SnapperメーカーM301021BE, M250821BE, M280921B, M281021BE, M300921Bの使用説明書/サービス説明書
ページ先へ移動 of 36
Safety Instructions & Operator’s Manual for REAR ENGINE RIDING M OWER SERIES 21 MOD EL M250821BE M280921B M281021BE M300921B M301021BE MODEL NUMBER EXPLA NA TION M 28 10 21 B E MIDDLE M A RKET E.
2 IM PORTA NT SAFETY INSTRUCTIONS WARNING: This pow erful cut ting machine is cap able of amputat ing hands an d feet and can t hrow objects that can cause in jury and damage! Failure to comply wi th the follo wing SAFETY inst ructions coul d result in serious injury or death to the ope rator or other persons.
3 IM PORTA NT SAFETY INSTRUCTIONS PREPA RATION (Continued From Pre vious Page) 7. Keep people and pets out of mowing area. Immediately STOP blades, STOP engine, a nd STOP mach ine if anyone enters t he area. 8. Check shields, deflect ors, switches, b lade controls an d other saf ety devices frequen tly for proper oper ation and location.
4 TA BLE OF CONTENTS IMPO RTANT SA FET Y INST RUCTIONS .................... 2-3 TABLE OF CONTENT S ..................................................4 SECTION 1 - FA M ILIA RIZA T ION ...................................5 SECTION 2 - O PERA T ING INSTRUCT IONS .
5 Section 1 – FA MILIA RIZA TION+ FIGURE 1.1 1.1 INTRODUCT ION This manual has been prepared for the operator’s of the SNAPPER Rear Engine Rider. Its pur pose, aside fr om recom m ending standard operating pr ocedures and routine servic e requirem ents, is to prom ote SAFETY through the use of ac cepted operating practic es.
6 Section 2 - OPERA TING INSTRUCTIONS 2.1 PRE-ST A RT C HECK LIST Make the f ollowing check s and perfor m the s ervice required bef ore each start- up. 2.1.1. Check tires and add or release air as needed to bring pressur e to 12 psi in f ront and 12 psi in rear tires.
7 Section 2 - OPERA TING INSTRUCTIONS 2.3 STARTING & OPERA TION 2.3.1. ENGINE (ELECTRIC START) IMPO RTANT: W hen the ignition key is turned to “START ”, the engine will turn over, but will not start unless the Clutc h/Brake pedal is pressed all the way down, the Blade Lever is in the “Off ” position (See Figure 2.
8 Section 2 - OPERA TING INSTRUCTIONS 2.3 STARTING & OPERA TION 2.3.1. ENGINE (ELE CTRIC START) (Continued) 8. Should the battery be too weak to start the engine, Refer to Section “ENG INE (MANUAL ST ART) ” to manually start the electr ic start engines .
9 Section 2 - OPERA TING INSTRUCTIONS WA RNING Once blade is dise ngaged, it should come to a complete stop in 3 seconds or less. If the blade continues to rotate afte r 3 seconds, the blade brake must be adjust ed.
10 Section 2 - OPERA TING INSTRUCTIONS WA RNING DO NOT leave machine with the engine running. Stop engine. Stop blade . Shift to neutral. Engage parking brake. Remov e key. 2.4 STOPPING - ENGINE, W HEEL DRIVE, BLADE 2.4.1. ENGINE 1. Stop engine by turning key to the “OFF” position.
11 Section 2 - OPERA TING INSTRUCTIONS 2.4 STOPPING - ENGINE, WHEE L DRIVE, BLA DE 2.4.4. PA RK BRA KE 1. Engage park brak e by pushing clutch/br ake pedal “DOW N” and m oving the park brake latc h to the “ENGAGED” position. W hile holding the park brak e latch “ENGAG ED”, release clutc h/brake pedal to s et park brake.
12 Section 2 - OPERA TING INSTRUCTIONS 2.6 REVERSE LOCKO UT M ECHANISM Data indicates that tragic back -over accidents occur each year. These acc idents usually involve unsupervised c hildren.
13 Section 3 - MA INTENA NCE WA RNING DO NOT attempt an y adjustments, maintenance, service or repairs with the engine running. STOP engine. ST OP blade. Engag e parking brake. Remov e key. Remove spark plug w ire from spark p lug and secure away from plug.
14 Section 3 - MA INTENA NCE WA RNING DO NOT attempt any adjustment s, maintenance, service or repairs with the engine running. STOP engine. S T OP blade. Engage parking b rake. Remove key. Remove spark plug wire f rom spark plug and secure aw ay from plug.
15 Section 3 - MA INTENA NCE 3.2.9. LUBRICA T ION – GREA SE FITT INGS The f ollowing components on the Rear Engine Rider are equipped with grease fittings and require periodic lubric ation. Apply G eneral Purpose greas e (NLGI No.2) with a grease gun.
16 Section 3 - MA INTENA NCE 3.3 SERV ICE - EVERY 25 OPER A TING HOURS 3.3.8. REAR A XLE BEA RING 1. T he left rear ax le bearing requires thr ee shots of general purpos e grease f rom gr ease gun. See Figure 3.7. NOTE: Som e m odels are equipped with a pre- lubricated sealed bear ing and require no additional lubrication.
17 Section 3 - MA INTENA NCE 3.4 SERV ICE - A NNUALLY 3.4.1. Perfor m all m aintenance as s pecified in “MAINTENANCE SCHEDULE” Section of this manual.
18 Section 4 - A DJUSTMENTS & REPA IR WA RNING DO NOT attempt an y adjustments, maintenance, service or repairs with the engine running. Stop engine. Sto p blade. Engage p arking brake. Remove key. Remove spark plug w ire from spark p lug and secure away from plug.
19 Section 4 - A DJUSTMENTS & REPA IR WA RNING Once blade is dis engaged it should come to a stop in 3 seconds or less. If the blade continues to rotate after 3 seconds the blade brake must be adjusted. DO NOT contin ue t o op erate t he machin e if t he b lade brake is not o perating prop erly.
20 Section 4 - A DJUSTMENTS & REPA IR WA RNING DO NOT attempt an y adjustments, maintenance, service or repairs with the engine running. Stop engine. Sto p blade. Engage p arking brake. Remove key. Remove spark plug w ire from spark p lug and secure away from plug.
21 Section 4 - A DJUSTMENTS & REPA IR WA RNING DO NOT attempt any adjustments, main tenance, service or repairs with the engine r unning. Stop engine. Sto p blade. Engage p arking brake. Remove key. Remove spark plug w ire from sp ark plug and secure away from plug.
22 Section 4 - A DJUSTMENTS & REPA IR WA RNING DO NOT attempt an y adjustments, maintenance, service or repairs with the engine running. STOP engine. ST OP blade. Engag e parking brake. Remov e key. Remove spark plug w ire from spark p lug and secure away from plug.
23 Section 4 - A DJUSTMENTS & REPA IR WA RNING DO NOT attempt an y adjustments, maintenance, service or repairs with the engine running. STOP engine. ST OP blade. Engag e parking brake. Remov e key. Remove spark plug w ire from spark p lug and secure away from plug.
24 Section 4 - A DJUSTMENTS & REPA IR WA RNING DO NOT attempt an y adjustments, maintenance, service or repairs with the engine running. Stop engine. Sto p blade. Engage p arking brake. Remove key. Remove spark plug w ire from spark p lug and secure away from plug.
25 Section 4 - A DJUSTMENTS & REPA IR WA RNING The elect rolyte (acid) prod uces a highly explosiv e gas. Keep all sparks, flame and fire away from area w hen charging battery or when handling electroly te or battery . Electroly te (acid) is a highly c orrosive liquid.
26 Section 4 - A DJUSTMENTS & REPA IR 4.6.6. BA T TERY T ESTING Battery Condition Chart State of Charge Syr inge Hydr ome ter Digital Voltmeter Five Ball Hydr ometer 100% Charged w/ Sulfate Stop 1.280 12.80v Five Balls Floating 100% Charged 1.265 12.
27 TROUBLESHOOTING PROBL EM PROBABLE CA USE CORRECTIVE A CT ION Engine Will Not 1 . F u e l t a nk em p t y. 1. Fill fuel tank with fresh f uel to proper level. Start Using 2. Engine needs chok ing. 2. Move chok e control to “CHOKE” position. Recoil Starter 3.
28 TROUBLESHOOTING PROBLEM PROBA BLE CA USE CORRECTIVE A CT ION Rider Will Not M ove 1. Drive disc worn or damaged. 1. Replace drive disc . Loss Of T raction 2. Rubber drive disc is not track ing properly on drive disc . 2. Adjust r ubber drive disc. 3.
29 MAINTENA NCE SCHEDULE SUBJECT SERVICE TO BE PERFORMED REFERENCE PA G ES EA CH USE 5 HOURS 25 HOURS 50 HOURS 100 HOURS E A CH SEA SON Engine Check Oil Lev el Page 6 X Engine Initial Oil Change Page .
30 MAINTENA NCE/REPLA CEM ENT PA RTS MAINTENA NCE PA RTS Engine Speed Control ( Briggs Engin e) 2-4155 Clutch/Brake Cable 2-9913 Brake Cable 2-2344 Reverse Locko ut M echanism 7-3216 25” Cutter Blad.
31 3 YEA R LIMITED W A RRANTY For thr ee ( 3) years from purc hase date f or the original purc haser's residential, non- com m erc ial use, SNAPPER , through any authorized SNA PPER dealer will r.
32 PRIMARY MA INTENA NCE.
33 PRIMARY MA INTENA NCE.
34 PRIMARY MA INTENA NCE.
35 PRIMARY MA INTENA NCE.
36 Safety Instructions & Operator’s Manual for REAR ENGINE RIDING MOWER SERIES 21 IMPORTANT Snapper products are built using engines that meet or exceed all a pplicable emissions requirements on the date manufactured. The labels on thos e engines conta in very impor tant emissions infor mation and critica l safety warnings.
デバイスSnapper M301021BE, M250821BE, M280921B, M281021BE, M300921Bの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Snapper M301021BE, M250821BE, M280921B, M281021BE, M300921Bをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSnapper M301021BE, M250821BE, M280921B, M281021BE, M300921Bの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Snapper M301021BE, M250821BE, M280921B, M281021BE, M300921Bの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Snapper M301021BE, M250821BE, M280921B, M281021BE, M300921Bで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Snapper M301021BE, M250821BE, M280921B, M281021BE, M300921Bを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSnapper M301021BE, M250821BE, M280921B, M281021BE, M300921Bの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Snapper M301021BE, M250821BE, M280921B, M281021BE, M300921Bに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSnapper M301021BE, M250821BE, M280921B, M281021BE, M300921Bデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
