SonyメーカーEVI-D100の使用説明書/サービス説明書
ページ先へ移動 of 48
2001 Sony Corporation Color Video Camera EVI-D100/D100P A-AYT-100- 11 (1) Technical Manual.
2 T able of Contents Features ..................................................................... 3 Connection ................................................................. 4 Locations of Controls ............................................... 5 Basic Functions .
3 Overview Features • The CCD features 380,000 effective picture elements for the EVI-D100 and 440,000 for the EVI-D100P, which enables high-resolution shooting. • In addition to high-speed pan/tilt action, improvement of the noise reduction mechanism lets you use the Color Video Camera for a variety of purposes.
4 Connection Connection 1) When the camera is connected to a computer with a VISCA cable (RS-232C, cross type), you can operate the camera with the computer.
5 Locations of Controls Locations of Contr ols Main Unit 3 4 1 2 58 9 q; 6 7 qa 1 POWER lamp 2 STANDBY lamp 3 Lens 4 Sensor for the remote commander 5 BACKUP switch 6 VIDEO jack 7 S VIDEO jack 8 IR SE.
6 Locations of Controls 1 CAMERA SELECT buttons 2 FOCUS buttons AUTO button FAR button NEAR button MANUAL button 3 DATA SCREEN button 4 PAN-TILT button Arrow buttons HOME button 5 L/R DIRECTION SET bu.
7 Basic Functions Basic Functions Overview of Functions Zoom The EVI-D100/P uses an 10 × optical zoom lens. And its digital zoom function allows you to zoom up to 40 × . • Optical 10 × , f = 3.1 to 31 mm (F 1.8 to F 2.9) The horizontal angle of view is approximately 65 degrees (wide end) to 6.
8 Basic Functions 1) The One Push White Balance mode is a fixed white balance mode that may be automatically readjusted only at the request of the user (One Push Trigger), assuming that a white subject, in correct lighting conditions, and occupying more than 1/2 of the image, is submitted to the camera.
9 Basic Functions AE – Gain priority The gain can be set freely by the user to 8 steps between – 3 dB and +18 dB. The shutter speed is fixed and the iris is set automatically, according to the brightness of the subject. AE – Manual The shutter speed (20 steps), iris (18 steps) and gain (8 steps) can be set freely by the user.
10 Basic Functions Data Step Setting value 0E 7 10.5 dB 0D 6 9 dB 0C 5 7.5 dB 0B 4 6 dB 0A 3 4.5 dB 09 2 3 dB 08 1 1.5 dB 07 0 0 dB 06 – 1 – 1.5 dB 05 – 2 – 3 dB 04 – 3 – 4.5 dB 03 – 4 – 6 dB 02 – 5 – 7.5 dB 01 – 6 – 9 dB 00 – 7 – 10.
11 Basic Functions Initial V alues and Bac kup Initial values of functions of the EVI-D100/P are indicated in the “ Initial values ” column. An a in the “ Backed up/Not backed up ” column indicates that the setting is memorized in the camera. An × indicates that it is not.
12 Basic Functions Category Mode/Position Pan/Tilt Pan/Tilt Position Zoom Zoom Position Digital Zoom On/Off Focus Focus Mode Auto/Manual Focus Position WB WB Mode R/B Gain AE AE Mode Slow Shutter Auto.
13 Basic Functions Mode Condition Address Set aa a a IF_Clear aa a a Power On a ×× a Power Off a ×× a AutoPowerOff setting ×× × a IR_Receive On/Off aa × a IR_ReceiveReturn On/Off aa × a CAM_DeviceTypeInq/VersionInq aa a a CAM_PowerInq/Pantilt Mode Inq aa a a BlockInquiry aa a a InquiryCommand (etc.
14 Basic Functions Focus Far/Near/Stop VISCA ×××× × aa ×× RC ×××× × × a ×× Focus Direct ××× a × aaa × Focus Mode Auto/Manual ×××× aa a a × One Push AF Trigger ×××× × ××.
15 Basic Functions Mode Condition 5 (A uto Exposure) AE mode setting Full Auto/Manual/ Shutter Pri/Iris Pri/ ××××× a aaaaaaaa Gain Pri/ Shutter Auto/ Iris Auto/Gain Auto AE mode setting Bright ×.
16 Basic Functions Mode Condition 6 (Effect Setting, etc.) Aperture Reset/Up/Down/Direct ×××× × aa Wide Off/Cinema/16:9Full ×××× aa a LR_Reverse On/Off ×××× aa a Freeze On/Off ××× a × a × Picture Effect Off/Pastel/NegArt/Sepia/B&W/ ×××× aa a Solarize/Mosaic/Slim/Stretch Digital Effect Off/Still/Flash/Lumi.
17 Basic Functions Mode Condition 7 (P an/Tilt, Memory Function) Common Common VISCA RC VISCA VISCA VISCA RC VISCA RC VISCA RC Pan-tiltDrive Up/Down/Left/ VISCA ××× aaaaa ×××××××× a Right/U.
18 Command List Command List VISCA 1) /RS-232C Commands Use of RS-232C control software which has been developed based upon this command list may cause malfunction or damage to hardware and software. Sony Corporation is not liable for any such damage.
19 Command List VISCA Comm unication Specifications VISCA packet structure The basic unit of VISCA communication is called a packet (Fig. 2). The first byte of the packet is called the header and comprises the sender ’ s and receiver ’ s addresses.
20 Command List Responses for commands and inquiries ● ACK message Returned by the EVI-D100/P when it receives a command. No ACK message is returned for inquiries. ● Completion message Returned by the EVI-D100/P when execution of commands or inquiries is completed.
21 Command List VISCA Device Setting Command Before starting control of the EVI-D100/P, be sure to send the Address command and the IF_Clear command using the broadcast function. For VISCA network administration ● Address Sets an address of a peripheral device.
22 Command List • EVI-D100/P Windows D-sub 25 pin Pin assignment 8 7 6 5 4 3 2 1 IR OUT outputs the signals of the Remote Commander at 0 to 5 V when the IR OUT switch is set to ON. When the switch is set to OFF, signals input to the VISCA IN jack are output through the VISCA OUT jack.
23 Command List Command Command Message Reply Message General Command 81 01 04 38 02 FF 90 41 FF (ACK)+90 51 FF (Example) (Completion) 90 4 2 FF 90 5 2 FF 81 01 04 38 FF 90 60 02 FF (Syntax Error) (Ex.
24 Command List VISCA Camera-Issued Messages ACK/Completion Messages Command Messages ACK z0 4y FF (y:Socket No.) Completion z0 5y FF (y:Socket No.) Comments Returned when the command is accepted.
25 Command List EVI-D100/P Commands EVI-D100/P Command List (1/4) Command Set Command Command Packet Comments AddressSet Broadcast 88 30 01 FF IF_Clear Broadcast 88 01 00 01 FF CommandCancel 8x 2p FF p: Socket No.
26 Command List EVI-D100/P Command List (2/4) Command Set Command Command Packet Comments CAM_BGain Reset 8x 01 04 04 00 FF Manual control of B Gain Up 8x 01 04 04 02 FF Down 8x 01 04 04 03 FF Direct .
27 Command List EVI-D100/P Command List (3/4) Command Set Command Command Packet Comments CAM_Aperture Reset 8x 01 04 02 00 FF Aperture control Up 8x 01 04 02 02 FF Down 8x 01 04 02 03 FF Direct 8x 01.
28 Command List EVI-D100/P Command List (4/4) Command Set Command Command Packet Comments Pan-tiltDrive Up 8x 01 06 01 VV WW 03 01 FF VV: Pan speed 01 to 18 Down 8x 01 06 01 VV WW 03 02 FF WW: Tilt Sp.
29 Command List EVI-D100/P Inquiry Command List (1/2) InquiryCommand CommandPacket InquiryPacket Comments CAM_PowerInq 8x 09 04 00 FF y0 50 02 FF On y0 50 03 FF Off (Standby) CAM_AutoPowerOffInq 8x 09.
30 Command List EVI-D100/P Inquiry Command List (2/2) InquiryCommand CommandPacket InquiryPacket Comments CAM_ExpCompModeInq 8x 09 04 3E FF y0 50 02 FF On y0 50 03 FF Off CAM_ExpCompPosInq 8x 09 04 4E.
31 Command List Byte Bit Comments 7 6 5 0 4 y0 3 2 1 0 7 6 5 1 4 50 3 2 1 0 70 60 50 2 40 3 2 Zoom Position (HH) 1 0 70 60 50 3 40 3 2 Zoom Position (HL) 1 0 70 60 50 4 40 3 2 Zoom Position (LH) 1 0 7.
32 Command List 70 60 50 12 40 30 20 10 00 70 60 50 13 40 30 2 AF Sens 1:High 0:Low 1 Digital Zoom 1:On 0:Off 0 Focus Mode 1:Auto 0:Manual 70 60 50 14 40 30 20 1 Focus Command 1:Executing 0: Stopped 0 Zoom Command 1:Executing 0: Stopped 7 6 5 15 4 FF 3 2 1 0 Byte Bit Comments Lens control system inquiry commands (2/2) .
33 Command List Byte Bit Comments 7 6 5 0 4 y0 3 2 1 0 7 6 5 1 4 50 3 2 1 0 70 60 50 2 40 3 2 R Gain (H) 1 0 70 60 50 3 40 3 2 R Gain (L) 1 0 70 60 50 4 40 3 2 B Gain (H) 1 0 70 60 50 5 40 3 2 B Gain .
34 Command List 70 60 50 12 40 30 2 1 Gain Position 0 70 60 50 13 4 3 2 Bright Position 1 0 70 60 50 14 40 3 2 Exposure Comp. Position 1 0 7 6 5 15 4 FF 3 2 1 0 Byte Bit Comments Camera control system inquiry commands (2/2) .
35 Command List Byte Bit Comments 7 6 5 0 4 y0 3 2 1 0 7 6 5 1 4 50 3 2 1 0 70 60 50 2 40 30 20 10 0 Power 1:On 0:Off 70 60 50 3 40 3 Freeze 1:On 0:Off 2 LR Reverse 1:On 0:Off 1 Wide 16:9 Full 1:On 0:Off 0 Wide Cinema 1:On 0:Off 70 60 50 4 40 30 2 Data screen 1:On, 0:Off 10 00 70 60 50 5 40 30 2 Picture Effect Mode 1 0:Off 1:Pastel 2:Neg.
36 Command List 70 60 50 12 40 30 20 10 0 System 1:PAL 0:NTSC 70 60 50 13 40 30 20 10 00 70 60 50 14 40 30 20 10 00 7 6 5 15 4 FF 3 2 1 0 Byte Bit Comments Other inquiry commands (2/2) .
37 Command List VISCA Command Setting V alues Exposure control NTSC PAL Shutter Speed 13 10000 10000 12 6000 6000 11 4000 3500 10 3000 2500 0F 2000 1750 0E 1500 1250 0D 1000 1000 0C 725 600 0B 500 425 0A 350 300 09 250 215 08 180 150 07 125 120 06 100 100 05 90 75 04 60 50 03 30 25 02 15 12 01 8 6 00 4 3 Iris 11 F1.
38 Command List 1) Values when an object is 2 m away from the front surface of the lens Zoom values Focal length 1) (mm) 0000h 3.1 0E6Dh 4.65 188Eh 6.2 2507h 9.
39 Command List Lens control PQ R S 0 ––– – ––– 0 ––– ––– 1 Pan has reached the left endpoint. 0 ––– – ––– 0 ––– –– 1 – Pan has reached the right endpoint. 0 ––– – ––– 0 ––– – 1 –– Tilt has reached the top endpoint.
40 Command List D30/D31 Mode Overview The D30/D31 mode allows you to control the EVI- D100/P using VISCA commands for the EVI-D30/ D31. Most of the VISCA commands for the EVI-D100/P correspond to one for the EVI-D30/D31. However, some of the VISCA commands for the EVI-D100/P are different from those for the EVI-D30/D31 in definitions of parameters.
41 Command List When accepting commands Type of command D30/D31 mode on D30/D31 mode off Common to both the D30/D31 and Common parameters Accepts as is D100/P Different parameters Translates the D30/D.
42 Command List The EVI-D100/P translates the parameters to let the camera obtain the same zoom position that is defined by the D30/D31 ’ s parameter.
43 Command List EVI-D30 EVI-D100 Parameters Shutter speed Parameters Shutter speed 0000h (1/60) b 0004h (1/60) 0001h (1/60) b 0004h (1/60) 0002h (1/75) b 0004h (1/60) 0003h (1/90) b 0005h (1/90) 0004h.
44 Command List Speed (deg/sec) Parameters D100/P D30/D31 01h 2.0 b 3.3 02h 2.4 b 6.7 03h 3.0 b 10.0 04h 3.7 b 13.3 05h 4.7 b 16.7 06h 6.1 b 20.0 07h 7.4 b 23.3 08h 9.1 b 26.7 09h 11 b 30.0 0Ah 14 b 33.3 0Bh 18 b 36.7 0Ch 22 b 40.0 0Dh 27 b 43.3 0Eh 34 b 46.
45 Command List D30/D31 D100/P Pan/Tilt Pan Tilt FC90h b FA60h – …… – FED4h b FE15h FE98h …… … FFFDh b FFFBh FFFCh FFFEh b FFFDh FFFEh FFFFh b FFFEh FFFFh 0000h b 0000h 0000h 0001h b 000.
46 Specifications Specifications S video output 4 pin mini DIN (1) Input/output control terminals RS-232C (input: 1, output: 1), 8 pin mini DIN, 9600 bps Data: 8 bit Stop bit: 1 Power terminal JEITA type4 General Input voltage DC 12 V (DC 10.8 to 13 V) Current consumption 1.
47 Specifications 1.7 ( 1 / 16 ) 87.5 (3 7 / 16 ) 113 (4 7 / 16 ) 116.5 (4 19 / 32 ) 113 (4 7 / 16 ) 136.5 (5 3 / 8 ) 128 (5 1 / 32 ) 120 (4 23 / 32 ) 132 (5 3 / 16 ) φ 4.
48 Specifications Software Use of the demonstration software developed by Sony Corporation or use of the software with customer developed application software may damage hardware, the application program or the camera. Sony Corporation is not liable for any damages under these conditions.
デバイスSony EVI-D100の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Sony EVI-D100をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSony EVI-D100の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sony EVI-D100の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sony EVI-D100で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sony EVI-D100を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSony EVI-D100の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sony EVI-D100に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSony EVI-D100デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
