SonyメーカーXR-C6120の使用説明書/サービス説明書
ページ先へ移動 of 28
Operating Instructions 1999 by Sony Corporation US FM / AM Cassette Car Ster eo XR-C6120 For installation and connections, see the supplied installation/connections manual. Owner’s Record The model and serial numbers are located on the bottom of the unit.
2 W elcome ! Thank you for purchasing this Sony Cassette Player. This unit lets you enjoy a variety of features as well as an optional rotary commander or an optional wireless remote. In addition to the cassette playback and radio operations, you can expand your system by connecting an optional CD/MD unit * 1 .
3 T able of Contents This Unit Only With Optional Equipment Location of controls ............................................ 4 Getting Started Resetting the unit ................................................ 6 Detaching the front panel ...........
4 Location of contr ols Refer to the pages listed for details. 1 SEEK/AMS (seek/Automatic Music Sensor/manual search) control 8, 10, 17, 20 2 MODE ( * ) button During tape playback: Playback direction.
5 Optional wireless remote (RM-X47) The corresponding buttons of the wireless remote control the same functions as those on this unit. 1 OFF button 2 SEEK/AMS button 3 (–) (+) buttons 4 ATT button 5 SOUND/SEL button 6 DSPL button 7 PRESET/DISC button You cannot perform manual search and manual tuning with the remote.
6 Attaching the front panel Attach part a of the front panel to part b of the unit as illustrated and push the left side into position until it clicks. Notes • Be sure not to attach the front panel upside down. • Do not press the front panel too hard against the unit when attaching it.
7 Setting the clock The clock uses a 12-hour digital indication. Example: To set the clock to 10:08 1 Press (SHIFT) , then press (2) (SET UP) repeatedly until “CLOCK” appears. 1 Press (4) ( n ). The hour indication flashes. 2 Set the hour. 3 Press (4) ( n ).
8 Fast-winding the tape During playback, push the SEEK/AMS control up or down and hold. To start playback during fast-forwarding or rewinding, press (MODE) ( * ). Locating a specific track — Automatic Music Sensor (AMS) During playback, push the SEEK/AMS control up or down and release for each track you want to skip.
9 Playing a tape in various modes You can play the tape in various modes: • REP (Repeat Play) repeats the current track. • NR (Dolby NR) lets you select the Dolby * NR B system. • METAL (Metal) lets you play a metal or CrO 2 tape. • BL SKP (Blank Skip) skips blanks longer than eight seconds.
10 Memorizing only the desir ed stations You can preset up to 18 FM stations (6 each for FM1, 2, and 3) and up to 12 AM stations (6 each for AM1 and 2) in the order of your choice. 1 Press (SOURCE) repeatedly to select the tuner. 2 Press (MODE) repeatedly to select the band.
11 Storing the station names — Station Memo You can assign a name to each radio station and store it in memory. The name of the station currently tuned in appears in the display. You can assign a name of up to eight characters per station. Storing the station names 1 Tune in a station whose name you want to store.
12 Erasing the station name 1 Tune in any station and press (LIST) for two seconds. 2 Press (DSPL) for two seconds. 3 Rotate the dial to select the name that you want to erase. 4 Press (5) (ENTER) for two seconds. The name is erased. Repeat steps 3 and 4 if you want to erase other names.
13 Using the r otary commander The rotary commander works by pressing buttons and/or rotating controls. By pressing buttons (the SOURCE and MODE buttons) Each time you press (SOURCE) , the source chan.
14 Adjusting the sound char acteristics You can adjust the bass, treble, balance, and fader. You can store the bass and treble levels independently for each source.
15 Changing the sound and display settings The following items can be set: • CLOCK (page 7). • BEEP – to turn the beep sound on or off. • RM (Rotary Commander) – to change the operative direction of the rotary commander. — Select “NORM” to use the rotary commander as the factory-set position.
16 After you select the desired item, the display will automatically change to the Motion Display mode after a few seconds. In the Motion Display mode, all the above items are scrolled in the display one by one in order. Tip The Motion Display mode can be turned off.
17 Locating a specific track — Automatic Music Sensor (AMS) During playback, push the SEEK/AMS control up or down and release for each track you want to skip. Locating a specific point in a track — Manual Search During playback, push the SEEK/AMS control up or down and hold.
18 Labeling a CD — Disc Memo (For a CD unit with the custom file function) You can label each disc with a personalized name. You can enter up to eight characters for a disc. If you label a CD, you can locate the disc by name (page 19) and select specific tracks for playback (page 20).
19 Locating a disc by name — List-up (For a CD unit with the custom file function or an MD unit) You can use this function for discs that have been assigned a custom name. For more information on disc names, refer to “Labeling a CD” (page 18). 1 Press (LIST) .
20 Selecting specific tracks for playback — Bank (For a CD unit with the custom file function) If you label the disc, you can set the unit to skip or play the tracks of your choice. 1 Start playing the disc and press (SHIFT) , then press (3) (PLAY MODE) for two seconds.
21 Notes on Cassettes Cassette care • Do not touch the tape surface of a cassette, as any dirt or dust will contaminate the heads. • Keep cassettes away from equipment with built-in magnets such as speakers and amplifiers, as erasure or distortion on the recorded tape could occur.
22 Maintenance Fuse Replacement When replacing the fuse, be sure to use one matching the amperage rating stated on the original fuse. If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after replacement, there may be an internal malfunction.
23 Dismounting the unit 1 2 3 4 Release key (supplied).
24 Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION 17 watts per channel minimum continuous average power into 4 ohms, 4 channels driven from 20 Hz to 20 kHz with no more than 1 % total harmonic distortion. Other specifications Cassette player section Tape track 4-track 2-channel stereo Wow and flutter 0.
25 T r oubleshooting guide Problem No sound. The contents of the memory have been erased. Indications do not appear in the display. Cause/Solution • Cancel the ATT function. • Set the fader control to the center position for two-speaker systems. • Rotate the dial clockwise to adjust the volume.
26 Solution Insert the disc magazine in the CD/ MD unit. Insert discs in the CD/MD unit. Insert another CD/MD. Clean or insert the CD correctly. Insert another MD. Play an MD with tracks recorded on it. Press the reset button of the unit. Close the lid or insert the MDs properly.
27.
Sony Corporation Printed in Thailand.
デバイスSony XR-C6120の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Sony XR-C6120をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSony XR-C6120の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sony XR-C6120の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sony XR-C6120で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sony XR-C6120を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSony XR-C6120の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sony XR-C6120に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSony XR-C6120デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
