SonyメーカーKLV 21SR2の使用説明書/サービス説明書
ページ先へ移動 of 60
© 2003 Sony Corporation 4-099-415- 11 (3) LCD Color TV Operating Instructions Before operating the unit, please r ead this manual thor oughly and retain it for futur e refer ence.
2 W ARNING To reduce the risk of fire or shock hazard, do not expose the TV to rain or moisture. This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient m agnitude to constitute a risk of electric shock to persons.
3 Important Safety Instructions 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with dry cloth. 7 Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
4.
5 Table of Contents Ta b le of Contents Installing and Connecting the TV Unpacking .......................................................... 6 Inserting Batteries into the Remote Control ... 6 Connector Types .........................................
6 Installing and Connecting the TV Installing and Connecting the TV Unpac king When you unpack this unit, make sure it includes the following: Operating Instructions Warranty Card Product Registration.
7 Installing and Connecting the TV Identifying Fr ont and Rear Connector s TV front panel 1 POWER button (page 20) 2 Headphones jack Connects to your headphones. If your headphones do not match the jack, use a suitable plug adaptor (not supplied). Rear of TV 3 VHF/UHF (pages 8, 12 - 14) Connects to your VHF/UHF antenna or cable.
8 Installing and Connecting the TV 75-ohm coaxial cable (supplied) Rear of TV VHF/UHF Basic Connections (Connecting Cab le TV or an Antenna) When connecting an antenna or cables, remove the rear cover of the TV beforehand.
9 Installing and Connecting the TV Connecting the P ower Cor d Complete other connections prior to connecting the power cord. 1 Connect the power cord to the AC IN connector of the TV.
10 Installing and Connecting the TV Bundling cor ds and cables You can organize the cables in the back of the TV. 1 Bundle the cables and secure them with the clips on both sides of the TV. Note It may not be possible to fasten with clips if cables are too thick.
11 Installing and Connecting the TV Carrying the TV When carrying the TV, hold it as shown in the diagram below. Do not hold only by the rear cover. As the rear cover is designed to come off, doing so may cause you to drop the TV, resulting in damage to the TV or cause injury.
12 Installing and Connecting the TV Connecting a VCR and Cab le TV Use this hookup if: •Y ou have cable TV that does not require a cable box. Disconnect all power sources before making any connections. 1 Connect the CATV cable to the VCR’s IN jack.
13 Installing and Connecting the TV Connecting a Satellite Receiver Disconnect all power sources before making any connections. 1 Connect the satellite antenna cable to the satellite receiver’s SATELLITE IN jack.
14 Installing and Connecting the TV Rear of TV Connecting a Satellite Receiver with a VCR Disconnect all power sources before making any connections. 1 Connect the satellite antenna cable to the satellite receiver’s SATELLITE IN jack. 2 Connect the CATV cable to the VCR’s VHF/UHF IN jack.
15 Installing and Connecting the TV When using your audio system speakers Set “Speaker” to “Off” in the (Audio) menu. The TV’s sound is not output from the AUDIO OUT jacks when the TV’s speaker is set to on.
16 Installing and Connecting the TV Connecting a D VD Play er with Component Video Connector s This is the preferred hookup to use if: •Y our DVD player has component (Y, B-Y, R-Y) jacks.
17 Installing and Connecting the TV Connecting a D VD Play er with A/V Connector s Use this hookup if: •Y our DVD player does not have component (Y, P B , P R ) jacks. Tip If your DVD player has component video output connectors, for best picture quality, use the connection described on page 16.
18 Installing and Connecting the TV Connecting a Digital Satellite Receiver Disconnect all power sources before making any connections. 1 Using a component video cable, connect the Digital Satellite Receiver’s Y, P B and P R jacks to the Y, P B and P R jacks on the TV.
19 Installing and Connecting the TV Connecting a Digital TV Receiver Disconnect all power sources before making any connections. 1 Using a component video cable, connect the Digital TV receiver’s Y, P B and P R jacks to the Y, P B and P R jacks on the TV.
20 Installing and Connecting the TV Setting the Channels After you finish connecting your TV, you can run Auto Program to set up your channels. The Auto Program screen appears when you turn your TV on for the first time after installing it. To skip channels, see page 21.
21 Installing and Connecting the TV To lock in a TV channel If you have connected a cable box or satellite receiver to your TV, and do not intend to connect any other audio or video equipment, it is recommended that you lock in a TV channel. Doing so will ensure no accidental channel switch when using your TV.
22 Installing and Connecting the TV 1 Press MENU. 2 Press V / v to select (Setup), then press . 3 Press V / v to select “Language,” then press . 4 Press V / v to select your preferred language, then press .
23 Watching the TV W atching the TV MUTING DISPLAY SYSTEM OFF 1 2 W atching the TV 2 3 JUMP 1 Press POWER on the remote control. Tip When the 1/ (Standby/Sleep) indicator goes off, press I on the TV. 2 Select the desired channel using the 0-9 and ENT (enter) buttons.
24 Watching the TV O ff CC 1 CC2 Te x t 1 Te x t2 Te x t3 Te x t 4 W atc hing with c losed caption You can display Caption Vision if the broadcaster offers this service.
25 Watching the TV Press PICTURE MODE repeatedly until the desired mode appears. Each time you press the button, the Picture Mode changes as follows: Picture Mode Description Vivid Standard Pro Tip You can adjust the picture quality options, such as “Picture,” “Brightness,” and “Color,” for each Picture Mode (See pages 37, 38).
26 Watching the TV Tip You can adjust other sound quality options. For details, see “Adjusting the Sound Quality” on page 39. 1 Press MENU. 2 Press V / v to select (Audio), then press . 3 Press V / v to select “Effect,” then press . 4 Press V / v to select “SRS WOW,” then press .
27 Watching the TV 1 Press MENU. , Video Exit: Set : Select : Return Mode: Vivid Picture: 50 Brightness: 50 Color: 25 Hue: 0 Sharpness: 3 Backlight: 5 Color T emp.: Cool CineMotion: Off Dynamic Picture: On TV 2 Press V / v to select (Setup), then press .
28 Watching the TV Setting the Video Inputs You can enjoy images (and sound) from optional video equipment connected to this unit by selecting the appropriate input. For details on connection, see pages 8 through 19. 1 1 Press TV/VIDEO repeatedly until the desired video input appears.
29 Watching the TV Using the Video Label Feature You can make settings for each video input by choosing the label displayed on the screen. 1 Press MENU. 2 Press V / v to select (Setup), then press . 3 Press V / v to select “Video Label,” then press .
30 Watching the TV Operating Video Equipment with Y our TV Remote Contr ol Pr ogramming the remote contr ol 2 3 4 1 5 The remote control is preset to operate Sony video equipment.
31 Watching the TV Manufacturer Code Pentax 305, 304 Philco 308, 309 Philips 308, 309, 310 Pioneer 308 Quasar 308, 309, 306 RCA/PROSCAN 304, 305, 308, 309, 311, 312, 313, 310, 329 Realistic 309, 330, .
32 Watching the TV Operating optional equipment Operating a VCR To Turn on/off Control a VCR Change channels Record Play Stop Fast forward Rewind Pause Search the picture forward or backward Press VCR.
33 Watching the TV Using F a v orite Channels You can select programs from a list of favorite channels that you preset. Setting y our fav orite channels 1, 7 2 - 6 1 Press MENU. , Video Exit: Set : Selec t : Return Mode: Vivid Picture: 50 Brightness: 50 Color: 25 Hue: 0 Sharpness: 3 Backlight: 5 Color T emp.
34 Watching the TV W atching fav orite c hannels 1 2 , , ABC Fa vo r ite Channels 1: ABC 2: HBD 3: MTV 4: FOX 5: CBS 6: COMED 7: 7 8: 8 1 Press FAVORITES. The Favorite Channels options appear. 2 Press V / v to select the desired channel, then press . The selected channel will be displayed.
35 Watching the TV 3 Press V / v to select “Channel Label,” then press . 4 Press V / v to select “Channel”, then press . 5 Press V / v to scroll through the channel numbers you want to assign a label, then press . 6 Press V / v to select the “Label,” then press .
36 Using Advanced Features Using Ad v anced Features To adjust the setting Maximize the setting value To change the menu color You can choose the menu color from two types by selecting “Menu Color” in the (Setup) menu, then selecting “White” or “Black.
37 Using Advanced Features 1 Press MENU. 2 Press V / v to select (Video), then press . 3 Press V / v to select “Mode,” then press . 4 Press V / v to select the Picture Mode you want to adjust, then press . 5 Press V / v to select “Picture,” then press .
38 Using Advanced Features 6 Press V / v / B / b to make the desired adjustment, then press . Adjustable options Option Picture Brightness Color Hue* Sharpness Backlight * The adjustment is not available for the 480i, 480p, 1080i and 720p signals input to VIDEO 3 IN.
39 Using Advanced Features Adjusting the Sound Quality You can adjust the sound quality differently for each video input which can be selected using the TV/VIDEO button, and store it in memory. For details on the Effect mode, see pages 25 and 26. 1, 6 2 - 5 RESET 1 Press MENU.
40 Using Advanced Features 5 Repeat steps 3 and 4 to adjust other options. 6 Press MENU to exit the menu screen. To reset to the factory settings Press RESET while the menu is on the screen and the cursor is located on the right side of any menu item.
41 Using Advanced Features Selecting Stereo or Bilingual Pr ograms You can enjoy stereo, bilingual and mono programs. MTS/SAP Stereo Auto SAP Mono , Press MTS/SAP repeatedly until the desired sound indication appears.
42 Using Advanced Features Using the P arental Contr ol Feature The TV programs and movies shown on TV are given a rating signal based on the following rating systems.
43 Using Advanced Features 6 Press V / v to select “Lock,” then press . 7 Press V / v to select a desired rating, then press . If you select “Child,” “Youth,” or “Y.Adult” (Young Adult), the Parental Control is activated automatically.
44 Using Advanced Features To change the password 1 Press MENU. 2 Press V / v to select (Parent), then press . 3 Enter your four-digit password using the 0-9 buttons. The Parent menu options appear. 4 Press V / v to select “Change Password,” then press .
45 Using Advanced Features To select a TV rating in Canada: Press V / v to select “English Rating,” “French Rating,” or “U.S.A. Rating,” then press .
46 Using Advanced Features All of the extenders included in the selected ratings will be blocked. If you want to allow any of them to be viewed, go to step 8.
47 Using Advanced Features U.S. TV ratings U.S. TV ratings are for TV programs rated according to the U.S. Television Parental Guidelines. Option TV-Y (All Children) TV-Y7 (Directed to Older Children) TV-G (General Audience) TV-PG (Parental Guidance Suggested) TV-14 (Parents Strongly Cautioned) TV-MA (Mature Audience Only) U.
48 Using Advanced Features Ratings in Canada Sony’s predetermined ratings These are original ratings that Sony has predertmined according to the viewer’s age. Each rating allows you to view the certain programs, as follows: Option Child Youth Y.Adult (Young Adult) For descriptions of Child, Youth, and Y.
49 Using Advanced Features Canadian English Language ratings The Canadian English Language ratings are for TV programs in English broadcast in Canada. Option C (Programming intended for children under.
50 Using Advanced Features T urning Off the TV A utomatically You can set the TV to turn off automatically after a predetermined period of time (15, 30, 45, 60, or 90 minutes).
Additional Information 51 Tr oubleshooting If, after reading the following instructions, you have additional questions related to the use of your Sony TV, please call one of the following numbers.
Additional Information 52 Poor picture. Double images or ghosts. Only snow and noise appear on the screen. Dotted lines or stripes. No color. Color is not correct. Dark picture. The picture is too bright. Picture (stripe) noise. No sound./Noisy sound.
Additional Information 53 Specifications Television system: American TV standard Channel coverage: VHF: 2-13/UHF: 14-69/CATV: 1-125 Antenna: 75 ohm external terminal for VHF/UHF Screen size (measured diagonally): 21 inches Panel System: a-Si TFT Active Matrix LCD panel (Effective dots: more than 99.
Additional Information 54 Inde x to par ts and contr ols TV Fr ont P anel I I 1/ Standby/Sleep indicator page 23 Power indicator Remote Control sensor Power Switch page 20 Channel +/– buttons page 20 Volume +/– buttons page 23 Input Selector button page 28 Headphones jack Tip The CHANNEL + button have a tactile dot.
Additional Information 55 Remote Contr ol Tip The MTS/SAP button, the number 5 button and the CH + button have a tactile dot. Use the tactile dot as a reference when operating the TV.
Additional Information 56 Index F Favorite channels .................................. 33 Front and rear connectors ....................... 7 I Input select ........................................... 28 J Jump ........................................
.
.
.
Printed on 100% recycled paper using VOC (V olatile Or ganic Compound)-free vegetable oil based ink. Printed in Japan.
デバイスSony KLV 21SR2の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Sony KLV 21SR2をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSony KLV 21SR2の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sony KLV 21SR2の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sony KLV 21SR2で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sony KLV 21SR2を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSony KLV 21SR2の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sony KLV 21SR2に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSony KLV 21SR2デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
