SonyメーカーMZ-E45の使用説明書/サービス説明書
ページ先へ移動 of 24
V er 1.1 1999.01 MICROFILM MZ-E44/E45 SERVICE MANUAL POR T ABLE MINIDISC PLA YER SPECIFICA TIONS US Model AEP Model UK Model A ustralian Model T our ist Model MZ-E44 E Model MZ-E44/E45 Model Name Usin.
– 2 – Specifications ........................................................................... 1 1. SER VICING NOTE ....................................................... 2 2. GENERAL Location and Function of Controls ..........................
– 3 – SECTION 2 GENERAL LOCA TION AND FUNCTION OF CONTROLS Headphones with Remote Control 2 7 6 3 1 5 4 8 !º 9 1 2 3 4 5 6 8 9 7 Main Unit 1 MD operate buttons ” • + (PLAY • FF ) = (REW ) p.
– 4 – SECTION 3 DISASSEMBL Y Note : Follow the disassembly procedure in the numerical order given. 3-1. UPPER P ANEL ASSY 3-3. MAIN BO ARD r The equipment can be removed using the following procedure. 3-2. BOTT OM P ANEL ASSY 1 3 2 Screws (M1.4) pan precision Upper panel ASSY Main section 2 Screws (M1.
– 5 – 3-4. BEL T ASSY , FRONT P ANEL ASSY 3-5. MECHANISM DECK SECTION 32 1 8 4 Boss Boss Main section 5 Belt ASSY 7 Claws Claw Boss Claws F ront panel ASSY 6 Screw (M1.
– 6 – 3-6. OPTICAL PICK-UP BLOCK ASSY 3 4 5 1 Screw precision 2 OP flexib le board Main shaft Chassis ASSY (MD section ) Optical pick-up b lock ASSY OP flexib le board Sheet (SW) 5 mm Optical pick-up ASSY r NO TE When replacing the optical block, the OP flexible board protec- tive sheet (SW) is necessary .
– 7 – SECTION 4 TEST MODE Outline • In this set, overall adjustment mode is made available by enter - ing test mode to perform automatic adjustment of CD and MO. In the overall adjustment mode, the disc is determined whether it is CD or MO and adjustments are performed in sequence.
– 8 – 2. Description of Each Mode 010 Offset adjustment Mode Description 011 FE offset 012 TE offset 013 All servo ON 020 Laser power adjustment Mode Description 021 MO power A 022 MO power E 023 .
– 9 – 060 Sled movement Mode Description 061 Sled in 062 Sled out 5 070 Automatic adjustment Mode Description 071 Focus search 072 Access 32 073 ADER check 074 Tracking sensitivity adjust 090 NV relation Mode Description 091 NV clear 092 Power OFF 093 Function code change A udio Mode • Enter the test mode and press the VOLUME – key .
– 10 – P o wer Mode • Enter the test mode and press the VOLUME – key . Then, press the ( key and the VOLUME – key in this turn to enter power mode.
– 11 – * Remote commander display during automatic adjustment 4. If result of automatic adjustment is OK, the following display appears. 5. If result of automatic adjustment is NG, the following display appears. * If NG, enter servo mode to perform automatic adjustment of the item determined as NG.
– 12 – Adjustment in Serv o Mode Method 1. When each adjustment mode is set according to the structure of servo mode, the lower two digits of the mode No. and the ad- justment value written in EEPROM are displayed and lit on the LCD on the remote commander .
– 13 – Pin No. Pin Name I/O Pin Description 1 – Not used (Fixed at “L” ). 2 UREG MON I Unreg voltage monitor input. 3 – Not used (Fixed at “L” ). 4 VREF I Reference voltage for power supply voltage adjustlment. 5 PLA Y KEY I Set PLA Y key input.
– 14 – Pin No. Pin Name I/O Pin Description 48 – Not used (Open). 49 – Not used (Open). 50 VDD – Digital power supply (+2.6V or +2.8V). 51 VPP – Power for on board light. 52 VSS – Digital ground. 53 SLD 1R CON O Sled motor control signal output.
– 15 – – 17 – – 16 – • Signal path. J : PLA Y 6-2. BLOCK DIA GRAM MZ-E44/E45.
– 18 – – 20 – – 19 – Ref. No. Location r Semiconductor Location D351 I-10 D352 H-11 D801 I-5 D841 F-10 D901 D-5 D902 H-14 IC301 C-7 IC302 D-7 IC501 H-12 IC551 G-14 IC552 F-14 IC601 F-12 IC603 F-6 IC801 C-13 IC802 C-15 IC901 E-4 Q501 I-12 Q551 G-3 Q552 F-3 MZ-E44/E45 6-3.
– 21 – – 22 – – 24 – – 23 – r Refer to page 25 f or IC Block Diagrams. 6-4. SCHEMA TIC DIA GRAM MZ-E44/E45 r W avef orms 2 1 4 IC601 $ª VOL T/DIV : 500mV AC TIME/DIV : 20nsec 3 800mVp-p 2.
– 27 – – 28 – – 25 – – 26 – MZ-E44/E45 r IC Block Dia grams IC301 B A3577FS-E2 IC552 TLC372CPWR IC601 µ PD63731GC-9EU MUTE BEEP 20 19 18 17 16 15 14 12 11 13 2 1 3 4 5 6 7 8 9 10 R/F .
– 29 – Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 51 3-703-502-11 SCREW 52 4-984-017-01 SCREW (1.7), T APPING 53 A-3293-984-A MAIN BOARD, COMPLETE 54 4-211-392-01 PLA TE, BLIND 55 3-335-797-91 SCREW (M1.
– 30 – 101 4-963-883-61 SCREW (M1.4), PRECISION PAN 102 4-982-563-01 SPRING, THRUST 103 1-666-784-13 FLEXIBLE (CL V) BOARD 104 4-963-883-21 SCREW (M1.
– 31 – NO TE : • Due to standardization, replacements in the parts list may be different from the parts specified in the diagrams or the components used on the set. • -XX, -X mean standardized parts, so they may have some difference from the original one.
– 32 – C914 1-126-246-11 ELECT CHIP 220uF 20% 4V C918 1-115-156-11 CERAMIC CHIP 1uF 10V C919 1-115-156-11 CERAMIC CHIP 1uF 10V < CONNECTOR > CN501 1-573-360-21 CONNECTOR, FFC/FPC 20P CN551 1.
– 33 – < SWITCH > S301 1-762-079-11 SWITCH, SLIDE (DIGITAL MEGABASS) S801 1-572-688-11 SWITCH, PUSH (1 KEY) (OPEN/CLOSE) S802 1-762-078-11 SWITCH, SLIDE (HOLD c ) S803 1-762-078-11 SWITCH, SLIDE (AVLS) < VIBRA TOR > X601 1-767-621-11 VIBRATOR, CERAMIC (16.
– 34 – MZ-E44/E45 9-924-929-12 Sony Corporation P ersonal A&V Pr oducts Company 99A0280-1 Printed in Japan © 1999.1 Published by Quality Engineering Dept.
デバイスSony MZ-E45の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Sony MZ-E45をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSony MZ-E45の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sony MZ-E45の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sony MZ-E45で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sony MZ-E45を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSony MZ-E45の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sony MZ-E45に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSony MZ-E45デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
