SonyメーカーDIGIMAX S850の使用説明書/サービス説明書
ページ先へ移動 of 88
《 1 》 Instructions Getting to know your camera Thank you for buying a Samsung Digital Camera. ● Prior to using this camera, please read the user manual thoroughly. ● When you require After Sales service, please bring the camera and the cause of the camera malfunction (such as battery, Memory card etc.
Danger 《 2 》 W arning WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. ■ Do not use the flash in close proximity to people or animals. Positioning the flash too close to your subject’s eyes may cause eyesight damage.
《 3 》 Caution Contents CAUTION indicates a potentially hazardous situation which, if not avoided, may result in a minor or moderate injury. ■ Leaking, overheating, or damaged battery could result in fire or injury. • Use battery with the correct specification for the camera.
《 4 》 Contents ■ E (Effect) button ………………… 27 ■ Special Effect : Colour …………… 27 ■ Special Effect : Preset focus frames ……………… 28 ■ Special Effect : Com.
《 5 》 System chart Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the optional equipment, contact your nearest Samsung dealer or Samsung service centre. Software CD (see p.
《 6 》 Identification of features Shutter button Lens / Lens cover Mode dial Power button Speaker Microphone Flash Self-timer lamp / Auto focus lamp USB / AV connection terminal DC input connection.
《 7 》 Identification of features Back & Bottom LCD monitor Tripod socket 5 function button E (Effects) button Strap eyelet Play mode / Printer button Zoom T button (Digital zoom) Zoom W button.
《 8 》 Identification of features Bottom / 5-function button Battery chamber Battery chamber cover Voice memo / Voice Recording / Up button Flash / Left button Menu / OK button Self-timer / Right b.
《 9 》 Connecting to a Power Source Identification of features ● We recommend using batteries for a digital camera (Within a year from the date of manufacture).
《 10 》 Connecting to a Power Source Important information about battery usage ● When the camera is not used, turn off the camera power. ● Please remove the battery if the camera will not be used for long periods. Battery can lose power over time and are prone to leaking if kept inside the camera.
《 11 》 Instructions on how to use the memory card ● Be sure to format the memory card (see p.63) if you are using a newly purchased memory for the first time, if it contains data that the camera cannot recognise, or if it contains images captured with a different camera.
《 12 》 Instructions on how to use the memory card [ SD (Secure Digital) memory card ] Write protect switch Label Card pins ■ The camera can use SD/SDHC Memory Cards and MMC (Multi Media Cards). Please consult the enclosed manual for using the MMC Cards.
《 13 》 LCD monitor indicator [Image & Full Status] ② ③ ⑤ ④ ⑥ ⑦ ⑧ ⑨ ⑯ ⑮ ⑬ ⑭ ⑱ ⑰ ⑳ ⑲ ⑫ ⑩ ⑪ ① ■ The LCD monitor displays information about the shooting functions and selections. No. Description Icons Page 2 Battery p.
《 14 》 Starting the recording mode ■ How to use the PROGRAM mode ( ) Selecting the automatic mode will configure the camera with optimal settings. You can still manually configure all functions except the aperture value and shutter speed. 1. Select the PROGRAM mode by rotating the mode dial.
《 15 》 Starting the recording mode ■ How to use the MANUAL mode ( ) You can manually configure all functions with the aperture value and shutter speed. 1. Select the MANUAL mode by rotating the mode dial. 2. Press the + / - button and menu for the shutter speed and aperture value will display.
《 16 》 Starting the recording mode [SCENE mode] ※ The scene modes are listed below. [Nightscene] ( ) : Use this for shooting still images at night or in other dark conditions. [Portrait] ( ) : To take a picture of a person. [Children] ( ) : T o take a picture of fast moving objects, for example, children.
《 17 》 Starting the recording mode ■ Pausing while recording a movie clip (Successive Recording) This camera allows you to temporarily stop during unwanted scenes, while recording a movie clip. Using this function, you can record your favourite scenes into a movie clip without having to create multiple movie clips.
《 18 》 Starting the recording mode Things to W atch Out for When T aking Pictures ■ How to use the VOICE RECORDING mode ( ) A voice can be recorded for as long as the available recording time (max:1hour) allows. 1. In any mode with the exception of Movie clip mode, select the VOICE RECORDING mode by pressing the Voice recording button twice.
《 19 》 Things to W atch Out for When T aking Pictures Using the camera buttons to set the camera ■ The recording mode function can be set up by using the camera buttons.
《 20 》 ZOOM W / T button [ TELE zoom ] [ Optical zoom 2X ] [ WIDE zoom ] Pressing the ZOOM W button Pressing the ZOOM W button [ Digital zoom 5X ] [ TELE zoom ] [ WIDE zoom ] Pressing the ZOOM W button Pressing the ZOOM W button ● WIDE Zoom Optical zoom WIDE : Pressing the ZOOM W button.
《 21 》 V oice recording( ) / V oice memo( ) / UP button ■ While the menu is showing, press the UP button to move up the sub menu. When the menu is not displayed on the LCD monitor, the UP button operates as the voice recording or voice memo ( ) button.
《 22 》 Macro( )/ Down button ■ While the menu is showing, press the DOWN button to move from the main menu to a sub menu, or to move down the sub menu. When the menu is not showing, you can use the MACRO / DOWN button to take macro pictures. The distance ranges are shown below.
《 23 》 Macro( )/ Down button Focus lock ■ Available focusing method, by recording mode (O: Selectable , X: Not selectable, ∞ : Infinity focus range) O OOO O X O X OOO O X O O XXX X O X X OOO O.
《 24 》 Flash ( )/ Left button ● Flash range (Unit : m) ■ When the menu is displayed on the LCD monitor, pressing the LEFT button makes the cursor shift to the left tab. ■ When the menu is not displayed on the LCD monitor, the LEFT button operates as the FLASH ( ) button.
《 25 》 Flash ( )/ Left button Scene modes ● Available flash mode, by recording mode (O : Selectable X : Not selectable) XXOX X X X XOOX X X X XXO O O O X XXOX X X X OO OO O O O XX XXX X X X X X .
《 26 》 MENU / OK button ■ MENU button - When you press the MENU button, a menu related to each camera mode will be displayed on the LCD monitor. Pressing it again will return the LCD to the initial display. - A menu option can be displayed for MOVIE CLIP and STILL IMAGE.
● This button will not operate in the ASR, Voice recording and some scene modes (Night, Text, Sunset, Dawn, Backlight, Firework, Beach & Snow). ● When or is selected, only menu of the Effect menus can be selected.
《 28 》 Special Effect : Preset focus frames Capture:SH Edit:+/- Capture:SH Edit:+/- Capture:SH Move : ● Moving and changing the focus frame You can change the focus frame after selecting a Range menu. 1. Point the camera towards the subject and compose the image by using the LCD monitor.
《 29 》 Special Effect : Composite shooting ■ You can combine 2 - 4 different shots in a still image 1. Press the E button in the available camera modes(Not available: Movie clip, Voice, Auto, Manual, ASR, Scene). 2. Select the menu by pressing the Left/ Right button.
《 30 》 Special Effect : Composite shooting Special Effect : Photo Frame ■ You can add 9 types of frame-like borders to a still image you want to capture. ■ Date & Time information will not be printed on the stored image taken with Photo Frame menu.
《 31 》 +/ - button Movie Clip frame stabiliser Special Effect : Photo Frame ■ You can use the +/ - button to adjust the values for the RGB, ISO, white balance and exposure compensation. ■ This function helps stabilise images captured during movie recording.
《 32 》 +/ - button ● Selecting an ISO Sensitivity 1. Press the +/ - button, and then use the UP and DOWN buttons to select the ISO icon( ). The ISO menu bar will appear as shown. 2. Use the LEFT and RIGHT buttons to select the desired ISO sensitivity value.
《 33 》 ● Using the Custom White Balance White balance settings may vary slightly depending on the shooting environment. You can select the most appropriate white balance setting for a given shooting environment by setting up the custom white balance.
Using the LCD monitor to set the camera settings 《 34 》 ■ You can use the menu on the LCD monitor to set up recording functions. In any mode with the exception of VOICE RECORDING mode, pressing the MENU button displays the menu on the LCD monitor.
《 35 》 How to use the menu Using the LCD monitor to set the camera settings Menu tab Main menu Sub menu Camera working mode Page Single Continuous Motion Capture AEB p.38 Interval - Soft Normal Vivid - Full Basic LCD Save - p.39 SHOOTING p.39 OSD INFORMATION ※ * 30 FPS cannot be used in 800X592, 720X480 size.
《 36 》 Icon Sub menu Super Fine Fine Normal 30 FPS 20 FPS 15 FPS File Format jpeg jpeg jpeg avi avi avi [ STILL IMAGE mode ] QUALITY Super Fine Fine Normal [ MOVIE CLIP mode ] FRAME RATE 30 FPS 20 FPS 15 FPS ■ You can select the compression ratio appropriate for your application of the captured images.
《 37 》 Auto Focus type Metering ■ If you cannot obtain suitable exposure conditions, you can change the metering method to take brighter pictures. [Multi] : Exposure will be calculated based on an average of the available light in the image area.
《 38 》 Continuous shot - [Single] : Take one picture only - [Continuous] : Images will be taken continuously until the shutter button is released. The shooting capacity depends on the memory. - [Motion Capture] : This takes 30 shots per second, when the shutter is pressed and held down.
《 39 》 OSD (On Screen Display) information Sharpness ■ You can adjust the sharpness of the picture you want to take. You cannot check the sharpness effect on the LCD monitor before you take a picture, because this function is applied only when the captured image is stored on the memory.
《 40 》 Starting play mode ● Playing back a movie clip Steps from 1-2 are the same as those to play back a still image. 3. Select the recorded movie clip and press the Play & Pause button to play back. - To pause a movie clip file while playing it back, press the play & pause button again.
《 41 》 Starting play mode ■ Movie clip capture function : capture still images from the movie clip. ● How to capture the movie clip Steps 1-3 are the same as those for playing back a movie clip. 4. Press the Play / Pause button while playing the movie clip.
《 42 》 Starting play mode LCD monitor Indicator ■ The LCD monitor displays shooting information about the displayed image. No. Description Icon Page 1 Play mode icon - 2 Battery p.10 3 Voice Memo p.21 4 Protect p.53 5 DPOF p.55 6 Recording date 2007/01/01 p.
《 43 》 [ Thumbnail display mode ] Using the camera buttons to set the camera Thumbnail( )/ Enlargement ( ) button ■ In Play mode, you can use the buttons on the camera to conveniently set up the Play mode functions. ● Image enlargement 1. Select an image that you want to enlarge and press the enlargement button.
《 44 》 Thumbnail ( )/ Enlargement ( ) button ■ When the menu is displayed on the LCD monitor, pressing the UP button makes the menu cursor move up. ■ When the menu is not displayed on the LCD monitor, the UP button operates as the voice memo button.
《 45 》 ■ In Play mode, the play & pause/ down button works as follows: - If the menu is displayed Press the DOWN button to move from the main menu to a sub menu, or to move down the sub menu cursor.
《 46 》 Delete ( ) button ■ This deletes images stored on the memory. ● Deleting Images in Play Mode 1. Select an image that you want to delete by pressing the LEFT/ RIGHT button and press the DELETE( ) button. 2. A message will display as shown alongside on the LCD monitor.
《 47 》 Printer button Left/ Right/ Menu/ OK button ■ LEFT/ RIGHT/ MENU/ OK buttons activate the following. - LEFT button : While the menu is showing, press the LEFT button to select the menu tab to the left of the cursor. While the menu is not showing, press the LEFT button to select the previous image.
《 48 》 ■ PLAY mode functions can be changed by using the LCD monitor. In the PLAY mode, pressing the MENU button displays the menu on the LCD monitor. The menus you can set up in Play mode are as follows. To capture an image after setting up the play menu, press the PLAY mode button or shutter button.
《 49 》 Setting up the play back function using the LCD monitor Menu tab Main menu Sub menu Secondary menu Page One Pic - All Pics - No - Yes - Auto PostCard Card 4X6 L 2L Letter A4 A3 Auto Full 1 2 4 8 9 16 Index IMAGES AUTO SET CUSTOM SET Size p.
《 50 》 Starting the slide show SLIDE Show Interval Effect Music Back: Set:OK Off ● Configure slide show effects : Unique screen effects can be used for the slide show. 1. Select the [Effect] sub menu by pressing the UP/ DOWN button and press the RIGHT button.
《 51 》 On Screen Display information Rotating an image ■ You can check shooting information about the displayed image. ● How to select the type of information you want to see 1. Press the play mode button and press the menu button. 2. Select the [OSD INFORMATION] menu tab by pressing the LEFT/ RIGHT button.
《 52 》 Resize ■ Change the resolution (size) of pictures taken. Select the [User Image] to save an image to be the start-up image. The resized image will have a new file name. 1. Press the play mode button and press the menu button. 2. Press the LEFT/ RIGHT button and select the [RESIZE] menu tab.
《 53 》 Protecting images ■ This is used to protect specific shots from being accidentally erased (Lock). It also unprotects images that have been previously protected (Unlock). ● Protecting Images 1. Press the play mode button and press the menu button.
《 54 》 Copy T o Card ■ This enables you to copy image files, movie clips and voice recording files to the memory card. ● Copying to the Memory Card 1. Press the play mode button and press the menu button. 2. Select the [COPY TO CARD] menu tab by pressing the LEFT/ RIGHT button.
《 55 》 DPOF DPOF : Standard 1. Press the play mode button and press the menu button. 2. Press the LEFT/ RIGHT button and select the [DPOF] menu tab. 3. Select the [Standard] menu by pressing the UP/ DOWN button and press the RIGHT button. 4. Select a desired sub menu by pressing the UP/ DOWN button and press the OK button.
《 56 》 DPOF : Print size DPOF : Index ■ You can specify the print size when printing images stored on the memory card. The [Size] menu is available only for DPOF 1.1 compatible printers. ● Setting the Print Size 1. Press the play mode button and press the menu button.
《 57 》 PictBridge : Picture Selection PictBridge ■ Easy printing When you connect the camera to printer in the Play back mode, you can print a picture easily. - Pressing the printer( ) button : Currently displayed image will be printed with the printer’s default setting.
《 58 》 PictBridge : Print Setting PictBridge : Picture Selection ■ Custom Set : You can select the Paper Size, Print Format, Paper Type, Print Quality, Date Print, and File Name Print menus for printed pictures. 1. Use the LEFT and RIGHT buttons to select the [CUSTOM SET] menu tab.
《 59 》 PictBridge : Print Setting PictBridge : Printing ■ Printing Pictures 1. Use the LEFT and RIGHT buttons to select the [PRINT] menu tab. 2. Use the UP and DOWN buttons to select the desired sub menu value, and then press the OK button. [Standard] : Print the pictures stored in the memory card in set numbers.
《 60 》 PictBridge : DPOF Printing PictBridge : Reset 1. Use the LEFT and RIGHT buttons to select the [RESET] menu tab. 2. Use the UP and DOWN buttons to select the desired sub menu value, and then press the OK button. If [No] is selected : Settings will not be reset.
《 61 》 Setup menu Menu tab Main menu Sub menu Secondary menu Page Series - Reset - Power Off Off, 1, 3, 5, 10min - p.62 No - Yes - 07/01/01 13:00 - yy/mm/dd - mm/dd/yy - dd/mm/yy - Off - Cape Verd.
《 62 》 Setup menu ● Assigning File Names 1. In any mode with the exception of Voice Recording mode, press the MENU button. 2. Press the LEFT/ RIGHT button and select the [SETUP] menu tab. 3. Select the [File ] menu by pressing the UP/ DOWN button and press the RIGHT button.
《 63 》 Setup menu [ Formatting a memory ] ■ This is used for formatting the memory. If you run [Format] on the memory, all images, including the protected images, will be deleted. Be sure to download important images to your PC before formatting the memory.
《 64 》 Setup menu [ Imprinting the recording date ] ■ There is an option to include DATE / TIME on still images. [ World Time ] ■ This menu enables you to display the local date and time on the LCD monitor. ● Sub menus [Off] : The DATE & TIME will not be imprinted on the image file.
《 65 》 Setup menu [ Connecting an External Device (USB) ] ■ You can select an external device to which you want to connect the camera using the USB cable. ● Sub menus - [Computer] : Select this if you want to connect the camera to your PC. Refer to page 77 for instructions on how to connect the camera to your PC.
《 66 》 Setup menu - NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico. - PAL : Australia, Austria, Belgium, China, Denmark, Finland, Germany, U.K., Holland, Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain, Sweden, Switzerland, Thailand, Norway.
《 67 》 Start up sound Shutter sound ■ You can select the sound that is activated whenever the camera is turned on. ● Start up sound : [Off], [Sound 1], [Sound 2], [Sound 3] - If the start up image is set to [Off], the start up sound will not activate, even though you may have set these to on.
《 68 》 Important notes ■ Extremes in temperature may cause problems. - If the camera is transferred from a cold to a warm and humid environment, condensation can form on the delicate electronic circuitry. If this occurs, turn the camera off and wait for at least 1 hour until all moisture is dispersed.
《 69 》 W arning indicator ■ There are several warnings that may appear on the LCD display Memory Error! ㆍ Memory card error → Turn off the camera power and turn it on again → Insert the memory card again → Insert and format the memory card (p.
《 70 》 Battery power quickly drains ㆍ The Camera is being used in low temperatures → Keep the camera in warm conditions (i.e. inside a coat or jacket) and only remove it in order to take image.
《 71 》 Before contacting a service centre Colour of image is different to the original scene ㆍ White balance or effect setting is incorrect → Select appropriate White balance and effect Images.
《 72 》 Specifications ■ Exposure - Control : Program AE, Shutter Priority AE, Aperture Priority AE or Manual Exposure - Metering : Multi, Spot - Compensation : ± 2EV (1/2EV steps) - ISO Equival.
《 73 》 Specifications - Movie Clip : · With Audio (recording time : memory capacity dependent) · Size: 800x592, 720x480, 640x480, 320x240 · Frame rate : 30 fps, 20 fps, 15 fps (15/20 fps for 800x592, 720x480) · Stabilizer · Optical Zoom : up to 5.
《 74 》 Software Notes About the software System Requirements Please ensure that you read the instruction manual carefully before use. • The attached software is a camera driver and image editing software tool for Windows. • Under no circumstances should all or part of either the software or the user manual be reproduced.
《 75 》 Setting up the application software ■ To use this camera with a PC, install the application software first. After this has been done, the stored images in the camera can be moved to the PC and can be edited by an image editing program. ■ You can visit the Samsung web-site through the internet.
《 76 》 Setting up the application software 4. Turn the camera power on. The [Found New Hardware Wizard] will open and the computer will recognise the camera. ※ If your OS is Windows XP, an image viewer program will open. If the download window of Digmax Master opens after starting Digimax Master, the camera driver was set up successfully.
《 77 》 Starting PC mode ■ Connecting the camera to a PC ■ Disconnecting the camera and PC : Refer to page 79 (Removing the removable disk). ※ If you selected [Printer] in Step 4, when you connect the camera to your printer, the [Connecting Printer] message will display and the connection will not be established.
《 78 》 ■ Downloading stored images You can download the still images stored on the camera to your PC's hard disk and print them or use a photo editing software to edit them.
《 79 》 Removing the removable disk 6. A [Unplug or Eject Hardware] window will open. Click the [Close] button and the removable disk will be removed safely. 7. Unplug the USB cable. ■ Windows 98/98SE 1. Check whether the camera and PC are transferring a file.
《 80 》 ■ To remove the USB driver, refer to the process shown below. 1. Connect the camera to your PC and turn them on. 2. Check whether the Removable Disk is on the [My Computer]. 3. Remove the [Samsung Digital Camera] on the Device manager. 6.
《 81 》 Digimax Master 4. Select a destination and make a folder to save downloaded images and folders. - Folder names can be made in order of date and images will be downloaded. - Folder name will be made as you want and images will be downloaded.
《 82 》 ● Image edit : You can edit the still image. ① ② ③ ④ - Image edit functions are listed below. ① Edit menu : You can select the following menus. [Tools] : You can resize or crop the selected image. See the [Help] menu. [Adjust] : You can modify image quality.
《 83 》 FA Q FA Q Digimax Master ■ Please check the following if the USB connection malfunctions. Case 1 USB cable is not connected or it is not the supplied USB cable. → Connect the supplied USB cable. Case 2 The camera is not recognised by your PC.
《 84 》 FA Q ■ When the movie clip doesn’t play back on the PC ※ When the movie clip recorded by the camera doesn’t play back on the PC, the causes are mostly due to the codec installed on the PC. ● When codec for play back the movie clip isn’t installed → Install the codec as listed below.
《 85 》 FA Q Correct Disposal of This Product Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with sepa.
《 86 》 FCC notice MEMO ■ ■ NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference in a residential installation.
《 87 》 MEMO MEMO.
《 88 》 MEMO MEMO.
デバイスSony DIGIMAX S850の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Sony DIGIMAX S850をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSony DIGIMAX S850の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sony DIGIMAX S850の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sony DIGIMAX S850で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sony DIGIMAX S850を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSony DIGIMAX S850の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sony DIGIMAX S850に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSony DIGIMAX S850デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。