SonyメーカーXR-C5100の使用説明書/サービス説明書
ページ先へ移動 of 20
1998 by Sony Corporation 3-861-687- 12 (1) Operating Instructions EN FM / AM Cassette Car Ster eo XR-C5100 XR-4800 Owner’s Record The model and serial numbers are located on the bottom of the unit. Record the serial number in the space provided below.
2 EN W elcome! Thank you for purchasing the Sony Cassette Car Stereo. This unit lets you enjoy a variety of features by using an optional rotary commander. In addition to the tape playback and the radio operation you can expand your system by connecting an optional MD/CD unit * (XR-C5100 only).
3 EN With Optional Equipment MD/CD Unit (XR-C5100 only) Playing an MD/CD ............................................ 9 Scanning the tracks — Intro scan .................................................. 10 Playing tracks repeatedly — Repeat play .
4 EN Attaching the front panel Attach part A of the front panel to part B of the unit as illustrated and push until it clicks. Notes • Make sure the front panel is right side up when attaching it to the unit as it cannot be attached upside down. • Do not press the front panel too hard when attaching it to the unit.
5 EN Setting the clock The clock has a 12-hour digital indication. For example, setting it to 10:08 1 Press (OFF) or (DSPL) during operation. 2 Press (DSPL) for two seconds. 1 Set the hour digits. 2 Press (SEL) momentarily. 3 Set the minute digits. 3 Press (DSPL) momentarily.
6 EN SEEK AMS To locate the succeeding tracks To locate the preceding tracks Switching to the radio while fast- winding a tape — Automatic Tuner Activation (ATA) Press (5) during playback. “ATA” appears on the display. When fast-forwarding or rewinding with (SEEK/AMS) for two seconds, the tuner will turn on automatically.
7 EN Cassette Player/Radio Memorizing only the desired stations Up to 6 stations on each band (FM1, FM2, FM3, AM1 and AM2) can be stored on the preset number buttons in the order of your choice.
8 EN Changing the displayed items Each time you press (DSPL) , the display changes between the frequency and the clock. If you cannot tune in a preset station Press either side of (SEEK/AMS) momentarily to search for the station (automatic tuning). Scanning stops when a station is received.
9 EN Radio/Other Functions/MD/CD Unit Adjusting the bass curve Turn the D-BASS control to adjust the bass level (1, 2 or 3). “D-BASS” * appears in the display. To cancel, turn the control to the OFF position. Note If the bass sound becomes distorted, adjust the D-BASS control or the volume button.
10 EN Locating a specific point in a track — Manual search During playback, press and hold either side of (SEEK/AMS) . Release the button when you have found the desired part. Switching to other discs During playback, press either side of (PRESET/DISC) .
11 EN MD/CD Unit/Additional Information Additional Information Precautions • If your car was parked in direct sunlight resulting in a considerable rise in temperature inside the car, allow the unit to cool off before operating it. • If no power is being supplied to the unit, check the connections first.
12 EN Dismounting the unit 1 2 3 4 Release key (supplied) The r otary commander labels You can control this unit with the optional rotary commander (RM-X4S). Some labels are supplied with the rotary commander. Attach that label that matches the functions of the master unit and the mounting position of the rotary commander.
13 EN Location of controls Refer to the pages for further details. 1 SEEK/AMS button 5, 6, 7, 8, 9, 10 2 SOURCE button (TAPE/TUNER/MD * /CD * ) 5, 7, 9 3 (+)(–) (volume/bass/treble/left-right/ front.
14 EN Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION 4800: 13␣ W/C5100: 17 W per channel minimum continuous average power into 4␣ ohms, 4 channels driven from 20 Hz to 20 kHz with no more than 1% total harmonic distortion.
15 EN T roubleshooting guide The following checklist will assist in the correction of most problems you may encounter with your unit. Before going through the checklist below, refer to the operating procedures. General Cause/Solution • Adjust the volume with (+) .
16 EN Error displays (XR-C5100 only) (when the optional MD/CD unit(s) is connected) The following indications will flash for about five seconds and an alarm sound will be heard. Display Cause The disc magazine is not inserted in the MD/CD unit. No disc is inserted in the disc magazine.
17 EN Index Additional Information R Radio 7 Repeat play 6, 10 Reset 4 Rewind 5 Rotary commander 12 S Shuffle play 10 T, U, V, W, X, Y, Z Tape playback 5 TRE (treble) 8 A ATT 8 Automatic Music Sensor .
18 EN.
19 EN.
Sony Corporation Printed in Thailand.
デバイスSony XR-C5100の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Sony XR-C5100をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSony XR-C5100の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sony XR-C5100の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sony XR-C5100で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sony XR-C5100を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSony XR-C5100の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sony XR-C5100に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSony XR-C5100デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
