SonyメーカーCDP-CE545の使用説明書/サービス説明書
ページ先へ移動 of 32
4-226-826- 11 (1) 2000 Sony Corporation CDP-CE545 Operating Instructions Compact Disc Player.
2 WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver.
3 T ABLE OF CONTENTS Getting Started Unpacking ............................................................................................................................. 4 Hooking Up the System ......................................................
Getting Started 4 Unpacking Check that you received the following items: • Audio cord (1) • Remote commander (remote) (1) • Size AA (R6) batteries (2) Inserting batteries into the remote You can control the player using the supplied remote.
Getting Started Getting Started 5 Hookups When connecting an audio cord, be sure to match the color-coded cord to the appropriate jacks on the components: Red (right) to Red and White (left) to White. Be sure to make connections firmly to avoid hum and noise.
Getting Started 6 What cords will I need? • Audio cord (1) (Use the cord supplied with the player to be connected.) • Monaural (2P) mini-plug cord (1) (not supplied) 1 Connect the players with an audio cord (see also “ Hookups ” on page 5). 2 Connect the players with a monaural (2P) mini- plug cord.
Getting Started Getting Started 7 4 Connect the AC power cord of both players to AC outlets. Notes • Do not connect a player other than that you use as the second player to the 2ND CD IN jacks of this player. • When connecting a second CD player, do not connect the DIGITAL OUT (OPTICAL) connector of this player to the amplifier.
Basic Operations 8 POWER CONTINUE AMS PUSH ENTER ( - AMS + ) (DISC) PHONES SHUFFLE PROGRAM DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 REPEAT TIME/TEXT EX- CHANGE DISC SKIP NO DELAY X-FADE CHECK CLEAR MEGA CONTROL SEARCH TIME FADE FADER MENU PEAK EDIT/ OPEN/CLOSE 1 2 3 Playing a CD 25 4 5 • See pages 4 - 5 for the hookup information.
Basic Operations Basic Operations 9 6 Press H . The disc tray closes and the player plays all the tracks once (Continuous Play). Adjust the volume on the amplifier. z You can select the disc you want to start playing first Press one of the DISC 1 - 5 buttons.
Playing CDs 10 12345 6789 1 0 12345 DISCS ALL DISC TRACK MIN SEC CD1 1 1 1.56 12345 6789 1 0 12345 DISCS ALL DISC TRACK MIN SEC CD1 1 1 -1.57 12345 6789 1 0 12345 DISCS ALL DISC TRACK MIN SEC CD1 1 -43.32 Using the Display You can check information about the disc using the display.
Playing CDs 11 12345 6789 1 0 12345 DISCS ALL TRACK CD-TEXT CD1 HitechBlues 12345 6789 1 0 12345 DISCS ALL DISC TRACK MIN SEC CD-TEXT CD1 2 1 1.56 12345 6789 1 0 12345 DISCS ALL DISC TRACK MIN SEC CD-TEXT CD1 2 1 -1.57 12345 6789 1 0 12345 DISCS ALL DISC TRACK MIN SEC CD-TEXT CD1 2 -58.
Playing CDs 12 Replacing Discs While Playing a Disc You can open the disc tray while playing a disc so that you can check what discs are to be played next and replace discs without interrupting play of the current disc. EX-CHANGE 1 Press EX-CHANGE. The disc tray opens and two disc compartments appear.
Playing CDs 13 Locating a Specific Disc You can locate any disc before or while playing a disc. DISC 1 - 5 DISC SKIP DISC SKIP +/– Number buttons DISC ENTER To locate The next disc The next or succe.
Playing CDs 14 Playing Repeatedly You can play discs/tracks repeatedly in any play mode. Press REPEAT while playing a disc. “ REPEAT ” appears in the display. The player repeats the discs/tracks as follows: REPEAT Locating a P articular Point in a T rack You can also locate a specific point in a track while playing a disc.
Playing CDs 15 Playing in Random Or der (Shuffle Play) You can have the player “ shuffle ” tracks and play in a random order. The player shuffles all the tracks on all discs or on the disc you ’ ve specified. SHUFFLE Shuffle Play on all discs You can play all tracks on all discs in a random order.
Playing CDs 16 A 25 8 12345 DISC TRACK STEP CD1 1 5 3 PROGRAM A 25 8 12345 DISC TRACK MIN SEC CD1 1 5 13.18 PROGRAM 3 Turn l AMS L until the track number you want appears in the display. The track number being programmed flashes and the total playing time including the track appears in the display.
Playing CDs 17 A 25 8 12345 DISC TRACK STEP CD1 1 5 3 PROGRAM A 25 8 12345 DISC TRACK MIN SEC CD1 1 5 13.18 PROGRAM z The program remains even after the Program Play ends When you press the H button, you can play the same program again. z The program remains until you erase it If you replace discs, the programmed disc and track numbers remain.
Playing CDs 18 Playing discs of the second CD player 1 Press MEGA CONTROL. The MEGA CONTROL button lights up and the display shows the current disc number of the second player. 2 Select the play mode you want. To program tracks, use the controls on the second player.
Playing CDs 19 To Pause Stop play Locate a disc while the second player is set to Continuous Play mode Locate a track You need to Press X Press x Turn l AMS (DISC) L until the display shows the disc n.
Playing CDs 20 3 Press H to start playing. The MEGA CONTROL button lights up while the track in the second player is selected. To check the X-Fade mode status Press X-FADE once. The X-Fade mode status appears momentarily. To cancel No-Delay/X-Fade Play Press the corresponding button repeatedly until the button goes off.
21 Recording From CDs Recording From CDs Recording Y our Own Pr ogr am You can record the program you ’ ve created on a tape, etc. The program can contain up to 32 steps. By inserting a pause during programming, you can divide the program into two for recording on both sides of a tape.
Recording From CDs 22 F ading In or Out You can manually fade the sound in or out to prevent tracks from starting or ending abruptly. Note that you cannot use this effect when you use the DIGITAL OUT (OPTICAL) connector. To Start play fading in End play fading out Note Fading lasts for about 5 seconds.
23 Recording From CDs Adjusting the Recording Level (P eak Sear ch) The player locates the highest level among the tracks to be recorded to let you adjust the recording level before you start recording.
Storing Information About CDs (Custom Files) 24 Storing Information About CDs (Custom Files) What Y ou Can Do With the Custom Files The player can store two types of information called “ Custom Files, ” up to 255 discs.
25 Storing Information About CDs (Custom Files) 1 Press DISC in Continuous Play Mode. 2 Press the number button of the disc you want to assign a Disc Name, and then ENTER. 3 Press NAME INPUT. The flashing cursor ( ) appears. 4 Press CAPS to find the letter type you want.
Storing Information About CDs (Custom Files) 26 Storing Specific T racks (Delete Bank) You can hide unwanted tracks and store only the tracks you want.
27 Additional Information Additional Information Notes on CDs On handling CDs • To keep the disc clean, handle the disc by its edge. Do not touch the surface.
Additional Information 28 Specifications Compact disc player Laser Semiconductor laser ( λ = 780 nm) Emission duration: continuous Laser output Max 44.6 µ W* * This output is the value measured at a distance of 200 mm from the objective lens surface on the Optical Pick-up block with 7 mm aperture.
29 Index A, B Advanced Mega Control 18 AMS 13 Automatic Music Sensor. See AMS C, D CD TEXT 11 Changing the Disc Names 25, 26 Connecting 4 another CD player 6 Continuous Play 8 Controlling another CD player 18 Custom Files Delete Bank 26 Disc Name 24 what you can do with 24 E Editing.
30.
31.
Sony Corporation Printed in China.
デバイスSony CDP-CE545の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Sony CDP-CE545をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSony CDP-CE545の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sony CDP-CE545の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sony CDP-CE545で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sony CDP-CE545を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSony CDP-CE545の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sony CDP-CE545に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSony CDP-CE545デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
