SonyメーカーSWR50の使用説明書/サービス説明書
ページ先へ移動 of 26
User guide SmartWatch 3 SWR50.
Contents Getting started ...............................................................................4 Introduction ........................................................................................4 Overview .................................
Android Wear application ............................................................. 20 Android Wear on your phone or tablet ............................................ 20 Selecting applications for voice actions ...................................
Getting started Introduction Your SmartWatch 3 accessory, which is powered by Android Wear, organises your information, suggests what you need, and shows it to you before you even ask. Use it to receive and reply to messages, view appointment notifications, and glance at weather updates – all from the convenience of your wrist.
To charge your SmartWatch 3 1 Plug one end of the USB cable into the Micro USB port of your SmartWatch 3. 2 Plug the other end of the cable into the charger or into the USB port of a computer. 3 Make sure the charger or computer is connected to an active power source.
To set up your SmartWatch 3 using NFC 1 Make sure that your Android™ phone or tablet is connected to a Wi-Fi ® network and that it maintains a Wi-Fi ® connection throughout the setup procedure. 2 Phone or tablet: Make sure that the NFC function is turned on and that the screen is active and unlocked.
Learning the basics Using the touchscreen Swiping Swipe up • View more cards, if available. • Browse down through options in a list. Swipe down • View previous cards, if not dismissed. • Browse up through options in a list. Swipe left • See more details and actions, if available.
Home screen The home screen shows the time and date and the status of your SmartWatch 3. From the home screen, you can view cards or take voice actions. When the screen is dimmed, you can still see the time and date and view the status of your SmartWatch 3.
To mute or unmute your SmartWatch 3 1 Make sure that your phone or tablet is running Android™ version 4.3 or 4.4. 2 Swipe downwards the whole length of the screen of your SmartWatch 3. 3 Tap to mute or to unmute your SmartWatch 3. After you mute your SmartWatch 3, notification cards stop appearing on the accessory.
Basic settings Accessing settings You can view and change settings directly on your SmartWatch 3 via the Settings menu. You can access the Settings menu using the power key, voice commands or the home screen. To open the Settings menu using the power key 1 Make sure that the screen is active on your SmartWatch 3.
Airplane mode In Airplane mode, the Bluetooth ® function of your SmartWatch 3 is turned off and your SmartWatch 3 is disconnected from your phone or tablet. However, you can still use some basic features. For example, you can set a timer or an alarm.
Using your SmartWatch 3 Staying organised with your SmartWatch 3 You can speak to your SmartWatch 3 to set reminders, take notes, check your schedule, reply to a text message, and more. You can also tap the screen to act on simple tasks that are listed in the task menu.
Handling emails When an email message comes in on your Android™ phone or tablet, you can read and reply to it using your SmartWatch 3. Each email is represented by a corresponding card on the accessory. You can also speak into your SmartWatch 3 to send email messages to saved contacts.
To find a place or business 1 Make sure that the home screen is active on your SmartWatch 3. 2 Say "OK Google". If the command is recognised, the "Speak now" screen opens. 3 Say something like "Find the Eiffel Tower", "Where is the closest supermarket?" or "How far is Starbucks from my home?".
To download a playlist using the Walkman ® application 1 Make sure the battery level of your SmartWatch 3 is 70% or higher. 2 From the main application screen on your Android™ phone or tablet, find and tap Walkman . 3 To open the Walkman ® home screen menu, find and tap Walkman .
To listen to music saved on your SmartWatch 3 using Google Play Music 1 Make sure that your SmartWatch 3 is connected with a Bluetooth ® headset. 2 Make sure that the home screen is active on your SmartWatch 3. 3 Tap the home screen, then swipe upwards.
To view your agenda 1 Make sure that the home screen is active on your SmartWatch 3. 2 Say "OK Google". If the command is recognised, the "Speak now" screen opens. 3 Say "Agenda". The calendar card view opens. To view a specific event, say your special requirement, for example, "When's my next meeting?".
To view your step count 1 Make sure that the home screen is active on your SmartWatch 3. 2 Say "OK Google". If the command is recognised, the "Speak now" screen opens. 3 Say "Show me my steps" or "Start Fit". The Step count view opens.
To set a timer 1 Make sure that the home screen is active on your SmartWatch 3. 2 Say "OK Google". If the command is recognised, the "Speak now" screen opens. 3 Say "Set a timer for" and then say the amount of minutes or hours.
Android Wear application Android Wear on your phone or tablet When the Android Wear application is installed on your phone or tablet, you can customise the settings for your SmartWatch 3. To open the Android Wear application • From the main application screen on your Android™ phone or tablet, find and tap Android Wear .
To reconnect your SmartWatch 3 • Open the Android Wear application on your Android™ phone or tablet, then tap > Connect SmartWatch 3 . Pairing with another wearable device If you have paired yo.
To get help about Android Wear 1 Open the Android Wear application on your Android™ phone or tablet, tap > Help & Feedback . 2 Select the relevant help item.
Important information Using your accessory in wet and dusty conditions To ensure the water and dust resistance of your accessory, the cover for the Micro USB port must be firmly closed. Your accessory is water and dust resistant in compliance with the Ingress Protection (IP) ratings IP68, as explained in the table below.
IP2X. Protected against solid objects > 12.5 mm in diameter IPX2. Protected against dripping water when tilted up to 15 degrees from normal position IP3X. Protected against solid objects > 2.5 mm in diameter IPX3. Protected against spraying water IP4X.
To view the regulatory information DECLARATION OF CONFORMITY FOR SWR50 We, Sony Mobile Communications AB of Nya Vattentornet SE-221 88 Lund, Sweden declare under our sole responsibility that our product Sony type RD-0090 to which this declaration relates is in conformity with the appropriate standards EN 300 328:V1.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
デバイスSony SWR50の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Sony SWR50をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSony SWR50の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sony SWR50の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sony SWR50で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sony SWR50を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSony SWR50の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sony SWR50に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSony SWR50デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
