SonyメーカーPCG-FXA36の使用説明書/サービス説明書
ページ先へ移動 of 28
Conf idential PCG-FXA32/FXA33/ FXA35 / D /FXA36 SERVICE MANUAL NOTEBOOK COMPUTER 9-874-453-04 Lineup : PCG-FXA32 PCG-FXA33 PCG-FXA35/D PCG-FXA36 For American Area US Model Canadian Model S400 Illust :.
— 2 — PCG-FXA32/FXA33/ FXA35/D /FXA36 (AM) Inf ormation in this document is subject to change without notice. Sony and V AIO are trademarks of Sony . Intel logo and Intel Inside logo are registered trademarks of Intel Corporation. Pentium MMX is a trademark of Intel Corporation.
— 3 — T ABLE OF CONTENTS CHAPTER 1. REMO V AL 1-1. Flowc hart ......................................................................... 1-1 1-2. Main Electrical Parts Location Diagram ......................... 1-1 1-3. Remov al ...................
1-1 Conf idential PCG-FXA32/FXA33/ FXA35/D /FXA36 (AM) CHAPTER 1. REMO V AL 1-1. Flowc har t • P XX means pages that appears in this manual. • Remember that hard disk drives are easily damaged by vibration.
1-2 Conf idential PCG-FXA32/FXA33/ FXA35/D /FXA36 (AM) 1-3.Remo val 1. Assy Hood K eyboar d, Ke yboar d Unit 2. Lithium Battery , Combination Drive, D VD-ROM Drive 6 Assy Hood K eyboard 7 9 5 q; K eyb.
1-3 Conf idential PCG-FXA32/FXA33/ FXA35/D /FXA36 (AM) 3. Combination Drive, DVD-R OM Drive 1. FXA33/ FXA35 / D /FXA36 Model 2. FXA32 Model Claw 9 Assy Door DVD-RW (P A) 0 COMBO Drive 6 Bracket CD-ROM R 2 Bracket (CD-ROM L) 4 +B M2 (X2) (Gold) 1 +B M2 (X2) (Gold) 5 +B M2 (X2) (Gold) 7 Spring Drive (P A-R) 3 Spring Drive (P A) 8 Screw (M1.
1-4 Conf idential PCG-FXA32/FXA33/ FXA35/D /FXA36 (AM) 4. HDD , Door Battery 5. Assy P almrest, P ad T ouch, CNX-129 Board, Plate Palmrest, Bracket P ad 3 2 FPC 50Pin (f or HDD) 4 Door Batter y 1 Scre.
1-5 Conf idential PCG-FXA32/FXA33/ FXA35/D /FXA36 (AM) 6. Display Assy , Cover Hinge F our Claws qf Cov er Hinge qh Displa y Base qg Displa y Assy qa Screw M2X6 Special Head (Gold) 8 Screw (M2), 0 Number P3 Kind (Blac k) 9 Screw M2X6 Special Head (X2) (Gold) 5 Screw M2.
1-6 Conf idential PCG-FXA32/FXA33/ FXA35/D /FXA36 (AM) 7. Cooling Unit-2 8. PWS-14 Boar d, Latch Detector 4 Cooling Unit-2 Shield Sheet (F an) Shield T ape (F an) 2 2 3 MBX-61 Board CON14 1 Rotate the three screws that are b uilt together with the Cooling Unit-2.
1-7 Conf idential PCG-FXA32/FXA33/ FXA35/D /FXA36 (AM) ∗ 1 When removing the CPU, refer to “ 1-4. Replacing the CPU ” . ∗ 2 Card Modem can be removed from the bottom. Refer to the subsequent paragraph “ 10. Card Modem ” for more details. 9.
1-8 Conf idential PCG-FXA32/FXA33/ FXA35/D /FXA36 (AM) 10. Speaker Unit, SWX-74 Board 11. SO-DIMM 9 Speaker Unit Speaker Unit Hood K eyboard Hood K eyboard 5 SWX-74 Board 7 Speaker Unit 4 Screw M2X4 (.
1-9 Conf idential PCG-FXA32/FXA33/ FXA35/D /FXA36 (AM) 12. Card Modem (Remo ving from the bottom) 2 Door Modem 4 Card Modem 1 Screw M2X4 Special Head (Blac k) 3 Grip M2 (X2) (Black) 5.
1-10 Conf idential PCG-FXA32/FXA33/ FXA35/D /FXA36 (AM) 13. LCD Section – Made b y HI – 1. Assy Housing Bez el, LCD unit (15 inch) Assy Housing Bezel 15H-Z Assy Housing Displa y 15H-Z a Assy Housing Displa y 15H-Z : claw part 1 Cov er Screw Side (15) (X3) 5 Cov er Screw Lo wer 3 Cov er Screw Shaft 3 Cov er Screw Shaft 4 +P 2.
1-11 Conf idential PCG-FXA32/FXA33/ FXA35/D /FXA36 (AM) 2. In ver ter Unit, Harness LCD , FPC, Assy Housing Display 6 2 2 4 5 Inv er ter Unit 9 Assy Housing Displa y 15H-Z 8 HARNESS LCD 1 Screw M2X4 S.
1-12 Conf idential PCG-FXA32/FXA33/ FXA35/D /FXA36 (AM) 1-4.Replacing the CPU 1. Removing the CPU 2. Installing the CPU Attach the CPU while aligning the cut-out with this position. 1 Insert all pins of the replacement CPU into the holes of the base and push the CPU in the direction of the arrow .
1-13 Conf idential PCG-FXA32/FXA33/ FXA35/D /FXA36 (AM) 1-5. Replacing V arious Connectors on the MBX-61 Boar d Replace the connectors of “ 5-3. Connector Section ” as follows. 1. Removing the Brac ket I/O When removing the connectors of reference numbers 901, 902 and 903 (refer to page 5-7), remove the bracket I/O first.
1-14 Conf idential PCG-FXA32/FXA33/ FXA35/D /FXA36 (AM) 1-6. DIP Switch Setting of the MBX-61 Boar d Set the DIP switch on the MBX-61 board (main board) to match with the LCD that is used in this computer . (END) Part No. of LCD 1-476-186-12 A-8025-245-A DIP switch setting The upper position where ON indication is shown is the ON position .
2-1 Conf idential PCG-FXA32/FXA33/ FXA35/D /FXA36 (AM) CHAPTER 2. SELF DIA GNOSTICS Please confirm “ Self Diagnostics ” method which will be informed you with distribution of “ Self Diagnostics ” software.
Conf idential PCG-FXA32/FXA33/ FXA35/D /FXA36 (AM) (END) 3-2 3-1 CHAPTER 3. BLOCK DIA GRAM Port Replicator PCI BUS CLK GEN ICS9248BF-168 CPU CLOCK PCI CLOCK USB CLOCK Serial DSUB-9 Parallel DSUB-25 PS.
Conf idential PCG-FXA32/FXA33/ FXA35/D /FXA36 (AM) (END) 4-2 4-1 CHAPTER 4. FRAME HARNESS DIA GRAM KEY BOARD DC F AN CPU VIDEO OUT EXTERNAL MICROPHONE HEADPHONE IEEE 1394 i.
5-1 CHAPTER 5. EXPLODED VIEWS AND P ARTS LIST NO TE: • The mechanical par ts with no ref erence number in the exploded vie ws are not supplied. • Items marked “ * ” are not stock ed since they are seldom required f or routine service. Some delay should be anticipated when ordering these items.
5-2 Conf idential PCG-FXA32/FXA33/ FXA35/D /FXA36 (AM) Ref.No. Part No. Description Ref.No. Part No. Description 5-1. Main Section 1 X-4623-848-1 [CH]...ASSY BOTTOM (Q) 3 4-640-837-22 DOOR BATTERY * 8 4-651-706-01 HEATSINK BOTTOM * 11 4-656-752-01 [CH].
Conf idential PCG-FXA32/FXA33/ FXA35/D /FXA36 (AM) 5-3 5-4 166 163 41 Supplied with 88 Supplied with 19 Supplied with 88 B3 161 165 193 192 162 161 C B8 B3 B3 B8 B8 78 24 B15 B15 46 E E F F I D C N N .
Conf idential PCG-FXA32/FXA33/ FXA35/D /FXA36 (AM) 5-1-A. FDD Section How to use pr operly the FDD repair parts. T ypes of service to be provided are dif ferent depending on the serial No. of the FDD in use. The service types are sho wn belo w depending on the serial No.
Conf idential PCG-FXA32/FXA33/ FXA35/D /FXA36 (AM) Ref.No. Part No. Description 5-5 5-6 Ref.No. Part No. Description The components identified by mark 0 or dotted line with mark 0 are critical for saf ety . Replace only with part number specified. Les composants identifi é s par une marque 0 sont critiques pour la s é curit é .
Conf idential PCG-FXA32/FXA33/ FXA35/D /FXA36 (AM) Ref.No. Part No. Description 5-2-A. LCD Section (FXA35/D Model) – Made b y HI – NO TE : Set the DIP switch on the MBX-61 board (Main board) to match with the LCD (A-8025-245-A) that is used in this computer .
Conf idential PCG-FXA32/FXA33/ FXA35/D /FXA36 (AM) 5-7 5-8 (END) 5-3. Connector Section ∗ Before replacing the connector of reference number 901, 902 and 903, remove the bracket I/O. For the disassembling procedure, refer to page 1-13. 901 1-779-745-21 JACK, DC DC IN connector 902 9-885-018-97 CONNECTOR (1.
Revision Histor y Suffix Ver. Date Contents QM No. -01 Ver. 1 2001.10.03 First Edition -02 Ver.2 2002.01.07 M2002_001K Page 5-4, Page 5-6(a), Page 5-6(b), Back Cover -03 Ver.3 2002.03.20 Page 5-3 N2002_020K -04 Ver.4 2002.03.26 Page 5-2, Page 5-4(a) Page 5-4(b) N2002_040K < Remarks > 2001.
デバイスSony PCG-FXA36の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Sony PCG-FXA36をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSony PCG-FXA36の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sony PCG-FXA36の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sony PCG-FXA36で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sony PCG-FXA36を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSony PCG-FXA36の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sony PCG-FXA36に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSony PCG-FXA36デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。