SonyメーカーRM-AX4000の使用説明書/サービス説明書
ページ先へ移動 of 96
Operating Instructions RM-AX4000 Integrated Remote Commander © 2005 Sony Corporation To go to the section y ou want to read, clic k the title in the PDF Bookmarks, the title in the “T able of Contents” of the Operating Instructions, or the page in the sentences.
2 W ARNING To prevent fir e or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only . WARNING Y ou are cautioned that any changes or modifications not expressly appr oved in this manual could void your authority to operate this equipment.
3 Declaration of Conformity T rade Name: SONY Model No.: RM-AX4000 Responsible Party: Sony Electronics Inc. Address: 16450 W . Bernardo Dr , San Diego, CA 92127 USA T elephone No.
4 F eatur es The RM-AX4000 Remote Commander provides centralized contr ol of all your AV components fr om a single r emote control and saves the tr ouble of operating differ ent A V components with differ ent r emote contr ol devices. The following are its main features.
5 Learning function lets you program other remote contr ol signals you may need The Remote Commander ’s learning function can learn the remote contr ol infrared signals of non-pr eset components. The Remote Commander can learn remote contr ol signals (infrared signals only) of other devices such as air conditioners, lights, etc.
6 T able of Contents Getting Started Unpacking ............................................................................................................................. 8 Location and function of controls ..........................................
7 Setting by On-Remote Setup Setting the preset codes ..................................................................................................... 45 Using non-preset remote contr ol operations – Learning function ..........................
8 Getting Started Unpacking Check the contents of the package before using the Remote Commander . • Remote Commander RM-AX4000 (1) • USB mini cable (1) • CD-ROM for the AX Remote Editor software.
9 Getting Star ted 5 XPRESS button (pages 22-24) The XPRESS names appear as the Label keys. When you press an XPRESS name, the operating display for that XPRESS function appears, and its macro is performed. 6 MENU button (pages 76-87) Calls up the menu screen for components that have menu function.
10 Installing the batteries Slide and open the battery compartment lid and insert four size AA (R6) alkaline batteries (not supplied). Be sure to line up the + and – of the batteries with the + and – of the battery compartment. When to replace the batteries When replacing the batteries, do it quickly.
11 Getting Star ted Setting the clock When you install batteries the first time, the Remote Commander enters clock setup mode. “DS_TIME” appears as the Display title.
12 4 Set the hour and AM (or PM) by pressing the F or f button. The selected hour and AM (or PM) flash. Next, press the g button. The hour and AM (or PM) are set. “00” (minute) and “SET” flash. CLOCK SU AM LEARN NG SET STD_TIME Note If you press the G button, the hour and AM (or PM) are set and the setting mode r eturns to step 3.
13 Getting Star ted Remote Commander settings and oper ating procedur es About the factory setting The Remote Commander (RM-AX4000) is preset at the factory to operate most Sony brand A V components (see the table below). If you operate a non-Sony A V component, you need to set the component’s preset code on the Remote Commander first.
14 Programmable items of On-PC Setup and On-Remote Setup * 1 System Control function is used to perform a programmed series of commands (a macro) on several A V components by pressing just one button. * 2 An XPRESS function is also a macro function which executes a series of commands for controlling several A V components by pressing just one key .
15 Getting Star ted When using On-PC Setup If you set up the Remote Commander using On-PC Setup, you do not need to r ead this PDF manual “Setting by On- Remote Setup”. (pages 45 – 69) Setting procedur e for On- Remote Setup If you set the Remote Commander On- Remote Setup, follow the procedur e below .
16 Installing the “ AX Remote Editor” By installing the “AX Remote Editor” software on the supplied CD-ROM onto your PC, you can set up the Remote Commander with your PC.
17 Getting Star ted 4 Click [Next]. Follow the on-screen instructions and proceed with the installation. When the installation is complete, “AX Remote Editor 1.0 Setup” automatically quits. Tip If the installation display is hidden behind other windows If “AX Remote Editor 1.
18 For Windows XP users 1 Close all software r unning on Wi ndows. 2 Insert the supplied CD-ROM into the CD-ROM drive of the PC. After a moment, “InstallShield W izard” of “AX Remote Editor” appears. 3 Click [Cancel] to close “InstallShield W izard” of “AX Remote Editor .
19 Getting Star ted 8 Click [Next]. Installing of the USB driver starts. The “Completing the Found New Hardwar e W izard” display appears when the installation is complete.
20 Starting up “ AX Remote Editor” On your PC, click the W indows “Start” button and point to “All Programs” - “Sony Remote AX,” - “AX Remote Editor” and click. “AX Remote Editor” starts up, and the last project appears. The first time AX Remote Editor starts up, the “New Project” wizar d appears.
21 Operating the Remote Commander Operating the Remote Commander Operating your components There ar e two ways to operate the components on the Remote Commander (RM-AX4000). • XPRESS operation: Y ou can operate multiple A V components related to a specific task, such as “watching a TV , ” or “watching a DVD,” etc.
22 Operating the XPRESS function EPG MENU SYSTEM CONTROL OK 1 MORE 4 3 COMPONENT VOLUME BACK X PRESS 2 RECALL LIGHT TIMER MUTING SYNC-UP CHANNEL EXIT TOOLS ALL OFF LEARN NG OFF COMMANDER When you press an XPRESS button on the Remote Commander , the XPRESS names appear at the bottom of the display .
23 Operating the Remote Commander Example: T o play a DVD player by XPRESS function (when On-PC Setup was used to set up the Remote Commander) 1 Press the XPRESS button.
24 Example: T o play a DVD player by XPRESS function (when On- Remote Setup was used to set up the Remote Commander) 1 Press the XPRESS button. X PRESS “XPRESS” appears as the Display title. XPRESS /1 SU AM LEARN NG TV A-CBL D-SAT DVD If a page number such as “/1” appears to the right side of Display title, multiple pages are available.
25 Operating the Remote Commander 5 Press the key(s) or button(s) you want to operate. When the signal is sent, appears. Y ou can also use other buttons, such as the VOLUME +/–, CHANNEL +/–, MUTING, cursor , and MENU buttons. 6 When you are finished using the Remote Commander , press the COMMANDER OFF button.
26 2 Press the DONE key . DONE The component’s (ON/OFF) power status is synchronized with the Remote Commander . 3 When you are finished using the Remote Commander , press the COMMANDER OFF button. OFF COMMANDER The Remote Commander turns off. If you want to return to the previous display Press the BACK button, the pr evious LCD display returns.
27 Operating the Remote Commander Operating components individually EPG MENU SYSTEM CONTROL OK 1 MORE 4 3 COMPONENT VOLUME BACK X PRESS 2 RECALL LIGHT TIMER MUTING SYNC-UP CHANNEL EXIT TOOLS ALL OFF LEARN NG OFF COMMANDER When you press the COMPONENT button on the Remote Commander , the component names appear at the bottom of the display .
28 2 Press the component name you want to operate (in this case, TV). TV The component name appears as the Display title. And the keys you use to control the TV are displayed as T ouch-keys.
29 Operating the Remote Commander To contr ol the volume EPG MENU SYSTEM CONTROL OK 1 MORE 4 3 COMPONENT VOLUME BACK X PRESS 2 RECALL LIGHT TIMER MUTING SYNC-UP CHANNEL EXIT TOOLS ALL OFF LEARN NG OFF COMMANDER Press the VOLUME +/– buttons to control the volume, and the MUTING button to silence.
30 How to set the Timer function For On-PC Setup: See the Help menu provided in “AX Remote Editor .” For On-Remote Setup: See “Setting the T imer” on page 59. To quickly switch the Timer on or off W ith the Remote Commander (RM- AX4000), you can quickly switch a T imer function on or off.
31 Operating the Remote Commander If you want to quit before finishing Press and hold the COMMANDER OFF button for more than 2 seconds. The pr evious status r eturns, and the Remote Commander turns of f. If you want to return to the previous display Press the BACK button or the COMMANDER OFF button, the previous LCD display r eturns.
32 Notes • If the r emote control detectors of the components are too far apart, or if something is blocking them, some of the components may not operate in the ordered sequence when you press a SYSTEM CONTROL button or System Control key .
33 Operating the Remote Commander Locking the controls – Hold function To prevent accidental operation, you can lock all the buttons with the Hold function. However , any programmed T imer functions will still be activated while the controls ar e locked.
34 Unit Settings Setting the backlight The LCD display’s backlight is preset at the factory to activate whenever the Remote Commander (RM-AX4000) is operated, and to switch off automatically if you do not operate for more than 10 seconds.
Unit Settings 35 5 Press the BACK button or the COMMANDER OFF button. BACK or OFF COMMANDER “LIGHT” appears as the Display title. LIGHT SU LEARN NG OFF_TIME LEVEL FADE ON_MODE Note When you set the automatic-off time to longer than 10 seconds (factory setting), the battery life may be shorter .
36 10 Press the ON or OFF key to select the fade effect of the backlight. ON: fade in/out backlight OFF: normal backlight The fade effect of the backlight changes and a beep sounds each time you press the keys. 11 Press the BACK button or the COMMANDER OFF button.
Unit Settings 37 If you want to quit before finishing Press and hold the COMMANDER OFF button for more than 2 seconds. The pr evious status r eturns, and the Remote Commander turns of f. If you want to return to the previous display Press the BACK button or the COMMANDER OFF button, the previous LCD display r eturns.
38 2 Press “DISPLA Y” on the Label keys. DISPLAY “DISPLA Y” appears as the Display title. DISPLAY SU LEARN NG DISP-OFF ALIGN CONTRAST 3 Press ”DISP-OFF” on the Label keys. DISP - OFF The setting display for automatic-off time of the LCD display appears.
Unit Settings 39 Calibrating the alignment of the LCD display Y ou can calibrate the alignment of the LCD display if the T ouch-keys are not working properly . To change this setting, perform the following procedur e. 1 While pressing the COMMANDER OFF button, press the MENU button and EXIT button.
40 Setting the contrast of the LCD display Y ou can adjust the contrast of the LCD display if the screen is not viewed properly . To change this setting, perform the following procedur e. 1 While pressing the COMMANDER OFF button, press the OK button.
Unit Settings 41 3 Press “BEEP” on the Label keys. BEEP The setting display for beep appears. The current setting is shown inside the [ ], while the other flashes. OTHER SU LEARN NG BEEP [ ON ] OFF 4 Press the ON or OFF key to select the beep. ON: T urns on the beep.
42 Adjusting the clock Y ou can adjust the clock after setting. To change this setting, perform the following procedur e. 1 While pressing the COMMANDER OFF button, press the MUTING button.
Unit Settings 43 6 Press and hold the COMMANDER OFF button for more than 2 seconds. OFF COMMANDER The Remote Commander turns off. If you want to quit before finishing Press and hold the COMMANDER OFF button for more than 2 seconds. The pr evious status r eturns, and the Remote Commander turns of f.
44 3 Press “DS_TIME” on the Label keys. DS_TIME The setting display for daylight savings time appears. The current setting is shown inside the [ ], while the other flashes. OTHER SU LEARN NG DS_TIME [STD_TIME] DS_TIME 4 Press the STD_TIME or DS_TIME key .
45 Setting by On-Remote Setup The following section explains On- Remote Setup. If you set the Remote Commander by On-PC Setup, these explanations are not valid. Setting the pr eset codes Y ou should register components to the Remote Commander by setting their preset codes.
46 4 Select the component name you want the Remote Commander to preset by pr essing the Label key (in this case, TV). TV The “TV” and current pr eset code (in this case, “8001”) appear as the Label keys. “0” - “9,” “CLEAR” and “POWER” flash.
47 Setting by On-Remote Setup If you want to quit before finishing Press and hold the COMMANDER OFF button for more than 2 seconds. The pr evious status r eturns, and the Remote Commander turns of f. If you want to return to the previous display Press the BACK button or the COMMANDER OFF button, the previous LCD display r eturns.
48 1 Place the Remote Commander (RM-AX4000) head to head with your component’s remote contr ol. 2 While pressing the COMMANDER OFF button, press the MUTING button. MUTING OFF COMMANDER “SET” appears as the Display title. SET /1 SU LEARN NG PRESET LEARN MACRO TIMER 3 Press “LEARN” on the Label keys.
49 Setting by On-Remote Setup 5 Press the key or button on the Remote Commander you want to “teach” the preset code to. “ LEARN LEARN ” flashes and only the pressed key remains on the LCD display .
50 7 Press the BACK button or the COMMANDER OFF button. BACK or OFF COMMANDER “LEARN” appears as the Display title. LEARN /1 SU LEARN NG TV A-CBL D-SAT DVD If you want to teach another signal, r epeat steps 4 - 6. 8 Press and hold the COMMANDER OFF button for more than 2 seconds.
51 Setting by On-Remote Setup F or accur ate learning • Do not move the remote units during the learning procedur e. • Be sure to pr ess and hold the button of the other remote contr ol until you hear the confirmation beep. • Use fresh batteries in both r emote control units.
52 1 While pressing the COMMANDER OFF button, press the MUTING button. MUTING OFF COMMANDER “SET” appears as the Display title. SET /1 SU LEARN NG PRESET LEARN MACRO TIMER 2 Press “MACRO” on the Label keys. MACRO “MACRO” appears as the Display title.
53 Setting by On-Remote Setup 5 Select the component name you want the Remote Commander to program the series of commands (a macro) by pr essing the Label key (in this case, TV). TV The “TV” appears as the Display title, and the programmable keys for the selected component flash.
54 If you want to quit before finishing Press and hold the COMMANDER OFF button for more than 2 seconds. The setting is canceled, and the Remote Commander turns off. If you want to return to the previous display Press the BACK button or the COMMANDER OFF button.
55 Setting by On-Remote Setup 3 Press “SYSTEM” on the Label keys. SYSTEM “SYSTEM” appears as the Display title. SYSTEM SU LEARN NG SYSTEM5 SYSTEM6 SYSTEM7 SYSTEM8 4 While pressing the SYNC-UP button, press the pr ogrammed key or button you want to clear .
56 3 Press “XPRESS” on the Label keys. XPRESS The setting display for XPRESS macro activation appears. The current setting is shown inside the [ ], while the other flashes. MACRO SU LEARN NG XPRESS Macro ON [ OFF ] 4 Press the ON or OFF key to select the XPRESS macro activation.
57 Setting by On-Remote Setup Contr olling the volume of visual components connected to an audio component The Remote Commander (RM-AX4000) is factory preset based on the assumption that you hear the .
58 2 Press the Display title (SET) once. SET “VOLUME” flashes on the Label keys. SET /2 SU LEARN NG LABEL VOLUME LIGHT DISPLAY 3 Press “VOLUME” on the Label keys. VOLUME The setting display of volume control appears. The current setting is shown inside the [ ], while the other flashes.
59 Setting by On-Remote Setup Setting the Timer Up to 8 T imers can be set on the Remote Commander (RM-AX4000). Y ou can program the T imer for the day of the week, the hour , the minute and a series of commands (a macro). Y ou can set each T imer to be executed or not.
60 4 Press “MACRO” on the Label keys. MACRO “COMPONENT” appears as the Display title. The component names flash on the Label keys. If a page number such as “/1” appears to the right side of Display title, multiple pages are available. Press the number to go to the next page.
61 Setting by On-Remote Setup When the maximum of 32 steps are input, the T imer macro programming finishes and a beep sounds, and the T imer macro displays in order . PROG4 SU AM OFF LEARN NG ON/OFF MACRO TIME TEST Notes •Y ou can input up to 32 steps for one T imer .
62 9 Press the F or f button to set the day(s) of the week. Each time the F or f button is pressed the day(s) of the week change as follows. SU : Sunday MO : Monday TU : T uesday WE : W ednesday TH : Thursday FR : Friday SA : Satur day Then, press the g button.
63 Setting by On-Remote Setup 12 Press the ON/OFF or TEST key to activate the T imer . ON/OFF: W ith a beep sound, “ON” appears on the top-right of the LCD display , and the Remote Commander enters the T imer standby mode. TEST : Y ou can check the T imer macro by transmitting the signals.
64 To clear a Timer macro 1 While pressing the COMMANDER OFF button, press the MUTING button. MUTING OFF COMMANDER “SET” appears as the Display title. SET /1 SU LEARN NG PRESET LEARN MACRO TIMER 2 Press “TIMER” on the Label keys. TIMER “TIMER” appears as the Display title.
65 Setting by On-Remote Setup 5 Press “YES” on the Label keys. YES The T imer macro is cleared, then “COMPONENT” appears as the Display title. COMPONENT /1 SU LEARN NG TV A-CBL D-SAT DVD If you press the NO key The T imer macro is not cleared, and the display returns to step 3.
66 2 Press the Display title (SET) once. SET “LABEL” flashes on the Label keys. SET /2 SU LEARN NG LABEL VOLUME LIGHT DISPLAY 3 Press “LABEL” on the Label keys.
67 Setting by On-Remote Setup 6 Input digits or characters for the Label key by pressing the number keys (0 -9), SYMBOL 1 key or SYMBOL 2 key on the T ouch-key . Begin inputting digits or characters from the left. Pr ess the number key r epeatedly until you obtain the desired digit or character .
68 Er asing all the settings – Reset Y ou can clear all the settings to reset the Remote Commander to its factory settings. 1 While pressing the COMMANDER OFF button, press the MUTING button. MUTING OFF COMMANDER “SET” appears as the Display title.
69 Setting by On-Remote Setup 6 Press the “YES” on the Label keys. W ith a beep sound, the all settings are cleared. 7 Press and hold the COMMANDER OFF button for more than 2 seconds. OFF COMMANDER The Remote Commander turns off. If you want to quit before finishing Press and hold the COMMANDER OFF button for more than 2 seconds.
70 Specifications Operating distance Approx. 32.8 ft. (10 meters) (varies depending on components of differ ent manufacturers) Power requir ements Remote control and backlight: Four size AA (R6) batteries Battery life Approx. 5 months (a Sony TV turned on/of f up to approx.
71 Additional Information Tr oubleshooting If you have problems setting up or using the Remote Commander , first check the batteries (page 10), then check the items below . Continued Trouble with the Remote Commander's basic settings Problem The Remote Commander does not turn on.
72 Problem A System Control key does not work properly. Even if I set the Timer macro, the component does not work properly. Even if I operate an XPRESS function, the TV does not turn on, or it turns off. Even if I operate an XPRESS function, the Source component does not turn on, or it turns off.
73 Additional Information Problem Even if I operate an XPRESS function, the input selector of the TV or RCVR (Receiver/ Amplifier) does not achieve the correct status. Air-Slide does not work properly. Trouble with setting mode Problem Even if I set a preset code, the component does not work.
74 Problem The keys learned do not operate properly. “NG” flashes 5 times when learning. “NG” flashes twice when learning. The Remote Commander does not memorize the radio band change (AM/ FM) or frequency. The setting display does not appear.
75 Additional Information Others Problem I want to restore all the settings. I want to use multiple components (such as a DVD/VCR combo) with XPRESS function. I want to set a DVD player for both XPRESS DVD and XPRESS CD. If the batteries die, are the learned signals lost? My PC cannot recognize the USB connection.
76 KEY DISPLAY POWER 1 – 9, 0, ENTER • 2PIC SWAP DISPLAY MAIN/SUB INPUT WIDE F f g G OK EPG MENU TV FUNCTION To turn the power on/off To change the channel (To change to channel 5, for example, press 0 and 5, or press 5 and ENTER.
77 Appendix Continued KEY DISPLAY POWER 1 – 9, 0, ENTER +100 DISPLAY VOLUME + VOLUME – CHANNEL + CHANNEL – MUTING RECALL A-CBL (Analog Cable box) FUNCTION To turn the power on/off To change the channel (To change to channel 5, for example, press 0 and 5, or press 5 and ENTER.
78 T able of preset functions (continued) KEY DISPLAY POWER 1 – 9, 0, ENTER • INFO S.INDEX DISPLAY FAVORITE INPUT F f g G OK EPG MENU EXIT TOOLS VOLUME + VOLUME – CHANNEL + CHANNEL – MUTING D-.
79 Appendix Continued KEY DISPLAY POWER 1 – 9, 0 +10 ENTER A/B m N M TOP_MENU x X DISPLAY . Z * > T • SUBTITLE • t F f g G OK MENU DV D (DVD player) FUNCTION To turn to the power on/off Numbe.
80 T able of preset functions (continued) KEY DISPLAY POWER 1 – 9, 0, ENTER m N M REC * 1 x X DISPLAY MAIN/SUB Z * 2 INPUT • t F f g G OK MENU EXIT VOLUME + VOLUME – CHANNEL + CHANNEL – MUTING PLAY x2 Q.
81 Appendix Continued KEY DISPLAY POWER 1 – 9, 0, ENTER • INFO m N M S.INDEX REC * 2 x X DISPLAY . FAVORITE > INPUT T • LIST * 1 • t F f g G OK D VR ( Digital V ideo Recorder) FUNCTION To turn the power on/off To change the channel (To change to channel 5, for example, press 0 and 5, or press 5 and ENTER.
82 T able of preset functions (continued) KEY DISPLAY POWER 1 – 9, 0 +10 ENTER m N M x X DISPLAY . Z * > CLEAR D.SKIP VOLUME + VOLUME – MUTING REPEAT SHUFFLE PROGRAM CONTINUE CD (CD player) FUN.
83 Appendix Continued KEY DISPLAY EXIT VOLUME + VOLUME – CHANNEL + CHANNEL – MUTING S.FIELD GENRE MODE T.TONE – CENTER CENTER + – REAR REAR + – SUB_WOOFER SUB_WOOFER + T D.
84 T able of preset functions (continued) KEY DISPLAY POWER 1 – 9, 0 +10 ENTER INFO m N M TOP MENU REC * 1 x X DISPLAY . Z * 2 > INPUT T • LIST • t F f g G OK DVD VR (DVR/DVD combo) FUNCTION .
85 Appendix Continued KEY DISPLAY POWER 1 – 9, 0 +10 ENTER A/B m N M TOP MENU REC * 1 x X DISPLAY . Z * 2 > INPUT T • SUBTITLE • t F f g G OK MENU EXIT DV D-R (DVD Recorder) FUNCTION To turn .
86 T able of preset functions (continued) KEY DISPLAY POWER 1 – 9, 0, ENTER INFO DISPLAY FAVORITE INPUT F f g G OK EPG MENU EXIT TOOLS VOLUME + VOLUME – CHANNEL + CHANNEL – MUTING RECALL D-CBL (Digital Cable box) FUNCTION To turn the power on/off To change the channel (To change to channel 5, for example, press 0 and 5, or press 5 and ENTER.
87 Appendix Continued KEY DISPLAY POWER 1 – 9, 0 +10 ENTER TUNER m N M TOP MENU REC * x X DISPLAY . BAND > INPUT T • SUBTITLE • t F f g G OK MENU EXIT DA V (DVD/Receiver combo) FUNCTION To tu.
88 T able of preset functions (continued) KEY DISPLAY POWER DISPLAY INPUT WIDE F f g G OK VOLUME + VOLUME – MUTING RESET PJ (Projector) FUNCTION To turn the power on/off To show the current play sta.
89 Appendix Continued KEY DISPLAY POWER 1 – 9, 0 ENTER A/B m N M REC * x X DISPLAY . n > VOLUME + VOLUME – MUTING REC_REV REC_FWD FADER TA PE (Cassette deck) FUNCTION To turn the power on/off T.
90 KEY DISPLAY POWER 1 – 9, 0 +10 ENTER m N M REC * x X DISPLAY . Z > CLEAR D.SKIP MD (MD deck) FUNCTION To turn the power on/off To select the track number (0 for the track 10) To select numbers.
91 Appendix KEY DISPLAY OFF 1 2 3 4 5 6 7 8 9 10 11 12 SCENE13 SCENE14 SCENE15 SCENE16 ALL ON ALL OFF ON OFF CHANNEL + CHANNEL – RECALL LIGHT Spacer Raise Lower Toggle Spacer System OFF SCENE1 SCENE.
92 Full Display 0123456789ABCDEFGHIJKLMNOPQRSTUV 0123456789AB SU PM AM 2 13 5 46 JKL GHI MNO TUV PQRS WXYZ ENTER 12 SYMBOL 2 +100 10 11 SYMBOL 1 ABC DEF 8 0 79 MO TU WE TH FR SA ON OFF POWER LOCK VIDEO 3 T APE SHIFT TV DONE WIDE MD DV D REC D. SKIP CLEAR INPUT SWAP VIDEO 2 AUX BAND FAV ORITE PHONO DISPLA Y MAIN/SUB SUB TITLE 5.
93 Appendix Index A Adjusting the backlight 34 the calibration of the LCD display 39 the clock 1 1, 42 the contrast of the LCD display 40 the volume 29 Air-Slide 26 Alignment 39 Audio component 57 Aut.
94 Index (continued) E Erasing all the settings (RESET) 68 the learned function from a key or button 49 the macro (programmed series of commands) 54 the T imer macro 64 F Factory settings Air-Slide li.
95 Appendix S Setting the automatic-off time of the backlight 34 the automatic-off time of the LCD display 37 the backlight 34 the beep 41 the calibration of the LCD display 39 the clock 1 1, 42 the c.
Sony Corporation.
デバイスSony RM-AX4000の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Sony RM-AX4000をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSony RM-AX4000の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sony RM-AX4000の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sony RM-AX4000で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sony RM-AX4000を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSony RM-AX4000の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sony RM-AX4000に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSony RM-AX4000デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。