SonyメーカーSLV-SP100Rの使用説明書/サービス説明書
ページ先へ移動 of 30
V ideo Cassette Recor der Operating Instructions 3-867-581- 13 (1) ©1999 by Son y Cor poration SL V -SP100R P AL NTSC.
Introduction 2 WARNING T o pr event fire or shock hazard, do not expose the VCR to rain or moisture. T o avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only . The mains lead must only be changed at a qualified service shop.
Introduction 3 Getting Started Demonstration mode The demonstration mode will activate when you press STD PICT and the RESOLUTION CONTROL II down button on the VCR at the same time. When demonstration mode starts during playback, RESOLUTION CONTROL II menu appears and the level of picture adjustment changes automatically .
Getting Started 4 Getting Started Step 1 Unpacking Check that you have received the following items with the VCR: • Aerial cable • Audio/video cable (3-phono to 3- phono) • Remote commander • .
Getting Started 5 Getting Started Step 2 Setting up the r emote commander Inserting the batteries Insert two R6 (size AA) batteries by matching the + and – on the batteries to the diagram inside the battery compartment. Insert the negative ( – ) end first, then push in and down until the positive (+) end clicks into position.
Getting Started 6 Step 3 Connecting the VCR Connect the aerial to your VCR and TV as shown below to watch TV programmes and video pictur es on your TV . In addition, if your TV has audio/video (A/V) input jacks, we recommend you connect the VCR to your TV using an audio/video cable to get a better pictur e and sound.
Getting Started 7 Getting Started Additional connections T o a TV that has audio/video input jacks This additional connection improves pictur e and sound quality . Connect the TV as shown on the right. If you want to use the T rinitron TV Synchro Play function (see page 14), this connection is necessary .
Getting Started 8 1 Press ? / 1 ON/ST ANDBY to turn on the VCR. 2 T urn on your TV and select a programme position for the video picture. This channel will now be referr ed to as the video channel. Some TV has the programme position, such as 0, that is r eserved for a VCR.
Getting Started 9 Getting Started T o obtain a clear playback picture If the playback picture does not appear clearly in step 3 on page 8, turn the RF CHANNEL screw on the rear panel of the VCR with a screwdriver to a position wher e the TV clearly displays the playback picture.
Basic Operations 10 Basic Operations Playing a tape Z EJECT X P AUSE M FF H PLA Y m REW x STOP 1 T urn on your TV and set it to the video channel. 2 Insert a tape. The VCR turns on and starts playing automatically if you insert a tape with its safety tab removed.
Basic Operations 11 Basic Operations Additional tasks To Stop play Pause play Resume play after pause Fast-forward the tape Rewind the tape Eject the tape Press x STOP X P AUSE X P AUSE or H PLA Y M F.
Basic Operations 12 Playing a tape (continued) T o view the tape status on the scr een Pr ess DISPLA Y . The following information appears on the TV screen. Audio monitor mode* Remaining tape length Time counter T ape speed* * Appears for a few seconds when the DISPLA Y button is pr essed and when the mode is changed.
Basic Operations 13 Basic Operations T o listen to a Stereo tape’ s Stereo sound Left channel Right channel Standard sound* 1 Press AUDIO MONITOR until the display window indicator shows L/R L R No .
Basic Operations 14 Playing a tape (continued) T ur ning on the VCR and TV , and starting playback automatically (T rinitr on TV Synchro Play) Y ou can only use this function if your TV is made by Sony (T rinitr on TV).
Additional Operations 15 Additional Operations Playing/sear ching at various speeds y SLOW 3 / # SEARCH M FF H PLAY m REW Playback options V iew the picture during fast- forward or rewind Play at high speed Play in slow motion Rewind and start play Operation During fast-forward, hold M FF ( M # FF on the VCR) down.
Additional Operations 16 T o r esume normal playback Pr ess H PLA Y . Tips • Y ou can adjust the tracking just by pressing V / v NORMAL/SLOW/STILL ADJUST while playing a tape.
Additional Operations 17 Adjusting the pictur e Although the VCR automatically adjusts the picture when playing a tape, distortions or noise may occur if the tape was recor ded in poor condition. If so, manually adjust the r esolution, colour and tracking.
Additional Operations 18 About Adaptive Pictur e Contr ol (APC) Adaptive Pictur e Control (APC) automatically impr oves recor ding and playback quality by adjusting the VCR to the condition of the video heads and tape.
Additional Operations 19 TV Other VCR (Player) VMC-810HG audio/video cable (not supplied) This VCR (Recorder) LINE OUT LINE 1 IN : Signal flow Editing with another VCR How to connect to recor d on thi.
Additional Operations 20 Operation (when r ecor ding on this VCR) Y ou can make a copy of a tape using this VCR for r ecording or playback. The VCR cannot r ecord TV pr ogrammes directly since it does not have a TV tuner . Befor e you start editing • T urn on your TV and set it to the video channel.
Additional Operations 21 Safety tab T o save a r ecording T o prevent accidental erasure, break of f the safety tab as illustrated. T o recor d on a tape again, cover the tab hole with adhesive tape. Tips • T o edit more pr ecisely , press the X P AUSE buttons on the VCRs to release pause.
Additional Operations 22 Synchr onised r ecording The Synchr onised Recording featur e enables you to r ecord fr om the connected equipment such as a satellite tuner , a cable TV decoder or a TV that has a timer function. Once you set the timer on the other equipment, the VCR will start r ecording the pr ogramme synchronised with the timer .
Additional Operations 23 T o pr epare the Synchr onised recording 1 Set the timer on the equipment to the time of the pr ogramme you want to recor d, then turn the equipment of f. 2 Insert a tape with its safety tab in place. Make sur e the tape is longer than the total recor ding time.
Additional Information 24 Symptom The ?/1 ON/ST ANDBY switch does not function. The power is turned on but the VCR does not operate. The VCR enters standby mode or turns off automatically . The playback picture does not appear on the TV screen. The picture is not clear .
25 Additional Information Recording Others • Normal pictur e • Rough picture • Unclear picture • No picture (or black & white screen appears) Symptoms caused by contaminated video heads initial contamination terminal Symptom The tape starts playing as soon as it is inserted.
Additional Information 26 System Colour system P AL, MESECAM, NTSC 3.58, NTSC 4.43 RF output signal UHF channels 30 to 39 (B/G, D/K) Aerial out 75-ohm asymmetrical aerial socket Inputs and outputs LIN.
27 Additional Information continued Index to parts and contr ols Refer to the pages indicated in parentheses ( ) for details. Front panel 1 1 / u ON/ST ANDBY switch/ indicator (8) 2 T ape operation in.
Additional Information 28 Index to parts and controls (continued) Rear panel 1 Mains lead (6) 2 RF (Radio Fr equency) CHANNEL scr ew (9) 3 AERIAL OUT connector (6) 4 LINE 1 IN AUDIO R/L/VIDEO jacks (1.
29 Additional Information Remote commander 1 Z EJECT button (1 1) 2 TV control buttons (Only for TV) (5) TV/VIDEO a (TV power) ? / 1 (on/standby) VOL (volume) +/– PROG (CH) +/– 3 TV/VIDEO button (This button doesn’ t work with this unit.
Sony Corporation Printed in Malaysia Index A, B Accessories supplied 4 Adjusting picture colour 17 resolution 17 tracking 17 Aerial hookup 6 APC (Adaptive Picture Control) 18 Audio track 13 Auto head .
デバイスSony SLV-SP100Rの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Sony SLV-SP100Rをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSony SLV-SP100Rの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sony SLV-SP100Rの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sony SLV-SP100Rで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sony SLV-SP100Rを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSony SLV-SP100Rの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sony SLV-SP100Rに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSony SLV-SP100Rデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。