SonyメーカーSLV-761HFの使用説明書/サービス説明書
ページ先へ移動 of 68
Video Cassette Recor der ©1995 by Son y Cor poration Operating Instructions Owner’ s r ecord The model number is located at the rear of the unit and the serial number on the top. Record these numbers in the spaces provided below . Refer to them whenever you call upon your Sony dealer regar ding this product.
Introduction 2 This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of suf ficient magnitude to constitute a risk of electric shock to persons.
3 Introduction Getting Started 4 Step 1: Unpacking 5 Step 2: Setting up the remote commander 7 Step 3: Hookups 23 Step 4: Setting the clock 29 Presetting channels 33 Setting up VCR Plus+ T able of con.
Getting Started 4 • Remote commander • Size AA (R6) batteries • Audio/video cable (3-phono to 3-phono) • 75-ohm coaxial cable with F-type connectors Getting Started Step 1 Unpacking Check that.
5 Getting Started Getting Started Inserting the batteries Insert two size AA (R6) batteries by matching the + and – on the batteries to the diagram inside the battery compartment. Using the remote commander Y ou can use this remote commander to operate this VCR and a Sony TV .
Getting Started 6 Step 2: Setting up the remote commander (continued) Controlling other TVs with the r emote commander The remote commander is pr eprogrammed to control non-Sony TVs. If your TV is listed in the table below , set the appropriate manufactur er ’ s code number .
7 Getting Started Getting Started If you have TV that has audio/video inputs Antenna only , no cable TV Cable box with many scrambled channels No cable box or cable box with only a few scrambled chann.
Getting Started 8 Audio/video (A/V) hookup Pages 8 to 9 If your TV has audio/video (A/V) input jacks, you will get a better picture and sound if you hook up your VCR using these connections. In addition, for a true “ home theater ” experience, you should connect the audio outputs of your VCR or TV to your stereo system.
9 Getting Started Getting Started MENU TIMER SET / CHECK TUNER PRESET CLOCK SET SET VCR Plus+ CHANNELS ADVANCED OPTIONS SELECT : [ ] SET : [ EXECUTE ] ADVANCED OPTIONS AUTO ANT SEL DIMMER AUDIO MIX ON.
Getting Started 10 IN OUT VHF/UHF IN OUT VHF/UHF Step 3: Hookups (continued) Antenna hookup Make the following connections if you ’ re using an antenna (if you don ’ t have cable TV).
11 Getting Started Getting Started 1 Press MENU and select CLOCK SET . 2 Select AUTO, then pr ess EXECUTE. 3 Set FULL AUTO to YES, then press EXECUTE. 3 Preset the channels into the VCR. For details, see page 29. 1 Press MENU and select TUNER PRESET .
Getting Started 12 SET VCR Plus+ CHANNELS GUIDE Or, push [ EXECUTE ] to see CH TV CH 25 – 15 Push [0 – 9] keys to set VCR Plus+ CHANNEL LIST program GUIDE CH MENU TIMER SET / CHECK TUNER PRESET CL.
13 Getting Started Getting Started Pages 13 to 15 Hookup 4 Pages 19 to 21 Hookup 4 Pages 19 to 21 Cable box with many scrambled channels Recommended use Use this hookup if your cable system scrambles all or most channels.
Getting Started 14 TUNER PRESET ANTENNA / CABLE AUTO PRESET MANUAL SET CABLE ON • • ADD SELECT SET : : AFT FINE TUNING • OFF ERASE [] [] ANT CH1 TUNER PRESET ANTENNA / CABLE AUTO PRESET MANUAL SET CABLE ON • • ADD Please wait AFT FINE TUNING • OFF ERASE ANT CH1 2 Select AUTO, then pr ess EXECUTE.
15 Getting Started Getting Started SET VCR Plus+ CHANNELS GUIDE Or, push [ EXECUTE ] to see CH TV CH 33 – 5 Push [0 – 9] keys to set program GUIDE CH VCR Plus+ CHANNEL LIST MENU TIMER SET / CHECK .
Getting Started 16 IN OUT VHF/UHF IN OUT Step 3: Hookups (continued) Hookup 3 Pages 16 to 18 No cable box, or cable box with only a few scrambled channels Recommended use Use this hookup if you do not have a cable box. Also use this hookup if your cable system scrambles only a few channels.
17 Getting Started Getting Started Hookup 3: VCR setup 1 Set the RF UNIT switch to CH 3 or CH 4, whichever channel is not used in your area. If both are used, set the switch to either channel. For details, see page 56. If you made A/V connections (pages 8 and 9), you can skip this step.
Getting Started 18 SET VCR Plus+ CHANNELS GUIDE Or, push [ EXECUTE ] to see CH TV CH 25 – 15 Push [0 – 9] keys to set VCR Plus+ CHANNEL LIST program GUIDE CH 2 Enter the program guide channel, then the channel you use on your TV . 3 Press EXECUTE.
19 Getting Started Getting Started Pages 19 to 22 Hookup 4 Cable box with only a few scrambled channels, using an A/B switch Recommended use By using an A/B switch (not supplied), this hookup allows you to record both scrambled and unscrambled channels conveniently .
Getting Started 20 Step 3: Hookups (continued) Hookup 4: VCR setup RF UNIT CH3 CH4 CLOCK SET SELECT SET QUIT AUTO • MANUAL :[ ] :[ ] :[ ] EXECUTE MENU AUTO CLOCK SET FULL • AUTO YES SET END [] : [.
21 Getting Started Getting Started 5 Preset the cable box output channel (usually 2, 3 or 4). For details, see page 31. 1 Press MENU and select TUNER PRESET .
Getting Started 22 1 Find the VCR Plus+ Channel Listing in your program guide. For details, see page 33. 2 For unscrambled channels, if the channels in the program guide are differ ent from the channels that you actually use on your TV , set the channels that are differ ent as follows.
23 Getting Started Getting Started 1 Press MENU, then pr ess CURSOR > / . to move the cursor ( z ) to CLOCK SET and press EXECUTE. 2 Press CURSOR ? / / to select AUT O, then press EXECUTE. Step 4 Setting the clock Using the Auto Clock Set feature Some TV and cable channels transmit time signals with their broadcasts.
Getting Started 24 Setting the clock (continued) 3 Press CURSOR ? / / to set FULL AUT O to YES, then pr ess EXECUTE. • CURSOR • EXECUTE 4 T o activate the Auto Clock Set function, turn off the VCR.
25 Getting Started Getting Started 1 Follow steps 1 and 2 in “ Using the Auto Clock Set feature. ” The AUTO CLOCK SET menu is displayed. 2 Press CURSOR ? / / to set FULL AUT O to NO. 3 Press CURSOR > / . to move the cursor ( z ) to the item you want to set, then change the setting with the CURSOR ? / / .
Getting Started 26 • For TIME ZONE Select the time zone of your area, or select AUTO to have the VCR automatically set your time zone. • The options are: AUTO n A TLANTIC n EASTERN n CENTRAL n MOUNT AIN n P ACIFIC n ALASKA n HA W AII n AUTO.
27 Getting Started Getting Started CLOCK SET 1 SELECT SET : : [ [] / 1 / 1996 W E D 12 : 00 AM END : ] 06 [ EXECUTE ] CLOCK SET 1 SELECT SET : : [ [] / 1 / 1996 T U E 12 : 00 AM END : ] 0 [ EXECUTE ] .
Getting Started 28 Setting the clock (continued) 5 Set the year , hour and minutes in the same way as the day . 6 Press EXECUTE to start the clock. • CURSOR • EXECUTE.
29 Getting Started Getting Started Pr esetting channels This VCR is capable of receiving VHF channels 2 to 13, UHF channels 14 to 69 and unscrambled CA TV channels 1 to 125. First, we recommend that you preset the receivable channels in your area using automatic pr esetting.
Getting Started 30 3 • T o preset cable TV channels: Press CURSOR ? / / to set ANTENNA/CABLE to CABLE. • T o preset VHF and UHF channels: Press CURSOR ? / / to set ANTENNA/CABLE to ANT . 4 Press CURSOR > / . to select AUTO PRESET , then press EXECUTE.
31 Getting Started Getting Started 1 Press MENU and select TUNER PRESET , then press EXECUTE. 2 • T o preset a channel: 1 Press the number buttons to enter the channel number , then press ENTER. 2 Press CURSOR ? / / to set MANUAL SET to ADD. • T o disable a channel: 1 Press CH +/ – to select the channel number .
Getting Started 32 • MENU EXECUTE • EXECUTE • EXECUTE 1 Press MENU and select TUNER PRESET , then press EXECUTE. 2 Press the number buttons to select the channel you want to fine-tune, then press ENTER. 3 Press CURSOR > / . to select FINE TUNING.
33 Getting Started Getting Started Setting up VCR Plus+ How VCR Plus+ works Whenever you want to recor d a TV program, all you need to do is look up the program ’ s “ PlusCode, ” a number assigned to each program that ’ s published in the TV section of most newspapers, cable TV listings, and even TV GUIDE magazine.
Getting Started 34 SET VCR Plus+ CHANNELS GUIDE Or, push [ EXECUTE ] to see CH TV CH 33 – 3 Push [0 – 9] keys to set Your TV CH VCR Plus+ CHANNEL LIST 03 SET VCR Plus+ CHANNELS GUIDE Or, push [ EX.
35 Getting Started Getting Started 4 Repeat steps 2 and 3 for each channel whose numbers don ’ t match. 5 When you have set all channels, press EXECUTE to confirm your channel settings.
Basic Operations 36 Basic Operations Playing a tape 1 T urn on your TV and set it to the video channel. 2 Insert a tape. The VCR turns on and starts playing automatically if you insert a tape with its safety tab removed. 3 Press · PLA Y . When the tape reaches the end, it will r ewind automatically .
37 Basic Operations Basic Operations To Stop play Pause play Resume play after pause Search forward Search backward Fast-forward the tape Rewind the tape Eject the tape Press p STOP P P AUSE P P AUSE .
Basic Operations 38 INPUT SELECT Recor ding TV pr ograms 1 T urn on your TV and set it to the video channel. T o recor d from a cable box, turn it on. 2 Insert a tape with its safety tab in place. 3 Press INPUT SELECT until a channel number appears in the display window .
39 Basic Operations Basic Operations S 0 : 00 : 22 E SP T o stop r ecording Press p ST OP . T o check the r emaining tape length Press DISPLA Y during playback or recor ding.
Basic Operations 40 Recording TV pr ograms (continued) T o save a r ecor ding T o prevent accidental erasur e, break off the safety tab as illustrated. T o recor d on a tape again, cover the tab hole with adhesive tape. Safety tab Tips • T o select a channel, you can use the number buttons on the remote commander .
41 Basic Operations Basic Operations 1 Press VCR Plus+. 2 Press the number buttons to enter the program ’ s PlusCode. If you make a mistake, press TIMER CLEAR and re-enter the corr ect number . 123 456 789 0 VCR Plus+ Recor ding TV pr ograms using VCR Plus+ Just enter the program ’ s PlusCode listed in the TV program guide.
Basic Operations 42 3 Press T APE SPEED to select SP or EP . 4 Press ONCE, DAIL Y or WEEKL Y : The date, start and stop times, channel number and tape speed appear on the TV screen. If the information is not corr ect, press TIMER CLEAR to cancel the setting.
43 Basic Operations Basic Operations T o use the VCR after setting the timer T o use the VCR before a timer recor ding begins, just press POWER. The “ TIMER ” indicator turns off and the VCR switches on. Remember to pr ess POWER to reset the VCR in timer r ecording standby after using the VCR.
Basic Operations 44 TIMER SET / CHECK DATE WED 6 1 / 0 START STOP CH – / –– – : –– – : –– –– – – / –– – : –– – : –– –– – – / –– – : –– – :.
45 Basic Operations Basic Operations TIMER SET / CHECK DATE WED 6 1 / 0 START STOP CH – / –– – : –– – : –– –– – – / –– – : –– – : –– –– – – / –– .
Additional Operations 46 Playback options Play at various speeds Fast-forward/r ewind V iew the picture during fast- forward or r ewind Play at twice the normal speed Play at high speed Play in slow m.
47 Additional Operations T o r esume normal playback Press · PLA Y . Tip • Adjust the picture using the $ / 4 TRACKING/STILL ADJUST buttons if: – Streaks appear while playing in slow motion. – Bands appear at the top or bottom while pausing. – The picture shakes while pausing.
Additional Operations 48 Recor ding TV pr ograms using the quick timer After starting recor ding in the normal way , you can have the VCR stop recor ding automatically after a specified duration. 1 While recor ding, press QUICK TIMER once. 2 Press QUICK TIMER r epeatedly to set the duration.
49 Additional Operations 1 Press POWER to turn on the VCR. 2 Press MENU and select TIMER SET/CHECK: • If you want to change a setting, go on to the next step. • If you do not need to change the settings, press EXECUTE, then turn of f the VCR to return to r ecording standby .
Additional Operations 50 Recor ding stereo and bilingual pr ograms Recording ster eo programs This VCR automatically receives and r ecords stereo pr ograms. When a stereo program is r eceived, the STEREO indicator lights up. If there is noise in the stereo program, set AUTO STEREO in the ADV ANCED OPTIONS menu to OFF .
51 Additional Operations Main or SAP sound (monaural) Main sound Bilingual Stereo How sound is recor ded on a video tape The VCR recor ds sound onto two separate tracks. Hi-fi audio is recorded onto the main track along with the picture. Monaural sound is r ecorded onto the normal audio track along the edge of the tape.
Additional Operations 52 Adjusting the pictur e Adjusting the tracking Although the VCR automatically adjusts the tracking when playing a tape (the AUTO TRACKING indicator flashes in the display window , then lights steadily), distortion may occur if the tape was recor ded in poor condition.
53 Additional Operations Menu option AUTO ANT SEL AUTO STEREO DIMMER AUDIO MIX NORMAL AUDIO APC ADVANCED OPTIONS AUTO ANT SEL DIMMER AUDIO MIX ON ON • • OFF OFF ON OFF SELECT SET : : [] [] AUTO STEREO NORMAL AUDIO APC • ON OFF • MAIN SAP • ON OFF • 1 Press MENU and select ADV ANCED OPTIONS.
Additional Operations 54 Notes • Make sure you connect the plugs to jacks of the same color . • If the other VCR is a monaural type, leave the red plugs unconnected. • If you connected this VCR to both the LINE IN and LINE OUT jacks of the other VCR, select the input correctly to pr event a humming noise.
55 Additional Operations Operation (when recor ding on this VCR) Before you start editing • T urn on your TV and set it to the video channel. • Press INPUT SELECT to display “ L2 ” in the display window . • Press T APE SPEED on the remote commander to select the tape speed, SP or EP .
Additional Information 56 RF UNIT CH3 CH4 Additional Information General setup information Setting the RF unit When connecting the VCR to the TV using only an antenna cable, you must set the RF UNIT switch on the rear of the VCR so that the TV can receive the correct signal fr om the VCR.
57 Additional Information Attaching the external antenna connector When using a 300-ohm twin lead cable for VHF/UHF antenna, use the EAC-32 antenna connector (not supplied) to connect the antenna to the VCR. 1 Loosen the screws on the antenna connector .
Additional Information 58 Symptom The POWER switch does not function. The power is turned on but the VCR does not operate. The clock has stopped and “– : – –” lights in the display window . The playback picture does not appear on the TV screen.
59 Additional Information Symptom A TV program does not appear on the TV screen. TV reception is poor . The tape starts playing as soon as it is inserted. The tape ejects when you press r REC. Nothing happens when you press r REC. No sound is recor ded on the normal audio track.
Additional Information 60 Specifications System Format VHS NTSC standard V ideo recording system Rotary head helical scanning FM system V ideo heads Double azimuth four heads V ideo signal NTSC color , EIA standards T ape speed SP: 33.35 mm/s (1 3 / 8 inches/s) EP: 1 1.
61 Additional Information Index to parts and contr ols Refer to the pages indicated in parentheses ( ) for details. Front panel 1 POWER switch/indicator 2 T ape compartment 3 6 EJECT button (37) 4 · .
Additional Information 62 Index to parts and controls (continued) Display window Rear panel 7 VTR indicator (39) 8 Line/channel indicator (38) 9 T ime counter/clock indicator (37) !º REC (recor ding).
63 Additional Information Remote commander 1 6 EJECT button (37) 2 Menu operation buttons (53) MENU button CURSOR > / . / ? / / buttons EXECUTE button 3 COUNTER RESET button (37) 4 Channel number b.
Additional Information 64 Index to parts and controls (continued) !£ TV / VTR remote contr ol switch (5, 6) !¢ POWER switch !∞ TIMER CLEAR button (41, 49) !§ TV/VTR button (39) !¶ AUDIO MONITOR .
65 Additional Information E, F , G Editing 55 EP mode 39 H, I, J, K Hi-fi audio track 51 L LP mode 40, 47 M Monitoring audio 50 N, O Normal audio track 51 P Picture adjustment.
Additional Information 66.
67 Additional Information.
uick r eference to using the VCR Sony Corporation Printed in Malaysia If you have any questions about this product, you may call: Sony Customer Information Center 1-800-222-SONY (7669) or write to: So.
デバイスSony SLV-761HFの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Sony SLV-761HFをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSony SLV-761HFの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sony SLV-761HFの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sony SLV-761HFで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sony SLV-761HFを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSony SLV-761HFの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sony SLV-761HFに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSony SLV-761HFデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
