SonyメーカーBKM-FW50の使用説明書/サービス説明書
ページ先へ移動 of 35
2006 Sony Corporation Operating Instructions BKM-FW50 Streaming Receiver Adaptor 2-891-424- 02 (1).
2 Using the BKM-FW50 Streaming Receiver Adaptor ■ When not connected to a network Playback still image or video files from a memory card Preparations Take pictures with a digital camera Copy still i.
3 Ta b le of Contents Precautions ............................................... 4 About This Manual ................................... 4 Names and Functions of Parts and Controls ................................................. 5 Installation ....
4 Precautions / About This Manual Precautions • The software specifications of this unit are subject to change for improvements without notice. • Screens shown by application software may differ slightly from the illustrations shown in this manual.
5 Names and Functions of P arts and Controls Names and Functions of Parts and Controls 4 1 1 USB port The port will be used for expanded functions to be introduced in future. 2 Memory card slot cover fastening screw 3 Network connector (10BASE-T/ 100BASE-TX) Serves to connect the unit to a network, using a 10BASE-T/100BASE-TX LAN cable.
6 Installation Before installation • Turn off power to the display and all other equipment connected to the display. For the display, proceed as follows: press 1 to put the display into standby mode and then disconnect the power cord from the AC outlet.
7 Pla ybac k of Still Images or Video Fr om a CF Car d The BKM-FW50 is equipped with a memory card slot that accepts CompactFlash cards (not supplied). If you insert a CF card that contains images shot with a digital still camera into the slot of the BKM-FW50, the images can be viewed on the display in a slide show format.
8 3 Replace the memory card slot cover and tighten the fastening screw with a Phillips screwdriver. Using slide show playback When a CF card which contains still images taken with a digital still came.
9 Preparations f or Using the Netw ork Functions The BKM-FW50 can be connected to a network with 10BASE-T/100BASE-TX LAN cable. When connected to a LAN, the IP addresses of the BKM-FW50 can be set using one of the following two methods. Consult your network administrator regarding details about IP address selection.
10 2 Enter the IP address that was assigned to the display control function into the address field, in the format “http://xxx.xxx.xxx.xxx”. Then press the Enter key on the keyboard. When a user name and password have been set, the “Network Password” screen appears.
11 Computer Operation Controlling the display You can make various display settings on the screen of the computer. Make sure that the BKM-FW50 is properly installed in the display, and that the BKM- FW50, computer, and router or hub are properly connected with network cable.
12 For details on error information, see “List of Error Codes” (page 30). Clear (Delete) Lets you delete error information displayed in the Player Error History. Note Up to 30 errors appear in the Player Error History in the order that they occurred.
13 Brightness +/– buttons Adjust the screen brightness. Chroma +/– buttons Adjust the color intensity. Phase +/– buttons Adjust the color balance. Reset button Resets the settings from “Contrast” to “Phase” to their factory default values.
14 Streaming Play This screen lets you make settings for display and playback of still image and video files stored on a Web/HTTP server. A maximum of 1,000 files can be downloaded with Store Local. Each file can be no larger than 2 GB in size. Note A maximum of 1,000 files are playable with Streaming Play.
15 Play file/folder name Specifies the location of the still image or video files on the Web/HTTP server specified in the “Server Address” field. You can either enter the location in the text box or click the “Browse” button and select the file or folder location on the screen that appears.
16 Local Play This screen lets you make settings for display and playback of still image and video files stored on a CF card inserted in the memory card slot of the BKM-FW50. Note A maximum of 1,000 files are playable with Local Play. Each file can be no larger than 2 GB in size.
17 Note To enable use of the PC Presentation function, UltraVNC must be installed on the computer. UltraVNC is free software licensed under GNU GPL. Connect PC Select this to enable the PC Presentation function of the BKM-FW50. The following items also need to be set.
18 When you select this check box, priority is given to data downloads with the Scheduled Download function. If the specified time for Auto Play falls during a download, automatic playback for that day is canceled. When this check box is not selected, Auto Play will begin after data finishes downloading.
19 Make selections based on the aspect ratios of the images you wish to view. When viewing still image files, we recommend making the aspect ratios of each file the same. Notes • When playing files with mixed aspect ratios, black bars may appear on either side of the display, or the image may be stretched lengthwise.
20 High Resolution Mode: 16:9 (WXGA) High resolution mode: 4:3 (XGA) Computer Operation Input still image Display Display: Full mode The input still image is displayed in the original aspect ratio. Display Display Display: Full mode The input still image is displayed in the original aspect ratio.
21 Video Resolution Select Auto, NTSC (480i), NTSC (480p), or PAL (576p) as the playback resolution for video. Guide Message Specify whether to display a message that enables you to tell the display is turned on when no still images or videos are playing.
22 Edit Play List This screen lets you edit play lists and create new play lists. Note To edit play lists, a CF card must be inserted in the memory card slot on the unit. Edit Play List This feature can be used to change the content of previously created play lists.
23 Create New Play List This feature can be used to create a new play list. Enter a name for the play list in the text box, and then use the following buttons to create the play list.
24 • To specify still image or video files from the CF card inserted in the memory card slot on the unit, click the “File Browse” button without entering anything in the text box, and specify a file or folder on the screen that appears.
25 Note You can specify a time anywhere in the range of 0:00 to 35:59 (11:59 a.m. the next day) for both the data playback start time and the time table end time. As a result, data set to play back in a time slot on the next day may be superseded by a time table scheduled to start playback that day.
26 Network Internet Protocol (TCP/IP) Select “Specify an IP address” to enter each value in the IP address’s numeric string. Select “Obtain an IP address (DHCP)” to acquire an IP address automatically from the DHCP server. In this case, be aware that the IP address will change each time the display attached to the BKM-FW50 is turned on.
27 ID Talk Lets you make settings for the ID Talk function. ID Talk is a protocol that allows network-based control of the display in which the BKM-FW50 is installed. Controlled items includes various settings and adjustments such as color temperature and gamma.
28 Tr oub leshooting Before requesting service, please check the following points. If the problem persists, contact your local Sony dealer. Problem Cause/Remedy Cannot connect to network. Storage medium is not recognized. Cannot playback files saved on the storage medium.
29 Problem Cause/Remedy Cannot save files from a server to local storage. Streaming playback is unavailable. The display control screen (the Web screen displaying the unit’s GUI) does not display. •A storage medium is not inserted in the BKM- FW50.
30 List of Error Codes When an error occurs while using the BKM-FW50, an error code along with error information is displayed on the Information screen (page 11). The following explains the meanings of error codes and the methods of dealing with them.
31 Error code When it occurs What it means How to deal with it (Hex) 0x31 0x32 0x33 0x34 0x35 0x40 0x50 0x51 0x52 0x53 The specified file is of an extension not supported by the BKM-FW50.
32 Error code When it occurs What it means How to deal with it (Hex) Store Local PC Presentation Troubleshooting 0x54 0x55 0x56 0x57 0x58 0x59 0x5A 0x70 0x71 A network error has occurred. The storage capacity on the CF card is insufficient. The file/folder specified to be deleted does not exist.
33 Other Scheduling playback by time table When you create a time table and perform scheduled playback of still image or video files, some files may not be played back, depending on the content of the schedule. When creating a time table, you can specify any time slot from 0:00 (midnight of the current day) to 35:59 (11:59 a.
34 Specifications Specifications Input/output Network 10BASE-T/100BASE- TX (connection speeds may differ, depending on the network environment) Memory card slot CF Type II USB Type A General Dimensions (including projecting parts) 135 × 32 × 95 mm (5 3 / 8 × 1 5 / 16 × 3 3 / 4 inches) (W/H/D) Mass Approx.
Sony Corporation.
デバイスSony BKM-FW50の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Sony BKM-FW50をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSony BKM-FW50の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sony BKM-FW50の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sony BKM-FW50で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sony BKM-FW50を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSony BKM-FW50の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sony BKM-FW50に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSony BKM-FW50デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
