SonyメーカーRCD-W3の使用説明書/サービス説明書
ページ先へ移動 of 24
©2002 Sony Corporation Operating Instructions Owner’s Record The model and serial numbers are located on the rear panel. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product.
2 WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
3 ES F P Precautions On safety • Should any solid object or liquid fall into the cabinet, unplug the recorder and have it checked by qualified personnel before operating it any further. • The use of optical instruments with this product will increase the risk of eye hazard.
4 Contents Getting Started Unpacking ............................................. 5 Hooking Up the System ........................ 5 This Recorder Can Use the Following Discs ................................................ 6 Basic Operations Playing a CD .
5 Getting Started Started Unpacking Check that you received the following items: • Audio connecting cord (2) • Remote commander (remote) (1) • Size AA (R6) batteries (2). Inserting batteries into the remote You can control the recorder using the supplied remote.
6 Hookups Connecting the recorder to an amplifier Connect the amplifier to the ANALOG IN/ OUT jacks using the audio connecting cords (supplied), making sure to match the color- coded cords to the appropriate jacks on the components: red (R) to red and white (L) to white.
7 Basic Operations 1 Turn on the amplifier and set the source selector to the recorder. 2 Press POWER. 3 Press A and place a disc on the inner circle of DECK A (or B). Press A again to close the disc tray. 4 Press H . The recorder starts playing. Adjust the volume on the amplifier.
8 Using the display When you check the total number of tracks and total playing time of the disc while the recorder is stopped, the information appears as follows: DECK A TIME DECK B Using the TIME bu.
9 Basic Operations The TOC indicator When you put an unfinalized CD-R disc or CD- RW disc in the disc tray, the TOC indicator lights up. For details on finalizing, refer to page 19, and page 20 for unfinalizing. Note When you put a CD or finalized CD-R disc in a disc tray, the CD indicator lights up as “CD.
10 Locating a Specific T rack You can quickly locate any track while playing a disc by using the AMS . and > (Automatic Music Sensor) on the deck, . and > buttons on the remote, or number buttons on the remote. Before using the remote, set SELECT to CD for operations on DECK A, or to CDR for operations on DECK B.
11 Basic Operations Locating a Particular Point in a T rack You can also use the m and M buttons to locate a particular point in a track during playback or playback pause. Before using the remote, set SELECT to CD for operations on DECK A, or to CDR for operations on DECK B.
12 Playing in Random Order (Shuffle Play) You can have the recorder “shuffle” tracks and play them in random order. Before using the remote, set SELECT to CD for operations on DECK A, or to CDR for operations on DECK B.
13 Basic Operations To erase the last programmed track Press CLEAR on the remote. Each time you press the button, the last programmed track is erased. Tip The program remains even after Program Play ends. When you press H , you can play the same program again.
14 Recording a CD to CD-R or CD-RW disc at Normal Speed (Normal Speed Synchro-Recording) You can easily make digital recordings from a CD to a CD-R, or CD-RW, making track numbers in the same sequence as the original CD. Before recording, see “Notes” on page 16.
Recording on CDR 15 Recording a CD to CD-R or CD-RW disc at High Speed (High Speed Synchro-Recording) You can easily make digital recordings from a CD to a CD-R, or CD-RW, faster than normal Synchro-Recording, making track numbers in the same sequence as the original CD.
16 Notes • You cannot record over existing material. The recorder automatically starts recording from the end of the existing material. • Make sure that the remaining recordable time on the CD-R or CD-RW is longer than the playing time of the CD, especially if you want to record all the tracks on the CD.
Recording on CDR 17 Select OPTICAL ANALOG 5 Adjust the recording level (ANALOG IN only), if necessary. For details, see “Adjusting the Recording Level” on page 18. 6 Press H . 7 Start playing the sound source you want to record. To pause recording Press X .
18 The “OVER” indicator If rec level is too loud, “OVER” appears in the front panel. The SRC indicator Adjusting the Recording Level (ANALOG IN only) You can adjust the recording level using the REC LEVEL control on the front panel. Adjust the recording level so that the “OVER” indicator on the level is not normally appears.
Recording on CDR 19 Finalizing a CD-R or CD- RW disc Finalizing completes the recording of a disc. It enables you to play the disc on other players. (The player must be CD-RW compatible. ) When a recording is finished, a CD-R or CD- RW disc must be finalized.
20 Unfinalizing a CD-RW disc A CD-RW disc is both recordable and rewritable. However, the process of rewriting or erasing is different from of cassette tapes. Unfinalizing a CD-RW disc A finalized CD-RW is neither recordable nor rewritable. If you want to add new tracks or erase single tracks, you must first unfinalize the disc.
Recording on CDR 21 Erasing a single track of CD-RW disc You can erase one track on a CD-RW at a time. This process starts with the last track on the disc. Please note that before erasing a track, you must unfinalize the disc. If the disc is not unfinalized, follow the instructions of “Unfinalizing a CD-RW disc” (page 20).
22 Explanation • A record-related button has been pressed when a finalized disc is in the DECK B. • A record-related button has been pressed when a standard CD is in the DECK B. A non-audio CD-ROM or a CD- Video disc has been placed in the machine.
23 Additional Information The sound has a lot of static. Strong magnetism from a television or a similar device is interfering with operations. Move the recorder away from the source of strong magnetism. Other No sound is output. • Make the connections properly.
24 Specifications DECK A (the CD player section) System Compact disc and digital audio system Laser Semiconductor laser ( λ = 780 nm) Emission duration: continuous Frequency response 20 Hz – 20,000 Hz (±0.
デバイスSony RCD-W3の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Sony RCD-W3をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSony RCD-W3の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sony RCD-W3の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sony RCD-W3で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sony RCD-W3を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSony RCD-W3の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sony RCD-W3に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSony RCD-W3デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
