SonyメーカーDCR-PC1Eの使用説明書/サービス説明書
ページ先へ移動 of 132
3-864-275- 52 (1) ©1998 by Sony Corporation DCR-PC1E Digital Video Camera Recor der Operating Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference.
2 English W elcome! Congratulations on your purchase of this Sony Handycam Vision camcorder. With your Handycam Vision you can capture life’s precious moments with superior picture and sound quality. Your Handycam Vision is loaded with advanced features, but at the same time it is very easy to use.
3 Before you begin Перед началом эксплуатации English T able of contents DCR-PC1E(E) Table of contents 3 Before you begin 5 Using this manual .................................................... 5 Checking supplied accessories .
4 Русский Ог лавление DCR-PC1E(R) Оглавление 4 Перед началом эксплуатации 5 Использование данного руководства ................. 5 Проверка прилагаемых принадлежностей .
5 Before you begin Перед началом эксплуатации As you read through this manual, buttons and settings on the camcorder are shown in capital letters. e.g., Set the POWER switch to CAMERA. Note on Cassette Memory This camcorder is based on the DV format.
6 Precautions on camcorder care • The LCD screen and/or the colour viewfinder are manufactured using high-precision technology. However, there may be some tiny black points and/or bright points (red, blue or green in colour) that constantly appear on the LCD screen and/or in the viewfinder.
7 Before you begin Перед началом эксплуатации Проверьте, что следующие принадлежности прилагаются к Вашей видеокамере. 1 Беспроводный пульт дистанционного управления (1) (стр.
8 1 Before using your camcorder, you first need to charge and install the battery pack. To charge the battery pack, use the supplied AC power adaptor. This camcorder operates only with the “InfoLITHIUM” battery pack (S series). “InfoLITHIUM“ is a trademark of Sony Corporation.
9 Getting started Подготовка к эксплуатации Charging time Battery pack Charging time * NP-F10 (supplied) 145 (85) NP-F20 220 (160) NP-F30 295 (235) The time required for a normal charge is indicated in parentheses. Only the battery packs listed above can be used with this camcorder.
10 About NP-F10 The battery life will be shorter when you carry out recording in a cold place or with the LCD panel open. We recommend that you use the NP-F20/F30 large capacity battery pack (not supplied). When using the battery pack in a cold place Keep it warm by putting it into your pocket and install it in the camcorder just before recording.
11 Getting started Подготовка к эксплуатации V T R C A M E R A OFF POWER Installing the battery pack ( 1 ) Set the POWER switch to OFF to prevent misoperation of the camcorder.
12 Inserting a cassette You can use mini DV cassette with logo* only. Make sure that the power source is installed. ( 1 ) Slide 6 OPEN/EJECT in the direction of the arrow 1 and open the lid in the direction of the arrow 2 . The cassette compartment automatically lifts up and opens.
13 Getting started Подготовка к эксплуатации Примечания • Не вставляйте кассету силой в кассетный отсек. Такое действие может повредить видеокамеру.
14 Make sure that the power source is installed and a cassette is inserted and that the START/STOP MODE switch (p. 19) is set to . Before you record one-time events, you may want to make a trial recording to make sure that the camcorder is working correctly.
15 Basic operations Основные операции Camera recording To stop recording momentarily [a] Press START/STOP. The “STBY” indicator appears in the viewfinder (Standby mode) . To finish recording [b] Press START/STOP again to stop recording.
16 Note on Recording mode This camcorder records and plays back in SP (standard play) mode and in LP (long play) mode. Select SP or LP in the menu system. In LP mode, you can record 1.5 times as long as in SP mode. Notes on LP mode •We recommend to use this camcorder to play back a tape recorded on this camcorder.
17 Basic operations Основные операции Camera recording Note on the beep sound The beep sounds when you operate the camcorder. Several beeps also sound as a warning of any unusual condition of the camcorder. Note that the beep sound is not recorded on the tape.
18 When you shoot a subject using a telephoto zoom If you cannot get a sharp focus while in extreme telephoto zoom, move the power zoom lever to the “W” side of the power zoom lever until the focus is sharp.
19 Basic operations Основные операции Camera recording Selecting the start/stop mode Your camcorder has two modes besides normal start/stop mode. These modes enable you to take a series of quick shots resulting in a lively video. ( 1 ) Set START/STOP MODE to the desired mode.
20 To extend the recording time in 5SEC mode Press START/STOP again before all the dots disappear. Recording continues for about 5 seconds from the moment you press START/ STOP. Notes on 5SEC recording • When you select ANTI GROUND SHOOTING or 5SEC , you cannot use the fade- in/fade-out function.
21 Basic operations Основные операции Notes on the LCD panel • When closing the LCD panel, turn it vertically until it clicks [a] . • When turning the LCD panel, turn it always vertically; otherwise, the camcorder body may be damaged or the LCD panel may not close properly [b] .
22 Camera recording Notes on mirror mode • When you turn the LCD panel 180 degrees, the camcorder enters mirror mode. • Using the mirror mode, you can record yourself while watching yourself on the LCD screen. • The picture on the LCD screen looks like a mirror-image while recording in mirror mode.
23 Basic operations Основные операции Hints for better shooting For hand-held shots, you will get better results by holding the camcorder according to the following suggestions: • Hold the camcorder firmly and secure it with the grip strap so that you can easily manipulate the controls with your thumb.
24 Hints for better shooting [d] [e] Располагайте видеокамеру на плоской поверхности или используйте треногу Постарайтесь р.
25 Basic operations Основные операции Using EDIT SEARCH, you can review the last recorded scene or check the recorded picture on the LCD screen. ( 1 ) Press OPEN and open the LCD panel. ( 2 ) While pressing the small green button on the POWER switch, set it to CAMERA.
26 You can monitor the playback picture on the LCD screen or in the viewfinder. ( 1 ) Insert the recorded tape with the window facing out. ( 2 ) Press OPEN and open the LCD panel. Adjust the angle of the LCD panel. ( 3 ) While pressing the small green button on the POWER switch, set it to VTR.
27 Basic operations Основные операции Playing back a tape To display the LCD screen indicators Press DISPLAY. (p. 122) To erase the indicators, press again. Note on screen indicators The screen indicators in the viewfinder are always displayed.
28 To monitor the high-speed picture while advancing the tape or rewinding (skip scan) Keep pressing 0 while rewinding or ) while advancing the tape. To resume normal rewinding or fast-forward, release the button. To view the picture at 1/3 speed (slow playback) Press & on the Remote Commander during playback.
29 Basic operations Основные операции Notes on playback • The sound is muted in the various playback modes. • During playback other than normal playback, the picture recorded or played back last time may appear in mosaic image. This is not malfunction.
30 Searching for the end of the picture You can go to the end of the recorded portion after you record and play back the tape. The tape starts rewinding or fast-forwarding and the last about 5 seconds of the recorded portion plays back. Then the tape stops at the end of the recorded picture (End Search) .
31 Advanced operations Усовершенствованные операции 4 3 You can choose any of the following power sources for your camcorder: battery pack and mains. Choose the appropriate power source depending on where you want to use your camcorder.
32 To remove the connecting plate The connecting plate is removed in the same way as the battery pack. WARNING The mains lead must only be changed at a qualified service shop. PRECAUTION The set is not disconnected from the AC power source (mains) as long as it is connected to the mains, even if the set itself has been turned off.
33 Advanced operations Усовершенствованные операции You can change the mode settings in the menu system to further enjoy the features and functions of the camcorder.
34 Note on mirror mode While recording in mirror mode, the menu does not appear on the LCD screen or in the viewfinder. Note on changing the mode settings Menu items differs depending on the setting of the POWER switch to VTR or CAMERA. Selecting the mode setting of each item r is set at factory.
35 Advanced operations Усовершенствованные операции Changing the mode settings Изменение установок режимов Ò REMAIN < r AUTO/ON> • Select A.
36 Items for CAMERA mode only PROGRAM AE* Select this item to use the PROGRAM AE function. See page 57 for details. WHT BAL* < r AUTO/HOLD/OUTDOOR/ INDOOR> • Normally select AUTO to adjust the white balance automatically. • Select HOLD when recording monochromatic subject or background.
37 Advanced operations Усовершенствованные операции CLOCK SET Select this item to reset the date or time. See page 92 for details. DEMO MODE < r STBY/ON or OFF> • Select STBY/ON to glance over the function of camcorder.
38 Items for VTR mode only HiFi SOUND* < r STEREO/1/2> • Select STEREO to play back stereo sound or main and sub sound (for dual sound). • Select 1 to play back the left sound (for stereo sound) or main sound (for dual sound). • Select 2 to play back the right sound (for stereo sound) or sub sound (for dual sound).
39 Advanced operations Усовершенствованные операции You can record a still picture like a photograph for about seven seconds. This mode is useful when you want to enjoy a picture such as a photograph or when you print a picture using a video printer (not supplied).
40 When shooting in the dark Install the video flash (not supplied) to the accessory shoe. If the exposure is in manual mode, we recomend you to set it to automatic exposure mode. When appears on the LCD screen or in the viewfinder, the video flash is ready to be used.
41 Advanced operations Усовершенствованные операции LINE IN VIDEO S VIDEO AUDIO VIDEO OUT/ 2 Photo recording Printing the still picture You can print a still picture by using the video printer (not supplied). Connect the video printer using the supplied A/V connecting cable.
42 Selecting the fader function You can fade in or out to give your recording a professional appearance. When the picture fades in, the sound gradually increases. When the picture fades out, the sound gradually decreases. Using the F ADER function FADER M.
43 Advanced operations Усовершенствованные операции Using the fader function When fading in [a] ( 1 ) While the camcorder is in Standby mode, press FADER until the desired indicator flashes. ( 2 ) Press START/STOP to start recording.
44 Для отмены функции введения/ выведения изображения Перед нажатием START/STOP нажимайте FADER до тех пор, пока индикатор не исчезнет.
45 Advanced operations Усовершенствованные операции You can record a 16:9 wide picture to watch on the 16:9 wide-screen TV (16:9 WIDE). The picture with black bands at the top and the bottom on the LCD screen or in the viewfinder [ a ] is normal.
46 [e] [a] [b] [f] [c] [d] Selecting picture effect The Picture Effect function allows you to make pictures like those on television. You can also see pictures while using this function during playback. NEG. ART [a]* The colour of the picture is reversed.
47 Advanced operations Усовершенствованные операции 2 3 1 STILL STILL DIGIT AL EFFECT Superimposing a still pictur e on a moving picture Using the still function, you can record a still picture to be superimposed on a moving picture.
48 Recor ding still pictur es successively Using the flash motion function, you can record still pictures successively at constant intervals. The sound is recorded normally. ( 1 ) While the camcorder is in Standby mode or recording mode, press DIGITAL EFFECT and turn the control dial until the FLASH indicator flashes.
49 Advanced operations Усовершенствованные операции To cancel the flash motion function Press DIGITAL EFFECT. Notes on the flash motion function • You cannot use the following functions during the flash motion recording.
50 ( 1 ) While the camcorder is in Standby mode or recording mode, press DIGITAL EFFECT and turn the control dial until the LUMI. indicator flashes. ( 2 ) Press the control dial. The LUMI. indicator lights up and the luminancekey bars appear. The still picture is stored in memory.
51 Advanced operations Усовершенствованные операции Using the trail function, you can record the picture which leaves an incidental image, such as a trail. The sound is recorded normally. You can adjust the vanishing time of the incidental image with the control dial.
52 If you want to record a dark picture more brightly, or make the movement of the subject seem lively, set the shutter speed to 1/25, 1/12, 1/6 or 1/3 (slow shutter). ( 1 ) While the camcorder is in Standby mode or recording mode, press DIGITAL EFFECT and turn the control dial until the SLOW SHTR (shutter) indicator flashes.
53 Advanced operations Усовершенствованные операции Adding an old movie type atmospher e to pictures Using the old movie function, you can record the picture such as an old movie. The camcorder automatically sets the wide mode to ON, picture effect to SEPIA, and the appropriate shutter speed.
54 Shooting with backlighting Съемка с задней по дсветк ой When you shoot a subject with the light source behind the subject or a subject with a light background, use the BACK LIGHT function. Press BACK LIGHT. The c indicator appears on the LCD screen or in the viewfinder.
55 Advanced operations Усовершенствованные операции When to adjust the exposure Adjust the exposure manually under the following cases.
56 White balance adjustment makes white subjects look white and allows more natural colour balance for camera recording. Normally white balance is automatically adjusted. You can obtain better results by adjusting the white balance manually when lighting conditions change quickly or when recording outdoors: e.
57 Advanced operations Усовершенствованные операции You can select from seven PROGRAM AE (Auto Exposure) modes to suit your shooting situation. When you use PROGRAM AE, you can get a Portrait effect (the subject is in focus and the background is out of focus), capture high-speed action, record night views, etc.
58 Using the PROGRAM AE function Select the desired PROGRAM AE mode in the menu system (P. 33). To return to automatic adjustment mode Select AUTO in the menu system.
59 Advanced operations Усовершенствованные операции Focusing manually When to use manual focus In the following cases you should obtain better results by adjusting the focus manually. • Insufficient light [a] • Subjects with little contrast — walls, sky, etc.
60 Focusing manually When focusing manually, first focus in telephoto before recording, and then reset the shot length. ( 1 ) Press FOCUS lightly. The f indicator appears on the LCD screen or in the viewfinder. ( 2 ) Turn the focus ring to focus on the subject.
61 Advanced operations Усовершенствованные операции If you use a tape with cassette memory, you can superimpose the titles while recording or after recording. When you playback the tape, the title is displayed for 5 seconds from the point where you superimposed it.
62 Superimposing titles ( 1 ) Press TITLE to display the titles on the LCD screen. ( 2 ) Turn the control dial to select , then press the control dial. ( 3 ) Turn the control dial to select the title, then press the control dial. ( 4 ) Turn the control dial to select COLOUR, SIZE or POSITION, then press the control dial.
63 Advanced operations Усовершенствованные операции While you are playing back, pausing, or recording After step 7, the “TITLE SAVE” indicator appears on the screen for 5 seconds and the title is set. While in Standby mode After step 7, the “TITLE” indicator appears.
64 Superimposing a title Notes on titles • You cannot superimpose a title to a blank portion of the tape. • The titles you superimposed are displayed by only using the DV format video equipment with index titler function.
65 Advanced operations Усовершенствованные операции Erasing a title ( 1 ) Press MENU to display the menu on the LCD screen. ( 2 ) Turn the control dial to select , then press the control dial. ( 3 ) Turn the control dial to select TITLEERASE, then press the control dial.
66 If you use a tape with cassette memory, you can make two titles of up to 20 characters and store it in memory. ( 1 ) Press TITLE to display the titles on the LCD screen.
67 Advanced operations Усовершенствованные операции To erase a character In step 4, turn the control dial to select [ M ] then press the control dial.
68 If you use a tape with cassette memory, you can label a cassette. The label can consist of up to 10 characters and is stored in cassette memory. When you insert the labeled cassette and set the POWER switch to VTR, the label is displayed for about 5 seconds on the LCD screen, in the viewfinder or on the TV screen.
69 Advanced operations Усовершенствованные операции To erase a character In step 5 turn the control dial to select [ M ], then press control dial. The last character is erased. To change the label you have made Insert the cassette to change the label, and operate in the same way to make a new label.
70 AUDIO VIDEO IN VCR TV S-VIDEO [b] [a] S VIDEO OUT AUDIO VIDEO OUT/ 2 Connecting directly to a VCR/TV with Audio/Video input jacks Open the jack cover and connect the camcorder to the inputs on the TV by using the supplied A/ V connecting cable. Set the TV/VCR selector on the TV to VCR.
71 Advanced operations Усовершенствованные операции Enjoying digital ef fect during playback During playback, you can process a scene using the digital effect functions; Still, Flash motion, Luminancekey and Trail. For the features of each function, refer to previous pages.
72 You can search for the boundaries of recorded date - Date Search function. To search for the beginning of the specific date and play back from the point, there are two ways: • Using cassette memory, you can select the date displayed on the LCD screen or in the viewfinder.
73 Advanced operations Усовершенствованные операции Searching the boundaries of recorded tape with date – date search Поиск границ на записанной ленте с помощью даты – поиск даты To stop searching Press p .
74 To stop searching Press p . Для остановки поиска Нажмите кнопку p . Searching for the date without using cassette memory You can use this function whether the tape has cassette memory or not. ( 1 ) Set CM SEARCH to OFF in the menu system (P.
75 Advanced operations Усовершенствованные операции You can search for the boundaries of recorded tape with title – Title search function. If you use a tape with cassette memory, you can select the title displayed on the LCD screen or in the viewfinder.
76 To stop searching Press p . Notes • You cannot superimpose or search a title, if you use a cassette tape without cassette memory. • The camcorder may not search, if a tape has a blank portion in the recorded portions.
77 Advanced operations Усовершенствованные операции Searching for a photo – photo search/photo scan Searching for a photo by using cassette memory You can use this function only when playing back a tape with cassette memory (p.
78 CM SET CM SEARCH TITLEERASE TITLE DISP TAPE TITLE ERASE ALL [MENU] : END CM SET CM SEARCH TITLEERASE TITLE DISP TAPE TITLE ERASE ALL [MENU] : END OFF 3 =+ PHOTO 01 SEARCH 2 SEARCH MODE PHOTO 00 SEARCH 1 MENU Searching for a photo without using cassette memory You can use this function whether the tape has cassette memory or not.
79 Advanced operations Усовершенствованные операции F1. 7 9 dB 1 SEARCH MODE PHOTO 00 SCAN =+ 2 Scanning photo You can use this function whether the tape has cassette memory or not. ( 1 ) Press SEARCH MODE on the Remote Commander repeatedly until the photo scan indicator displayed on the LCD screen.
80 Using the Remote Commander, you can easily go back to the desired point on a tape after playback. ( 1 ) During playback, press ZERO SET MEMORY at the point you later want to locate. The counter shows “0:00:00” and “ZERO SET MEMORY” appears on the LCD screen or in the viewfinder.
81 Advanced operations Усовершенствованные операции You can display recording data (date/time or various settings when recorded) on the LCD screen or in the viewfinder during playback - Data Code function. When DISPLAY in the menu is set toV-OUT/LCD, the Data Code is also displayed on the TV.
82 You can create your own video programme by editing with any other DV, mini DV, h 8 mm, H Hi8, j VHS, k S-VHS, VHSC, K S-VHSC or l Betamax VCR that has audio/video inputs. You can edit with little deterioration of picture and sound quality when using the DV connecting cable.
83 Advanced operations Усовершенствованные операции VCR TV S VIDEO OUT AUDIO VIDEO OUT/ 2 [b] [a] AUDIO VIDEO IN S-VIDEO Notes on editing when using the DV connecting cable • You can connect one VCR only.
84 Edición en otra cinta Notes on editing when using the A/V connecting cable • Press DATA CODE, SEARCH MODE, or DISPLAY to turn off the display indicators. Otherwise, the indicators will be recorded on the tape. • If your TV or VCR is a monaural type, connect the yellow plug of the A/V connecting cable for video to the TV or VCR.
85 Advanced operations Усовершенствованные операции Replacing recor ding on a tape – insert editing You can insert a new scene from a VCR onto your originally recorded tape by specifying starting and ending points. Connection is the same as in “Using the DV connecting cable” on page 82.
86 LINE OUT You can record an audio sound to add to the original sound on a tape by connecting audio equipment or a microphone. If you connect the audio equipment, you can add a sound on your recorded tape by specifying starting and ending points. The original sound will not be erased.
87 Advanced operations Усовершенствованные операции Notes on audio dubbing • A new sound cannot be recorded on a tape already recorded in the 16BIT mode (32 kHz, 44.1 kHz or 48 kHz). • When an external microphone is not connected, the recording will be made through the built-in microphone of the camcorder.
88 To play back the new recorded sound Adjust the balance between the original sound (ST1) and the new sound (ST2) by selecting AUDIO MIX in the menu system. Notes on AUDIO MIX Five minutes after when you disconnect the power source or remove the battery pack, the settings of AUDIO MIX return to the original sound (ST1) only.
89 Additional information Дополнительная информация Selecting cassette types You can use the mini DV cassette only. You cannot use any other DV, h 8 mm, H Hi8, j VHS, k S-VHS, VHSC, K S-VHSC or l Betamax cassette. We recommend mini DV cassette with cassette memory.
90 When you play back Copyright signal When playing back Using any other video camera recorder, you cannot record on a tape that has recorded a copyright control signals for copyright protection of software which is played back in this camcorder.
91 Additional information Дополнительная информация Notes on the mini DV cassette To prevent accidental erasure Slide out the protect tab on the cassette so that the red portion is visible.
92 The date and time are set at the factory. Set the time according to the local time in your country. ( 1 ) Press MENU to display the menu on the LCD screen. ( 2 ) Turn the control dial to select , then press the control dial. ( 3 ) Select CLOCK SET, then press the control dial.
93 Additional information Дополнительная информация Resetting the date and time Установка даты и времени 1998 1999 2029 ... 2000 ... 1998 1999 2029 ... 2000 ... About the lithium battery Your camcorder is supplied with a rechargeable lithium battery installed so as to retain the date and time, etc.
94 Simple setting of clock by time differ ence You can easily set the clock for a local time by a time difference in the menu system. ( 1 ) Press MENU to display the menu on the LCD screen. ( 2 ) Turn the control dial to select , then press the control dial.
95 Additional information Дополнительная информация This section shows you how you can get the most out of your battery pack. Preparing the battery pack Always carry additional batteries Have sufficient battery pack power to do 2 to 3 times as much recording as you have planned.
96 Notes on the rechargeable battery pack Caution Never leave the battery pack in temperatures above 60°C (140°F), such as in a car parked in the sun or under direct sunlight. The battery pack heats up During charging or recording, the battery pack heats up.
97 Additional information Дополнительная информация Notes on the “InfoLITHIUM” Battery Pack What is the “InfoLITHIUM” battery pack The “InfoLITHIUM” battery pack is a lithium battery pack which can exchange data with compatible video equipment about its battery consumption.
98 Tips for using the battery pack To obtain more accurate remaining battery indication Set the camcorder to recording standby mode and point towards a stationary object. Do not move the camcorder for 30 seconds or more. • If the indication seems incorrect, use up the battery and then recharge it fully (Full charge 1) ).
99 Additional information Дополнительная информация Notes on charging A brand-new battery pack A brand-new battery pack is not charged. Before using the battery pack, charge it completely. Recharge the battery pack whenever you like You do not have to discharge it before recharging.
100 Moisture condensation If the camcorder is brought directly from a cold place to a warm place, moisture may condense inside the camcorder, on the surface of the tape, or on the lens. In this condition, the tape may stick to the head drum and be damaged or the camcorder may not operate correctly.
101 Additional information Дополнительная информация Video head cleaning To ensure normal recording and clear pictures, clean the video heads.
102 Removing dust from inside the viewfinder ( 1 ) Pull out the viewfinder 1 . Remove the screw 2 with a screwdriver (not supplied). While pressing the right side of the catch 3 using a sharp-pointed object, remove the eyecup 4 . ( 2 ) Remove dust from inside the eyecup and viewfinder with a commercially available blower.
103 Additional information Дополнительная информация On handling tapes • Do not insert anything in the small holes on the cassette. • Do not open the tape protect cover or touch the tape. • Avoid touching or damaging the terminals.
104 • Be sure that nothing metallic comes into contact with the metal parts of the connecting plate. If this happens, a short may occur and the unit may be damaged. • Always keep the metal contacts clean. • Do not disassemble the unit. • Do not apply mechanical shock or drop the unit.
105 Additional information Дополнительная информация Each country or area has its own electric and TV colour systems. Before using your camcorder abroad, check the following points. Power sources You can use your camcorder in any country or area with the supplied AC power adaptor within 100 V to 240 V AC, 50/60 Hz.
106 English T r ouble check If you run into any problem using the camcorder, use the following table to troubleshoot the problem. Should the difficulty persist, disconnect the power source and contact your Sony dealer or local authorized Sony service facility.
107 Additional information Дополнительная информация Operation Symptom The tape does not move when a tape transport button is pressed. No sound or only a low sound is heard when playing back a tape. The new sound added to the recorded tape is not heard.
108 Operation Symptom The title search function does not work. indicator does not appear when using a tape with cassette memory. The Date Search, Title Search, or End Search does not work correctly. Picture Symptom The image on the viewfinder screen is not clear.
109 Additional information Дополнительная информация Picture Symptom The picture appears a little later on the LCD screen or in the viewfinder when you set the POWER switch to CAMERA. A display such as “C: ππ : ππ ” appears on the LCD screen or in the viewfinder.
110 When the CHARGE lamp flashes Check through the following chart. Remove the battery pack from the AC power adaptor. Then install the same battery pack again. When the CHARGE lamp flashes again Install another battery pack. When the CHARGE lamp does not flash again If the CHARGE lamp lights up and goes out after a while, there is no problem.
111 Additional information Дополнительная информация Cause and/or corrective actions • Moisture condensation has occurred. m Remove the cassette and leave the camcorder for at least 1 hour. (p. 100) • The video heads are dirty.
112 Если у Вас возникла какая-либо проблема при использовании видеокамеры, воспользуйтесь следующей таблицей для отыскания и устранения проблемы.
113 Additional information Дополнительная информация Проверка неисправностей Работа Признак Лента не перемещается при нажатии кнопки перемещения ленты.
114 Работа Признак Функция отображения дыты записи, поиска даты не работает. Функция поиска титра не работает. Индикатор не появляется при использовании ленты с кассетной памятью.
115 Additional information Дополнительная информация Изображение Признак Незнакомое изображение появляется на экаране ЖКД или в видоискателе.
116 Проверка неисправностей Снимите батарейный блок с сетевого адаптера перем. тока.
117 Additional information Дополнительная информация C : 21: 00 Причина и/или действия по исправлению • Произошла конденсация влаги. m Выньте кассету и оставьте видеокамеру по меньшей мере на 1 час.
118 Video camera recorder System Video recording system Two rotary heads, Helical scanning system Audio recording system Rotary heads, PCM system Quantization: 12bits (Fs 32kHz, stereo 1, stereo 2), 1.
119 Additional information Дополнительная информация Видеокамера Система Система видеозаписи Две вращающиеся головки, .
120 2 3 4 5 6 7 1 8 9 !º !¡ !™ !£ !¢ !∞ Identifying the parts 1 Lens cap (p. 14) 2 LCD screen (p. 20) 3 Power lamp (p. 14, 26) 4 Speaker 5 OPEN button (p. 20) 6 FADER button (p. 42) 7 BACK LIGHT button (p. 54) 8 Built-in microphone 9 Accessory shoe (p.
121 Additional information Дополнительная информация Identifying the parts !§ PHOTO button (p. 39) !¶ START/STOP MODE swtich (p. 19) !• Viewfinder lens adjustment lever (p. 15) !ª Cassette lid (p. 12) @º Tripod receptacle (p.
122 Identifying the parts @™ END SEARCH button (p. 25, 30) @£ EDIT SEARCH buttons (p. 25) @¢ LCD BRIGHT buttons (p. 20, 26) @∞ VOLUME buttons (p. 26) @§ DISPLAY button (p. 27) @¶ DIGITAL EFFECT button (p. 47) @• MENU button (p. 33) @ª Tape operation buttons (p.
123 Additional information Дополнительная информация Identifying the parts #™ FOCUS button (p. 60) #£ Cassette compartment (p. 12) #¢ RESET button (p. 109) #∞ Grip strap (p. 23) #§ Zoom lever (p. 17) #¶ Focus ring (p. 60) #• Lens #ª Remote sensor (p.
124 Identifying the parts Опознавание частей $¡ DV IN/OUT jack (p. 82) This “i.LINK” mark is a trademark of Sony Corporation and indicates that this product is in agreement with IEEE 1394-1995 specifications and their revisions. The DV IN/OUT jack is i.
125 Additional information Дополнительная информация Remote Commander The buttons that have the same name on the Remote Commander as on the camcorder function identically. 1 PHOTO button (p. 39) 2 DISPLAY button (p. 27) 3 SEARCH MODE button (p.
126 To prepare the Remote Commander To use the Remote Commander, you must insert two R6 (size AA) batteries. Use the supplied R6 (size AA) batteries. ( 1 ) Remove the battery cover from the Remote Commander. ( 2 ) Insert both of the R6 (size AA) batteries with correct polarity.
127 Additional information Дополнительная информация Notes on the Remote Commander • Keep the remote sensor away from strong light sources such as direct sunlight or illumination. Otherwise, the remote control may not be effective.
128 Operation indicators 1 Recording mode indicator (p. 15) /Mirror mode indicator (p. 21) 2 Cassette Memory indicator (p. 5) 3 Remaining battery indicator (p. 95) 4 Zoom indicator (p. 17) /Exposure indicator (p. 55) 5 FADER indicator (p. 42) /DIGITAL EFFECT indicator (p.
129 Additional information Дополнительная информация !£ Time code indicator (p. 16) /Self-diagnosis indicator (p. 111) /Photo mode indicator (p. 39) /5SEC mode indicator (p. 19) !¢ Remaining tape indicator (p. 17) !∞ ZERO SET MEMORY indicator (p.
130 If indicators flash or warning messages appear on the LCD screen or in the viewfinder, check the following: : you can hear the melody or beep sound when BEEP is set to MELODY or NORMAL in the menu system. 1 The battery is weak or dead. Slow flashing: The battery is weak.
131 Additional information Дополнительная информация 4 No tape has been inserted. 5 The tab on the tape is out (red). 6 Moisture condensation has occurred. (p. 100) 7 The video heads may be contaminated. (p. 101) 8 The clock is not set.
Index A, B Adjusting viewfinder ................ 15 ANTI GROUND SHOOTING . 19 Audio dubbing ........................... 87 Audio mode ................................ 90 Auto focus ................................... 60 Backlight .....................
デバイスSony DCR-PC1Eの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Sony DCR-PC1Eをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSony DCR-PC1Eの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sony DCR-PC1Eの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sony DCR-PC1Eで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sony DCR-PC1Eを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSony DCR-PC1Eの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sony DCR-PC1Eに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSony DCR-PC1Eデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。