SonyメーカーMHC-ZX70DVDの使用説明書/サービス説明書
ページ先へ移動 of 108
Operating Instructions Mini Hi-Fi Component System 4-229-805- 43 (1) ©2000 Sony Corporation MHC-ZX70D VD.
2 WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.
3 T able of Contents continued This Player Can Play the Following Discs ..... 4 Hookups Step 1: Hooking up the system ................ 6 Step 2: Setting up your speakers ............ 10 Step 3: Setting the time .......................... 12 Saving the power in standby mode* .
4 This Player Can Play the Following Discs DVD VIDEOs Disc logo: Contents: Audio + Video Disc size and play time: - 12 cm: About 4 h (for single-sided DVD)/ about 8 h (for double-sided DVD) - 8cm: About 80 min. (for single-sided DVD)/about 160 min. (for double- sided DVD) * “DVD VIDEO” logo is a trademark.
5 Region code of DVDs you can play on this unit Your DVD player has a region code printed on the back of the unit and will only play DVDs that are labeled with identical region codes. DVDs labeled ALL will also be played on this unit. If you try to play any other DVD, the message “Playing this disc prohibited by area limits.
6 4 7 1 3 1 2 3 2 2 1 6 5 Hookups Step 1: Hooking up the system Follow steps 1 through 9 of the following procedure to hook up your system using the supplied cords and accessories. 1 Connect the front speakers. Connect the speaker cords of the front speakers to the FRONT SPEAKER jacks as below.
7 Hookups 2 Connect the rear speakers. Connect the speaker cords of the rear speakers to the REAR SPEAKER jacks. R L + – + Notes • Keep the speaker cords away from the antennas to prevent noise. • Do not place the rear speakers on top of a TV. This may cause color distortion in the TV screen.
8 VIDEO OUT 5 Connect the video input jack of your TV to the VIDEO OUT jack with the supplied video cable. When using a TV Turn on the TV and select the video input so you can view the pictures from this system.
9 Hookups To connect optional components See page 86. To deactivate/activate the demonstration When you set the time (“Step 3: Setting the time” on page 12), the demonstration is deactivated. To activate/deactivate the demonstration again, press DISPLAY repeatedly while the system is off.
10 Attaching the front speaker pads Attach the supplied speaker pads to the bottom of the front speakers to stabilize the speaker and prevent it from slipping. Setting the center speaker Set the center speaker firmly on top of the TV set, making sure it is completely level.
11 Hookups x M m > . nN v V bB X nN N T t C c VOL +/– MODE SELECT O B / b 1 2, 4 3 3 From your listening position, press CENTER LEVEL (+/–) and REAR LEVEL (+/–) on the remote to adjust the volume. For the rear level, the rear right/left speaker will emit sound.
12 4 Move the multi stick toward b . The minute indication flashes. 5 Move the multi stick toward V or v repeatedly to set the minute. 6 Press PUSH ENTER. To cancel the menu operation Press MODE SELECT. Tips • Refer to the illustration to use the multi stick.
13 Hookups ?/1 (Power) Saving the power in standby mode (North American and European models only) You can lower the power consumption to a minimum (Power Saving Mode) and save energy in the standby mode. DISPLAY , Press DISPLAY repeatedly when the power is off.
14 3 Press V or v repeatedly to select the main item you want, then press ENTER. 4 Press V or v repeatedly to select the item you want, then press ENTER. Other settings appear for the item you select. 5 Press B / b / V / v repeatedly to select the setting you want, then press ENTER.
15 Setting up for DVD/VIDEO CD/CD Setting the on-screen display –– SCREEN SETUP TV TYPE --------------------- Select the aspect ratio of the connected TV. • 16:9 or 16:9/4:3 WIDE MODE: A wide-screen TV. • 4:3 LETTER BOX: A normal TV displaying a wide picture with bands displayed on the upper and lower portions of the screen.
16 Custom settings ––CUSTOM SETUP COLOR SYSTEM (Asian model only) ------ Select the color system when you play a VIDEO CD. • AUTO: Outputs the video signal in the system of the disc, either PAL or NTSC. If your TV uses a DUAL system, select AUTO.
17 Setting up for DVD/VIDEO CD/CD CUSTOM SETUP PARENTAL CONTROL To confirm, enter password again then press . To return, press . RETURN ENTER To quit, press . DVD SETUP 2 Enter a password in 4 digits using the numeric buttons on the remote, then press ENTER.
18 6 Press V or v repeatedly to select “LEVEL”, then press b . 7 Press V or v repeatedly to select the level, then press ENTER. The lower the value is, the stricter the limitation.
19 Setting up for DVD/VIDEO CD/CD Setting for sound –– AUDIO SETUP TRACK SELECTION -------------- Give the sound track which contains the highest number of channels priority when you play a DVD on which multiple audio formats are recorded.
20 AUDIO SETUP TRACK SELECTION: DIGITAL OUT: DOLBY DIGITAL: To set, press , then . OFF ON D-PCM ENTER To quit, press . DVD SETUP Setting for the signal to the digital output Switch the methods of outp.
21 Setting up for DVD/VIDEO CD/CD 45 ° 90 ° 20 ° B A A B Speaker settings –– SPEAKER SETUP Set up your speaker system for playback of 5.1CH DVDs. SETUP ------------------------ Select the rear speaker location and whether a subwoofer is connected or not.
22 Speaker settings (continued) BALANCE ------------------------------ Adjust the balance of each speaker in 1.0 dB steps from –6 dB [L] to +6 dB [R]. Default adjustments are 0.0 dB. • FRONT: The balance between the front left and right speakers. • REAR: The balance between the rear left and right speakers.
23 Setting up for DVD/VIDEO CD/CD If connecting the front speakers only You can use this system with the front speakers only. In this case, switch the system to the 2-channel mode. , Press MULTI/2CH to turn off the indicator on the button. In the DVD 2CH mode, all of the audio channels are mixed down to a 2-channel audio signal.
24 x M m > . nN V v b B X nN N T t C c VOL +/– O ENTER STEP c/C SLOW t/T B / b X D.SKIP 1 Turn on your TV and select the video input. Refer to the operating instructions supplied with your TV if you need help. 2 Press one of the A 1~5 buttons and place a disc on the disc tray.
The DVD/VIDEO CD/CD Player 25 3 Press one of the DISC 1~5 buttons. The disc tray closes and playback starts. If you press DVD NX when the disc tray is closed, playback starts from the disc loaded on the tray whose disc pointer indicator lights.
26 Playing discs (continued) To Play all discs Remove a disc Exchange other discs while playing Adjust the volume * 1 There may be some disturbance in the video image. * 2 Only when the PBC function is set to off or when playing VIDEO CDs without PBC functions (Ver 1.
The DVD/VIDEO CD/CD Player 27 Notes • When a tray has not been read by the unit, the disc presence indicator may light even though there is no disc in the tray. • Depending on the DVD or VIDEO CD, some operations may be prohibited. • VIDEO CDs cannot be viewed slowly or frame by frame in the reverse direction.
28 Checking the text information of the disc You can check the DVD TEXT or CD TEXT of the disc on the TV screen and the front panel display. DVD TEXT and CD TEXT is information recorded on the disc which you cannot change. , Press DISPLAY repeatedly while playing a DVD or a TEXT-CD.
The DVD/VIDEO CD/CD Player 29 Checking the playing time and remaining time You can check the remaining time of the current track or that of the disc. When a TEXT disc is loaded, you can check the information stored on the disc, such as the disc titles.
30 Checking the playing time and remaining time (continued) When playback is stopped During Program Play mode when there is a program t The last title, chapter, or track number of the program and the .
The DVD/VIDEO CD/CD Player 31 Using the on-screen display 1 Press DVD DISPLAY while playing a DVD. 2 Select “TIME/TEXT” of the control menu display on the TV screen.
32 Playing DVDs using the menu Using the title menu A DVD is divided into long sections of a picture or a music piece called “titles.” When you play a DVD which contains several titles, you can select the title you want using the title menu. 1 Press FUNCTION repeatedly until “DVD” appears in the display, then place a disc.
The DVD/VIDEO CD/CD Player 33 Using the DVD menu Some DVDs allow you to select the disc contents using the menu. When you play these DVDs, you can select the language for the subtitles, the language for the sound, etc., using the DVD menu. 1 Press FUNCTION repeatedly until “DVD” appears in the display, then place a disc.
34 Playing VIDEO CDs with PBC functions (V er . 2.0) When playing VIDEO CDs with PBC functions (Ver. 2.0 discs), you can enjoy simple interactive operations, operations with search functions, etc. PBC Playback allows you to play VIDEO CDs interactively, following the menu screen on the TV screen.
The DVD/VIDEO CD/CD Player 35 To cancel PBC Playback of VIDEO CDs with PBC functions (Ver. 2.0) There are two ways to cancel the PBC functions. • Before you start playing, select the track you want using .
36 Setting for the surround sound Select the mode to enjoy multi channel surround sound such as Dolby Digital. When you connect 2 front speakers and 2 rear speakers, use 3D sound imaging to shift the .
The DVD/VIDEO CD/CD Player 37 Effects of each item OFF Outputs all channel signals recorded on the disc. For example, outputs 2-channel signals for stereo sound of a CD or 5-channel signals for Dolby Digital sound of a DVD.
38 VES (Virtual Enhanced Surround) A Uses 3D sound imaging to create virtual rear speakers from the sound of the front speakers (L, R) without using actual rear speakers.
The DVD/VIDEO CD/CD Player 39 1 Press FUNCTION repeatedly until “DVD” appears in the display, then place a disc. 2 Press MODE SELECT repeatedly to select “Set Up Mode”, then press PUSH ENTER. 3 Move the multi stick toward B or b repeatedly to select “DVD Set Up ?”, then press PUSH ENTER.
40 Using the on-screen display 1 Press FUNCTION repeatedly until “DVD” appears in the display, then place a disc. 2 Press DVD DISPLAY to display the control menu display on the TV screen. The main items appear. 3 Press V or v repeatedly to select the “REPEAT” icon on the TV screen, then press ENTER.
The DVD/VIDEO CD/CD Player 41 1 8 ( 3 4 ) 1 2 ( 2 7 ) C 0 1 : 3 2 : 5 5 A–B REPEAT DVD A: 18 – 01 : 32 : 55 CHAPTER TIME PLAY Set point B with . ENTER To cancel, press . CLEAR 1 8 ( 3 4 ) 1 2 ( 2 7 ) C 0 1 : 3 2 : 5 5 A–B REPEAT DVD PLAY Set point A with .
42 Playing in random order –– Shuffle Play You can play all the titles or tracks on one disc or all discs in random order. 1 Press FUNCTION repeatedly until “DVD” appears in the display, then place a disc. 2 While in the stop mode, press MODE SELECT repeatedly to select “Set Up Mode”, then press PUSH ENTER.
The DVD/VIDEO CD/CD Player 43 Enjoying your original playback order –– Pr ogram Play You can make a program of up to 25 steps from all the discs in the order you want them to be played. 1 Press FUNCTION repeatedly until “DVD” appears in the display, then place a disc.
44 Enjoying your original playback order (continued) 8 To program additional steps, repeat steps 5 through 7. 9 Press DVD N to start playback. All the tracks play in the order you selected. To cancel Program Play Press CLEAR. To cancel programming 1 Press FUNCTION repeatedly until “DVD” appears in the display.
45 The DVD/VIDEO CD/CD Player When playing back a DVD Searching for the title/ chapter You can search by selecting the title or chapter. 1 Press FUNCTION repeatedly until “DVD” appears in the display, then place a disc. 2 Press DVD DISPLAY to display the control menu display on the TV screen.
46 Locating a start point using the time code You can search by inputting the time code. The time code corresponds to the approximate elapsed playing time. For example, to search for a scene 2 hours 30 minutes 20 seconds past the beginning, input 2:30:20.
47 The DVD/VIDEO CD/CD Player Displaying the subtitles With DVDs on which multilingual subtitles are recorded, you can change the subtitle language whenever you want while playing a DVD, and turn it on or off whenever you want. For example, you can select the language you want to master and turn the subtitles on for better understanding.
48 Selecting the language for the sounds on the DVD With DVDs recorded with multilingual sounds, you can select the language you want while playing a DVD. , Press AUDIO. Each time you press the button, the item changes. Tip You can change the language using the control menu as follows: 1 Press DVD DISPLAY when the function is DVD.
49 The DVD/VIDEO CD/CD Player 1 8 ( 3 4 ) 1 2 ( 2 7 ) C 0 1 : 3 2 : 5 5 DVD PLAY L DOLBY DIGITAL 3/2.1 R LS RS C PROGRAM FORMAT LFE To select, press , then . ENTER 1: ENGLISH Displaying the audio information of the disc When you select “AUDIO”, the playing channels are displayed on the screen.
50 Changing the angles When playing back DVDs on which various angles (multi-angles) for a scene are recorded, the ANGLE indicator lights in green. Then, you can change the angles.
51 The DVD/VIDEO CD/CD Player When playing back a CD/VIDEO CD Searching for the track/ index/scene You can search by selecting the track/index/scene. When you playback a VIDEO CD/CD, “TRACK” and “INDEX” are displayed. When you playback a VIDEO CD with PBC functions, “SCENE” is displayed.
52 Selecting the stereo/ monaural (L/R) sound With multiplex CDs or VIDEO CDs, you can select the sound from the right or left channel and listen to the sound of the selected channel through both the right and left speakers. In this case, the sound loses the stereo effect.
53 The DVD/VIDEO CD/CD Player Other functions Checking the play information This function is available only for DVD discs. You can check the play information on the bit rate, bit rate history, and the portion where the disc is played (layer).
54 LAYER Indicates where the disc is played. When the DVD has dual-layer, the player indicates which layer is being read. For details on layer, see “DVD” on page 98.
55 The DVD/VIDEO CD/CD Player Dividing playback into 9 sections — Strobe Play When playing a DVD or VIDEO CD, you can display 9 consecutive sections of the disc on the screen. In this case, the sections show still images. 1 Press FUNCTION repeatedly until “DVD” appears in the display, then place a disc.
56 Scanning the title, chapter , or track When playing a DVD or VIDEO CD, you can check the top picture of titles, chapters, and tracks of the disc on a screen divided in 9 sections, and start playback from the chosen title, chapter, or track. You cannot scan the tracks on a VIDEO CD during PBC playback.
57 The DVD/VIDEO CD/CD Player Displaying different angles simultaneously With DVDs on which various angles (multi- angles) for a scene are recorded, you can display all the angles recorded on the disc on the same screen, and start playback in continuous mode at the chosen angle directly.
58 ?/1 (Power) 1 Multi stick PUSH ENTER 2 3 Preset number The Radio Presetting radio stations You can preset a total of 30 stations (20 for FM and 10 for AM). 1 Press TUNER/BAND repeatedly to select FM or AM. 2 Press and hold m or M until the frequency indication starts to change, then release.
59 The Radio Listening to the radio — Preset T uning Preset radio stations in the tuner’s memory first (see “Presetting radio stations” on page 58). continued To erase a preset station 1 Press TUNER/BAND repeatedly to select FM or AM. 2 Press MODE SELECT repeatedly to select “Set Up Mode”, then press PUSH ENTER.
60 1 Press TUNER/BAND repeatedly to select FM or AM. 2 Press . or > repeatedly or use the numeric buttons to tune in the desired preset station. When you directly tune in a preset number over 10, press >10 first, then press the corresponding number buttons.
61 The Radio Using the Radio Data System (RDS) (For European model only) What is the Radio Data System? Radio Data System (RDS) is a broadcasting service that allows radio stations to send additional information along with the regular program signal.
62 List of program types (PTY) NEWS News programs. AFFAIRS Topical programs that expand on current news. INFO Programs about consumer affairs, medical advice. SPORT Sports programs. EDUCATE Educational programs, such as “how-to” programs and advice.
63 The Radio CHILDREN Programs for young. SOCIAL Programs about people and the things that affect them. RELIGION Programs of religious contents. PHONE IN Programs where members of the public express their views by phone or in a public forum. TRAVEL Programs about travel.
64 The Tape deck Playing a tape You can use any type of tape, TYPE I (normal), TYPE II (CrO 2 ) or TYPE IV (metal), since the deck automatically detects the tape type. Insert with the side you want to play facing forward. Tape presence indicator 1 Press A A or A B and insert a recorded tape into deck A or B.
The Tape deck 65 Tips • Pressing TAPE A (or TAPE B) N or n when the power is off automatically turns the power on and starts tape playback if there is a tape in the deck (One Touch Play). When the system is in the Power Saving Mode, the One Touch Play function does not work.
66 Recording a disc — CD Synchro Recor ding The CD SYNC button lets you record the audio from a VIDEO CD, or CD to a tape easily. You can use TYPE I (normal) or TYPE II (CrO 2 ) tapes. The recording level is adjusted automatically. 1 Press A B and insert a recordable tape into deck B.
The Tape deck 67 To stop recording Press x . To cancel the menu operation Press MODE SELECT. Tips • If you want to record from the reverse side, press TAPE B n to light its indicator after pressing CD SYNC. • When you record on both sides, be sure to start from the front side.
68 Recording from a tape — High-speed Dubbing You can use TYPE I (normal) or TYPE II (CrO 2 ) tapes. The recording level is automatically adjusted. Insert with the side you want to play/record facing forward. 2 Press HI-DUB. Deck B stands by for recording.
The Tape deck 69 Recording on a tape manually You can record from a disc, tape, or radio as you like. For example, you can record just the songs you want or record from the middle of the tape. The recording level is adjusted automatically. 1 Insert a recordable tape into deck B.
70 Tips • If you want to record from the reverse side, press TAPE B n to light its indicator after pressing REC PAUSE/START in step 3. • To record non-preset stations, use m and M in step 2 to tune in the desired station manually.
The Tape deck 71 1 Place a disc and insert a recordable tape into deck B. 2 Press FUNCTION repeatedly until “DVD” appears in the display. 3 While in stop mode, press MODE SELECT to select “Set Up Mode”, then press ENTER. 4 Press B or b repeatedly to select “DVD Set Up ?”, then press ENTER.
72 10 Press DVD NX , and then press x to check the total playing time. The total playing time appears in the display.* If the total program time exceeds the length of the tape for recording, start again from step 3. * If there are discs in the program whose TOC has not been read, the program screen returns after TOC reading is complete.
The Tape deck 73 Mixing and recording sounds (Asian model only) You can “mix” sounds by playing one of the components and singing or speaking into a microphone (not supplied). The mixed sounds can be recorded on a tape. Multi stick PUSH ENTER 5 3 1 4,9 Power ( ?/1 ) continued 2 4 Press REC PAUSE/START.
74 Mixing and recording sounds (continued) When you use DVDs or VIDEO CDs Turn on your TV and switch it to the appropriate video input. Refer to the operating instructions supplied with your TV for details. When you are done Turn MIC VOL to MIN and disconnect the microphone from MIC.
75 Sound Adjustment Sound Adjustment Adjusting the sound You can reinforce the bass or create a more powerful sound. GROOVE V-GROOVE GROOVE-EX ?/1 (Power) To reinforce lower bass sound (V-GROOVE) Press V-GROOVE.
76 Selecting the preset audio effect file The audio effect file menu lets you select the sound characteristic according to the sound you are listening to.
77 Sound Adjustment Creating a personal audio effect file — Personal file You can create a personal file of audio patterns (surround effect and graphic equalizer) and store them in the memory of the unit. The personal files can later be used when you listen to a favorite tape, disc, or radio program.
78 4 Move the multi stick toward B or b repeatedly to select the effect you desire, then press PUSH ENTER. Each time you move the multi stick toward B or b , the display changes as follows: Spectrum 1 Y Spectrum 2 Y Spectrum 3 Y Spectrum Off To cancel the menu operation Press MODE SELECT.
79 Sound Adjustment Selecting surround effects You can enjoy surround effects. The surround effects cannot be used when the function is set to “DVD”. When the function is changed to a function other than “DVD”, the surround setting is restored.
80 Enjoying Dolby Pro Logic Surround sound You can enjoy the Dolby Pro Logic Surround sound of videos, MDs, tapes and tuner that are Dolby Surround encoded ( ). Complete the setup and adjustments first (see page 10). , Press PRO LOGIC while playing a program source.
81 Sound Adjustment Controlling the graphic equalizer You can control the sound by raising or lowering the levels of specific frequency ranges. Before operation, first select the audio effect you want for your basic sound. 4 Move the multi stick toward B or b repeatedly to select a frequency band (5 steps).
82 Timer Falling asleep to music — Sleep Timer You can let the system turn off at a preset time, so you can sleep to music. You can preset the time to be turned off in 10 minute increments.
83 Timer 3 Press MODE SELECT repeatedly to select “Set Up Mode”, then press PUSH ENTER. 4 Move the multi stick toward B or b repeatedly to select “Timer Set Up ?”, then press PUSH ENTER. 5 Move the multi stick toward B or b repeatedly to select “Timer Set ?”, then press PUSH ENTER.
84 To cancel the timer operation 1 Press MODE SELECT repeatedly to select “Set Up Mode”, then press PUSH ENTER. 2 Move the multi stick toward B or b repeatedly to select “Timer Set Up ?”, then press PUSH ENTER. 3 Move the multi stick toward B or b repeatedly to select “Timer Select ?”, then press PUSH ENTER.
85 Timer 4 Move the multi stick toward B or b repeatedly to select “Timer Set ?”, then press PUSH ENTER. “Set Daily 1” appears. 5 Move the multi stick toward B or b repeatedly to select “Set REC”, then press PUSH ENTER. “On” appears and the hour digits flash in the display.
86 Optional components Connecting audio components Do the following connections depending on the equipment to be connected and the method of connecting. Refer to the instructions of each component. Connecting an MD deck for digital recording You can record from a CD into the MD deck digitally by connecting an optical cable.
87 Optional components Connecting a subwoofer speaker You can connect an optional subwoofer speaker. Connecting a microphone (Asian model only) You can connect an optional microphone to the MIC jack. Adjust the microphone volume by turning MIC VOL. MIC MIC VOL Connecting headphones You can connect headphones to the PHONES jack.
88 Connecting a VCR Make sure to match the color of the plugs and the connectors. To listen to the sound of the connected VCR, press FUNCTION repeatedly until “VIDEO” appears. By connecting the audio output jacks of your VCR to the VIDEO (AUDIO) IN jacks using an optional audio cable, you can enjoy video playback in powerful stereo sound.
89 Optional components AM antenna Connect a 6- to 15- meter insulated wire to the AM antenna terminal. Leave the supplied AM loop antenna connected. Jack type A FM75 AM Jack type B FM75 COAXIAL Insula.
90 Additional Information Precautions On operating voltage Before operating the system, check that the operating voltage of your system is identical with the voltage of your local power supply.
91 Additional Information If you later want to reuse the tape for recording, cover the broken tab with adhesive tape. However, be careful not to cover the detector slots which allow the tape player to automatically detect the type of tape. Before placing a cassette in the tape deck Take up any slack in the tape.
92 Troubleshooting (continued) There is severe hum or noise. • A TV or VCR is placed too close to the system. Move the system away from the TV or VCR. “--:--” appears in the display. • A power interruption occurred. Set the clock and timer settings again.
93 Additional Information Pictur e There is no picture. • Press FUNCTION repeatedly until “DVD” appears in the display. • Check that the player is connected securely. • The video connecting cord is damaged. Replace it with a new one. • Make sure you connect the player to the video input connector on the TV (page 8).
94 The angles cannot be changed when you play a DVD. • Multi-angles are not recorded on the DVD. • Change the angles when “ANGLE” appears on the front panel display (page 50). • Changing the angles is prohibited on the DVD. Tape Deck The tape does not record.
95 Additional Information Specifications Amplifier section AUDIO POWER SPECIFICATIONS: (U.S.A. model only) POWER OUTPUT AND TOTAL HARMONIC DISTORTION: with 8 ohm loads both channels driven, from 120- 10,000 Hz; rates 90 watts per channel minimum RMS power, with no more than 10% total harmonic distortion from 250 milliwatts to rated output.
96 Specifications (continued) Inputs VIDEO (AUDIO) IN: voltage 250 mV, (phono jacks) impedance 47 kilohms MD IN: voltage 450 mV, (phono jacks) impedance 47 kilohms MIC: sensitivity 1 mV, (mini jack) impedance 10 kilohms (Asian model only) Outputs MD OUT: voltage 250 mV (phono jacks) impedance 1 kilohms VIDEO OUT: max.
97 Additional Information Speaker Front Speaker: SS-ZX70DVD for MHC-ZX70DVD (North American and European models) Speaker system 3-way, bass-reflex type, magnetically shielded type Speaker units Woofer: 17 cm, cone type Tweeter: 5 cm, cone type Super Tweeter: 4 cm, cone type Nominal impedance 8 ohms Dimensions (w/h/d) Approx.
98 GLOSSAR Y Bit rate Value indicating the amount of video data compressed in a DVD per second. The unit is Mbps (Mega bits per second). 1 Mbps indicates that the data per second is 1,000,000 bits. The higher the bit rate is, the larger the amount of data.
99 Additional Information Parental Control A function of the DVD to limit playback of the disc by the age of the users according to the limitation level in each country. The limitation varies from disc to disc; when it is activated, playback is completely prohibited, violent scenes are skipped or replaced with other scenes and so on.
100 DVD/VIDEO CD/CD Remote Button(s) DVD N x X ./> (PREV/NEXT) m/M STEP c/C * SLOW t/T * D.SKIP Numeric buttons* DVD SETUP* RETURN O AUDIO* ANGLE* SUBTITLE* TITLE DVD MENU DVD DISPLAY* DISPLAY Function Starts playback. Stops playback. Pauses playback.
101 Additional Information Language Code List For details, see page 15, 47. The language spellings conform to the ISO 639: 1988 (E/F) standard. Code Language Code Language Code Language Code Language .
102 • To cancel the menu operation, press MODE SELECT. • The items with asterisk (*) cannot be selected depending on the situation. • Select “Mode End” to finish the menu operation. Items in “Sound Mode” and “Set Up Mode” The numbers in parenthesis denotes the page number for the item.
103 Additional Information Control Menu Item List Displayed during DVD playback. You can perform a search by using the numeric buttons to input a title number. Displayed during DVD playback. You can perform a search by using the numeric buttons to input a chapter number.
104 DVD and VIDEO CD only. You can view strobe playback as each video frame is displayed in succession on a screen divided into 9 sections. DVD only. You can see the beginning screen of each title on a DVD. As many as 9 titles can be displayed on the screen at once.
105 Additional Information DVD Setup Menu List You can set the following items with the DVD setup menu. The order of the displayed items may be different from the actual display.
106.
107 Additional Information.
Sony Corporation Printed in China Index Numeric 4:3 letter box 15 4:3 PAN SCAN 15 16:9 15 16:9/4:3 WIDE MODE 15 A A-B repeat 41 Adjusting the seat position 79 the sound 52, 75 speaker balance/level 11.
デバイスSony MHC-ZX70DVDの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Sony MHC-ZX70DVDをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSony MHC-ZX70DVDの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sony MHC-ZX70DVDの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sony MHC-ZX70DVDで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sony MHC-ZX70DVDを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSony MHC-ZX70DVDの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sony MHC-ZX70DVDに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSony MHC-ZX70DVDデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
