SonyメーカーMHC-DX6AVの使用説明書/サービス説明書
ページ先へ移動 of 52
1 Mini Hi-Fi Component System ©2000 Sony Corporation Operating Instructions 4-227-084- 12 (1) MHC-BX6A V/DX6A V Owner’s Record The model and serial numbers are located on the rear panel. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product.
2 WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.
3 T able of Contents Getting Started Step 1: Hooking up the system ............ 4 Step 2: Setting up your speakers ......... 7 Step 3: Setting the time ......................... 9 Step 4: Presetting radio stations ........ 10 Saving the power in standby mode .
4 2 2 1 3 2 4 5 6 + – R L + Getting Started Step 1: Hooking up the system Follow steps 1 through 6 of the following procedure to hook up your system using the supplied cords and accessories. Center surround speaker Front speaker (Left) Front speaker (Right) Rear surround speaker (Left) Rear surround speaker (Right) 1 Connect the front speakers.
5 4 Connect the FM/AM antennas. Set up the AM loop antenna, then connect it. Jack type A Jack type B 5 For models with a voltage selector, set VOLTAGE SELECTOR to position of your local power line voltage. + – R L + – R L 2 Connect the rear surround speakers.
6 6 Connect the power cord to a wall outlet. The demonstration appears in the display. When you press ?/1 , the system turns on and the demonstration automatically ends. If the supplied adapter on the plug does not fit your wall outlet, detach it from the plug (only for models equipped with an adapter).
7 2 Place the center surround speaker at about the same height as the front speakers ( A ). Align the center surround speaker with the front speakers or place it slightly behind the front speakers ( B ). A B 3 Place the rear surround speakers facing each other at about 60 to 90 cm above your listening position.
8 1 Press DOLBY PRO LOGIC (or PRO LOGIC on the remote). “PRO LOGIC ON” appears. 2 Press T.TONE on the remote. Each speaker emits the test tone in the following order. Adjust the volume of the test tone. 3 From your listening position, press CENTER +/– and REAR +/– on the remote to adjust the volume.
9 1 Press CLOCK/TIMER SET. The hour indication flashes. Step 3: Setting the time You must set the time before using the timer functions. The clock uses a 24-hour system on the European model, and a 12-hour system on other models. The 12-hour system is used for illustration purposes.
10 VOLUME ALL DISCS ß MONO TUNED STEREO MHz kHz VOLUME ALL DISCS ß 1 Press TUNER/BAND repeatedly to select FM or AM. 2 Press and hold + or – (or TUNING +/– on the remote) until the frequency indication starts to change, then release. Scanning stops automatically when a station is tuned in.
11 VOLUME ALL DISCS ß 4 Press ENTER. The station is stored. 5 Repeat steps 1 through 4 to store other stations. To tune in a station with a weak signal Press + or – (or TUNING +/– on the remote) repeatedly in step 2 to tune in the station manually.
12 DISPLAY Saving the power in standby mode (MHC-BX6AV only) You can lower the power consumption to a minimum (Power Saving Mode) and save energy in the standby mode.
Basic Operations 13 1 Press Z OPEN/CLOSE and place up to two CDs on the disc tray. If a disc is not placed properly, it will not be recognized. To insert a third disc, press DISC SKIP EX-CHANGE to rotate the disc tray. 2 Press one of the DISC 1~3 buttons.
14 To Do this Stop playback Press x . Pause Press X . Press again to resume playback. Select a track During play or pause, press > (to go forward) or . (to go back). Find a point in Turn the shuttle clockwise a track (to go forward) or counterclockwise (to go back) until it clicks and hold (or press and hold down M or m on the remote).
Basic Operations 15 1 Press A and insert a recordable tape into deck B. 2 Press CD. 3 Press Z OPEN/CLOSE and place a CD. Then press Z OPEN/CLOSE again to close the disc tray. When the CD you want to record is not selected, press DISC SKIP EX-CHANGE repeatedly to select the CD you want.
16 VOLUME MHz kHz ALL DISCS ß m M VOL +/– TUNING +/– PRESET +/– TUNER/BAND +/– STEREO/ MONO VOLUME 1 Press TUNER/BAND repeatedly to select FM or AM. 2 Turn the shuttle until it clicks (or press PRESET +/– on the remote) to tune in the desired preset station.
Basic Operations 17 Recording fr om the r adio You can record the radio program on a tape by calling up a preset station. You can use a TYPE I (normal) tape. 1 Press A and insert a recordable tape into deck B. 2 Press TUNER/BAND to select the band you want.
18 nN X x . > m M VOL +/– TAPE A/B x X VOLUME . > VOLUME MHz kHz ALL DISCS ß m M 3 Turn the shuttle until it clicks to tune in a preset station.
Basic Operations 19 1 Press TAPE A/B. To select deck A or B, press TAPE A/B repeatedly. 2 Press A and insert a recorded tape in deck A or B. 3 Press DIRECTION repeatedly to select g to play one side. Select j to play both sides. To play both decks in succession, select RELAY (Relay Play)*.
20 x 1 Press TAPE A/B repeatedly to select deck A. 2 Press A and insert a recorded tape in deck A and a recordable tape in deck B. 3 Press REC. Deck B stands by to record in the direction of the indicator on hH (the right indicator lights to record on the forward side and the left indicator lights to record on the reverse side).
21 DISPLAY Using the CD display You can check the remaining time of the current track or the entire CD. The CD Player ?/1 (Power) t t t , Press DISPLAY.
22 REPEAT Playing the CD tr acks r epeatedly –– Repeat Play This function lets you repeat a single CD or all CDs in Normal Play, Shuffle Play, and Program Play. , Press REPEAT during playback until “REPEAT” appears in the display. Repeat Play starts.
23 DISC 1~3 > Playing the CD tr acks in r andom order –– Shuffle Play You can play all the tracks on one CD or all CDs in random order. 1 Press CD, then place a CD. 2 Press PLAY MODE repeatedly until “1 DISC SHUFFLE” or “ALL DISCS SHUFFLE” appears in the display.
24 1 Press CD, then place a CD. 2 Press PLAY MODE repeatedly until “PROGRAM” appears in the display. 3 Press one of the DISC 1~3 buttons to select a CD. 4 Press . or > until the desired track appears in the display. 5 Press ENTER. The track is programmed.
25 To Press Check the CHECK on the remote program repeatedly. After the last track, “CHECK END” appears. Clear a track from CLEAR on the remote in the end stop mode. Clear a specific CHECK on the remote track repeatedly until the number of the track to be erased appears, then press CLEAR.
26 You can record from CD, tape, or radio as you like. For example, you can record just the songs you want or record from the middle of the tape. 1 Insert a recordable tape into deck B. 2 Press the function button of the source you want to record (e.g.
27 SHUFFLE REPEAT 1 ALL 1 DISC S PROGRAM STEP VOLUME SYNC ß CHECK EDIT p 1 Place a CD and insert a recordable tape into deck B. 2 Press CD. 3 Press PLAY MODE repeatedly until “PROGRAM” appears in the display. 4 Press one of the DISC 1~3 buttons to select a CD.
28 8 Press CD SYNC. Deck B stands by to record in the direction of the indication on hH (the right indication lights to record on the forward side and the left indicator lights to record on the reverse side). The CD player stands by for playback. 9 Press DIRECTION repeatedly to select g to record on one side.
29 You can reinforce the bass, create a more powerful sound, and listen with headphones. For a powerful sound (GROOVE) Press GROOVE. The GROOVE button lights. The volume switches to power mode, DBFB* is automatically activated (“DBFB ” appears), and the equalizer curve changes.
30 Selecting surr ound effects You can enjoy surround effects. , Press DSP repeatedly to select the surround effect you desire. SURROUND ON: Reproduces stereo sources in surround sound. HALL: Reproduces the acoustics of a concert hall.* THEATER: Reproduces the acoustics of a movie theater.
31 Enjoying Dolby Pr o Logic Surr ound sound You can enjoy the Dolby Pro Logic Surround sound of videos that are Dolby Surround encoded ( ). Complete the setup and adjustments first (see page 7). , Press DOLBY PRO LOGIC (or PRO LOGIC on the remote) while playing a program source.
32 Other Features Radio Data System (RDS) is a broadcasting service that allows radio stations to send additional information along with the regular program signal. This tuner offers convenient RDS features like station name display and location of stations by program type.
33 1 Press PTY/DIRECTION while listening to the radio. 2 Turn the shuttle until it clicks to select the program type you want. See the “List of program types” section below. 3 Press ENTER. The unit starts searching the preset RDS stations (“SEARCH” and the selected program type are shown alternately in the display).
34 SLEEP F alling asleep to music — Sleep Timer You can set the system to turn off at a preset time, so you can fall sleep to music. You can preset the time to be turned off in 10 minute increments.
35 1 2 REC SLEEP VOLUME ALL DISCS ß 1 2 REC SLEEP VOLUME ALL DISCS ß CLOCK/TIMER SELECT You can wake up to music at a preset time every day. Make sure you have set the clock (see “Step 3: Setting the time” on page 9). 1 Prepare the music source you want to play.
36 12 REC SLEEP VOLUME ALL DISCS ß CLOCK/TIMER SELECT 1 Tune in the preset radio station (see “Listening to the radio” on page 16). 2 Press CLOCK/TIMER SET. “SET (DAILY 1)” appears. 3 Press . or > repeatedly to select “REC”, then press ENTER.
37 12 REC SLEEP VOLUME ALL DISCS ß Connecting audio components Select one of the following connections, depending on the component to be connected and method of connecting.
38 Connecting an MD deck for listening to music Make sure to match the color of the plugs and the connectors. To listen to the sound of the connected MD deck, press MD (VIDEO).
39 To the audio output of the video deck Connecting a VCR By connecting the audio output jacks of your VCR to the MD/VIDEO IN jacks using an optional audio cable, you can enjoy video playback in powerful stereo sound. Make sure to match the color of the plugs and the connectors.
40 Connecting external antennas Connect the external antenna to improve the reception. Refer to the instructions of each component. FM antenna Connect the optional FM external antenna.
41 AM antenna Connect a 6- to 15- meter insulated wire to the AM antenna terminal. Leave the supplied AM loop antenna connected. Jack type A Jack type B Insulated wire (not supplied) Insulated wire (n.
42 Notes on CDs • Before playing, clean the CD with a cleaning cloth. Wipe the CD from the center out. • Do not use solvents such as benzene, thinner, commercially available cleaners or anti-static spray intended for vinyl LPs.
43 T r oubleshooting If you run into any problem using this stereo system, use the following check list. First, check that the power cord is connected firmly and the speakers are connected correctly and firmly. Should any problem persist, consult your nearest Sony dealer.
44 Troubleshooting (continued) There is severe hum or noise. • A TV or VCR is placed too close to the stereo system. Move the stereo system away from the TV or VCR.
45 Tape Deck The tape does not record. • There is no tape in the cassette holder. • The tab has been removed from the cassette (see “To save a tape permanently” on page 42). • The tape has reeled to the end. The tape does not record nor play or there is a decrease in sound level.
46 Specifications European model MHC-BX6AV Front Speaker: DIN power output (rated) 40 + 40 watts (6 ohms at 1 kHz, DIN) Continuous RMS power output (reference) 50 + 50 watts (6 ohms at 1 kHz, 10% THD).
47 Tape player section Recording system 4-track 2-channel stereo Frequency response 40 – 13,000 Hz (±3 dB), using Sony TYPE I cassette Wow and flutter ±0.15% W.Peak (IEC) 0.1% W.RMS (NAB) ±0.2% W.Peak (DIN) Tuner section FM stereo, FM/AM superheterodyne tuner FM tuner section Tuning range 87.
48 For the customers in Canada Use only the supplied SS-RS106 rear surround speaker for connection to the REAR SPEAKER connector, the supplied SS-CT106 center surround speaker for connection to the CENTER SPEAKER connector on the MHC-BX6AV.
49.
50.
51.
52 Index N, O Normal Play 13 P, Q Playing a CD 13 a preset station 16 a tape 18 tracks in random order (Shuffle Play) 23 tracks in the desired order (Program Play) 24 tracks repeatedly (Repeat Play) 2.
デバイスSony MHC-DX6AVの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Sony MHC-DX6AVをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSony MHC-DX6AVの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sony MHC-DX6AVの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sony MHC-DX6AVで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sony MHC-DX6AVを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSony MHC-DX6AVの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sony MHC-DX6AVに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSony MHC-DX6AVデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
