SonyメーカーKDF-E42A12Uの使用説明書/サービス説明書
ページ先へ移動 of 46
KDF-E50A12U KDF-E42A12U © 2005 Sony Corporation Printed in Spain LCD Pr ojection TV 2-632-913- 43 (1) KDF-E50A12U KDF-E42A12U 2-632-913- 43 (1) Operating Instructions Before operating the TV, please read the “ Safety Information” section of this manual.
2 NOTICE FOR CUSTOMERS A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug suppl ied need to be replaced, a 5 AMP fuse approved by ASTA or BSI to BS 1362 (i.e., marked with or ) must be used.
3 Table of Contents Safety information ....................................... 4 Precautions ................................................. 7 Overview of the remote ............................... 8 Overview of the TV buttons and indicators .......
4 Safety information Mains lead • Unplug the mains lead when moving the TV set. Do not move the TV set with the mains lead plugged in. It may damage the mains lead and result in fire or electric shock. • If you damage the mains lead, it may result in fire or electric shock.
5 • When installing the TV set on the wall, leave at least 10 cm space from the bottom of the TV set. • Never install the TV set as follows: Ventilation holes Do not insert anything in the ventilation holes. If metal or liquid is inserted in these holes, it may result in fire or electric shock.
6 Damage requiring service If the surface of the TV set cr acks, do not touch it until you have unplugged the mains lead. Otherwise electric shock may result. Servicing Do not open the cabinet. Entrust the TV set to qualified service personnel only. Small accessories removal and fittable Keep accessories out of children’s reach.
7 Precautions LCD Panel • Although the LCD panel is made with high-precision technology and 99.99% or more of the pixels are effective, black dots may appear or bright points of light (red, blue, or green) may appear constantly on the LCD panel. This is a structural property of the LCD panel and is not a malfunction.
8 Overview of the remote 1 TV " / 1 – TV standby Switches off the TV temporarily. The 1 (standby) indicator on the front of the TV lights up. Press again to switch on the TV from the standby mode.
9 Overview of the TV buttons and indicators 1 (page 19) 2 / – Input select (page 15) • In TV mode: Selects the input source from equipment connected to the TV sockets. • In TV menu: OK 3 2 +/-/ < / , • Increases (+) or decreases (-) the volume.
10 1: Checking the accessories Remote RM-ED002 (1) Size AA batteries (R6 type) (2) Coaxial cable (1) 2: Inserting batteries into the remote Notes • Observe the correct polarity when inserting batteries. • Dispose of batteries in an environmentally friendly way.
11 Getting Started 3: Connecting an aerial/VCR A 1 Rear of the TV Coaxial cable (not supplied) Coaxial cable (supplied) IN OUT R/D/D/D (VARIABLE) L/G/S/I Y P R /C R P B /C B L/G/ S/I R/D/ D/D (SmartLi.
12 1 Connect your aerial to the socket on the rear of the TV. If connecting to an aerial only ( A ) Connect the socket to the socket on the rear of the TV with the supplied coaxial cable. Go to step 3. If connecting to a VCR with an aerial ( B ) Go to step 2.
13 Getting Started 6: Auto-tuning the TV When you switch on the TV for the first time, the message confirming the TV start auto-tuning appears on the screen. You must tune the TV to receive channels (TV broadcasts). Do the following to search and store all available channels.
14 Watching TV 1 Press 1 on the TV (Front side) to switch on the TV. When the TV is in standby mode (the 1 (standby) indicator on the front of the TV is red), press TV " / 1 on the remote to switch on the TV. 2 Press DIGITAL to switch to digital mode or to switch to analogue mode.
15 Watching TV To access Digital Text Many broadcasters provide a Digital Text service. Digital Text offers graphically rich contents, compared to Analogue Text. Select a digital channel which provides Digital Text, then press / . When a broadcaster provides a dedicated Digital Text channel, select this channel to access Digital Text.
16 Checking the Digital Electronic Programme Guide (EPG) 001 002 003 006 007 008 009 014 024 029 030 040 BBC ONE W ales BBC 2W ITV 1 W ales ITV 2 BBC THREE Channel 4 Teletext E4 price-drop.
17 Watching TV Set a programme to be displayed automatically on the screen when it starts – Reminder 1 Press m / M / < / , to select the future programme you want to display. 2 Press OK. 3 Press m / M to select “Reminder”. 4 Press OK to automatically di splay the selected programme when the programme starts.
18 Using the Favourite list To Do this Create your Favourite list for the first time A message appears asking if you want to add channels to the Favourite list when you press for the first time. 1 Press OK to select “Yes”. 2 Press m / M to select the channel yo u want to add, then press OK.
19 Using the Menu Viewing pictures from connected equipment Switch on the connected equipment, then perform one of the following operation. For equipment connected to the scart sockets using a fully-wired 21-pin scart lead Start playback on th e connected equipment.
20 Overview of the menus The following options are av ailable in each menu. For details on navigating through menus, see (page 19). Also, see page in parentheses for details of each menu.
21 Using the Menu Picture Adjustment menu Selects the picture mode. 1 Press OK to select “Picture Mode”. 2 Press m / M to select one of the following picture modes, then press OK. • Vivid: For big lighted spaces. • Standard: Optimal picture for home use.
22 Reset all the picture settings to the factory settings. 1 Press OK to select “Reset”. 2 Press m / M to select “OK,” then press OK. Reduces the picture noise (snowy pict ure) in a weak broadcast signal. 1 Press OK to select “Noise Reduction”.
23 Using the Menu Sound Adjustment menu 1 Press OK to select “Sound Effect”. 2 Press m / M to select one of the following sound effects, then press OK. • Natural: Enhances clarity, detail, and sound presence by using “BBE High definition Sound System *1 .
24 Selects the sound from the speaker fo r a stereo or bilingual broadcast. 1 Press OK to select “Dual Sound”. 2 Press m / M to select one of the following, then press OK.
25 Using the Menu Screen menu Automatically changes the screen format according to the broadcast signal. 1 Press OK to select “Auto Format”. 2 Press m / M to select “On,” then press OK. Tips • Even if you have selected “On” or “Off” in “Aut o Format”, you can always modify the format of the screen by pressing repeatedly.
26 Features menu Sets a signal to be output th rough the socket labelled / 2 on the rear of the TV. If you connect a VCR to the / 2 socket, yo u can then record from the equipment connected to other sockets of the TV. 1 Press OK to select “AV2 Output”.
27 Using the Menu Customizes the TV screen as a PC monitor. 1 Press OK to select “PC Adjustment”. 2 Press m / M to select one of the following, then press OK. • Phase: Adjust the screen when a part of a displayed text or image is not clear. • Pitch: Enlarges or shrinkes the screen size horizontally.
28 Timer menu Sets a period of time after which the TV auto matically switches itself into the standby mode. 1 Press OK to select “Sleep Timer”. 2 Press m / M to select the desired time period (“30min”/“60min”/“90min”/ “120min”), then press OK.
29 Using the Menu Set Up menu Starts the “first time opera tion menu” to tune in all the available digital and analogue channels. Usually you do not need to do th is operation because the channels are already tuned when the TV was first installed ((page 13)).
30 Assigns a channel name of your choice up to five letters or numbers. The name will be displayed briefly on the screen when the channe l is selected. (Names for channels are usually taken automatically from Analogue Text (if available).) 1 Press OK to select “Programme Labels”.
31 Using the Menu Option Description Programme Presets programme channels manually. 1 Press M / m to select “Programme”, then press OK. 2 Press M / m to select the progra mme number you want to manually tune (if tuning a VCR, select channel 0), then press < .
32 Displays the “Digital Set Up” menu. You can ch ange/set the digital settings using this menu. 1 Press OK to select “Digital Set Up”. 2 Press m / M to select the desired icon below, then press OK. 3 Press m / M to select one of the following options, then press OK.
33 Using the Menu Programme List Edit Removes any unwanted digital channels stored on the TV, and changes the order of the digital channels stored on the TV.
34 Parental Lock Sets an age restriction for programmes. Any programme that exceeds the age restriction can only be watched after a PIN Code is entered correctly. 1 Press the number buttons to enter your existing PIN code. If you have not previously set a PIN, a message appears to inform you.
35 Using Optional Equipment R/D/ D/D MONO L/G/ S/I Connecting optional equipment Using Optional Equipment You can connect a wide range of optional equipmen t to your TV.
36 Connecting to the rear of the TV R/D/D/D (VARIABLE) L/G/S/I Y P R /C R P B /C B L/G/ S/I R/D/ D/D (SmartLink) / / 6 R L / 6 R L MODEM 5V 500 mA Decoder VCR Decoder Hi-Fi PlayStation 2 DVD DVD playe.
37 Using Optional Equipment To connect Do this “PlayStation 2”, DVD player or decoder D Connect to the scart socket / 1. When you connect the decoder, the scrambled signal from the TV tuner is output to the decoder, then the unscrambled signal is output from the decoder.
38 Optimum Viewing Area For the best picture quality, try to positi on the TV set so that you can view the sc reen from within the areas shown below. Horizontal viewing area Vertical viewing area Additional Information 65 ° 65 ° KDF-E42A12U: 1.8 m and more KDF-E50A12U: 2.
39 Additional Information Replacing the lamp When the lamp becomes dark or the picture colour is not normal or the lamp indicator on the TV set flashes, replace with a new lamp. Tips • Only use the lamp XL-2400 for replacement. If you us e another lamp, it may cause damage to the TV set.
40 Additional Information 6 Pull out the lamp. Hook a finger through the loop of the lamp handle and pu ll the handle upwards. Then pull the lamp straight out. Tips • The lamp is very hot immediately after use. Never t ouch the glass portion of the lamp or the surrounding parts.
41 Additional Information 9 Put the outside lamp cover back in its place. Tips • Consult your Sony dealer for a Sony XL-2400 replacement lamp. • Take great care when replacing the lamp or plugging in/unplugging the connecting cords. Rough handling may cause the TV to fall, damaging the TV, the TV stand and the floor.
42 Specifications Display Unit Power Requirements: 220–240 V AC, 50 Hz Screen Size: KDF-E50A12U: 50 inches KDF-E42A12U: 42 inches Display Resolution (horizontal x vertical): 1280 dots x 720 lines Power Consumption: 180 W Standby Power Consumption: 1 W or less Dimensions (w × h × d): KDF-E50A12U: Approx.
43 Additional Information Optional Accessories • TV stand SU-RG11S (KDF-E42A12U) • TV stand SU-RG11M (KDF-E50A12U) • Lamp: XL-2400 Design and specifications are subject to change without notice. PC Input Specifications PC Input Timing Input signal frequency: Horizontal: 31,4 - 48,4 KHz.
44 Troubleshooting Check whether the 1 (standby) indicator is flashing in red. When it is flashing The self-diagnosis function is activated. 1 Measure how long the 1 (standby) indicator flashes and stops flashing. For example, the indicator flashes for two seconds, stops flashing for one second, and flashes for two seconds.
No colour on programmes • Select “Reset” in the “Picture Adjust ment” menu to return to the factory settings (page 22). No colour or irregular colour when viewing a signal from the Y, PB/CB, PR/CR jacks of 3 • Check the connection of the Y, P B /C B , P R /C R jacks of 3.
46 Index Numerics 0-9 buttons 8 14:9 15 4:3 15 A Accessories supplied 10 Aerial, connecting 11 AFT 31 Analogue mode (<S0010>) button 8 ATT 32 Audio Filter 31 Audio Language 33 Audio Type 33 Auto.
デバイスSony KDF-E42A12Uの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Sony KDF-E42A12Uをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSony KDF-E42A12Uの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sony KDF-E42A12Uの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sony KDF-E42A12Uで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sony KDF-E42A12Uを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSony KDF-E42A12Uの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sony KDF-E42A12Uに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSony KDF-E42A12Uデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
