SonyメーカーXR-C9100の使用説明書/サービス説明書
ページ先へ移動 of 36
Operating Instructions 1998 by Sony Corporation EN FM / AM Cassette Car Ster eo XR-C9100 For installation and connections, see the supplied installation/connections manual. Owner’s Record The model and serial numbers are located on the bottom of the unit.
2 EN W elcome ! Thank you for purchasing this Sony Cassette Player. This unit lets you enjoy a variety of features by using a supplied rotary commander or an optional wireless remote. In addition to the Cassette playback and radio operations, you can expand your system by connecting an optional CD/MD unit * 1 .
3 EN T able of Contents This Unit Only With Optional Equipment Location of controls ................................................. 4 Getting Started Resetting the unit ................................................ 6 Detaching the front panel ...
4 EN Location of contr ols Refer to the pages for details. 1 SEEK/AMS (seek/Automatic Music Sensor/manual search) control 9, 11, 18, 19, 20, 23, 29 2 MODE ( * ) button During tape playback: Playback d.
5 EN Optional wireless remote (RM-X47) The buttons of the wireless remote control the same functions as those on this unit. 1 OFF button 2 SEEK/AMS button 3 (–) (+) buttons 4 ATT button 5 SOUND/SEL button 6 DSPL button 7 PRESET/DISC button You cannot do manual search and manual tuning with the remote.
6 EN Attaching the front panel Place the hole a in the front panel onto the spindle b on the unit as illustrated, then push the left side in. Notes • Be sure not to attach the front panel upside down. • Do not press the front panel hard against the unit when attaching it.
7 EN SOUND LIST MODE SOUND LIST MODE Setting the clock The clock uses a 12-hour digital indication. Example: To set the clock to 10:08 1 Press (SHIFT) , then press (3) (SET UP). 1 Press (5) ( n ). The hour digit flashes. 2 Set the hour. 3 Press (5) ( n ).
8 EN 6 Cassette Player Listening to a tape 1 Press (OPEN) and insert a cassette. 2 Close the front panel. Playback starts automatically. If a cassette is already inserted, press (SOURCE) repeatedly until “FWD” or “REV” appears to start playback.
9 EN Getting Started/Cassette Player To locate preceding tracks To locate succeeding tracks Rewind Fast-forward Playing a tape in various modes You can play the tape in various modes: • Intro (Intro Scan) lets you play the first 10 seconds of all the tracks.
10 EN Radio Memorizing stations automatically — Best Tuning Memory (BTM) The unit selects the stations with the strongest signals and memorizes them in the order of their frequencies. You can store up to 10 stations on each band (FM1, FM2, and AM). Caution When tuning in stations while driving, use Best Tuning Memory to prevent accidents.
11 EN Memorizing only the desir ed stations You can preset up to 20 FM stations (10 for FM1 and 10 for FM2) and up to 10 AM stations in the order of your choice. 1 Press (SOURCE) repeatedly to select the tuner. 2 Press (MODE) repeatedly to select the band (FM1, FM2, or AM).
12 EN Storing the station names — Station Memo You can assign a name to each radio station and store it in memory. The name of the station currently tuned in appears in the display. You can assign a name of up to eight characters per station. Storing the station names 1 Tune in a station whose name you want to store.
13 EN Other Functions Using the r otary commander The rotary commander works by pressing buttons and/or rotating controls. You can control an optional CD or MD unit with the rotary commander.
14 EN Changing the operative direction The operative direction of controls is factory- set as in the illustration below. If you need to mount the rotary commander on the right side of the steering column, you can reverse the operative direction. Press (SOUND) for two seconds while pushing the VOL control.
15 EN Other Functions Adjusting the sound characteristics You can adjust the bass, treble, balance and fader. You can store the bass and treble levels independently for each source.
16 EN 1 Press (SHIFT) . 2 Press (3) (SET UP) repeatedly until the desired item appears. Each time you press (3) (SET UP), the item changes as follows: Clock n D.
17 EN You can label CD and CD TEXT discs with a personalized name using the disc memo function, refer to “Labeling a CD” (page 21). However, if you use personalized labels, they will always take priority over the original CD TEXT information when such information is displayed.
18 EN Playing tr acks repeatedly — Repeat Play You can select: • Repeat 1 – to repeat a track. • Repeat 2 – to repeat a disc. 1 During playback, press (SHIFT) . 2 Press (7) (REP) repeatedly until the desired setting appears. z Repeat 1 z Repeat 2 Repeat off Z Repeat Play starts.
19 EN CD/MD Unit 5 When you finish entering the tracks, press (4) (PLAY MODE) for two seconds. 6 Press (SHIFT) . Notes • “ ** Wait ** ” appears in the display while the unit is reading the data, or if a disc has not been put into the unit.
20 EN Adding tracks to a program 1 Press (SHIFT) , then press (4) (PLAY MODE) for two seconds. “P 1” shows Program 1 is selected. If you have labelled the disc, the bank edit mode appears. Press (4) (PLAY MODE) to display “P 1” above. To select Program 2, press (5) ( n ) repeatedly until “P 2” appears.
21 EN Labeling a CD — Disc Memo (CD unit with the custom file function) You can label each disc with a personalized name. You can enter up to eight characters for a disc. If you label a CD, you can locate the disc by name and select the specific tracks for playback (page 23).
22 EN Erasing the disc memo 1 Press (SOURCE) repeatedly to select CD. 2 Press (MODE) repeatedly to select the CD unit. 3 Press (LIST) for two seconds. 4 Press (DSPL) for two seconds. 5 Rotate the dial to select the name you want to erase. 6 Press (6) (ENTER) for two seconds.
23 EN CD/MD Unit Selecting specific tracks for playback — Bank (CD unit with the custom file function) If you label the disc, you can set the unit to skip tracks and play only the tracks you want. 1 Start playing the disc and press (SHIFT) . Then press (4) (PLAY MODE) for two seconds.
24 EN DSP The optional XDP-U50D lets you add some effects to the sound field of the currently selected source. Selecting a surr ound menu You can select a desired surround menu to best fit the audio source. The following menus can simulate different sound fields and enhance the sound so that you feel as if you are in a live concert.
25 EN Storing a surr ound effect onto CDs — Digital Signal Processor (DSP) Custom File (CD unit the with custom file function) Once you have registered the desired surround menu onto the discs, you can enjoy the same surround menu every time you play them.
26 EN 4 Rotate the dial to adjust the center of the sound field to the left or right. Then set the center of the sound field. 5 Press (5) ( n ). 6 Rotate the dial to adjust the center of the sound field to the front or rear. 7 Press (SOUND) for two seconds.
27 EN Adjusting the frequency of the subwoofer(s) To match the characteristics of the connected subwoofer(s), you can cut out the unwanted high and middle frequency signals entering the subwoofer(s).
28 EN 4 Rotate the dial to select the turn-over frequency. The turn-over frequencies change as follows: Bass: 198 Hz n 250 Hz n 314 Hz * n 396 Hz Treble: 2.0 kHz n 3.1 kHz * n 4.0 kHz n 5.0 kHz * Factory-set frequency 5 Press (SOUND) for two seconds. The display returns to the normal playback mode.
29 EN 3 Press (5) ( n ). The unit stores TV channels in the order of their frequencies on the number buttons. The setting is stored with a beep sound. 4 Press (SHIFT) . Notes • The unit does not store TV channels with weak signals. If only a few TV channels can be received, some number buttons will remain empty.
30 EN Displaying the information stor ed on discs Press (LIST) momentarily during CD/MD playback. Example: When CD unit 1 is selected. 1 Disc numbers 2 Titles stored as custom files 3 No disc is loade.
31 EN W atching the TV or video while listening to a tape , CD or MD — Simultaneous Play The simultaneous play function does not work while you are listening to the radio. 1 Press (SOURCE) for two seconds. 2 Press (2) ( N ). 3 Press (SOURCE) repeatedly to select a tape, CD or MD.
32 EN Notes on Cassettes Cassette care • Do not touch the tape surface of a cassette, as any dirt or dust will contaminate the heads. • Keep cassettes away from equipment with built-in magnets such as speakers and amplifiers, as erasure or distortion on the recorded tape could occur.
33 EN Dismounting the unit 1 Press the clip inside the front cover with a thin screwdriver, and gently pry the front cover free. 2 Repeat step 1 on the left side. The front cover is removed. 3 Use a thin screwdriver to push in the clip on the left side of the unit, then pull out the left side of the unit until the catch clears the mounting.
34 EN Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION 19 watts per channel minimum continuous average power into 4 ohms, 4 channels driven from 20 Hz to 20 kHz with no more than 1 % total harmonic distortion. Other specifications Cassette player section Tape track 4-track 2-channel stereo Wow and flutter 0.
35 EN T roubleshooting guide Problem No sound. The contents of the memory have been erased. Indications do not appear in the display. Cause/Solution • Cancel the ATT function. • Set the fader control to the center position for two-speaker systems.
Solution Insert the disc magazine in the CD/ MD unit. Insert discs in the CD/MD unit. Insert another CD/MD. Clean or insert the CD correctly. Insert another MD. Play an MD with tracks recorded on it. Press the reset button of the unit. Close the lid or insert the MDs properly.
デバイスSony XR-C9100の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Sony XR-C9100をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSony XR-C9100の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sony XR-C9100の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sony XR-C9100で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sony XR-C9100を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSony XR-C9100の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sony XR-C9100に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSony XR-C9100デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。