SonyメーカーSTR-DE685の使用説明書/サービス説明書
ページ先へ移動 of 60
FM Ster eo FM-AM Receiver 4-238-379- 12 (1) STR-DE685 Owner’s Record The model and serial numbers are located on the rear panel. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product.
2 GB WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To prevent fire, do not cover the ventilation of the apparatus with newspapers, table-cloths, curtains, etc.
3 GB T able of Contents GB List of Button Locations and Reference Pages Main unit ............................................... 5 Hooking Up the Components Required cords ....................................... 6 Antenna hookups ....................
4 GB 4-XXX-XXX-XX AA V IDEO SPEAKERS IMPEDANCE USE 8 – 16 Ω Y P B B-Y P R R-Y N ITOR O UT R L E AKERS IMPEDANCE USE 8 – 16 Ω FRONT A CENTER AC OUTLET FRONT B RL RL Area code About This Manual The instructions in this manual are for model STR-DE685.
5 GB List of Button Locations and Reference Pages wk wl e; ea es ed ej ek el r; ra rs eh ef eg 12 3 5 9 0 6 qa qs qd qf qg qj qk ql w; ws wf wh wa wd wg wj qh 7 4 8 List of Button Locations and Refere.
6 GB Required cords A Audio cord (not supplied) White (L) White (L) Red (R) Red (R) B Audio/video cord (not supplied) Yellow (video) Yellow (video) White (L/audio) White (L/audio) Red (R/audio) Red (R.
Hooking Up the Components 7 GB Antenna hookups FM wire antenna* (supplied) AM loop antenna (supplied) Notes on antenna hookups • To prevent noise pickup, keep the AM loop antenna away from the receiver and other components. • Be sure to fully extend the FM wire antenna.
8 GB OPTICAL VIDEO 2 IN MD/ TAPE IN MD/ TAPE OUT CD/ SACD IN DVD/LD IN AUDIO IN VIDEO IN S-VIDEO IN ANTENNA AM COAXIAL FM 75 Ω SUB WOOFER R L R L SUB WOOFER MULTI CH IN FRONT SURROUND CENTER IN IN O.
Hooking Up the Components 9 GB COMPONENT VIDEO SPEAKERS IMPEDANCE USE 8 – 16 Ω Y P B B-Y P R R-Y DVD/LD IN VIDEO 2 IN MONITOR OUT R L R L SPEAKERS IMPEDANCE USE 8 – 16 Ω FRONT A CENTER SURROUN.
10 GB OPTICAL VIDEO 2 IN MD/ TAPE IN MD/ TAPE OUT CD/ SACD IN DVD/LD IN AUDIO IN VIDEO IN S-VIDEO IN ANTENNA AM COAXIAL FM 75 Ω SUB WOOFER R L R L SUB WOOFER FRONT SURROUND CENTER IN IN OUT CD / SAC.
Hooking Up the Components 11 GB OPTICAL VIDEO 2 IN MD/ TAPE IN MD/ TAPE OUT CD/ SACD IN DVD/LD IN AUDIO IN VIDEO IN S-VIDEO IN ANTENNA AM COAXIAL FM 75 Ω SUB WOOFER R L R L SUB WOOFER MULTI CH IN FR.
12 GB Multi channel input hookups Although this receiver incorporates a multi channel decoder, it is also equipped with multi channel input jacks. These connections allow you to enjoy multi channel software encoded in formats other than Dolby Digital and DTS.
Hooking Up the Components 13 GB OPTICAL VIDEO 2 IN MD/ TAPE IN MD/ TAPE OUT CD/ SACD IN DVD/LD IN AUDIO IN VIDEO IN S-VIDEO IN ANTENNA AM COAXIAL FM 75 Ω SUB WOOFER R L R L SUB WOOFER MULTI CH IN FR.
14 GB AUX AUDIO In hookup If you have an individual audio component (except PHONO) Use the audio cords to connect the LINE OUT jacks on the CD player, tape deck or MD deck to the AUX IN jacks on the receiver so that you can listen to stereo sources in surround sound.
Hooking Up and Setting Up the Speaker System 15 GB Speaker system hookups Required cords A Speaker cords (not supplied) (+) (+) (–) (–) B Monaural audio cord (not supplied) Black Black Hooking Up .
16 GB Stripped cords are touching each other due to excessive removal of insulation. After connecting all the components, speakers, and AC power cord, output a test tone to check that all the speakers are connected correctly. For details on outputting a test tone, see page 22.
Hooking Up and Setting Up the Speaker System 17 GB Performing initial setup operations Once you have hooked up the speakers and turned on the power, clear the receiver’s memory. Then specify the speaker parameters (size, position, etc.) and perform any other initial setup operations necessary for your system.
18 GB Multi channel surround setup (continued) When placing surround speakers behind you Note Do not place the center speaker farther away from the listening position than the front speakers. Normal Speaker and Micro Satellite Speaker If you are using Select Normal Speakers NORM.
Hooking Up and Setting Up the Speaker System 19 GB x Front speaker size ( L R ) • If you connect large speakers that will effectively reproduce bass frequencies, select “LARGE”.
20 GB x Sub woofer selection ( SW S.W. XXX) • If you connect a sub woofer, select “YES”. • If you do not connect a sub woofer, select “NO”.
Hooking Up and Setting Up the Speaker System 21 GB x Surround speaker position ( SL SR PL. XXX)* This parameter lets you specify the location of your surround speakers for proper implementation of the Digital Cinema Sound surround modes. Refer to the illustration below.
22 GB Adjusting the speaker level Use the remote while seated in your listening position to adjust the level of each speaker. Note The receiver incorporates a new test tone with a frequency centered at 800 Hz for easier speaker level adjustment. 1 Press ?/1 to turn on the receiver.
Basic Operations 23 GB Basic Operations Selecting the component Function buttons Press the function button to select the component you want to use. To select Press VCR VIDEO 1 or VIDEO 2 TV or satelli.
24 GB SPEAKERS A/B Press SPEAKERS A/B button to output the sound from the speakers connected to the SPEAKERS FRONT terminals. Each time you press the button, the display changes cyclically as follows: SP. A t SP. B t SP. OFF To drive Select Speaker System A SP.
Enjoying Surround Sound 25 GB Enjoying Surround Sound You can take advantage of surround sound simply by selecting one of the receiver’s pre- programmed sound fields. They bring the exciting and powerful sound of movie theaters and concert halls into your home.
26 GB Press CINEMA STUDIO EX A, B or C. The selected sound field is indicated in the display. x C.ST.EX A (Cinema Studio EX A) Reproduces the sound characteristics of the Sony Pictures Entertainment “Cary Grant Theater” cinema production studio. This is a standard mode, great for watching most any type of movie.
Enjoying Surround Sound 27 GB Tips • The receiver lets you apply the last selected sound field to a program source whenever it is selected (Sound Field Link). For example, if you listen to CD with “JAZZ” as the sound field, change to a different program source, then return to CD, “JAZZ” will be applied again.
28 GB PRO LOGIC D.RANGE EQ MONO RDS DTS MPEG STEREO OPT SP. OFF SL S SR L SW C R MEMORY L F E DIGITAL a COAX 1 qd 2 3 7 5 6 4 qs qa 0 98 Understanding the multi channel surround displays SL SR L C R 1 ; DIGITAL: Lights up when the receiver is decoding signals recorded in the Dolby Digital format.
Enjoying Surround Sound 29 GB qa L F E : Lights up when the disc being played back contains the LFE (Low Frequency Effect) channel and when the sound of the LFE channel signal is actually being reproduced. qs SW: Lights up when sub woofer selection is set to “YES” (page 20) and the audio signal is output from the SUB WOOFER jacks.
30 GB Initial settings Parameter Initial setting L R BAL. L/R XXX* BALANCE CTR XXX dB* 0 dB SUR.L. XXX dB* 0 dB SUR.R. XXX dB* 0 dB S.W. XXX dB* 0 dB L.F.E. XXX dB 0 dB D. RANGE COMP. XXX OFF * The parameters can be adjusted separately for MULTI CH IN.
Enjoying Surround Sound 31 GB Adjusting the equalizer The EQ menu lets you adjust the equalization of the front speakers. The settings are stored individually for each sound field. 1 Start playing a program source encoded with multi channel surround sound.
32 GB Receiving Broadcasts Before receiving broadcasts, make sure you have connected FM and AM antennas to the receiver (page 7). Storing FM stations automatically (AUTOBETICAL) (Models of area code CEL, CEK only) This function lets you store up to 30 FM and FM RDS stations in alphabetical order without redundancy.
Receiving Broadcasts 33 GB 5 If you’ve tuned in an AM station, adjust the direction of the AM loop antenna for optimum reception. 6 Repeat steps 2 to 5 to receive another station. Tips • If you do not remember the precise frequency, press TUNING + or TUNING – after entering the value close to the frequency you want.
34 GB Preset tuning (continued) Presetting radio stations 1 Press TUNER. The last received station is tuned in. 2 Tune in the station that you want to preset using Direct Tuning (page 32) or Automatic Tuning (page 33). 3 Press MEMORY. “MEMORY” appears in the display for a few seconds.
Receiving Broadcasts 35 GB Using the Radio Data System (RDS) (Models of area code CEL, CEK only) This receiver also allows you to use RDS (Radio Data System), which enables radio stations to send additional information along with the regular program signal.
36 GB Description of program types Program type Description indication NEWS News programs AFFAIRS Topical programs that expand on current news INFO Programs offering information on a wide spectrum of .
Other Operations 37 GB Other Operations continued 4 Press ENTER. 5 Repeat steps 2 to 4 to assign index name for another station or program source. Note (Models of area code CEL, CEK only) You cannot change the name of an RDS station. Recording Before you begin, make sure you’ve connected all components properly.
38 GB Recording (continued) Using the Sleep Timer You can set the receiver to turn off automatically at a specified time. Press SLEEP on the remote while the power is on. Each time you press the button, the display changes cyclically as follows: 2-00-00 t 1-30-00 t 1-00-00 t 0-30-00 t OFF The display dims after you have specified the time.
Other Operations 39 GB x CONTROL A1 auto power on (A.PWR – XXX) Lets you turn on the receiver automatically when the component connected via monaural miniplug cord (see page 13) is turned on and the playback is started. When set to “NO”, you can save the power consumption of the receiver during standby mode.
40 GB In the CONTROL A1 control system, the control signals flow both ways, so there is no distinction of IN and OUT jacks. If a component has more than one CONTROL A1 jack, you can use either one, or connect different components to each jack.
Other Operations 41 GB Automatic function selection When you connect a CONTROL A1 compatible Sony amplifier (or receiver) to other Sony components using monaural mini- plug cords, the function selector on the amplifier (or receiver) automatically switches to the correct input when you press the play button on one of the connected components.
42 GB For models of area code U, CA only You can use the remote RM-PP411 to operate the components in your system. Before you use your remote Inserting batteries into the remote Insert R6 (size-AA) batteries with the + and – properly oriented in the battery compartment.
Operations Using the Remote RM-PP411 43 GB continued Remote Operations Function Button V / v Receiver Select a menu item. B / b Receiver Makes adjustment or change the setting.
44 GB Remote Button Description (continued) Remote Operations Function Button AUDIO TV/ VCR/ Changes the sound to DVD player Multiplex, Bilingual or Multi channel TV Sound. SWAP*/ TV Swaps the small and ANGLE large picture. DVD player To select viewing angle or changes the angles.
Operations Using the Remote RM-PP411 45 GB Notes • Some functions explained in this section may not work depending on the model of the receiver. • The above explanation is intended to serve as an example only. Therefore, depending on the component the above operation may not be possible or may operate differently than described.
46 GB Programming the remote You can program the remote to control non- Sony components by changing the code. Once the control signals have been memorized, you can use those components as part of your system. Furthermore, you can also program the remote for Sony components that the remote is unable to control.
Operations Using the Remote RM-PP411 47 GB The numeric codes corresponding to the component and the maker of the component Use the numeric codes in the tables below to control non-Sony components and also Sony components that the remote is normally unable to control.
48 GB To control a VCR Maker Code(s) SONY 701, 702, 703, 704, 705, 706 AIWA 710, 750, 757, 758 AKAI 707, 708, 709, 759 BLAUPUNKT 740 EMERSON 711, 712, 713, 714, 715, 716, 750 FISHER 717, 718, 719, 720.
Operations Using the Remote RM-U305C 49 GB Except for models of area code U, CA You can use the remote RM-U305C to operate the components in your system. Before you use your remote Inserting batteries into the remote Insert R6 (size-AA) batteries with the + and – properly oriented in the battery compartment.
50 GB Remote button description (continued) Remote Operations Function Button TEST Receiver Press to output test tone. TONE MAIN Receiver Press this button MENU repeatedly to select one of the five cursor modes: EQ, SURR, LEVEL, SET UP and NAME. MENU </> Receiver Selects a menu item.
Operations Using the Remote RM-U305C 51 GB Remote Operations Function Button X VCR/ Pauses play or record. CD player/ (Also start recording VCD player/ with components in LD player/ record standby.) DVD player/ MD deck/ DAT deck/ Tape deck x VCR/ Stops play.
52 GB Remote Operations Function Button POSITION** TV Changes the position of the small picture. SWAP** TV Swaps the small and the large picture. SUB CH TV Selects the preset +/–** channels for the small picture. P IN P** TV Activates the picture-in- picture function.
Additional Information 53 GB Additional Information If you have any question or problem concerning your receiver, please consult your nearest Sony dealer. T roubleshooting If you experience any of the following difficulties while using the receiver, use this troubleshooting guide to help you remedy the problem.
54 GB Troubleshooting (continued) There is no sound from the active sub woofer. There is no sound output from the SUB WOOFER terminal depending on the sound field (back page). The surround effect cannot be obtained. Make sure the sound field function is on (press MODE).
Additional Information 55 GB Outdoor FM antenna Receiver Ground wire (not supplied) To ground ANTENNA AM COAXIAL FM 75 Ω The FM reception is poor. Use a 75-ohm coaxial cable (not supplied) to connect the receiver to an outdoor FM antenna as shown below.
56 GB Area code Power requirements E2/E3, AU 240 V AC, 50 Hz SP, CEL, CEK, AR 230 V AC, 50 Hz TW 110 V AC, 60 Hz MX 120 V AC, 60 Hz Frequency response MULTI CH IN, CD/SACD, AUX, MD/TAPE, DVD/LD, VIDEO.
Additional Information 57 GB FM tuner section Tuning range 87.5 - 108.0 MHz Antenna terminals 75 ohms, unbalanced Intermediate frequency 10.7 MHz Sensitivity Mono: 18.3 dBf, 2.2 µV/75 ohms Stereo: 38.3 dBf, 22.5 µV/75 ohms Usable sensitivity 11.2 dBf, 1 µV/75 ohms S/N Mono: 76 dB Stereo: 70 dB Harmonic distortion at 1 kHz Mono: 0.
58 GB Specifications (continued) AC outlets Area code AC outlets U, CA 1 switched, 120 W/1A MAX SP, CEL, CEK, 1 switched, 100 W MAX E2/E3, TW, AU, MX Dimensions 430 × 157.5 × 308.5 mm (16 7/8 × 6 2/8 × 12 1/8 inches) including projecting parts and controls Mass (Approx.
Additional Information 59 GB T ables of settings using SURR, LEVEL, EQ, and SET UP buttons You can make various settings using the LEVEL, SURR, EQ, SET UP buttons, jog dial, and / buttons. The tables below show each of the settings that these buttons can make.
Sony Corporation Printed in Malaysia < LEVEL > FRONT CENTER SUR.L. SUR.R. S. WOOFER LFE D.RANGE BAL LEVEL LEVEL LEVEL LEVEL MIX 1) COMP 1) 2CH ST. zz z AUTO DEC. zz zz z z z NORM.SURR. zz zz z z z C.ST.EX A zz zz z z z C.ST.EX B zz zz z z z C.ST.
デバイスSony STR-DE685の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Sony STR-DE685をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSony STR-DE685の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sony STR-DE685の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sony STR-DE685で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sony STR-DE685を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSony STR-DE685の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sony STR-DE685に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSony STR-DE685デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
