SonyメーカーPEGA-VR100Kの使用説明書/サービス説明書
ページ先へ移動 of 52
V ideo Recor der Operating Instructions 2003 Sony Corporation PEGA-VR100K 4-679-184- 11 (1).
2 WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
3 • Copyright laws prohibit reproducing the software or the manual accompanying it in whole or in part, or renting the software without the permission of the copyright holder.
4 On placement • Place the Video Recorder in a location with adequate ventilation to prevent heat build-up in the Video Recorder. • Do not place the Video Recorder in a confined space such as a bookshelf or similar unit.
5 10. Protect the power cord from being walked on, rolled over, or pinched, particularly at the plug, convenience receptacle, and point of exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the sold with the apparatus.
6 Table of contents WARNING ............................................. 2 Before use ............................................... 3 Precautions ............................................. 3 Getting Started Features .............................
7 Getting Started Getting Started Features This Video Recorder contains a TV tuner and can record a TV program on “Memory Stick” media. continued CLIÉ handheld “Memory Stick” media CLIÉ handheld Video Recorder 1 Insert a “Memory Stick” media into your CLIÉ handheld.
8 Notes • You have to install Video Utility on your CLIÉ handheld from the supplied Installation CD-ROM to set a timer REC preset. • You cannot use this Video Recorder to play back recordings made on “Memory Stick” media.
9 Getting Started Unpacking Please check that all the following accessories are included in the package before you start setting up the Video Recorder. If any item is missing, contact the Sony Customer Information Service Center or the Sony dealer where you bought this Video Recorder.
10 Guide to Parts Front panel 1 PO WER indicator Lights up in green after blinking momentarily after the power has been turned on. 2 1 (power) Turns the Video Recorder on and off. 3 Displa y Changes the information of the front panel display as follows: 4 SET Press and hold momentarily to activate clock setting mode.
11 Getting Started Front panel display 1 Reset Push to reset the Video Recorder. Notes • When you reset, do not push the Reset button using a sharp pointed object. Use the stylus or similar object. • When you reset, the Video Recorder returns to the default setting.
12 Basic Hookups and Settings Quick Overview This quick overview will give you enough information to start using the Video Recorder. Step 1: Connecting the Antenna Cable (page 13) Connecting the VHF/U.
13 Basic Hookups and Settings Step 1: Connecting the Antenna Cable Select one of the following antenna hookups to record a TV program: Hookup 1 For antenna only (page 14) Hookup 2 For a connected sign.
14 Hookup 1: Connecting the antenna only Use this hookup to connect a VHF/UHF antenna (or separate VHF and UHF antennas) to the video recorder. Use an antenna cable to connect the signal source coming from your wall to the VHF/UHF IN jack on the Video Recorder.
15 Basic Hookups and Settings 3 Use the supplied antenna cable to connect the splitter’s other output jack to the VHF/UHF IN jack on the Video Recorder.
16 3 Use an antenna cable (not supplied) to connect the splitter’s other output jack to the RF IN on your cable box. 4 Use the supplied antenna cable to connect the RF OUT on your cable box to the VHF/UHF IN jack on the Video Recorder.
17 Basic Hookups and Settings Step 2: Connecting to Other Equipment with the Audio/Video Cable If you want to input or output signals to other equipment (e.g., a TV, VCR, or satellite receiver) using the audio/video cable (supplied), refer to the following connections.
18 Step 3: Connecting the AC Power Adapter AC power adapter Connecting a VCR or satellite receiver (Input a signal from other equipment) When you connect to other equipment, you can do the following: • Record a signal from other equipment (VCR or satellite receiver, etc.
19 Basic Hookups and Settings 1 Connect the AC power adapter to the DC IN connector of the Video Recorder. 2 Connect the AC cord to the AC power adapter ( 1 ), then plug the AC cord into a wall outlet ( 2 ). Notes • The clock blinks in the front panel display when you turn on the Video Recorder for the first time.
20 Step 4: Turning the Video Recorder on and off Press 1 (power) on the Video Recorder. The Video Recorder turns on, and the POWER indicator blinks momentarily and then stays lit in green. The Video Recorder cannot be operated while the POWER indicator is blinking.
21 Basic Hookups and Settings 7 Press CHANNEL+/– to select the minute, then press SET. The minute is set. The clock starts and the time is displayed.
22 Note If you want to use more than one CLIÉ handheld, you need to install this utility on each CLIÉ handheld. 4 Click [DONE]. Click [OK] when the Confirmation dialog box is displayed. The Install CD-ROM window is displayed. 5 Click [Exit] on the Install CD-ROM window.
23 Basic Hookups and Settings 2 Tap (Video Util) on the CLIE Launcher. The welcome message on the Video Utility screen is displayed. Note When you tap (Video Util) for the first time, a welcome message appears on the screen.
24 When you change to here, the channels you select are displayed in [Channel] in the Video Utility screen for [ New Preset ] and also in the front panel display of the Video Recorder. 5 Tap [Channels]. The Available channels screen is displayed. 6 Tap a channel you want to receive by changing to in the Available channels screen.
25 Basic Hookups and Settings 9 Remove the “Memory Stick” media from your CLIÉ handheld. Note Do not remove the “Memory Stick” media from your CLIÉ handheld while the “Memory Stick” LED is lit. 10 Press 1 (power) on the Video Recorder. The Video Recorder turns on, and the POWER indicator blinks momentarily and then stays lit in green.
26 Operations Setting a Timer REC Preset You can set, edit, or delete a timer REC preset using Video Utility . You can also set the same timer REC preset on other “Memory Stick” media. Note The Video Recorder performs timer recordings using timer REC preset settings specified on a “Memory Stick” media.
27 Operations 1 T ap here to displa y a drop-down menu. Select “REC Time”, “Title”, or “REC Mode” (recording mode and sound). 2 Displa ys the timer REC presets in the backup list of your CLIÉ handheld.
28 3 Tap [New]. The Video Utility screen for [ New Preset ] is displayed. 4 Tap next to 1 [Date]. The Date screen is displayed. Setting a timer REC preset Follow the procedure below to set a new timer REC preset using Video Utility . 1 Insert a “Memory Stick” media into your CLIÉ handheld.
29 Operations 5 Tap the date you want to record. The date you select is displayed next to [Date] in the Video Utility screen for [ New Preset ]. 6 Tap next to 2 [Time]. The Time screen is displayed. 7 Tap v or V to set the hour and minute of [Start] and [End], then tap [OK].
30 z Hint The recording time is changed de pending on the [REC Mod e] you select. If the whole program cannot be recorded due to lack of storage space on the “Memory Stick” media, the maximum recordable time is displayed in the Video Utility screen for [ New Preset ].
31 Operations REC Mode Sound HQ (High Quality) SP (Standard Play) LP1 (Long Play 1) LP2 (Long Play 2) Stereo Stereo (SAP)* Stereo Stereo (SAP)* Mono (L+R) Mono (L) Mono (R) Mono (SAP)* Stereo Stereo (.
32 z Hints • To set other timer REC presets, tap [New] and follow steps 3 to step 13. • You can have up to 100 presets in the backup list of your CLIÉ handheld, and up to 20 on a “Memory Stick” media.
33 Operations Insert a “Memory Stick” media with the arrow up and facing the Video Recorder. continued Notes • The Video Recorder cannot record a timer REC preset if the Video Recorder is already turned on (the POWER indicator lit) at the scheduled preset time.
34 Setting a timer REC preset before inserting a “Memory Stick” media into your CLIÉ handheld You can set a timer REC preset using Video Utility and store it on your CLIÉ handheld first, then add the preset to a “Memory Stick” media later. Follow the procedure below to set a timer REC preset using this method.
35 Operations Editing/deleting a timer REC preset Follow the procedure below to edit or delete a timer REC preset. 1 Insert a “Memory Stick” media into your CLIÉ handheld. 2 Tap (Video Util) on the CLIE Launcher. The Video Utility screen is displayed.
36 Note Timer REC presets in the backup list of your CLIÉ handheld (top frame) will not be deleted. z Hint You can delete the timer REC preset in the backup list of your CLIÉ handheld (top frame) with the same procedure.
37 Operations continued Guide to Video Utility menu This section explains each menu of Video Utility . For details on other common menus of CLIÉ applications, refer to the “Handbook” of CLIÉ handheld. Preset Deleting All (Handheld) Delete All (MS) Copy.
38 Options Setup Error Log About Video Utility Changes the settings for [Antenna] and [Channels]. Displays error information of “Memory Stick” media.
39 Operations HQ (High Quality) SP (Standard Play) LP1 (Long Play 1) LP2 (Long Play 2) Recording TV Programs Manually Follow the procedure below to record a TV program without setting the timer REC preset. 1 Press 1 (power) on the Video Recorder. The POWER indicator blinks momentarily and then stays lit in green.
40 To cancel recording Press x STOP. The REC indicator blinks momentarily and then turns off when recording is finished. Note When you press x STOP, recording continues on the “Memory Stick” media for approximately one minute and the “Memory Stick” indicator remains lit.
41 Operations Playing Back Recordings You can play a TV program recorded by this Video Recorder using Movie Player on your CLIÉ handheld. Follow the procedure below to operate. For details on Movie Player , refer to “Movie Player” in the “CLIÉ Application Manual” installed on your computer.
42 3 Tap (Movie Player) on the CLIE Launcher. The Movie Player screen is displayed. 4 Tap 1 ,the Movie file format button, and select the file format that you want to display on the screen. Tap 2 ,the movie file that you want to play from the list. The playback screen appears and playback starts.
43 Additional Inf ormation Additional Information Troubleshooting Read this Troubleshooting section before calling Sony Customer Information Services Center. If the problem persists even after reading this section, check our official Sony CLIÉ website (URL on back page).
44 The timer REC preset is not complete. The confirmation message “The new timer REC preset starts at the end of another preset in the Memory Stick. Do you want to update the recording of the earlier preset to stop recording 1 minute earlier?” is displayed.
45 Additional Inf ormation TV A TV program via the Video Recorder’s VHF/UHF IN jack does not appear on the TV screen. The picture is not clear or only black- and-white. You move to a new area. The sound is noisy. c Connect the antenna cable or cable TV cable correctly.
46 Self-diagnosis Function (When letters/numbers appear in the display) When the self-diagnosis function is activated to prevent the recorder from malfunctioning, a combination of a letter and two numbers, or the “Memory Stick” media status symbol appears in the front panel display.
47 Additional Inf ormation “Memory Stick” Remedy media status symbol An unusable “Memory Stick” media is inserted. c The “Memory Stick” is not formatted properly for use with this Video Recorder. Change to another “Memory Stick” media.
48 Specifications System Video recording (movie compression) system MPEG4 simple profile Audio recording (audio compression) system MPEG AAC-LC Recording format Movie Player format High Quality (HQ), .
49 Additional Inf ormation Input and output terminals Antenna input 75-ohm antenna terminal for VHF/UHF LINE IN (video input) Phono jack × 1, 1Vp-p (75 ohms unbalanced) LINE IN (audio input) Phono ja.
.
.
Printed in Japan Printed on 100% recycled paper using VOC (Volatile Organic Compound)-free vegetable oil based ink. For the latest information on support and accessories, c heck our official Son y CLIÉ website http://www.
デバイスSony PEGA-VR100Kの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Sony PEGA-VR100Kをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSony PEGA-VR100Kの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sony PEGA-VR100Kの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sony PEGA-VR100Kで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sony PEGA-VR100Kを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSony PEGA-VR100Kの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sony PEGA-VR100Kに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSony PEGA-VR100Kデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
