Sonyメーカーsnt-vの使用説明書/サービス説明書
ページ先へ移動 of 47
preliminary Video Netw ork Station 3-204-941- 11(1) SNT -V304 User’s Guide Page 2 Mode d’emploi Page 47 GB FR 2000 Sony Corporation.
preliminary English W ARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical chock, do not open the cabinet. Refer servicing to qualified personnel only. V ORSICHT Um Feuergefahr und die Gefahr eines elektrischen Schlages zu vermeiden, darf das Gerät weder Regen noch Feuchtigkeit ausgesetzt werden.
preliminary Table of contents 3 GB English T able of Contents Video Network Station Features ...................................... 4 Part Names and Functions ............................................... 5 Front Panel ..............................
preliminary Video netw ork station Features 4 Video Netw ork Station Features This unit is a video network station that distributes real-time CCTV images over a LAN or the Internet. Simple monitoring over a network • By assigning an IP address to this unit, live video can be monitored using standard Web browsers on client PCs.
preliminary 5 P ar t Names and Functions Fr ont P anel S VIDEO VIDEO 1 POWER ST A TUS NETWORK VIDEO 2 75 Ω OFF 4 3 2 1 75 Ω ON VIDEO 3 VIDEO 4 1 S VIDEO Input Terminal (4 pins) Video sources that provide separate Y/C signals are input here. The VIDEO 1 input terminal is not usable when this terminal is used.
preliminary P art Names and Functions 6 Rear P anel COM 1 AC IN (12V) ETHERNET 10 /100 COM 2 12345678 + – A1 C1 A2 C2 RELA Y ~~ A3 C3 A4 C4 B A 1 AC IN (12 V) Input Terminal The supplied AC adapter connects here. 2 COM 1 Terminal (9-Pin D-Sub) The EVI-D30/D31/G20/G21 or HSR-1/1P/2/2P can be connected to here.
preliminary 7 System Application Examples • Up to four video sources can be connected to the server. • Highest image quality can be distributed by using S-video. Using the EVI-D30/D31 Connecting an EVI-D30/D31 to the video network station using the COM1 or COM2 terminal allows control of pan, tilt and zoom from a computer on the network.
preliminary 11 This chapter describes how to set up the video network station for various system types and applications. Video network station settings are made using Internet Explorer 5 (or later).
preliminary Installation 12 Click the (Admin) button to display the “Administration overview” page. After basic settings have been made with the “First Time Installation Wizard”, all video network station settings and management are performed from the “Administration overview” page.
preliminary 13 Application Settings Monitor Screen and Alarm Function Setup The (Application Design) icon is used to configure the monitor screen display and to determine the operation of the video network station when an alarm event occurs. Clicking the “Application Design” icon displays the following screen.
preliminary Installation 14 Dialog boxes relating to [Input 1] (Alarm Input 1) to [Input 4] (Alarm Input 4) are displayed for the following items. Setting Alarm Enabled Always Restricted Between Start.
preliminary 15 Settable contents are shown in the following table. *This setting cannot be changed with the “Network Wizard”. Setting Description Enable the BOOTP protocol to automatically download the IP address. Enter the video network station IP address.
preliminary Installation 16 The setting items are shown in the following table. When finished setting, click the “Save” Icon. The accuracy of the internal clock is ±120 seconds/month or less. Changing Passwords and User Registration Click the (Security) icon to display the “General settings – Security” dialog box.
preliminary 17 4 Repeat the above steps to add more users. Up to 20 users can be registered. 5 Click the [Close] button to close the dialog box. Unregistering a User 1 Select the name of the user to be unregistered from the [User name] drop-down list in the [Delete user] area, and click the “Del” icon.
preliminary Installation 18 Serial P or t Settings The (COM1 and COM2) icons represent the serial ports of the video network station. Use these icons when an EVI-D30/D31/G20/G21 or HSR-1/1P/ 2/2P is connected to the “COM1” or “COM2” ports to set up serial port function and communications parameters.
preliminary 19 Pan/Tilt Driver and Video Camera ID Setup The (Pan Tilt) icon is displayed when a Pan/Tilt device is selected for the serial port usage. If the “Pan Tilt” icon is not displayed next to the icon of the applicable serial port, refer to “Serial Port Settings” on page 18 to reset the serial port usage.
preliminary Installation 20 Setting Pan/Tilt Camera Preset Position The (Preset Positions) icon is used to set preset positions for a pan/tilt camera. The administrator can set and name up to 20 preset positions for a video camera. Users can then position the video camera quickly and accurately by merely recalling a preset position.
preliminary 21 • Available settings differ according to the type of HSR connected. Some settings are different for the HSR-1/1P and HSR-2/2P, which are automatically detected by the video network station.
preliminary Installation 22 Modem Setup The (Modem) icon is displayed when [Modem] is selected for the serial port usage. When a modem is connected to the video network station, if the “Modem” icon does not appear next the “COM2” icon, refer to “Serial Port Settings” on page 18 to reset the serial port usage.
preliminary 23 Video Input Setup The (Video) icons indicate the video sources connected to the VIDEO 1 to VIDEO 4 input terminals. If the serial port usage is set for an HSR-1/ 1P/2/2P, the (HSR) icon is displayed at the [1] and [2] video input terminals.
preliminary Installation 24 Items that can be set are as follows: Setting the Video Input Modulation Method Click the (Video Input/Modulation) icon to display the “Input/Modulation for Video 1” dialog box.
preliminary Installation 22 Modem Setup The (Modem) icon is displayed when [Modem] is selected for the serial port usage. When a modem is connected to the video network station, if the “Modem” icon does not appear next the “COM2” icon, refer to “Serial Port Settings” on page 18 to reset the serial port usage.
preliminary 23 Video Input Setup The (Video) icons indicate the video sources connected to the VIDEO 1 to VIDEO 4 input terminals. If the serial port usage is set for an HSR-1/ 1P/2/2P, the (HSR) icon is displayed at the [1] and [2] video input terminals.
preliminary Installation 24 Items that can be set are as follows: Setting the Video Input Modulation Method Click the (Video Input/Modulation) icon to display the “Input/Modulation for Video 1” dialog box.
preliminary 25 Operation This chapter describes how to monitor the images distributed from the server. z Hint • The functions of the video network station and the views and operation of the monitor screen are set by the system administrator according to the requirements of the surveillance system.
preliminary Operation 26 Camera View Operations 4 [ALARM] Button Clicking this button changes the monitor screen to the Alarm mode, which allows searching images or replaying video when an alarm has occurred. Images saved using the Snapshot icon can be viewed in the Alarm mode.
preliminary 27 qs Camera Title This is the title of the video camera. qd Date and Time This is current date and time. qf Video Camera Images Clicking at a point in an image causes the video camera to pan and tilt so that the clicked point becomes the center of the image.
preliminary Operation 28 1 Image Size Selection Icons Clicking this / icon switches the image size between [Fullsize] and [Hugesize]. 2 Tilt Control Bar Controls tilt (up/down movement) of the video camera. 3 Pan Control Bar Controls pan (left/right movement) of the video camera.
preliminary 29 Vie wing Alarm Event Images The Alarm mode of the Camera View is used to view images saved during an alarm event. The Alarm mode provides an Alarm List screen (List display), Alarm Replay screen (moving image display) and an Alarm Thumbnail screen (thumbnail display).
preliminary Operation 30 Viewing the Alarm List Screen 1 Alarm Number A serial number (1 to 999) is assigned to each alarm trigger. 2 Alarm Image One image is displayed for each trigger event. Clicking an image switches to the Alarm Replay screen (page 31), where that image is displayed as a moving image.
preliminary 31 Viewing the Alarm Replay Screen 1 Alarm Information Shows the alarm event trigger, camera number and alarm event date and time. 2 Alarm Image (moving image) Plays back continuous images from before and after the saved alarm event as a moving image.
preliminary Operation 32 Viewing Thumbnails – The Alarm Thumbnail Screen Alarm events saved in memory can be displayed as thumbnail images. Click the “Thumbnail Display” icon 1 “Paging” Icons Click to change pages when you have multiple pages of thumbnails.
preliminary 33 HSR View Mode Images from the HSR-1/1P/2/2P are displayed in the HSR View. Screen buttons and icons allow switching cameras, controlling pan/tilt/zoom, changing display modes and controlling the HSR-1/1P/2/2P.
preliminary Operation 34 3 Display Partition Buttons Clicking one of these icons selects the image monitor layout. The icons are applicable to the A IMAGE output of the HSR-1/1P/2/2P, and are functional when the [A] button qh is selected, or when the [A/B] button qf and the [A] button 4 are selected.
preliminary 35 HSR-1/1P/2/2P Control The HSR-1/1P/2/2P is controlled from the [HSR CONTROL] page, displayed by clicking the [CTR] button in the HSR View. Functions specific to the HSR-1/1P and HSR-2/2P are described below. Please refer to the HSR-1/1P/2/2P Users Guide for details of other functions.
preliminary Basic Administration 36 Basic Administration Log File Inf ormation Recently executed commands are recorded in the log file on the video network station. The log file is used to check whether a special event was executed, such as whether a command was issued before or after an alarm occurred.
preliminary 37 Resetting to F actory Defaults Two procedures are available to return the video network station to its factory default settings: one using the RESET switch on the unit, and the other by remotely accessing the Administration Overview page from the network.
preliminary Basic Administration 38 Simultaneous Alarm Input to the HSR-1/1P/2/2P and Video Network Station Alarm Memory When alarm recording is initiated by input of an alarm signal to the HSR-1/1P/2.
preliminary 39 HSR-1/1P/2/2P Settings On the “Administration overview” page, select the “HSR” icon first, and then the “Setup” icon to make settings on the Setup Menu page. Items not mentioned below should be set according to the operating environment.
preliminary Basic Administration 40 If Y ou Suspect a Pr oblem If you notice a symptom that leads you to suspect the video network station may be broken, please check the following items before contacting your Sony Service Center. Lithium Battery Replacement The lithium battery lasts about two years with normal use.
preliminary 41 Basic Specifications Operating Voltage 12 V AC Power Consumption 5.5 W Operating Temperature 5 to 50 ºC Weight Approx. 0.8 kg (excluding AC adapter) External Dimensions 145 × 41 × 220 mm (WHD) VIDEO IN Terminals (BNC) × 4 VBS, VS signal: 1.
preliminary Basic Specifications 42 RS-232 Serial Interface Terminal Pin Out 54321 9 8 7 6 • NC = no connection This is a Class A Information Technology Device conforming to the VCCI (Voluntarily Controlled Communication Interference) standards for information processing devices.
preliminary 43 Alarm Inputs Four photocoupler inputs are provided for alarm inputs. Alarm signals can be connected to any of the inputs as follows. To use the electrically isolated inputs, the connected device must have 5 to 20-V DC output, connected as follows.
preliminary Settings List 44 Settings List Settings that can be changed with each wizard and dialog box are as follows. Asterisks (*) denote items that can be set with the First Time Installation Wizard.
preliminary 45 ■ COM Page RS232/RS422 18 Baud rate 18 Data bits 18 Stop bits 18 Parity 18 Pan Tilt 19 Driver 19 ID 19 Preset Name 20 HSR 20 Setup 20 Maintenance 20 Modem 22 Modem Type 22 Dial Tone 2.
preliminary W arranty Card and After Sales Service 46 W arranty Car d and After Sales Service W arranty Car d • The warranty card should be provided with the server at the time of purchase. • Please read the terms on the card, fill in any required items, and keep it in a safe place.
preliminary.
デバイスSony snt-vの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Sony snt-vをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSony snt-vの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sony snt-vの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sony snt-vで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sony snt-vを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSony snt-vの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sony snt-vに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSony snt-vデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
