 P.S.I. in rear tires .
7 Section 2 - OPERA TING INSTRUCTIONS 2.3 STA RT ING & OPERA TION 2.3.1. STARTING ENGINE 1. T ake a com fortable position in seat of m achine, look ar ound to mak e sure that the area y ou are going to mow is c lear of people, childr en and pets.
8 Section 2 - OPERA TING INSTRUCTIONS 2.3 ST A RTING & OPERA T ION (Continued) 2.3.2. STARTING WHEEL DRIVE 1. Shift speed contr ol lever to neutral. 2. Start engine. Refer to Sec tion “STARTING ENGINE” . 3. Release clutch/brak e pedal. 4. Slowly sh ift speed contr ol lever forward for forward m otion or to the rear f or reverse m otion.
9 Section 2 - OPERA TING INSTRUCTIONS 2.4 STO PPING 2.4.3. STO PPING MO WER BLADES 1. Stop m ower blade by p u s h i n g b l ades s witch IN to disengage blades. S ee F i g u r e 2 . 1 1 . FIGURE 2.11 WA RNING Once blades are disengaged, the y should come to a complete stop in 5 seconds or less.
10 Section 2 - OPERA TING INSTRUCTIONS 2.6. ROLLING TRACTOR WITH ENGINE OFF 2.6.1. Rolling Hydro Models 1. W ith engine "OFF ", move to rear of tractor. 2. Pull the roll release c ontrol all the way out to disengage the hydro transmis sion. See Figure 2.
11 Section 2 - OPERA TING INSTRUCTIONS 2.7. REVERSE LOCKOUT MECHA NISM Data indicates that tragic back-over accidents occ ur each year. Thes e accidents us ually involve unsupervised children.
12 Section 3 – MA INTENA NCE 3.1 INTRODUCT ION To retain the quality of the Tr actor, use genuine SNAPPER replacem ent parts only. Contact a local SNAPPER dealer f or parts and servic e assistance. For the correc t part or inform ation for a particular Trac tor, alwa ys m e ntio n the model and ser ial number.
13 Section 3 - MA INTENA NCE 3.2.4. CHECK DECK DRIVE BELT 1. The idler and s pring provide proper belt tension and require no adjustm ent. If belt is frayed, slit, severed or belt strands ex posed, replace belt bef ore operating mow er . 3.3 SEVICE - EVERY 25 O PERA T ING HOUR S 3.
14 Section 3 - MA INTENA NCE 3.3.4. TRACTOR LUBRICA T ION (Continued From Pre vious Page) 3. Clutch/Brake Pivot The c lutch/brake pivot is located on the L.H. underside of the tr actor and is lubricated with one shot of gener al purpose grease. See Figure 3.
15 Section 3 - MA INTENA NCE 3.4 A NNUALLY (END OF EA CH SEA SON) Perfor m all m aintenance as desc ribed in Section “SERVICE - EVERY 25 OPERAT ING HOU RS”. Also see Service Sc hedule. 3.4.1. ENGINE 1. Service engine acc ording to engine owner's manual.
16 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT attempt any adjustment s, maintenance or service with the engine or blades running. S TOP blades. ST OP engine. Set brake. Remove key. Remove spark p lug wire fro m spark plug and secure wire away from spa rk plug.
17 Section 4 – A DJUSTMENT & REPA IR WA RNING DO NOT attempt any adjustment s, maintenance or service with the engine or blades running. S TOP blades. ST OP engine. Set brake. Remove key. Remove spark p lug wire fro m spark plug and secure wire away from spa rk plug.
18 Section 4 - A DJUSTMENT & REPA IR 4.2.5. M OWER DECK A DJU STM ENT (L EVELNESS) SIDE-T o-SIDE (48” Decks) Before m ak ing deck leveling adjus tments, chec k the tire pres sure. Chec k tir es and add or releas e air as needed to br ing pressure to 12 PSI in f ront and 12 PSI in r ear tires.
19 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT attempt any adjustment s, maintenance or service with the engine or blades running. S TOP blades. ST OP engine. Set brake. Remove key. Remove spark p lug wire fro m spark plug and secure wire away from spa rk plug.
20 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT attempt any adjustment s, maintenance or service with the engine or blades running. S TOP blades. ST OP engine. Set brake. Remove key. Remove spark p lug wire fro m spark plug and secure wire away from spa rk plug.
21 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT attempt any adjustment s, maintenance or service with the engine or blades running. S TOP blades. ST OP engine. Set brake. Remove key. Remove spark p lug wire fro m spark plug and secure wire away from spa rk plug.
22 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT attempt any adjustment s, maintenance or service with the engine or blades running. S TOP blades. ST OP engine. Set brake. Remove key. Remove spark p lug wire fro m spark plug and secure wire away from spa rk plug.
23 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT attempt any adjustment s, maintenance or service with the engine or blades running. S TOP blades. ST OP engine. Set brake. Remove key. Remove spark p lug wire fro m spark plug and secure wire away from spa rk plug.
24 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT attempt any adjustment s, maintenance or service with the engine or blades running. S TOP blades. ST OP engine. Set brake. Remove key. Remove spark p lug wire fro m spark plug and secure wire away from spa rk plug.
25 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT attempt any adjustment s, maintenance or service with the engine or blades running. S TOP blades. ST OP engine. Set brake. Remove key. Remove spark p lug wire fro m spark plug and secure wire away from spa rk plug.
26 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT attempt any adjustment s, maintenance or service with the engine or blades running. S TOP blades. ST OP engine. Set brake. Remove key. Remove spark p lug wire fro m spark plug and secure wire away from spa rk plug.
27 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT attempt any adjustment s, maintenance or service with the engine or blades running. S TOP blades. ST OP engine. Set brake. Remove key. Remove spark p lug wire fro m spark plug and secure wire away from spa rk plug.
28 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT attempt any adjustment s, maintenance or service with the engine or blades running. S TOP blades. ST OP engine. Set brake. Remove key. Remove spark p lug wire fro m spark plug and secure wire away from spa rk plug.
29 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT attempt any adjustment s, maintenance or service with the engine or blades running. S TOP blades. ST OP engine. Set brake. Remove key. Remove spark p lug wire fro m spark plug and secure wire away from spa rk plug.
30 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT attempt any adjustment s, maintenance or service with the engine or blades running. S TOP blades. ST OP engine. Set brake. Remove key. Remove spark p lug wire fro m spark plug and secure wire away from spa rk plug.
31 Section 4 - A DJUSTMENT & REPA IR WA RNING DO NOT OVERFILL! Never attempt to serv ice or charge the b att ery wh ile it is installed on the machine. DO NOT use “BOOST ” chargers on th e battery. 4.5.5. BA T TERY T ESTING There are two types of battery tests: Unloaded and Loaded.
32 Section 4 - A DJUSTMENT & REPA IR 4 . 6 M OWER SPINDLES (Field Serv iceable Spindles) BEA RING REPLACEMENT – 48” Deck Only In the event that a spindle bearing requir es replacem ent, the SNAPPER Field Serviceable Spindles have been designed s o that no special tools or pres ses are required.
33 Section 4 - A DJUSTMENT & REPA IR A VA ILA BLE A CCESSORIES The SNAPPER LA W N TRACTOR can be equ ipped w ith a variety of accesso ries that increase its versatility. T he accessories av ailable for each model are listed in t he chart below . Contact an au thorized SNAPPER dealer for ordering an y of th e accessories desired.
34 SECTION 5 - ELECTRICA L SYSTEM.
35 TROUBLESHOOTING GUIDE PROBLEM P ROBA BLE CAUS E CORRECTIVE A CT ION Starter Will Not 1. Battery dead. 1. Service battery. Crank Engine 2. Blown fuse. 2. Replace fus e. 3. Electrical c onnections loose or c orroded. 3. Clean and check connections f or good contact.
36 TROUBLESHOOTING GUIDE (Continued From Pre vious Page) PROBLEM PROBA BLE CA USE CORRECTIVE A CT ION Tractor Will Not 1. Speed control handle in the neutral “ N” position. 1. P l a c e s peed control in desir ed speed. Move Or L oss Of 2. Ro l l re l ea s e c on t ro l i n “ RO L L” po s it io n .
37 MA INTENA NCE SCHEDULE SUBJECT SERVICE TO BE PERFORM ED REFERENCE PAGES EACH USE 5 HOURS 25 HOURS 50 HOURS 100 HOURS EACH SEASON Engine Check Oil Lev el Page 6 X Engine Initial Oil Change Page 12 X.
38 3 YEA R LIM ITED WARRA NTY For three (3) y ear s from purchase date f or the original purchas er's residential, non-c omm ercial use, SNAPPER , through any authorized SNA PPER dealer will repl.
39 PRIMARY MA INTENA NCE.
40 PRIMARY MA INTENA NCE.
41 PRIMARY MA INTENA NCE.
42 PRIMARY MA INTENA NCE.
43 SERVICE NOTES ___________________________________________________________________ ___________________________________________________________________ _______________________________________________.
44 Safety Instructions & Operator’s Manual for LAWN TRACTOR HYDROSTATIC DRIVE ELECTRIC CLUTCH SERIES G IMPORTANT Snapper products are built us ing engines that meet or exceed all applicable emissions requirements on the date manufactured. The labels on those engines contain very important emissions information and critic al safety warnings.
デバイスSnapper LT160H42GBV, LT160H42GBV2, WLT180H48GBV2, WLT160H42GBV, WLT180H48GBV2の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Snapper LT160H42GBV, LT160H42GBV2, WLT180H48GBV2, WLT160H42GBV, WLT180H48GBV2をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSnapper LT160H42GBV, LT160H42GBV2, WLT180H48GBV2, WLT160H42GBV, WLT180H48GBV2の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Snapper LT160H42GBV, LT160H42GBV2, WLT180H48GBV2, WLT160H42GBV, WLT180H48GBV2の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Snapper LT160H42GBV, LT160H42GBV2, WLT180H48GBV2, WLT160H42GBV, WLT180H48GBV2で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Snapper LT160H42GBV, LT160H42GBV2, WLT180H48GBV2, WLT160H42GBV, WLT180H48GBV2を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSnapper LT160H42GBV, LT160H42GBV2, WLT180H48GBV2, WLT160H42GBV, WLT180H48GBV2の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Snapper LT160H42GBV, LT160H42GBV2, WLT180H48GBV2, WLT160H42GBV, WLT180H48GBV2に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSnapper LT160H42GBV, LT160H42GBV2, WLT180H48GBV2, WLT160H42GBV, WLT180H48GBV2デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
