SonyメーカーKV-14V4Uの使用説明書/サービス説明書
ページ先へ移動 of 43
SONY KV-14V4U (GB)_3-856-873- 11 (1) © 1996 by Sony Corporation Printed in Spain 3-856-873- 11 (1 ) GB Operating Instructions KV -14V4U T rinitr on Colour V ideo TV PAL NTSC 4.
2 Getting Started W ARNIN G To prevent fire or shock hazard, do not expose the unit to rain or moisture. Dangerously high voltages are present inside the set. Do not open the cabinet. Refer servicing to qualified personnel only. Caution Television programmes, films, video tapes and other materials may be copyrighted.
Getting Started 3 GB Contents Getting Started Step 1—Preparation ................................................... 4 Checking the supplied accessories ....................... 4 Inserting batteries into the Remote Commander ........................
4 Getting Started Getting Started Step 1 — Pr eparation Checking the Supplied Accessories When you have taken everything out of the carton, check that you have these items: • Remote Commander • Two R6 (size AA) batteries • Loop aerial Turn the Commander over, and remove the cover.
Getting Started 5 GB Step 2 — Connecting the Aerial Connecting an Indoor Aerial If your local UHF signal is strong, an indoor aerial can be used to obtain a clear picture. Connect the supplied loop aerial as follows. 1 Insert the aerial until it clicks.
6 Getting Started You should preset the channels (up to 60 channels) by choosing either the automatic or manual method. The automatic method is easier if you want to preset all receivable channels at once. Use the manual method if you want to allocate programme numbers to the channels one by one.
Getting Started 7 GB Pr esetting Channels Automatically 1 Press MENU to display the main menu. 2 Move the cursor ( z ) to “PROGRAMME PRESET” with + ◊ or – √ and press OK. The PROGRAMME PRESET menu appears. 3 Move the cursor ( z ) to “AUTO PROGRAMME” with + ◊ or – √ and press OK.
8 Getting Started Pr esetting Channels Manually 1 Press MENU to display the main menu. 2 Move the cursor ( z ) to “PROGRAMME PRESET” with + ◊ or – √ and press OK. The PROGRAMME PRESET menu appears. 3 Move the cursor ( z ) to “MANUAL PROGRAMME” with + ◊ or – √ and press OK.
Getting Started 9 GB Skipping Programme Positions You can skip unused programme positions when selecting programme with PROGR +/– buttons. However, the skipped programmes may still be called up when you select them with the number buttons. 1 Press MENU to display the main menu.
10 Getting Started Captioning a TV Station Name You can name a channel using up to five characters (letters or numbers) to be displayed on the TV screen (e.g. MTV). Using this function, you can easily identify which channel you are watching. 1 Press MENU to display the main menu.
Getting Started 11 GB Manual Fine-T uning Normally, the automatic fine-tuning (AFT) is already working. However, if the picture of a programme is distorted, you can use the manual fine- tuning function to obtain better picture reception. 1 Press MENU to display the main menu.
12 Getting Started VIDEO plus+ is a feature that simplifies programming the video TV to make timer recording. To use VIDEO plus+, each programme position needs to be matched with its VIDEO plus+ guide channel.
Getting Started 13 GB 4 Using + ◊ or – √ , move the cursor ( z ) to the programme position (number button) to which you want to preset the guide channel, and press OK. The GUIDE CH position turns red. 5 Select the guide channel you want to preset with + ◊ or – √ , and press OK.
14 Getting Started You need to set the clock for using timer recording and quick-timer recording functions. 1 Press MENU to display the main menu. 2 Move the cursor ( z ) to “CLOCK SET” with + ◊ or – √ and press OK. The CLOCK SET menu appears.
.
16 Basic Operations ABC 12 4.12W E D 20:00 Muting the Sound Press ¤ . The ¤ indicator appears and stays on the screen. To resume normal sound, press ¤ again or Á +. Displaying the On-scr een Information Press to display the following on-screen information.
.
18 Basic Operations W atching Line Input Press … repeatedly until the desired input indicator appears. To go back to the normal TV picture, press … until the programme position appears, or press ; on the Remote Commander once. For details of the video input picture, see page 35.
.
20 Basic Operations Playing a T ape 1 Press ; , PROGR +/– or number buttons on the Remote Commander, or PROGR +/– on the video TV when the u lamp is lit in red. 2 Insert a cassette. If you insert a cassette with its safety tab removed, playback starts automatically.
.
22 Basic Operations Recor ding TV Pr ogrammes Recor ding TV Programmes 1 Press ; , PROGR +/– or number buttons on the Remote Commander, or PROGR +/– on the video TV when the u lamp is lit in red. 2 Insert a cassette with a safety tab. 3 Select the programme position with PROGR +/–.
.
24 Basic Operations 5 Press OK, then set the minute of the recording start time to “15” with + ◊ or – √ . 6 Press OK, then set the hour of the recording stop time to “21” with + ◊ or – √ . 7 Press OK, then set the minute of the recording stop time to “55” with + ◊ or – √ .
25 Basic Operations GB Daily/weekly r ecording You can preset your video TV to record the same programme every day of the week (daily recording) or the same programme on the same day every week (weekly recording). Press – √ in step 3 until the desired setting appears in the “DATE” position.
26 Basic Operations Checking the Timer Settings You can display the list of the timer settings which you preset. Press TIMER ON SCREEN. The PROGRAMME LIST appears. Press TIMER ON SCREEN again to erase the PROGRAMME LIST. Changing or Canceling the Timer Settings 1 Press TIMER REC ON/OFF to turn off the TIMER REC lamp on the front of the video TV.
27 Basic Operations GB Recording Using the Quick-Timer You can preset your video TV to start timer recording immediately and to automatically stop recording after a specific time period. If you have not set the clock, quick-timer recording cannot be done.
28 Basic Operations Timer Recor ding with PDC Signals The German broadcasting system transmits PDC (Programme Delivery Control) signals with the TV programmes. These signals assure you that your timer recordings are made regardless of broadcast delays, early starts, or broadcast interruptions.
29 Basic Operations GB Just enter the programme’s “PlusCode” listed in the TV programme guide. The date, times and programme position of that programme are set automatically. Befor e you begin • Press ; , PROGR +/– or a number button on the Remote Commander, or PROGR +/– on the video TV to switch on the video TV.
30 Basic Operations 4 Repeat steps 2 and 3 to preset another timer setting. 5 Press TIMER REC ON. The TIMER REC lamp on the front of the video TV lights up and the video TV enters timer recording standby mode. To stop recording To stop the video TV while recording a programme, press p STOP.
31 Additional Operations GB Additional Operations Switching of f Automatically — Sleep Timer You can automatically switches the video TV into standby mode after a selected time period.
Additional Operations 32 Switching on at Y our Desir ed Time — On Timer You can preset your video TV to automatically switch on at a desired time. You can select the TV programme or video playback to be switched on. 1 Press MENU to display the main menu.
.
43 Additional Information GB.
.
36 Additional Information Function TV reception Clock and timer Playback Possible causes and remedies • The mains lead is disconnected. / Connect the mains lead. • The video TV is switched off. / Press ; , PROGR +/– or programme number on the Remote Commander, or PROGR +/– on the video TV.
37 Additional Information GB Problems The cassette is ejected when you press REC r . Recording cannot be done. Timer settings cannot be made. The cassette is ejected when you press TIMER REC ON/ OFF. The TIMER REC lamp does not light up even though you press TIMER REC ON/OFF.
38 Additional Information W or n V ideo Heads If your video TV displays a poor picture after you clean the video heads, you may need to replace them. Consult your dealer or the Sony Service Center nearest you. Check the V ideo Heads after 1,000 Hours of Use A video TV is a high precision machine.
39 Additional Information GB General Clock Quartz locked Clock back up Approx. 7 days Clock requirements 220-240 V AC, 50 Hz Power consumption 60 W Operating temperature 5°C to 40°C (41°F to 104°F) Storage temperature –20°C to 60°C (-4°F to 140°F) Dimensions Approx.
40 Additional Information T elevision Channel Number Guide Only the main transmitters are listed. Information regarding the regional sub-relay channel numbers can be obtained by contacting The BBC Engineering Information Dept.
41 Additional Information GB OPEN TIMER REC ON/OFF PDC REC AUTO REPEAT ON OFF AUTO NTSC COLOUR SYSTEM REC TIMER REC ON TIMER OPC EJECT PROOR PAL u Video TV Set—Fr ont This section briefly describes the buttons and controls on the video TV set and on the Remote Commander.
42 Additional Information ON TIMER MENU SLEEP VIDEO Plus+ ONCE DAILY WEEKLY PROGR REC PAUSE CLEAR QUICK TIMER COUNTER RESET TIMER REC ON/OFF OK 12 3 45 6 78 9 ÷ 0 REW FF STOP PLAY TIMER ON SCREEN Rem.
SONY KV-14V4U (GB)_3-856-873- 11 (1).
デバイスSony KV-14V4Uの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Sony KV-14V4Uをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSony KV-14V4Uの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sony KV-14V4Uの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sony KV-14V4Uで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sony KV-14V4Uを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSony KV-14V4Uの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sony KV-14V4Uに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSony KV-14V4Uデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
