SonyメーカーPFV-SP3300の使用説明書/サービス説明書
ページ先へ移動 of 16
SIGNAL PROCESSING UNIT PFV-SP3300 BACKUP POWER SUPPLY UNIT HK-PSU03 INST ALLA TION MANUAL 1st Edition Serial No. 10001 and Higher (PFV -SP3300) Serial No.
PFV -SP3300 ! W ARNING This manual is intended f or qualified ser vice personnel only . T o reduce the risk of electr ic shoc k, fire or injur y , do not perform any ser vicing other than that contained in the operating instructions unless you are qualified to do so.
1(E) PFV -SP3300 Table of Contents Manual Structure Purpose of this manual ........................................................................................ 2 (E) Related manuals .................................................................
2 (E) PFV -SP3300 Manual Structure Purpose of this manual This manual is the installation manual of Signal Processing Unit PFV-SP3300 and its Backup Power Supply Unit HK-PSU03. This manual is intended for use by trained system and service engineers, and describes the information for installation of the unit.
1-1 (E) PFV -SP3300 Section 1 Installation 1-1. Operating Environment Operating temperature + 5 d C to + 40 d C Performance temperature + 10 d C to + 35 d C Humidity 10 to 90 % (No condensation) Mass: PFV-SP3300 Approx. 10 kg (Without the optional unit and board) HK-PSU03 Approx.
PFV -SP3300 1-2 (E) 1-3. Installation Space m . Do not block the ventilation holes of the unit. . Both of the front and rear sides must be at least 20 cm away from the walls for ventilation and mainte- nance. The outer dimensions of PFV-SP3300 are as shown here: 1-3.
1-3 (E) PFV -SP3300 1-4. Installing/Removing Optional Power Supply Unit w Before installing the backup power supply unit HK-PSU03 in PFV-SP3300, set the power switch of HK-PSU03 to the “O” position (OFF). Otherwise, deterioration of a connector which connects HK-PSU03 to PFV-SP3300 may cause a fire.
PFV -SP3300 1-4 (E) 4. Insert the main board fully into the slot along the board guides and close the board lever in the direction indicated by arrow 1 . 5. Stick the slot label supplied with the PFV-SP3300 onto the board lever. n Attach the supplied slot label to the position shown in the figure.
1-5 (E) PFV -SP3300 Installing Connector Panel (Rear side) The connector panel must be installed to the slot which contains the main board. 1. Remove the two screws and remove the blank panel of the slot which contains the main board. n Keep the removed blank panel and two screws.
PFV -SP3300 1-6 (E) 1-6. Rack Mounting n Install a ventilating fan in the rack to prevent the increase in the temperature inside a rack when multiple units are put in one rack. 1-6-2. Rack Mounting Procedure Explains the procedure for rack mounting by Rack Mount Kit RMM-10.
1-7 (E) PFV -SP3300 n The maximum depth of an adaptor is 750 mm. The minimum depth of an adaptor is 595 mm. 3. Firmly lay the right and left adaptors in the rack with the specified six screws. (Following figure is case of left side.) 4. Fasten the length adjustment screws which are loosened in step 2.
PFV -SP3300 1-8 (E) 1-7. Matching Connector/Cable When external cables are connected to the connectors on the PFV-SP3300 rear panel, the hardware listed below (or the equivalent) must be used.
2-1 (E) PFV -SP3300 Section 2 Service Overview 2-1. Cleaning the Filter w Be sure to turn off the power switch and disconnect the power cord from the outlet before starting any work. c . The temperature inside the unit increases if dust adheres to the filter and the ventilation holes are blocked.
.
PFV -SP3300 The material contained in this manual consists of inf ormation that is the proper ty of Sony Corporation. Sony Corporation e xpressly prohibits the duplication of any portion of this manua.
Printed in Japan Son y Cor poration 2000. 8 22 Communication System Solutions Netw ork Company ©2000 HK-PSU03 (SY) PFV -SP3300 (SY) J, E 3-204-888-01.
デバイスSony PFV-SP3300の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Sony PFV-SP3300をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSony PFV-SP3300の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sony PFV-SP3300の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sony PFV-SP3300で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sony PFV-SP3300を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSony PFV-SP3300の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sony PFV-SP3300に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSony PFV-SP3300デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
