SonyメーカーRM-LP211の使用説明書/サービス説明書
ページ先へ移動 of 24
Remote Commander Operating Instructions 4-241-675- 11 (2) RM-LP211 © 2002 Sony Corporation.
2 GB Precautions On safety Should any solid object or liquid fall into the cabinet, unplug the receiver and have it checked by qualified personnel before operating it any further. On operation Before connecting other components, be sure to turn off and unplug the receiver.
3 GB Before you use your remote Inserting batteries into the remote Insert three R6 (size-AA) batteries with the + and – properly oriented in the battery compartment. Tip Under normal conditions, the batteries should last for about 3 months. When the remote no longer operates the receiver, replace all the batteries with new ones.
4 GB 1 ?/1 switch Press to turn the receiver on or off. 2 AV ?/1 switch Press to turn on or off the components that the remote is programmed to operate.
Location of parts and basic remote operations 5 GB 5 RM SET UP button Press to display the set up list. 6 Easy scroll key While displaying a list, move up or down to select an item from the list, and then press to enter the selection. I/i buttons Press to change the information displayed on the display.
6 GB Parts description (continued) qd Tape/disc operation buttons The following table shows what components are operated by each button and the function of the buttons. Button(s) Function H Starts play of the playback medium. X Pauses play or recording or starts recording when the component is in recording standby.
Location of parts and basic remote operations 7 GB TOP MENU/GUIDE button Press to display the menu or guide for the DVD player or SAT tuner on the TV screen. Then use the control button to perform the menu operations. AV MENU button Press to display the menus of the VCR, DVD player, or SAT tuner on the TV screen.
8 GB T able of buttons used to control each component When you program the remote to control the following Sony or non-Sony components, you can use the buttons on the remote that are marked with circles. Note, however, that some buttons may not operate your component.
Location of parts and basic remote operations 9 GB Table of the SUB menu operations Press the i button repeatedly to display a list of operations (SUB menu) that the corresponding buttons are not found on the remote. The contents of the lists will vary according to the currently selected component.
10 GB Table of buttons used to control each component (continued) Component Item(s) Function VIDEO CD DISC SKIP + Selects a disc. player DISC SKIP – TIME Changes the time information. INDEX + Selects a index. INDEX – DISC Selects a disc. CD Player DISC Selects a disc.
Location of parts and basic remote operations 11 GB Note If you have programmed the remote to control non- Sony components, note the following: – All the items may not appear when you select a component. – All the items displayed may not function.
12 GB FUNCTION VIDEO1 VIDEO2 VIDEO3 DVD/LD TV/SA T T APE MD/DA T CD/SACD TUNER PHONO USER1 USER2 MACRO1 MACRO2 2ND ROOM* IR SET BACK LIGHT CONTRAST COMMAND MODE ALL CLEAR SOUND FIELD RM SET UP MUL TI .
Using the lists 13 GB Selecting a component Basic procedure for selecting a component Do the procedure below to select a component from the function list. 1 Press FUNCTION. The function list appears. The items in the list correspond with the jacks on the receiver.
14 GB If you selected the tape deck Move the easy scroll key to display the information about deck A or B. Note When the remote is programmed to control a non-Sony tape deck, the following may occur: – The information about deck B is not displayed and you cannot switch between tape deck A and B.
Using the lists 15 GB Programming the remote You can customize the remote to match the components connected to your receiver. You can even program the remote to control non- Sony components and also Sony components that the remote is normally unable to control.
16 GB Performing several commands in sequence automatically (Macro Play) The Macro Play function lets you link several IR codes in a sequential order as a single command. The remote provides 2 macro lists (MACRO 1 and 2). You can specify up to 16 IR codes for each macro list.
Using the lists 17 GB To delay the output of an IR code 1 In step 4, move the easy scroll key to select “ Common ” , then press the key to enter selection. 2 Move the easy scroll key to select “ WAIT TIME ” , then press the key to enter selection.
18 GB Other operations Sorting the sound field list You can arrange the order of sound field list. 1 Press RM SET UP. The set up list appears. IR SET p MENU EDIT AUTO POWER BACK LIGHT 2 Move the easy scroll key to select “ MENU EDIT ” , then press the key to enter the selection.
Using the lists 19 GB Customizing the function list You can set the remote to display only the functions you use in the function list. 1 Press RM SET UP. The set up list appears. IR SET p MENU EDIT AUTO POWER BACK LIGHT 2 Move the easy scroll key to select “ MENU EDIT ” , then press the key to enter the selection.
20 GB Other operations (continued) Sorting the SUB menu You can arrange the order of the SUB menu. 1 Press RM SET UP. The set up list appears. IR SET p MENU EDIT AUTO POWER BACK LIGHT 2 Move the easy scroll key to select “ MENU EDIT ” , then press the key to enter the selection.
Using the lists 21 GB 3 Move the easy scroll key to select “ On ” or “ Off ” , then press the key to enter the selection. When you select “ On ” , the TV INPUT list appears. <TV INPUT> p TV-VIDEO1 TV-VIDEO2 TV-VIDEO3 4 Move the easy scroll key to select the video input of the TV, then press the key to enter the selection.
22 GB Other operations (continued) 1 Press RM SET UP. The set up list appears. AUTO POWER BACK LIGHT CONTRAST p COMMAND MODE 2 Move the easy scroll key to select “ COMMAND MODE ” , then press the key to enter the selection. The COMMAND MODE list appears.
Using the lists 23 GB Clearing all the contents of remote’s memory 1 Press RM SET UP. The set up list appears. BACK LIGHT CONTRAST COMMAND MODE p ALL CLEAR 2 Move the easy scroll key to select “ ALL CLEAR ” , then press the key to enter the selection.
24 GB Specifications General Remote control system Infrared control Power requirements 4.5 V DC with three R6 (size-AA) batteries Dimensions 175 x 63 x 30 mm Mass (approx.) 125 g excluding batteries Design and specifications are subject to change without notice.
デバイスSony RM-LP211の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Sony RM-LP211をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSony RM-LP211の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sony RM-LP211の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sony RM-LP211で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sony RM-LP211を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSony RM-LP211の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sony RM-LP211に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSony RM-LP211デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
