Soehnleメーカー2761の使用説明書/サービス説明書
ページ先へ移動 of 19
2761 Getting Started and Operating Instructions 470.620.022 Printed in Germany 2/1998 Subject to technical modifications.
_ Getting started 1 Set up the weighing platform at the place requir ed Use the water level and the adjustable feet to ensure that the scale is positioned horizontally .
On - Off Switch on (only when the scales are not loaded) After the test routine, the main display is set to zero. The scales are r eady for use. Switching between the scales Higher resolution (hold do.
An acoustic signal confirms that the entry is correct Incorrect entries ar e indicated by means of five acoustic signals in swift sucession. Please check that your entry is correct. If necessary , cancel the command sequence by pressing the ”CI” key .
_ Display symbols main display secondary display 4 Zero message Standstill indication Active range in the case of multi-range scales. Percentage display Empty message Set points activated Gross weighi.
If the tare weight is unknown Determine the tare of the empty container Scales are r eady to perform net weighing If necessary , clear the tare after unloading the scale If the tare weight is known Place the filled container on the scale. Enter the tare weight in kg using the numeric keyboard.
_ T otalling weights 6 T ar e the container if necessary . Place the items to be weighed on the scale. T ransfer the weight value to the totals memory . T ake the items take weighed of f the scale. Clear the tare if necessary If necessary , enter a new tare.
_ Weighing using the r emoval method _ *see component weighing 7 Place the filled container on the scale. If the tare is known , enter it manually if necessary and tare the weight. If it is important to determine the weight of the remainder: T ransfer the weight value to the totals memory .
_ Components weighing 8 T ar e the container if necessary Place the items to be weighed on the scale. T ransfer the weight value to the component weighing memory . The K-mode is indicated by an arrow . Place the next items to be weighed on the scale. T ransfer the weight value to the commission memory , etc.
_ Switching and checking in the weighing mode 9 Set points (limit values) can only be set in weighing and counting mode. 3 memories for limit values are available for each connected scale: Entry must be additive, i.e. the weight of first limit value should be added to the second.
_ Switching and checking in the counting mode 10 Loading memory Enter number of pieces for set point with the numeric keyboard. Press the ”Ld” command key , followed by the number of the memory . Confirm your entry by pressing the function key . Memories 2 and 3 are enter ed and displayed in the same way .
_ Counting 11 Switch the scale to counting mode. Determining the refer ence weight T ar e the empty container if necessary . Place the number of items requested by the scale or enter the refer ence nu.
_ T otalling quantities Determine the number of pieces. T ransfer this to the totals memory (in the secondary display) Remove the items from the scale. Clear the tare if necessary . Determine a new tare if necessary . Place the next quantity on the scale.
_ Removal method 13 Unknown number of pieces and item weight Determine the number of pieces(without tare) T o determine the r emaining number of pieces: transfer the number of pieces to the totals memory . Set the display to zero by pr essing the ”T” funktion key .
_ Printing Key functions Single print Print - add to totals memory Print totals and clear memory Print - add to component weighing memory Print totals and clear memory Entering organisational data A 40- digit number can be assigned to each memory of the three organisational data memories.
Activating user modification Press the ”i” key and ”On/Of f” at the same time. User modification functions Calibration step selection, forwards Calibration step selection, backwards Moving the.
Always column 00 Positioning on the right side 00XX B XX Gross weight 15 G XXXXX,XX <Unit> 01XX D XX Date 8 XX.XX.XX 02XX d XX Date 1x 8 for pressing tke key just once 03XX E XX Orga-data 1 No. 1 XXX... max. 39 pos. 04XX e XX Titel Org. 1 blank 05XX F XX Orga-data 2 No.
Indicator An acoustic signal confirms that entry was correct Incorrect entries ar e indicated by 5 acoustic signals in swift succession. The scale sets the value zero automatically when it is switched on. If the scales are outside the set tolerance range, -0- is displayed.
18 _ T echnical information • The housing is made from pr essure-moulded, powder -coated aluminium (RAL 9006) • Dimensions 258 x 193 x 73 mm • Protection type IP 65, dust pr oof and splash-proof • Operated by means of a tactile keypad with acoustic acknowledgement • Mains operation with power supply unit, 230 V 50-60Hz, approx.
デバイスSoehnle 2761の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Soehnle 2761をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSoehnle 2761の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Soehnle 2761の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Soehnle 2761で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Soehnle 2761を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSoehnle 2761の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Soehnle 2761に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSoehnle 2761デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。