SnapperメーカーSPEL150KHの使用説明書/サービス説明書
ページ先へ移動 of 34
Safety Instructions and Operator’s M anual for PRO GEAR EXPRESS WALK BEHIND MOWERS MID-SIZE SERIES 0 POWER UNIT MODEL SPEL150KH MOWER UNIT MODEL SPE361 SPE481 MODEL NUMBER EXPLA NA TION S P EL 15 0 .
IMPORTA N T SA FETY INSTRUCTIONS WARNING: This powerf ul cuttin g machine is capable of amp utating hand s and feet and can t hrow ob jects that can cause in jury and damage! Failure to comply wi th the follo wing SAFETY inst ructions coul d result in serious injury or death to the ope rator or other persons.
3 IMPORTA NT SA FETY INSTRUCTIONS PREPA RATION (Continued From Pre vious Page) 11. Protect yourself when mo wing and wear appropriate clot hing including safety glasses, long pants, ear protection, hardha t and substa ntial footwear with good traction.
4 IMPORTA NT SA FETY INSTRUCTIONS MA INTENANCE (Continued From Pre vious Page) 7. Disconnect batte ry be fore per forming maintenance or service. Cr anking engine could cause injury. Disconnect n egative (black) cable from battery first a nd positive (red) l ast.
5 TA BLE OF CONTENTS IMPO RTA NT SAFETY INST RUCTIONS ...................................................................................2-4 TABLE OF CONTENT S ...........................................................................................
6 SECTION 1 - FA MILIA RIZA TION FIGURE 1.1 1.1 INTRODUCT ION This manual has been prepar ed for the operator’s of the SNAPPER PRO GEAR W ALK BEHIND MOW ER. Its purpose, aside f rom recom mending standar d operating procedures and routine service r equirements , is to prom ote SAFETY thr ough the use of ac cepted operating practic es.
7 SECTION 2 - SA FETY MESSA GES A ND SYMBOLS FORW A RD SPEEDS 5 TH - FA STEST 1 ST - SLOWEST NEUTRA L REVERSE BLA DE SWITCH BLA DES ENGA GED – “ON” BLA DES DISENG A GED – “OFF” REA D OPERA.
8 SECTION 2 - SA FETY MESSA GES A ND SYMBOLS IMPORTA NT SAFETY A ND OPERA TING INSRUCTIONS.
9 SECTION 2 – SA FETY MESSA GES A ND SYMBOLS DA NGER! ROTA TING BLADE S . KEEP HA NDS A ND FEET AWA Y. KEEP CHILDREN A ND OTHERS OUT OF T HE MOWING A REA DA NGER! ROTA T ING BLA DES.
10 SECTION 2 - CONTROLS FIGURE 2.1 WA RNING To av oid sudden and unexpected turning, both T raction Lever s must be moved the same way when starting or stopping machine motion.
11 SECTION 3 - OPERA TING INSTRUCTIONS 3.1 BEFORE OPERA TING Be Thoroughly fam iliar with all controls and how to use them bef ore operating the m achine. Know beforehand how to STOP the T raction W heel Drives, Mower Blades and Engine in preparation f or possible em ergencies.
12 SECTION 3 - OPERA TING INSTRUCTIONS 3.4 STA RTING & OPERA TING - (Continued from previous page ) FIGURE 3.2 FIGURE 3.3 FIGURE 3.4 IMPO RTA NT : DO NOT jer k the engine recoil star ter handle or allow it to snap back . NOTE : Engine w ill not st art unless the transm ission is in NEUTRAL pos ition and Blade Clutch Switch is in OFF position.
13 SECTION 3 - OPERA TING INSTRUCTIONS 3.4 STA RTING & OPERA TING - (Continued from previous page ) FIGURE 3.5 WA RNING Start mowing with a slow ground spee d and gradually increase speed to determine the mo st comfortable t ravel speed.
14 SECTION 3 - OPERA TING INSTRUCTIONS WA RNING DO NOT operate blades in rev erse. Stop blades. LOOK and SEE behind and down for childr en, pets and haz ards before and w hile backing. Engine speed mu st be set to SLOW b efore operating in reverse. 3.
15 BRA KE P OSITION LEFT HA ND BRA KING, W I TH RI GHT HAND RELEASED TURNS UNIT TO THE LEF T DRIVE POSIT ION TRACTION LEVER POSIT ION SECTION 3 - OPERA TING INSTRUCTIONS WA RNING Brakes require main tenance. Inspect f or proper operation before oper ating machine.
16 SECTION 3 - OPERA TING INSTRUCTIONS 3.9 CUTTING HEIGHT A DJUSTMENT (Fixed Decks) Mower has three m ethods of adjus ting cutting height: 1. Moving position of BLADE on cutter spindle s haft. 2. Moving position of CASTER W HEEL on support. 3. Moving position of MOW ER DECK on power unit.
17 SECTION 3 - OPERA TING INSTRUCTIONS 3 . 1 1 A DJUSTING BLA DE ON CUTTER SPINDLE (Continued) FIGURE 3.13 3 . 1 2 A DJUSTING FIXED DECK A TTA CHMENT The m ower deck has f our diff er ent positions for attaching it to the power unit.
18 SECTION 4 - TROUBLESHOOTING ENGINE TR OUBLESHOOTING S YMP TOM P ROB LEM S OL UTI ON Engine ................... Key OFF. ............................................................................................... Turn Key to Run. does not ......
19 SECTION 4 - TROUBLESHOOTING MOWER TROUBLESHOOTI NG (Continued) S YMP TOM P ROB LEM S OL UTI ON Mower not ...................................... Broken or slippi ng Blade Belt. ...................................... Repl ace Belt. Check idler and spring.
20 SECTION 5 - A DJUSTMENTS 5.1 STEERING/BRA KES If machine is not as responsive as desired when either Trac tion Lever is squeezed, one or both brak es should be adjusted as f ollows: 1. Oper ate mower on level terrain with Transm ission Shift Lever in No.
21 SECTION 5 - A DJUSTMENTS 5.3 HA NDLE HEIGHT The operator handle can be adjusted for operator com fort as f ollows: 1. Loosen the upper c arriage bolt and nut on both lef t and right lower handles. See Figure 5.3. 2. Rem ove lower carriage bolt and nut from both left and right handles.
22 SECTION 6 - POWER UNIT SERVICE 6.1 REPLA CEMENT PARTS To retain the quality of your mower, use G enuine SNAPPER Replacem ent Parts only! Contact your local SNAPPER dealer for parts and service ass istance. For the correc t part or inform ation for y our mower, alway s mention Model and Ser ial Number of Power Unit and Mower Attachm ent.
23 SECTION 7 - MOWER A TTA CHMENT SERVICE 7.1 TRA NSMISSION BELT REMOVA L/REPLA CEMENT Should it becom e nec es sar y to replace the transm ission drive belt, contact an authorized SNAPPER Dealer f or servi ce. WA RNING DO NOT attempt any maintenance, adjustmen ts or service with the engine r unning.
24 SECTION 7 - MOWER A TTA CHMENT SERVICE 7.4 CUTTING BLA DE SERVICE Check blades after each us e for signs of excess ive wear and damage. See F igure 7.4 for blade wear lim its. FIGURE 7.4 1. Use the f ollowing chart for order ing replacem ent Blades for the 36” & 48” Mowing Decks.
25 SECTION 7 - MOWER A TTA CHMENT SERVICE 7.5 MO WER SPINDLES (Field Serviceable Spindles) BEA RING REPLACEMENT In the event that a spindle bearing requires replacem ent, the SNAPPER Field Serviceable Spindles have been designed s o that no special tools or pres ses are required.
26 SECTION 8 - ELECTRICA L FIGURE 8.1.
27 2 YEA R LIMITED WA RRA NTY For two (2) y ears from purchase date f or the original purchaser 's use, SNA PPER , through any authorized SNA PPER dealer will replace, fr ee of charge (ex cept fo.
28 PRIMA RY MA INTENA NCE.
29 PRIMA RY MA INTENA NCE.
30 PRIMA RY MA INTENA NCE.
31 PRIMA RY MA INTENA NCE.
32 NOTES.
33 NOTES.
34 Safety Instructions and Operator’s M anual for PRO GEAR EXPRESS MID-SIZE WALK BEHIND MOWERS SERIES 0 IMPORTANT Snapper products are built using engines that meet or exceed all a pplicable emissions requirements on the date manufactured. The labels on thos e engines contai n very importa nt emissions informa tion and critical safety warnings.
デバイスSnapper SPEL150KHの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Snapper SPEL150KHをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSnapper SPEL150KHの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Snapper SPEL150KHの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Snapper SPEL150KHで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Snapper SPEL150KHを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSnapper SPEL150KHの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Snapper SPEL150KHに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSnapper SPEL150KHデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
