SonyメーカーSRP-X700Pの使用説明書/サービス説明書
ページ先へ移動 of 20
SRP-X700P 2-347-836- 21 (1) 2003 Sony Corporation Digital Powered Mixer Operating Instructions Before operating the unit, please read this manual thoroughly and retain it for future reference.
2 W ARNING For customers in Canada This ClassB digital apparatus complies With Canadian ICES-003. Owner’s Record The model and serial numbers are located on the rear of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product.
3 Featur es The SRP-X700P is a versatile digital power ed mixer that incorporates an audio mixer , RGB/video switcher , processor and power amplif ier in the 3U rack size. Built-in digital mixer The digital mixer incorporates A/D and D/A con v erters operating at 24 bit/48 kHz sampling and a high-performance DSP .
4 1 PO WER button and PO WER indicator Pressing the PO WER button turns on the power . The PO WER indicator lights in green when the power turns on. Y ou can switch the projectors and displays connected to the SRP-X700P , to po wer-on state or to po wer standby state from the SRP-X700P as they are interlocked by the SRP-X700P Manager setup.
5 7 Po wer amplifier indicators • PRO TECTION indicator The PR O TECTION indicator lights in red when the protection circuit of the internal po wer amplifier works. • CLIP indicator The CLIP indicator lights in red when the output le vel of the internal po wer amplifier is excessi ve such that the output signal is distorted.
6 1 MIC INPUT 1 and MIC INPUT 2 terminals The microphone input terminals. The wireless microphone has the fir st priority when the tuner unit is installed but you can use the wired microphone up until you turn ON the PO WER of the wireless microphone.
7 0 V ideo output terminals The video signal that is selected by the LINE 4 SELECT button on the front panel is output from this ter minal. (The video signal format is not con verted from each other .) • 5BNC output terminals The RGB and component signal output terminals.
8 Fig. 1 Fig. 2 Location and function of parts T uner Unit How to install the tuner unit 1 T urn off the po wer of this unit. 2 Remove the tuner co ver .
9 How to Contr ol the Display fr om the SRP-X700P PROJECTOR CONTROL RS-232C T erminal T o connect the RS-232C terminal of applicable projectors and that of plasma display to this terminal; This model can switch the input signals and po wer ON/ST ANDBY of the projector and plasma display in interlocked condition.
10 REMOTE P ARALLEL T erminal The REMO TE P ARALLEL terminal enables the SRP-X700P to be remotely controlled with a simple circuit connected externally to this terminal.
11 How to Contr ol A V Equipment from the SRP-X700P The SRP-X700P can control the Sony equipment connected to the CONTR OL S OUTPUT1 through 4 terminals.
12 System Configuration System example when operating the SRP-X700P with the default setting when shipped from the factory LINE4 INPUT LINE3 IN AC IN +48V +48V +48V +48V 1234 2 1 3 4 5 6 L R FRONT RS-.
13 System example when external operation panel and environment equipment ar e connected LINE4 INPUT LINE3 IN AC IN +48V +48V +48V +48V 1234 2 1 3 4 5 6 L R FRONT RS-232C COMPONENT/RGB B 7 8 1 2 MIC I.
14 System Configuration System example when operating the SRP-X700P fr om the REMOTE P ARALLEL terminal The REMO TE P ARALLEL terminal of the SRP-X700P is shipped from the f actory with the default setting on the premise of the extern al operation panel as described below .
15 Default settings INPUT Item Initial setting MIC1 - MIC4 – 60 dBu TRIM MIC5/LINE1, MIC6/LINE2 +4 dBu LINE3, LINE4A - 4F – 10 dBu LCF MIC1 - MIC4 ON MIC5/LINE1, MIC6/LINE2 OFF PEQ OFF FR OFF COMP OFF MUTING OFF GAIN LIMIT +10 dB INPUT FADER 0 dB Band 1 63 Hz MIC1 - MIC4 FREQ Band 2 2.
16 Default settings GROUP F ADER Item Initial setting MASTER A MIC1/WL1, MIC2/WL2, MIC3, MIC4 MASTER B MIC5/LINE1, MIC6/LINE2, LINE3, LINE4 REMOTE1 - REMOTE6 Not assigned Item Initial setting INPUT1 A.
17 Block Diagram +48V TUNER SLO T A/D RF IND . LCF +48V LINE COMP A/D A B C D E F COMPONENT /RGB OUT VIDEO OUT RS-232C for projector control RS-232C for e xter nal system controller P ARALLEL REMO TE .
18 Specifications A UDIO Frequency response 20 Hz to 20 kHz ± 0.5 dB (with LINE OUT , 1 kHz reference) T .H.D 0.01 % or less (LINE OUT , 1 kHz) S/N ratio 94 d B or more (LINE 3, LINE 4, IHF-A) Crosst.
19 General Po wer requirement A C 120 V , 50/60 Hz Po wer consumption 150 W Dimensions 482 × 132 × 350 mm (w/h/d) (19 × 5 1 / 4 × 13 7 / 8 inches) (excluding protrusions) Mass Approx.
T r oubleshooting Symptom Power is not turned on. No sound is output. No microphone sound is output. Sound is distorted. No video comes out. The SRP-X700P cannot be controlled by RS-232C. PROTECTION indicator remains lit. Cause/Remedy • Power cord is disconnected.
デバイスSony SRP-X700Pの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Sony SRP-X700Pをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSony SRP-X700Pの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sony SRP-X700Pの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sony SRP-X700Pで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sony SRP-X700Pを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSony SRP-X700Pの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sony SRP-X700Pに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSony SRP-X700Pデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
