SonyメーカーCCD-TRV107の使用説明書/サービス説明書
ページ先へ移動 of 100
©2002 Sony Corporation Model No. CCD-TRV Model No. AC- Serial No. Serial No. Operating Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference. Owner’s Record The model and serial numbers are located on the bottom.
2 Welcome! Congratulations on your purchase of this Sony Handycam Vision TM . With your Handycam Vision TM , you can capture life’s precious moments with superior picture and sound quality. Your Handycam Vision TM is loaded with advanced features, but at the same time it is very easy to use.
3 For the customers in the U.S.A. If you have any questions about this product, you may call: Sony Customer Information Center 1-800-222-SONY (7669). The number below is for the FCC related matters only. Regulatory Information Declaration of Conformity Trade Name: SONY Model No.
4 Main Featur es Taking moving images, and playing them back • Recording a picture (p. 19) • Playing back a tape (p. 29) Capturing images on your computer * 1) • Viewing images recorded on a tape (p. 59) • Viewing images live from your camcorder (p.
5 T able of contents Main Features .......................................... 4 Quick Start Guide ............................. 6 Getting started Using this manual ................................... 8 Checking supplied accessories ............ 10 Step 1 Preparing the power supply .
Quick Start Guide 6 Quick Start Guide This chapter introduces you to the basic features of your camcorder. See the page in parentheses “( )” for more information. Open the DC IN jack cover. Connect the plug with its v mark facing up. Inserting a cassette (p.
Quick Start Guide 7 Monitoring the playback picture on the LCD screen (p. 29) 2 Press m to rewind the tape. 3 Press N to start playback. Note Do not pick up your camcorder by the viewfinder, the LCD panel, or the battery pack. 3 Open the LCD panel while pressing OPEN.
8 — Getting started — Using this manual The instructions in this manual are for the five models listed in the table below. Before you start reading this manual and operating your camcorder, check the model number by looking at the bottom of your camcorder.
Getting started 9 Using this manual Note on TV color systems TV color systems differ from country to country. To view your recordings on a TV, you need an NTSC system-based TV.
10 Checking supplied accessories Make sure that the following accessories are supplied with your camcorder. 1 Wireless Remote Commander (CCD- TRV107/TRV408 only) (1) (p. 96) 2 AC-L10A/L10B/L10C AC power adaptor (1), Power cord (1) (p. 15) 3 NP-FM30 battery pack (1) (p.
11 Getting started Installing the battery pack Slide the battery pack down until it clicks. To remove the battery pack Slide the battery pack out in the direction of the arrow while pressing V BATT down.
12 Step 1 Preparing the power supply Charging the battery pack Use the battery pack after charging it for your camcorder. Your camcorder operates only with the “ InfoLITHIUM ” battery pack (M series). See page 81 for details of the “ InfoLITHIUM ” battery pack.
13 Getting started Step 1 Preparing the power supply Note Prevent metallic objects from coming into contact with the metal parts of the DC plug of the AC power adaptor. This may cause a short-circuit, damaging the AC power adaptor. Remaining battery time indicator The remaining battery time you record with the viewfinder is displayed.
14 CCD-TRV608 Recording with Recording with Battery pack the viewfinder the LCD screen Continuous * Typical ** Continuous * Typical ** NP-FM30 (supplied) 165 90 100 55 NP-FM50 265 145 160 90 NP-FM70 5.
15 Getting started Connecting to a wall outlet When you use your camcorder for a long time, we recommend that you power it from a wall outlet using the AC power adaptor. ( 1 ) Open the DC IN jack cover, and connect the AC power adaptor to the DC IN jack on your camcorder with the plug ’ s v mark facing up.
16 Step 2 Setting the date and time Set the date and time settings when you use your camcorder for the first time. “CLOCK SET” will be displayed each time when you set the power switch to CAMERA unless you set the date and time settings.
17 Getting started To check the preset date and time Press DATE to display the date indicator. Press TIME to display the time indicator. Press DATE (or TIME) and then press TIME (or DATE) to simultaneously display the date and time indicator. Press DATE and/or TIME again.
18 When you want to record in the Hi8 system, use Hi8 video cassettes. ( 1 ) Prepare the power supply (p. 11). ( 2 ) Open the lid of the cassette compartment, and press Z EJECT. The cassette compartment opens automatically. ( 3 ) Insert a cassette into the cassette compartment with its window facing out and the write-protect tab on the cassette up.
19 Recording – Basics 5 3 1 2 40min REC 0:00:01 4 C A M E R A P L A Y E R O F F ( C H G ) POWER C A M E R A P L A Y E R O F F ( C H G ) POWER — Recording – Basics — Recor ding a picture Your camcorder automatically focuses for you. ( 1 ) Remove the lens cap by pressing both knobs on its sides and attach the lens cap to the grip strap.
20 To enable smooth transition You can make the transition between the last scene you recorded and the next scene smooth as long as you do not eject the cassette even if you turn off your camcorder. When you change the battery pack, set the POWER switch to OFF (CHG).
21 Recording – Basics Recording a picture During recording in the mirror mode DATE and TIME on your camcorder do not work. Indicators in the mirror mode • The STBY indicator appears as Xz and REC as z . Some of other indicators appear mirror-reversed and others are not displayed.
22 Using the zoom feature Move the power zoom lever a little for a slower zoom. Move it further for a faster zoom. Using the zoom function sparingly results in better-looking recordings.
23 Recording – Basics To record pictures with the viewfinder – Adjusting the viewfinder If you record pictures with the LCD panel closed, check the picture with the viewfinder. Adjust the viewfinder lens to your eyesight so that the indicators in the viewfinder come into sharp focus.
24 SP 0:00:01 40 min REC Indicators displayed in the recording mode The indicators are not recorded on tape. Remaining battery time indicator The remaining battery time indicator indicates the approximate recording time. The indicator may not be correct, depending on the conditions in which you are recording.
25 Recording – Basics Recording a picture Shooting backlit subjects – BACK LIGHT When you shoot a subject with the light source behind the subject or a subject with a light background, use the backlight function. Press BACK LIGHT in CAMERA mode. The .
26 Recording a picture Shooting in the dark – NightShot The NightShot function enables you to shoot a subject in a dark place. For example, you can satisfactorily record the environment of nocturnal animals for observation when you use this function.
27 Recording – Basics Recording a picture Superimposing the date and time on pictures You can record the date and/or time displayed on the screen superimposed on the picture. Carry out the following operations in CAMERA mode. Press DATE to record the date.
28 You can use this button to record a picture from the last recorded scene successively. You can go to the end of the recorded section after you record. Press END SEARCH in CAMERA mode. The last 5 seconds of the recorded section are played back and returns to the standby mode.
29 Playback – Basics — Playback – Basics — Playing back a tape You can monitor the playback picture on the LCD screen. If you close the LCD panel, you can monitor the playback picture in the viewfinder. ( 1 ) Install the power source and insert the recorded tape.
30 When monitoring on the LCD screen You can turn the LCD panel over and move it back to the camcorder body with the LCD screen facing out [a] . You can adjust the angle of the LCD panel by lifting the LCD panel up by 7 degrees [b] .
31 Playback – Basics Various playback modes To operate video control buttons, set the POWER switch to PLAYER. To view a still image (playback pause) Press X during playback. To resume playback, press X or N . To advance the tape Press M in the stop mode.
32 If your TV is already connected to a VCR Connect your camcorder to the LINE IN input on the VCR by using the A/V connecting cable supplied with your camcorder. Set the input selector on the VCR to LINE. To connect to a TV without Video/Audio input jacks Use an NTSC system RFU adaptor (optional).
33 Advanced Recording Operations You can record a cinema-like picture (CINEMA) or a 16:9 wide picture to watch on the 16:9 wide-screen TV (16:9FULL). Refer to the operating instructions of your TV. CINEMA Black bands appear on the screen during recording in the CINEMA mode [a] , playing back on a normal TV [b] or a wide-screen TV [c] .
34 In CAMERA mode, set 16:9WIDE to CINEMA or 16:9FULL in in the menu settings (p. 68). To cancel the wide mode Set 16:9WIDE to OFF in the menu settings. If the wide mode is set to 16:9FULL (CCD-TRV308/TRV408/TRV608 only) The SteadyShot function does not work.
35 Advanced Recording Operations You can fade in or out to give your recording a professional appearance. Using the fader function MONOTONE When fading in, the picture gradually changes from black-and-white to color. When fading out, the picture gradually changes from color to black-and-white.
36 ( 1 ) When fading in [ a ] In the standby mode, press FADER until the desired fader indicator flashes. When fading out [ b ] In the recording mode, press FADER until the desired fader indicator flashes. The indicator changes as follows: The last selected fader mode is indicated first of all.
37 Advanced Recording Operations You can digitally process images to obtain special effects like those in films or on the TV. PASTEL [ a ] : The contrast of the picture is emphasized, and the picture looks like an animated cartoon. NEG.ART [ b ] : The color and brightness of the picture are reversed.
38 Using the PROGRAM AE function You can select the PROGRAM AE (Auto Exposure) mode to suit your specific shooting requirements. SPOTLIGHT (Spotlight) This mode prevents people ’ s faces, for example, from appearing excessively white when shooting subjects lit by strong light in the theater.
39 Advanced Recording Operations ( 1 ) In CAMERA mode, select PROGRAM AE in in the menu settings (p. 68). ( 2 ) Select the desired PROGRAM AE mode in the menu settings, then press the SEL/PUSH EXEC dial. To cancel the PROGRAM AE function Set PROGRAM AE to AUTO in the menu settings.
40 You can manually adjust and set the exposure. Adjust the exposure manually in the following cases: – The subject is backlit – Bright subject and dark background – To record dark pictures (e.g. night scenes) faithfully ( 1 ) In CAMERA mode, press EXPOSURE.
41 Advanced Recording Operations You can gain better results by manually adjusting the focus in the following cases: • The autofocus mode is not effective when shooting: – subjects through glass coated with water droplets. – horizontal stripes. – subjects with little contrast with backgrounds such as walls and sky.
42 Superimposing a title You can select one of eight preset titles and two custom titles (p. 44). You can also select the language, color, size, and position of titles. ( 1 ) In CAMERA mode, press TITLE to display the title menu. ( 2 ) Turn the SEL/PUSH EXEC dial to select , and then press the dial.
43 Advanced Recording Operations To superimpose the title while you are recording Press TITLE while you are recording, and carry out steps 2 to 5. When you press the SEL/PUSH EXEC dial at step 5, the title is superimposed. To select the language of a preset title If you want to change the language, select before step 2.
44 Making your own titles You can make up to two titles and store them in your camcorder. Each title can have up to 20 characters. ( 1 ) In CAMERA or PLAYER mode, press TITLE.
45 Advanced Recording Operations To change a title you have stored In step 3, select CUSTOM1 SET or CUSTOM2 SET, depending on which title you want to change, then press the SEL/PUSH EXEC dial. Turn the SEL/PUSH EXEC dial to select [ C ], then press the dial to delete the title.
46 – CCD-TRV107/TRV308/TRV408/TRV608 only You can use the built-in light to suit your shooting situation. The recommended distance between the subject and camcorder is about 1.5 m (5 feet). Press LIGHT repeatedly, until the indicator appears on the screen while your camcorder is in CAMERA mode.
47 Advanced Recording Operations Notes • The built-in light turns off automatically in the following cases: – When it stays on in the AUTO mode ( ) for more than 5 minutes. – When you leave it on for more than 5 minutes with no cassette inserted or after the tape has run out.
48 CAUTION • When replacing the bulb, use only the Sony XB-3D halogen lamp (optional) to reduce the risk of fire. • To prevent possible burn hazard, disconnect the power source before replacing and do not touch the bulb until the bulb becomes cool enough to handle (for about 30 minutes or more).
49 Editing Using the A/V connecting cable Connect your camcorder to the VCR using the A/V connecting cable supplied with your camcorder. You can record and edit a picture with the connected VCR by using your camcorder as a player. Set DISPLAY to LCD in in the menu settings (The default setting is set to LCD.
50 When you have finished dubbing a tape Press x on both your camcorder and the VCR. To prevent deterioration of pictures when dubbing Set EDIT to ON in the menu settings before dubbing.
51 Editing Dubbing a tape easily – Easy Dubbing VCR operation for dubbing can be controlled easily by using your camcorder when the VCR is connected. You can select one of eight preset titles and two custom titles stored in your camcorder as instructed in “ Making your own titles ” (p.
52 Dubbing a tape easily – Easy Dubbing Step 2: Setting the VCR to operate with your camcorder You can control the VCR by wireless remote control. (1) Setting the modes to cancel recording pause on the VCR 1 Set the POWER switch to PLAYER on your camcorder.
53 Editing (2) Setting the IR SETUP code 1 Turn the SEL/PUSH EXEC dial to select IR SETUP, then press the dial. 2 Turn the SEL/PUSH EXEC dial to select the IR SETUP code of your VCR, then press the dial. Check the code in “ About the IR SETUP code ” (p.
54 * TV/VCR component Note on IR SETUP code The Easy Dubbing is not possible if the VCR does not support IR SETUP codes. Brand IR SETUP code Sony 1, 2, 3, 4, 5, 6 Admiral (M. Wards) 89 Aiwa 80, 47, 54 Akai 49, 51 Audio Dynamic 21, 35 Bell&Howell (M.
55 Editing (4) Confirming the VCR operation 1 Insert a recordable tape into the VCR, then set to recording pause. 2 Turn the SEL/PUSH EXEC dial to select IR TEST, then press the dial. 3 Turn the SEL/PUSH EXEC dial to select EXECUTE, then press the dial.
56 Step 3: Selecting the title You can select title, color, size, and background color. CUSTOM1 and CUSTOM2 are custom titles stored in your camcorder as instructed in “ Making your own titles ” (p. 44). HELLO! (1) Press EASY DUBBING to display the menu.
57 Editing EASY DUBBING START TITLE SEL MODE SEL SETUP 0 0 : 0 0 : 0 EASY DUBBING START TITLE SEL MODE SEL SETUP 0 0 : 0 0 : 0 NORMAL NORMAL NORMAL NORMAL PREVIEW 1 [ EASY DU B ]: EN D [ EASY DU B ]: EN D Step 4: Selecting the dubbing mode You can choose either normal recording (NORMAL) or interval recording (PREVIEW).
58 Step 5: Performing Easy Dubbing Make sure that your camcorder and VCR are connected, and that the VCR is set to recording pause. When you use a video camera recorder, set its POWER switch to VTR/VCR. Set the POWER switch of your camcorder to PLAYER.
59 PC Connection — PC Connection — V iewing images using your computer – USB Str eaming (Windows users only) – CCD-TRV608 only If you connect your camcorder and computer by the supplied USB cable, you can view images live from your camcorder and images recorded on a tape on your computer.
60 Viewing images using your computer – USB Streaming (Windows users only) Notes • Operations are not guaranteed if you connect 2 or more pieces of USB equipment to a single computer at the same time or when using a hub. • Depending on the type of USB equipment used simultaneously, some equipment may not operate.
61 PC Connection To the USB connector USB cable (supplied) To the (USB) jack Computer ( 4 ) Follow the on-screen messages to install the USB driver. ( 5 ) Connect the AC power adaptor to your camcorder and then to a wall outlet. ( 6 ) Set the POWER switch to CAMERA or PLAYER.
62 3 Connect the AC power adaptor, and set the POWER switch to CAMERA or PLAYER. 4 Open your computer ’ s “ Device Manager. ” Windows XP: Select “ Start ” t “ Control Panel ” t “ System ” t “ Hardware ” tab, and click the “ Device Manager ” button.
63 PC Connection 6 Set the POWER switch to OFF (CHG), and then disconnect the USB cable. 7 Reboot your computer. Step 2 Install the USB driver Perform the entire procedure listed in “ Installing the USB driver ” on the page 60. Installing “ PIXELA ImageMixer Ver.
64 ( 8 ) Select . ( 9 ) Start playing back a tape on your camcorder. The images recorded on a tape appears in the preview window. Viewing images using your computer – USB Streaming (Windows users on.
65 PC Connection Viewing images live from your camcorder ( 1 ) Follow the procedure ( 1 ) - ( 2 ) on page 64, and then connect the AC power adaptor to your camcorder and then to a wall outlet. ( 2 ) Set the POWER switch to CAMERA. ( 3 ) Follow the procedure ( 5 ) - ( 8 ) on page 64.
66 Notes • When you view images using your computer with the USB connection, the following conditions may occur, but do not indicate malfunction: – The image may fluctuate. – The image may contain noise, etc. – The image does not appear properly if the image signal is of a different TV color system from your camcorder.
67 Customizing Your Camcorder — Customizing Your Camcorder — Changing the menu settings To change the mode settings in the menu settings, select the menu items with the SEL/ PUSH EXEC dial. The default settings can be partially changed. First, select the icon, then the menu item and then the mode.
68 Icon/item PROGRAM AE P EFFECT D ZOOM 16:9WIDE STEADYSHOT * N.S.LIGHT Menu items are displayed as the following icons: MANUAL SET CAMERA SET PLAYER SET LCD/VF SET TAPE SET SETUP MENU OTHERS Depending on your camcorder model The menu display may be different from that in this illustration.
69 Customizing Your Camcorder Icon/item EDIT TBC TBC stands for “ Time Base Corrector. ” DNR DNR stands for “ Digital Noise Reduction. ” In more than 5 minutes after removing the power source The “ EDIT ” item is returned to their default settings.
70 Notes on the LP mode • When you record a tape in the LP mode on your camcorder, we recommend playing back the tape on your camcorder. When you play back the tape on other camcorders or VCRs, noise may occur in images or sound.
71 Customizing Your Camcorder Icon/item CLOCK SET AUTO DATE USB STREAM LTR SIZE LANGUAGE DEMO MODE POWER switch CAMERA CAMERA PLAYER CAMERA PLAYER CAMERA PLAYER CAMERA CAMERA Changing the menu settings Mode —— z ON OFF z OFF ON z NORMAL 2 × z ENGLISH FRAN Ç AIS ESPA Ñ OL PORTUGU Ê S z ON OFF Meaning To set the date or time.
72 In more than 5 minutes after removing the power source The “ COMMANDER ” * item is returned to the default setting. The other menu items are held in memory even when the battery is removed. Recording a close-up picture When REC LAMP is set to ON, the red recording lamp on the front of the camcorder may reflect on the subject if it is close.
73 Troubleshooting A vertical band appears when you shoot a very bright subject. If you run into any problem using your camcorder, use the following table to troubleshoot the problem. If the problem persists, disconnect the power source and contact your Sony dealer or local authorized Sony service facility.
74 Symptom Cause and/or Corrective Actions • If 10 minutes elapse after you set the POWER switch to CAMERA or DEMO MODE is set to ON in the menu settings without a cassette inserted, your camcorder automatically starts the demonstration. c Insert a cassette and the demonstration stops.
75 Troubleshooting Symptom Cause and/or Corrective Actions • The tape was ejected after recording. • You have not recorded on the cassette yet. • The operating temperature is too low. • The battery pack is not fully charged. c Charge the battery pack fully again.
76 Symptom Cause and/or Corrective Actions • Your camcorder was connected to your computer with the USB cable before installing the USB driver, so the driver was not recognized by the computer. c Uninstall the unrecognized driver, and then reinstall the driver.
77 Troubleshooting Five-digit display Cause and/or Corrective Actions • You are using a battery pack that is not an “ InfoLITHIUM ” battery pack. c Use an “ InfoLITHIUM ” battery pack. (p. 81) • Moisture condensation has occurred. c Remove the cassette and leave your camcorder for at least 1 hour to acclimate.
78 W ar ning indicators and messages If indicators and messages appear on the screen or in the display window, check the following: See the page in parentheses “ () ” for more information.
79 Troubleshooting Warning messages • CLOCK SET Set the date and time. (p. 16) • FOR “ InfoLITHIUM ” Use an “ InfoLITHIUM ” battery pack. (p. 81) BATTERY ONLY • Q NO TAPE* 1) Insert a cassette tape. • Q TAPE END* 1) The tape has reached the end.
80 — Additional Information — About video cassettes Selecting the cassette type You can use both Hi8 and standard 8 mm video cassettes on your camcorder.
81 Additional Information About the “ InfoLITHIUM ” battery pack What is the “ InfoLITHIUM ” battery pack? The “ InfoLITHIUM ” battery pack is a lithium-ion battery pack that has functions for communicating information related to operating conditions between your camcorder and the AC adaptor/charger (optional).
82 About “ InfoLITHIUM ” battery pack Battery life • The battery life is limited. Battery capacity drops little by little as you use it more and more, and as time passes. When the available battery time is shortened considerably, a probable cause is that the battery pack has reached the end of its life.
83 Additional Information Using your camcorder abroad You can use your camcorder in any country or area with the AC power adaptor supplied with your camcorder within 100 V to 240 V AC, 50/60 Hz. When charging the battery pack, use a commercially available AC plug adaptor [ a ] , if necessary, depending on the design of the wall outlet [ b ] .
84 Maintenance information and pr ecautions Moisture condensation If your camcorder is brought directly from a cold place to a warm place, moisture may condense inside your camcorder, on the surface of the tape, or on the lens. In this condition, the tape may stick to the head drum and be damaged or your camcorder may not operate correctly.
85 Additional Information Maintenance information Cleaning the LCD screen If fingerprints or dust make the LCD screen dirty, we recommend using a LCD Cleaning Kit (optional) to clean the LCD screen. Cleaning the video head To ensure normal recording and clear pictures, clean the video heads.
86 Charging the built-in rechargeable battery in your camcorder A built-in rechargeable battery is supplied with your camcorder so as to retain the date and time, etc., regardless of the setting of the POWER switch. The rechargeable battery is always charged as long as you are using your camcorder.
87 Additional Information Maintenance information and precautions Built-in light (CCD-TRV107/TRV308/TRV408/TRV608 only) • Do not knock or jolt the built-in light while it is turned on as it may damage the bulb or shorten the life of the bulb.
88 Maintenance information and precautions About care and storage of the lens • Wipe the surface of the lens with a soft cloth in the following instances: – When there are fingerprints on the lens.
89 Additional Information Specifications Video camera recorder System Video recording system 2 rotary heads Helical scanning FM system Audio recording system Rotary heads, FM system Video signal NTSC color, EIA standards Usable cassette 8mm video format cassette Hi8 or standard 8 Recording/playback time (using 120 min.
90 Battery pack Maximum output voltage DC 8.4 V Output voltage DC 7.2 V Capacity 5.0 Wh (700 mAh) Operating temperature 0 ° C to 40 ° C (32 ° F to 104 ° F) Dimensions (approx.) 38.2 × 20.5 × 55.6 mm (1 9/16 × 13/16 × 2 1/4 in.) (w/h/d) Mass (approx.
91 Quick Reference — Quick Reference — Identifying the parts and contr ols 1 Eyecup 2 Viewfinder lens adjustment lever (p. 23) 3 V BATT release lever (p. 11) 4 USB connector (p. 61) (CCD-TRV608 only) 5 OPEN button (p. 19) 6 SEL/PUSH EXEC dial (p. 16, 67) 7 Power zoom lever (p.
92 qs Video control buttons (p. 29, 31) x STOP (stop) m REW (rewind) N PLAY (playback)* M FF (fastforward) X PAUSE (pause) qd LIGHT button (p. 46) (CCD-TRV107/TRV308/TRV408/ TRV608 only) qf Recording lamp (p. 19) qg Infrared rays emitter (p. 26) qh Remote sensor (p.
93 Quick Reference Identifying the parts and controls wa VOLUME + * / – buttons (p. 29) ws Speaker wd LCD screen (p. 19) wf EXPOSURE button (p. 40) wg TITLE button (p. 42, 44) wh EASY DUBBING button (p. 51) wj DISPLAY button (p. 30) wk END SEARCH button (p.
94 Identifying the parts and controls ef DATE button (p. 27) eg TIME button * (p. 27) eh COUNTER RESET button (p. 20) * This button has a tactile dot. ef eg eh.
95 Quick Reference Fastening the grip strap Fasten the grip strap firmly. Attaching the lens cap Attach the lens cap to the grip strap as illustrated. Identifying the parts and controls ej Z EJECT button (p. 18) ek Cassette compartment (p. 18) el Grip strap r; RESET button (p.
96 1 2 3 5 4 Remote Commander — CCD-TRV107/TRV408 only The buttons that share the same name on the Remote Commander and your camcorder function identically to the buttons on your camcorder.
97 Quick Reference Operation indicators LCD screen and Viewfinder Display window Identifying the parts and controls 1 Recording mode indicator (p. 70) / Mirror mode indicator (p. 20) 2 Hi8 format indication (p. 24) 3 Remaining battery time indicator (p.
98 Index A, B AC power adaptor ............... 15 Adjusting viewfinder .......... 23 A/V connecting cable ........................ 32, 49, 55 BACK LIGHT ....................... 25 Battery pack .......................... 11 BEEP .......................
.
Sony Corporation Printed in Japan *307231413*.
デバイスSony CCD-TRV107の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Sony CCD-TRV107をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSony CCD-TRV107の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sony CCD-TRV107の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sony CCD-TRV107で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sony CCD-TRV107を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSony CCD-TRV107の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sony CCD-TRV107に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSony CCD-TRV107デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。