SonyメーカーSLV-X827MNの使用説明書/サービス説明書
ページ先へ移動 of 58
SL V -X827MN 3-858-297-11 (1) PAL NTSC Video Cassette Recor der ©1996 by Sony Corporation SL V -X827MN Operating Instructions G 3-858-297- 11 (1).
Introduction 2 SL V -X827MN 3-858-297-11(1) W ARNING T o prevent fire or shock hazar d, do not expose the unit to rain or moisture. T o avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only . The mains lead must only be changed at a qualified service shop.
3 Introduction SL V -X827MN 3-858-297-11(1) T able of contents Getting Started Getting Started 4 Step 1: Unpacking 5 Step 2: Setting up the r emote commander 8 Step 3: Connecting the VCR 10 Step 4: T .
4 Getting Started SL V -X827MN 3-858-297-11 (1) • Remote commander • R6 (size AA) batteries Getting Started • Aerial cable • Audio/video cable (3-phono to 3-phono) Step 1 Unpacking Check that .
5 Getting Started SL V -X827MN 3-858-297-11 (1) Getting Started Step 2 Setting up the r emote commander Inserting the batteries Insert two R6 (size AA) batteries by matching the + and – on the batteries to the diagram inside the battery compartment.
6 Getting Started SL V -X827MN 3-858-297-11 (1) Manufacturer Sony 01* 1 ,02,03,04,05 Aiwa 32 Akai 68 Blaupunkt 10,21 Brionvega 40 C.G.M 09 Colonad 03 Dual 44 Emerson 03,04 Fenner 30,31 Ferguson 52 Gol.
7 Getting Started SL V -X827MN 3-858-297-11 (1) Getting Started Manufacturer Code number Sinudyne 37 TEAC 67 T elefunken 36 Thomson 43* 2 T oshiba 38 White W estinghouse 34 Manufacturer Code number Sa.
8 Getting Started SL V -X827MN 3-858-297-11 (1) Step 3 AERIAL IN Connecting the VCR AERIAL IN Mains lead to mains AERIAL OUT Aerial cable (supplied) : Signal flow 1 Disconnect the aerial cable from your TV and connect it to AERIAL IN on the r ear panel of the VCR.
9 Getting Started SL V -X827MN 3-858-297-11 (1) Getting Started Additional connections T o a TV that has audio/video input jacks This additional connection impr oves pictur e and sound quality . Connect the TV as shown on the right. If you want to use the T rinitron TV Synchr o Play function (see page 29), this connection is necessary .
10 Getting Started SL V -X827MN 3-858-297-11 (1) Step 4 T uning your TV to the VCR If you have connected your VCR to the TV using the audio/video cable, skip this step. 1 Press ON/ST ANDBY to turn on the VCR. 2 Press RF CHANNEL on the VCR. The factory-preset RF channel appears in the display window .
11 Getting Started SL V -X827MN 3-858-297-11 (1) Getting Started 5 T une the TV to the same channel as that shown in the display window so that the picture on the right appears on the TV screen. Refer to your TV manual for tuning instr uctions. If the picture does not appear clearly , see “T o obtain a clear picture fr om the VCR” below .
12 Getting Started SL V -X827MN 3-858-297-11 (1) Selecting a language Y ou can change the on-scr een display language from English to Chinese. Before you start… • T urn on the VCR and the TV . • Set the TV to the video channel. Step 5 1 Pr ess MENU, then press CURSOR > / .
13 Getting Started SL V -X827MN 3-858-297-11 (1) Getting Started Pr esetting channels First, we recommend that you pr eset the receivable channels in your ar ea using automatic presetting.
14 Getting Started SL V -X827MN 3-858-297-11 (1) Step 6: Presetting channels (continued) 3 Press CURSOR > / . / ? / / to move the cursor ( I ) to NORMAL/CA TV , then highlight NORM. T o preset CA TV channels, highlight CA TV . 4 Pr ess CURSOR > / .
15 Getting Started SL V -X827MN 3-858-297-11 (1) Getting Started continued Presetting channels manually 1 Pr ess MENU, then press CURSOR > / . to move the cursor ( I ) to TUNER PRESET and pr ess EXECUTE. 2 Press CURSOR > / . / ? / / to move the cursor ( I ) to NORMAL/CA TV , then select NORM.
16 Getting Started SL V -X827MN 3-858-297-11 (1) Step 6: Presetting channels (continued) 4 Pr ess PROG +/– to select the pr ogramme position. 5 Pr ess CURSOR / repeatedly until the channel you want is displayed. Pr essing CURSOR ? goes back to the pr evious channels.
17 Getting Started SL V -X827MN 3-858-297-11 (1) Getting Started Disabling unwanted pr ogramme positions After tuning the TV channels, you can disable unused programme positions. The disabled positions will be skipped later when you press the PROG +/– buttons.
18 Getting Started SL V -X827MN 3-858-297-11 (1) Setting up G-CODE G-CODE is a feature in Sony VCRs that simplifies programming the VCR to make timer recor dings. T o use G-CODE, each pr ogramme position needs to be matched with its G-CODE guide channel.
19 Getting Started SL V -X827MN 3-858-297-11 (1) Getting Started 3 Press CURSOR / twice to highlight the guide channel column. 4 Pr ess CURSOR > / . to select the guide channel number assigned in the programme guide. 5 Press CURSOR ? / / to confirm the setting.
20 Getting Started SL V -X827MN 3-858-297-11 (1) Setting up G-CODE for satellite br oadcasts When your satellite tuner is connected via the AERIAL IN connector , first you have to set the pr ogramme position for each satellite channel using the TUNER PRESET menu.
21 Getting Started SL V -X827MN 3-858-297-11 (1) Getting Started • MENU • CURSOR • EXECUTE SET UP CH AND G–CODE 5 PROG CH GUIDE 4 3 2 3– 9 12 27 – – – –– – – 6 CH 2 1 MOVE PROG : : ERASE PROG : TIMER CLEAR 56 16 12 SELECT Step 8 • CURSOR 123 456 789 0 CURSOR > / .
22 Getting Started SL V -X827MN 3-858-297-11 (1) 3 Press CURSOR > / . until the selected channel and guide channel row moves to the desired programme position. The selected channel and guide channel are inserted at the new pr ogramme position and the intermediate channels are displaced to fill the gap.
23 Getting Started SL V -X827MN 3-858-297-11 (1) Getting Started Disabling unwanted programme positions Note •B e sure to select the pr ogramme position you want to disable correctly . If you disable a pr ogramme position by mistake, you need to reset that channel manually .
24 Getting Started SL V -X827MN 3-858-297-11 (1) Setting the clock Y ou must set the time and date on the VCR to be able to use the timer recor ding features properly . Before you start… • T urn on the VCR and the TV . • Set the TV to the video channel.
25 Getting Started SL V -X827MN 3-858-297-11 (1) Getting Started 5 Press EXECUTE to start the clock. • EXECUTE Tip • T o change the digits during setting, press CURSOR ? to return to the item to be changed, and select the digits using CURSOR > / .
Basic Operations 26 SL V -X827MN 3-858-297-11 (1) Basic Operations Playing a tape TRINITRON TV SYNCHRO PLA Y 123 456 789 0 1 T urn on your TV and set it to the video channel. 2 Insert a tape. The VCR turns on and starts playing automatically if you insert a tape with its safety tab r emoved.
Basic Operations 27 Basic Operations SL V -X827MN 3-858-297-11 (1) To Stop play Pause play Resume play after pause Search forwar d Search backwar d Fast-forward the tape Rewind the tape Eject the tape.
Basic Operations 28 SL V -X827MN 3-858-297-11 (1) Playing a tape (continued) T o use the time counter At the point on the tape that you want to find later , press COUNTER RESET . The counter in the display window r esets to “0H00M00S.” Search for the point afterwards by r eferring to the counter .
Basic Operations 29 Basic Operations SL V -X827MN 3-858-297-11 (1) T urning on the VCR and TV , and starting playback automatically (T rinitron TV Synchr o Play) Y ou can only use this function if your TV is made by Sony (T rinitron TV).
Basic Operations 30 SL V -X827MN 3-858-297-11 (1) Recor ding TV pr ogrammes 123 456 789 0 1 T urn on your TV and set it to the video channel. 2 Insert a tape with its safety tab in place. 3 Pr ess PROG +/– to select the programme position you want to r ecord.
Basic Operations 31 Basic Operations SL V -X827MN 3-858-297-11 (1) 4 Press T APE SPEED to select the tape speed, SP or LP . LP provides r ecording time twice as long as SP , however , SP produces better pictur e and audio quality . 5 Press r REC to start recording.
Basic Operations 32 SL V -X827MN 3-858-297-11 (1) Recor ding TV pr ogrammes (continued) T o r ecord NTSC colour system programmes NTSC colour signals can be r ecorded on this VCR. For tape speed, select SP or EP in step 4. EP provides recor ding time three times as long as SP , however , SP produces better picture quality .
Basic Operations 33 Basic Operations SL V -X827MN 3-858-297-11 (1) continued Recording TV pr ogrammes using G-CODE Just enter the programme’s G-CODE number listed in the TV pr ogramme guide. The date, times and programme position of that programme are set automatically .
Basic Operations 34 SL V -X827MN 3-858-297-11 (1) Recor ding TV pr ogrammes using G-CODE (continued) 2 Press the pr ogramme number buttons to enter the pr ogramme’s G-CODE number. If you make a mistake, press TIMER CLEAR and re-enter the corr ect number.
Basic Operations 35 Basic Operations SL V -X827MN 3-858-297-11 (1) T o r ecord satellite broadcasts If you connect the satellite tuner and the VCR, you can r ecord satellite pr ogrammes. 1 T urn on the satellite tuner . 2 On the satellite tuner , select the satellite programme for which you wish to make a timer setting.
Basic Operations 36 SL V -X827MN 3-858-297-11 (1) Setting the timer manually If G-CODE is not available in your area, follow the instructions below to set the timer to r ecord programmes. Before you start… • Check that the VCR clock is set to the correct time.
Basic Operations 37 Basic Operations SL V -X827MN 3-858-297-11 (1) 3 Pr ess CURSOR / to confirm the setting. The cursor ( I ) appears at the beginning of the line. T o enter another setting, move the cursor to the next line and r epeat step 2. 4 Pr ess EXECUTE.
Additional Operations 38 SL V -X827MN 3-858-297-11 (1) Playing/sear ching at various speeds Additional Operations Playback options Fast-forward/rewind V iew the picture during fast- forward or rewind Play at high speed Play in slow motion Play frame by frame Rewind and start play Operation During stop, press ) FF or 0 REW .
Additional Operations 39 SL V -X827MN 3-858-297-11 (1) CLICK SHUTTLE ring Using the CLICK SHUTTLE ring W ith the CLICK SHUTTLE ring, you can operate a variety of playback options. During playback or pause, turn the CLICK SHUTTLE ring clockwise or anticlockwise.
Additional Operations 40 SL V -X827MN 3-858-297-11 (1) Recor ding TV pr ogrammes using the quick timer After starting r ecor ding in the normal way , you can have the VCR stop recor ding automatically after a specified duration. 123 456 789 0 1 While recor ding, pr ess QUICK TIMER on the VCR once.
Additional Operations 41 SL V -X827MN 3-858-297-11 (1) Checking/ changing/ cancelling timer settings Before you start… • T urn on your TV and set it to the video channel. 123 456 789 0 1 Press u to turn on the VCR. 2 Press MENU, then select TIMER SET/CHECK: • If you want to change a setting, go on to the next step.
Additional Operations 42 SL V -X827MN 3-858-297-11 (1) Checking/changing/cancelling timer settings (continued) Programme 1 Programme 2 Programme 1 Programme 2 Will be cut off 20 seconds 20 seconds wil.
Additional Operations 43 SL V -X827MN 3-858-297-11 (1) Display window STEREO STEREO STEREO T o listen to Main Sub Main and sub On-screen display MAIN SUB MAIN/SUB Recording ster eo and bilingual pr ogrammes In ZWEITON (German ster eo) system This VCR automatically r eceives and records stereo and bilingual pr ogrammes based on the ZWEIT ON system.
Additional Operations 44 SL V -X827MN 3-858-297-11 (1) Recor ding stereo and bilingual programmes (continued) On-scr een display MAIN SUB MAIN/SUB No indicator Display window STEREO STEREO STEREO No i.
Additional Operations 45 SL V -X827MN 3-858-297-11 (1) Sear ching using the index function The VCR marks the tape with an index signal at the point wher e each recording begins. Use these signals as r eferences to find a specific r ecording. The VCR can search up to 99 index signals ahead of or behind the current position.
Additional Operations 46 SL V -X827MN 3-858-297-11 (1) About Adaptive Pictur e Control (APC) Adaptive Pictur e Control (APC) automatically impr oves r ecor ding and playback quality by adjusting the VCR to the condition of the video heads and tape.
Additional Operations 47 SL V -X827MN 3-858-297-11 (1) Menu option BUZZER DIMMER HIFI AUDIO AUDIO MIX APC Changing menu options 1 Press MENU, then select SET UP MENU. 2 Pr ess CURSOR > / . to select the option to change, then press CURSOR ? / / to change the setting.
Additional Operations 48 SL V -X827MN 3-858-297-11 (1) This VCR (Recorder) TV : Signal flow Editing with another VCR VMC-810MS audio/video cable (not supplied) LINE-2 IN Other VCR (Player) How to conn.
Additional Operations 49 SL V -X827MN 3-858-297-11 (1) P PAUSE Operation (when recor ding on this VCR) Before you start editing • T urn on your TV and set it to the video channel.
50 Additional Information SL V -X827MN 3-858-297-11 (1) T roubleshooting Symptom The ON/ST ANDBY switch does not function. The power is turned on but the VCR does not operate. The clock has stopped and “–:– –” lights in the display window . The playback picture does not appear on the TV screen.
51 Additional Information SL V -X827MN 3-858-297-11 (1) Recording Symptom No TV programmes appear on the TV screen. TV r eception is poor. The tape starts playing as soon as it is inserted. The tape is ejected when you press r REC. Nothing happens when you press r REC.
52 Additional Information SL V -X827MN 3-858-297-11 (1) Specifications System Channel coverage VHF R1 to R12, E2 to E12, NZ1 to NZ9 UHF E21 to E69, R21 to R69 CA TV S01 to S05, S1 to S41 RF output sig.
53 Additional Information SL V -X827MN 3-858-297-11 (1) Index to parts and contr ols Front panel Refer to the pages indicated in parentheses ( ) for details.
54 Additional Information SL V -X827MN 3-858-297-11 (1) Rear panel 1 Mains lead (8) 2 LINE-1 IN AUDIO L/R/VIDEO jacks (48) 3 NTSC PB switch (27) 4 AERIAL OUT connector (8) 5 AERIAL IN connector (8) 6 .
55 Additional Information SL V -X827MN 3-858-297-11 (1) Display window 8 TV system indicator (10) 9 RF indicator (10) 0 Line/programme position indicator (10, 30) !¡ T ime counter/clock indicator (28.
56 Additional Information SL V -X827MN 3-858-297-11 (1) 1 TV / VIDEO remote contr ol switch (5) 26 EJECT button (27) 3 Menu operation buttons (12) MENU button CURSOR > / .
57 Additional Information SL V -X827MN 3-858-297-11 (1) !§ u (on/standby) switch (34, 37) !¶ AUDIO MONITOR button (43) !• TV/VIDEO button ( for TV ) (5) !ª G-CODE button (33) @º Programme number.
SL V -X827MN 3-858-297-11 (1) Sony Corporation A, B Accessories supplied 4 Adjusting pictur e 17, 39, 46 tracking 39, 46 Aerial hookup 8 AFT (Auto Fine T uning) 17 APC (Adaptive Pictur e Contr ol) 46 .
デバイスSony SLV-X827MNの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Sony SLV-X827MNをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSony SLV-X827MNの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sony SLV-X827MNの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sony SLV-X827MNで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sony SLV-X827MNを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSony SLV-X827MNの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sony SLV-X827MNに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSony SLV-X827MNデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。