Speco TechnologiesメーカーDVR-T4IPの使用説明書/サービス説明書
ページ先へ移動 of 126
USER MANUAL 4-CHANNEL TRIPLEX NETWORK DVR DVR-T4IP * Default system password: 111111 (for RAMS, Record stop, Menu set up, System off, Auto key lock ) * Default ID: admin (for RAMS) Speco T echnologies , 200 New Highway Amityville, N.Y . 1 1701 T oll Free : 1-800-645-5516 In Metro NY : 631-957-8700 Fax:631-957-9142 or 631-957-3880 Web:w w w.
2 T o prevent fire or shock hazard, do not expose the unit to rain or moisture. The symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the unit.
3 Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
4 T able of content s 1. SYSTEM OV ER VIEWS .......................................................... 13 1.1 P ACKING LIST ....................................................................................................................... 13 1.1.
5 2.6.1 Press the Pl ay button .......................................................................................................... . 25 2.6.2 Audio f iles .........................................................................................
6 3.2.2.3 Channel number ................................................................................................................. ................. 34 3.2.2.4 Quality ...........................................................................
7 3.3.8.3 SMTP Server IP address ......................................................................................................... ............ 47 3.3.8.4 Authentication..........................................................................
8 3.7.5 Language ............................................................................................................................. 62 3.7.6 System Log.........................................................................................
9 3.1 1 PLA YBACK....................................................................................................................... . 73 3.1 1.1 PLA YBACK of recorde d Images .......................................................................
1 0 4.3.21 Close pr ogram ..................................................................................................................... 93 4.4 U NI P LA YER ......................................................................................
1 1 5.1.1 Installing single ha rd disk drive ......................................................................................... 11 3 5.1.2 Installing two hard disk drives. ........................................................................
1 2 All rights reserved. No part of th is p ublication may be reproduced or transmitted in any form or any means, electronic or m echanical, including photocopy , recording, or any information storage and retrieval system, without prior perm ission.
1 3 1. SYSTEM OVER VIEWS 1.1 Packing list The following items are included with the DVR-T4IP . Please be certain that all items are included as soon as you open the box: 1.
1 4 1.2 Features & specifications 1.2.1 Features 4-channel Embedded Digital Video Recorder MPEG-2 compression Quadplex mode for simultaneous recordi ng, playback, backup, and networkin.
1 5 1.2.2 Specifications Item Description Image System NTSC, P AL selectable Video Input 4CH Composite, 4CH Loop through, BNC Video Output 1CH Composite, BNC, 1CH S-Video Video Compression MPEG-2 Quad.
1 6 1.3 Name, function & connections 1.3.1 Front view 12 3 4 5 6 7 8 Description: 1. Removable HDD Rack or CD-RW Rack Removable Hard Disk Drive or CD RW Drive 2. LED indicator POWER: Power Off st atus is indicated by a R ed light and ON st atus is indicated by a Green light.
1 7 ZOOM: Zoom In/Out on the images during Live Viewing. FRZ : Freeze. - Press button once to freeze the frame at live mode. Press again to return. - T o take a still image capture at playback mode. -Exchange of video input type : Press p ower butt on with FRZ button from NTSC to Pal or P AL to NTSC.
1 8 8. Recording/Playback buttons RECORD: Press once to begin recording all acti ve channels. Press again to end recording. R-PLA Y : Reverse Playback. Press to begin reverse playback. Under PTZ control menu, used to decrease the speed of Pan, T ilt, Zoom, Focus.
1 9 6. VIDEO OUT T erminals for composite video and s-video to connect with monitor 7. CAMERA IN: Video input (to connect with camera output) OUT : Vi deo output (Loop-through output for video input) 8. F AN Heat protection fan to reduce heat in the unit 9.
2 0 1.3.3 Remote control function POWER NET HDD NUMBER SEQ DIRECTION / OK REVERSE PLAY STOP FRZ PTZ 4 Division MUTE REC LOG INFO LOCK DVR SEARCH MENU MULTI PAUSE PLAY ZOOM OSD MUTE: V oice Mute su.
2 1 1.4 INST ALLA TION 1.4.1 Installation and connection Camera 1 Camera 4 Camera 3 Camera 2 Monitor Speak Sensor 1 PTZ Reciever Alarm Network USB Sensor 4 Sensor 3 Sensor 2 RS-485 AUX IN AUX OUT Mic 1.4.1.1 Camera The unit comes with 4 video IN a nd 4 video OUT for up to four camera connection.
2 2 1.4.1.3 Audio : support or not support Use IN for a Line input and OUT for speaker output. 1.4.1.4 RS-232 Use this connector to connect RS-232 cable to the serial port on your PC to control the DVR or to perform Quick Installation. 1.4.1.5 PTZ/AUX/ALARM 1.
2 3 1.4.1.5.4 Sensor 1~4 Users can connect up to four N.O./N.C. type sensors and co nfig ure them within Main Me nu, Sensor Setting. 1.4.1.6 Network Connect RJ-45 Ethernet cable. 1.4.1.7 USB flash memory Perform backup of record ed video files fr om DVR system to USB flash memory manually .
2 4 2. Basic operation procedures 2.1 Power On/Off 2.1.1 Power on Using either the keyp ad or the remote control, pr ess the “Power” button. (Note: In case of power outage or rare inst ance of system failure, the DVR will reboot automatically) The Power LED light will turn from red to green when it has turned on properly .
2 5 2.5.1 Recording types There are two types of recording: MUX or QU AD type. For resolution, select either D1 (720*480 (NTSC), 720*576 (PAL)) or CIF (360*240 (NTSC), 360*288 (PAL)). Audio channel is synchronized with the selected video signal. Select Video input quality, Frame rate, and recording mode.
2 6 2.8 Backup The DVR-T4IP has various types of backup methods : 2.8.1 Removable HDD If there are two hard disk drive s equipped in the DVR, the removable HDD will be used as a backup drive. MANUAL BACKUP , AUTO BAC KUP will be selectable for backup.
2 7 2.9 Client Program 2.9.1 RAMS (Remote Access & Monitoring System) Remotely access, monitor , and operate the DVR for real-time live viewi ng, playback, backup, on-the-fly recording, and c ontrol over the LAN/W A N Upgrade the S/W(Kernel, Ramdisk) of DVR Install the RAMS program as referred to in section 4.
2 8 3. Main Setup screen Figure 3-1 Main Setup screen 3.1 Camera Setup menu Figure 3-2 Camera setup screen.
2 9 3.1.1 Channel number . A user can select t argeted camera fro m CH #1 ~ CH # 4. After setting, this, live viewin g picture will be changed to selected channel automatically . 3.1.2 Camera Name Edit Figure 3-3 Camera name edit screen User can edit came ra name indicated b utton part of each channel.
3 0 3.1.4 PTZ setup Figure 3-4 PTZ setup screen It sets PTZ protocol of t argeted channel in the Camera Setup. (Please refer to p aragraph 3.1.1 for channel selection) 3.1.4.1 Model Number Select the PTZ model or choose “NONE”. 3.1.4.2 PTZ ID Set the PTZ ID: 0 ~ 255 The PTZ ID must match the ID numb er that has be en set by the PTZ Controller .
3 1 3.1.4.4 RS-485 Setting Choose from the following to set PTZ RS-485 b aud rate: 2400, 4800, 9600, 1 9200, 38400, 57600, 1 15200 bps. 3.1.4.5 TEST Users can test the PTZ control af ter setting the parameters. After clicking the TEST button, PTZ control will be available and tested by up/ down key .
3 2 Preset numbers are selected by Lef t/R ight buttons and the Pan/T ilt drive moves to the preset position after pressing OK button. - Light : T o turn on/off t he camera lighting selected by Left/Right and OK buttons. - Camera : T o turn on/off the camera itself selected by Left/Right and OK buttons.
3 3 3.2 Record Setup menu 3.2.1 Record T ype Users can select either Quad mode or MUX mode for recording type. MUX Recording records full size recording sequentially from each channel. Quad recordi ng records 4 cha nnel video signal as one same picture a nd each channel h as quad sliced size.
3 4 3.2.2.2 Audio Sync As audio input port is on e channel available, user should syn c hronize a udio signal with targeted video signal. With sy nchronized channel w ill record audio as well as video. But others will only record video input signal only .
3 5 alarm recording will be con trolled at Post alarm recording time on Event Setup Menu. (Refer to paragraph 3.3.4) • Sensor: S tart to record under se nsor inpu t. As same as motion mode, it st arts pre alarm recordin g around 2 or 3 secon d and maintain it until no of sensor input.
3 6 3.2.3.3 Audio ON/OFF User can set audio on/off function. If used A udio O n mode, audio signal will be recorded simultaneously with video and used audio of f mode, audio signal not be recorded.
3 7 User can select to set recording schedule targeted date, time based week & 24Hours. Move the cursor to the desired position of time by pressing up/do wn key and set the recording mode at the desired position of time by pressing the OK button with referring to the Help Message per Record Mode on the right posit ion.
3 8 3.3.1 Motion Detection Setting Figure 3-1 1 Motion Detecting Setup screen Sets up the motion detect ing area and sensitivity . It sets u p all 4 channels when it is set on the Quad recording. 3.3.1.1 Channel Sets up the motion dete cting area and sensitivity for each chan nel.
3 9 3.3.1.3 Detection Zone Figure 3-12 Motion Detecting Area Setup screen Selects the motion detecting area. The sky blue square implies the current cursor and the yellow square implies the area that was alr eady selected as the motion detecting area.
4 0 3.3.2 Sensor Setting Figure 3-13 Sensor Setting screen 3.3.2.1 Sensor T ype N.O.: Norm al Open. Operation mode f or the install ed sensor’s contact p oint is usually open in normal condition and changed from open to close at sensor ’s detect event.
4 1 3.3.3 Alarm Output Figure 3-14 Alarm Output Setting: 3.3.3.1 Sensor Configure the alarm out on/off activated by the sensor . 3.3.3.2 Motion Configure the alarm out on/off tr iggered by the motion detection. 3.3.3.3 Relay Time Configure the alarm duration time.
4 2 3.3.5 FTP Setting Figure 3-15 FTP Setting Enables the unit to transmit an assigned FTP Len gth of Motion picture to an FTP Server over network when an event occurs. The event will be transmitt ed 15 seconds af ter the event occurs. 3.3.5.1 FTP Server IP address Configure the IP address of the FTP server .
4 3 3.3.5.2 ID Configure the FTP ID. The ID can contain maximum of 31 characters. Figure 3-16 FTP ID 3.3.5.3 Password Configure the FTP p assword. The password can contain maximum of 12 characters.
4 4 3.3.5.4 T arget Path Configure the path to tra nsmit to an FTP se rver . The path ca n contain m aximum of 31 characters. Figure 3-18 FTP Target Path 3.3.5.5 FTP Length of Image (second) Select FTP length of image by second (5 to 10 seconds are select able) to transmit image files for selected seconds.
4 5 Figure 3-19 FTP T rigger Setting 3.3.6.1 Sensor Configure sensor events. 3.3.6.2 Motion Configure motion events. 3.3.7 E-Mail Address Setting T ransmits the content of an event log periodically through e-m ail. Configure up to four e-mail address to tr ansmit under event st atus simu lt aneously .
4 6 Figure 3-20 E-Mail Address setting 3.3.8 E-Mail Setting Figure 3-21 E-Mail Setting 3.3.8.1 Send (Period) Configure the e-mail transmitting cycle. It does not transmit when it is set to NO. The setting time can be set up at the unit s of within 2 minutes af ter event, 30minutes, 1, 2, 5, 12, 24 hours.
4 7 3.3.8.2 Prohibition setting Set up prohibition time to transmit the e-mail. Users can enter prohibiti on time from the starting time and the ending time of transm itting the e-mail 3.3.8.3 SMTP Server IP address Configure the IP address of the SMTP server to transmit the e-mail.
4 8 3.3.8.4.1 Password Enter sender ’ s mail password for authentication 3.3.9 Event Log Shows the event log of the sel ected channel. It can re set periodically by setting e-mail a s described in paragraph 3.
4 9 3.4 Playback Setup Figure 3-23 Playback setup screen 3.4.1 Channel Designate the chann el to be viewed when the “R eplay” button is pressed a nd Channel 1 ~ Channel 4 can be selectable . This option is onl y available when the MUX m ode has been selected.
5 0 3.5 Display Setup screen Figure 3-24 Display setup screen Determine whether to have the following be shown on the monitor: Camera n ame, T ime/Date, HDD status, Borders (Quad V iew).
5 1 3.6 Network Setup screen Figure 3-25 Network Setup screen 3.6.1 DDNS setting Set up DDNS (Dynamic Domain Name System) server address & port number .
5 2 Under DHCP or PPPoE configuration using IP Router , the DVR will receive an IP address periodically , and each time, the IP addre ss can be differe n t. Therefore, in order for users to access the DVR over the netwo rk, it must update its IP address to the DDNS Server .
5 3 3.6.2 Remote Connection Login Passw ord There are two levels of access that can be set up in the RAMS program. - Admin (Highest), User (Normal) - B y d e f a u l t , t h e p a s s w o r d i s 111111 w hen the software is first installed. Users can use any numeric number from 0~4, combined 6 units.
5 4 3.6.4 St atic Figure 3-28 S tatic Network setting 3.6.4.1 DDNS On/off 3.6.4.2 Port Configure the Port number to be used to conn ect to the DVR system using RA MS (Remote Access & Monitoring System). The default Port number is port 80. Chang e easily by using Jog/shuttle equipped in front panel.
5 5 3.6.5 DHCP Figure 3-29 DHCP setup screen 3.6.5.1 Port Please refer to paragraph 3.6.4.1for Port setting of S tatic/ DHCP/ PPPoE) 3.6.6 PPPoE Figure 3-30 PPPoE setting.
5 6 3.6.6.1 Port Please refer to the port setting in paragraph 3.6.4. 3.6.6.2 ID T ype in your user ID for the ADSL account (PPPoE). The password can cont ain maximum of 31 characters. Figure 3-31 ID input screen 3.6.6.3 Password T ype in your user Password fo r the ADSL account (PPPoE), The password can cont ain maximum of 12 characters.
5 7 3.6.7 Changing the Netw ork configuration If users want to change ne twork type of DVR-T4 IP , users must reboot the system. User can restart the new network mode setting af ter entering ‘yes’ key button. Figure 3-33 Changing the Network setting screen 3.
5 8 3.7.1 DVR Name T ype in the name of the DVR you wish to assi gn. The name can contain maxi mum of 12 digits. Figure 3-35 DVR name screen Using the arrow , type in the DVR name.
5 9 Set up part for system password, related function and application. This is a part of inst allation, actual sy stem password, related function and p assword application. 3.7.2.1 Password Setting T o change system password: First, type-in the current p assword, confirm.
6 0 3.7.2.3 Auto Key Lock Possible Setting time is every 30sec, 1 min, 3min, 5min, 10 minutes. If users choose setting time among them, auto key lock function will st art exactly after the setting time and lock key type icon will be displayed at the bottom of window .
6 1 For example, if users ado pt day light saving time from May 01 to Oct.31, input the dates accordingly . 3.7.3.3.1 Apply Configure Day Light Saving T ime. 3.7.3.3.2 St art date (m/d) Set up start day in Day Light Saving Time mode. 3.7.3.3.3 End date (m/d) Set up end date in Day Light Saving T ime mode.
6 2 3.7.5 Language English, Korean, Japanese and S panish are available. 3.7.6 System Log It is for displaying major system events. The items that manage by Log are V ideo Loss, Power On, Power Off, Menu entry , HDD Full, failure of FTP transmission, failure of E-mail transmission.
6 3 3.7.7.1 The number of HDD Show the HDD quantity that is built –in. 3.7.7.2 Write Mode Set up writing type in recording. T ypes are ‘Once’ and ’Overwrite’. If set up by ‘On c e’, HDD can reco rd until the Full state. If set by ‘Overwrite’, HDD will record conti nuously by start overwrite oldest data.
6 4 3.7.7.5.1 Cap acity Please refer to paragraph 3.7.3.1. 3.7.7.5.2 Function Set up for Removable HDD usage. Use rs can fix it for manual Backup, Auto backup, Extension. If it is fixed to manual backup, user s can use for manual backup. It is fixed to auto backup, system will a utomatically backup re cordin g image.
6 5 Figure 3-44 Set up AUX port screen 3.7.8.1 Active Set up Active state. Low/High will be dif ferent depend on machine.. 3.7.8.2 Function The following list contains a brie f description of each function. 3.7.8.2.1 Direction : IN • UNUSED: Do not use the AUX port.
6 6 3.7.9 Factory Default All of set-up date of system comes back to Factory default. Confirmation box on picture setting default w ill appear af ter entering default. User can restore the factory default setting after entering ‘yes’ key button. Please refer to paragraph 5.
6 7 Figure 3-46 Software Upgrade - After the unit recognizes the U SB flash drive and upgrading end, the unit will reboot. Figure 3-47 Ramdisk Upgrade 3.
6 8 3.8.1 Backup Device Set up the device for backup. HDD / USB/ CD-RW are available In order to use HDD for backup, the functi on of HDD should be setup as “Manual Backup” In the HDD Setting. 3.8.2 St art T ime Input the start of backup date and time.
6 9 3.9 System Information Figure 3-49 System Information 3.9.1 V ideo type It shows that present V ideo type of System is NTSC or P AL. 3.9.2 H/W version It shows the H/W V ersion of system. 3.9.3 S/W version It shows the S/W V ersion of system 3.9.4 KERNEL version It shows the S/W V ersion of KERNEL.
7 0 3.10 Search Menu Figure 3-50 Main Screen of Search 3.10.1 Search by T ime The recorded images are search ed by T ime, Channel, Event. DVR saves lat searching condition so it automatically displayed last search condition under search mode. ** Screen where the condition of search will be input.
7 1 3.10.1.2 Ending T ime Ending T ime and date for Search is input. The ending year range is from 1970 to 2037, and it is not p ossible to input any year after 2037. 3.10.1.3 Channel Select the channel for Search from Channel 1 ~ Channel 4. 3.10.1.4 Event Select the Event as follows.
7 2 3.10.2.1 Screen of search Figure 3-53 Search Screen of S till Image 3.10.3 Search of back up HDD The images that were backed up ma nually or automatically can be searched by T ime, Channel, Event.
7 3 3.11 PLA YBACK 3.11.1 PLA YBACK of recorded Images This function means that th e images recorded in the system are searched by T ime or Played back directly . 3.11.1.1 Method of playback In order to play back the recorded ima ges, put the Curser to the sele cted content in the Menu of Search, and press Button “ OK”.
7 4 3.11.1.3.1 Stop of Play back If user needs to stop play back, user should press button “ STOP” in the remote controller of in the system, and play back stops and live screen is coming back. 3.11.1.3.2 T empo rary S to p d uring Playback In order to stop temporarily playback, press button “ P AUSE”.
7 5 3.11.1.3.6 Audio ON / OFF In case of recorded image with Audio, u s er ca n on or of f by using the button “ AUDIO MUTE”. The Icon in the top of screen shows t he status (On / Of f) of AUDIO. 3.11.2 Playback of still image 3.11.2.1 Method of playback As the paragraph 3.
7 6 Playback stops and screen of search list appears. 3.11.2.3.2 Next screen Press Button “RIGHT” and next screen is played back. 3.11.2.3.3 Previous screen Press Button “LEFT” and previous screen is played back.
7 7 3.12.1 NET Displays the current network IP and the user connected to the network. (it substitutes the NET button on the remote control). Figure 3-58 Network Information 3.12.2 OSD T urns on/off the OSD (On Screen Display). It substitutes the OSD button on the r e m o t e c o n t r o l .
7 8 4. DVR-T4IP Client program 4.1 Overview of DVR-T4IP DVR-T4IP (Digital V ideo Recorder , MPEG-2, 4c hannel) has three types of client operation programs.
7 9 4.3 RAMS (Remote Access & Monitoring System) 4.3.1 Screen and button ① Event indication icon ( Motion, Sensor). The color will change upon event activation.
8 0 4.3.2 Connecting to DVR Click icon to open the DVR list. ① This box allows the user to select the IP address assigned to the selected unit. This is required for making a network connection. ② To create a new IP address & DVR select ion, enter the DVR name, DVR address, and port number.
8 1 4.3.3 Channel On/Off After connected, icon is changed to icon. Under this status, if users push icon, channel name & date displayed in front part of this screen will be phased out. Under bad network transmission condition, if users use selected channel, pre-allocated channel transmission will be better.
8 2 4.3.5 Full-screen display If you push this icon in the main menu, full screen form appears. If users press the key of ESC, you will return to the selected screen. 4.3.6 Program setup If users click this button in the main window, window of program setup appears.
8 3 ② Select the image of water mark to be input in the still image ③ Set up a program by user’s language ④ Set up whether alarm occurrence is on or off when motion detection or sensor icon activated. ⑤ Close the window without saving the setup ⑥ Close the window after saving the setup 4.
8 4 => DVR (Recording mode) 4.3.8 DVR playback search This button is used for playback search , playback, and backup functions for DVR and after logging in by admin.
8 5 ① Enter search time from start time to end time ② Check if user want to search event condition ③ Select targeted channel for search ④ Close DVR playback search ⑤ Start to search by selected searching condition ⑥ Previous research result will appears 4.
8 6 After selecting a file at list, push play button or do double clicks in order to watch playback pictures. ① Change present mode to playback mode ② Display playback picture derived from DVR sys.
8 7 When user use temporarily paus e image file move to forward Play stored files slowly. User can control by clicking this button Play stored files quickly. User c an control by clicking this button Playback button. Start playback previ ous files of present viewing files Playback button.
8 8 progress rate. Even backup, users can stop it by pushing button. Close DVR backup window with pushing button. (Even backup mode, it will be stopped & closed.) 4.3.11 DVR Setting This button is for linking into quick installation program is used to manage setting parameter of DVR easily.
8 9 ① Select check box in order to insert watermark into still image capture ② Save still image as user defined default file name if chosen ③ Save still image as user selected new file name if chosen ④ Insert keyword to user easy searching ⑤ Close still image capture window ⑥ Print still image capture file ⑦ Save still image.
9 0 ① Select the targeted channel changed recording time. Among this mode, Quad mean that timing choice for recording button on main menu ② Continuous recording until clients stop recording mode ③ Continuous recording until targeted minutes . Of course, it stopped manually by users ④ Continuous recording until targeted dat e & time.
9 1 4.3.18 HDD Information Orange: used parts of HDD, White: remaining par of HDD. Detailed HDD in formation will be activated on pushing this icon. ① Select hard disk ② It shows total capacity of.
9 2 ③ Display S/W update window of DVR system 4.3.20 S/W upgrade of DVR S/W upgrade window is activated on pushing S/W upgrade button in the program version check screen ① : Select targeted files .
9 3 4.3.21 Close program Closed Multiviewer program 4.4 UniPlayer 4.4.1 Screen and button ① Icon for event (Motion detec tion, Sensor). If events happen => , => the color of icon changes.
9 4 ⑮ Button for closing program 4.4.2 Search Users access to search files after push th is icon. As files are default mode, without knowing of files, users can access it.
9 5 => If there is nothing to special condition for search ing, all files saved in recording folder will be displayed on search window after searched.
9 6 4.4.2.2 Search option for still image ① Enter targeted recording date for search ② Enter targeted DVR name for search ③ Enter targeted channel ④ Enter keyword to classification to list ⑤.
9 7 => Search window after selected channel number 1 & selected date (June 22.004) as search option. 4.4.3 Searching by directory You can use it when you know the director y has AVI file or still image file. It will be set up default directory at first.
9 8 => AVI file Playing screen by searching scene 4.4.4 Still Image Capture Save replaying images into still image by capture. Besides users can capture image by push capture but ton for each channel or push ca pture button at the foot of a screen.
9 9 ① Select check box in order to insert watermark into still image capture ② Save still image as user defined default file name if chosen ③ Save still image as user selected new file name if chosen ④ Insert keyword to user easy searching ⑤ Close still image capture window ⑥ Print still image capture file ⑦ Save still image.
100 When user use temporarily paus e image file, move to backward When user use temporarily pause image file, move to forward. Play file slowly. Users can control by click this button. Play file quickly. User can control by click this button. 4.4.9 Water mark drawing When still image is display, if push this button watermark will be drawn.
101 Watermark viewing screen. If you find other colo r except black, white, blue color, image file must get damaged. 4.4.10 Panorama You can see the panorama screen when you pus h this button while file playing. (Button will change into like this button.
102 => Screen in panorama mode..
103 => Image when click one screen in panorama mode. 4.4.11 Check the program version. Click this icon logo to confirm version. 4.4.12 Close Program Close UniPlayer program.
104 4.5 MultiV iewer 4.5.1 Program login ① Insert program password. ② If inserted password is right, multiviewer runs. ③ Close program ④ Modify program password. ① After inserting current password, change password, & confirm password accordingly, changes program pass.
105 4.5.2 Screen and Button ① ICON for Event (Motion, Sensor ): If an Event is activated, => , => the color of icons change. ② BUTTON for channel (Connect/Disconnect, Capture, Record) ③ Channel SCREEN ③ Click on icon logo to check the version of program ⑤ Actual Time shows.
106 window appear. ① DVR List that user recorded, appears. ② Input DVR name, IP address, domain name, port ③ Input id name ④ Input id password ⑤ Delete the information selected in DVR List .
107 => Connected screen => If connection is impossible, it displays error defectives on screen. 4.5.4 Camera On/Off In order to connect to DVR in the main screen, please click button, and select DVR, and log in. After connection, please click one more time , and DVR is disconnected.
108 4.5.5 Full Screen Click the Full Screen button to open a screen in full view. Press ESC to return. . 4.5.6 Program Setup Click to launch Setup. C:Program Files / DVR / DVR Viewer C:Program Files .
109 ① Indicates the file location of the captured still Image ② Indicates the file location of the wate rmark image to be inserted in the still image ③ Select language ④ Set up whether alarm occurrence is on or off when motion detection or sensor icon activated.
1 1 0 ① Select HDD disk ② It shows total capacity of HDD ③ It shows the used capacity of HDD ④ It shows the free capacity of HDD ⑤ It shows both the used capacity of HDD and free space ⑥ Click to close the screen 4.5.10 Confirmation of V ersion of Program Click this icon to check the program version.
1 1 1 4.6 Quick Inst aller 4.6.1 Select model Clicks to select DVR model name and video type in order to set system parameters. 4.6.2 System p arameter setting * Right part s on System parameter setting window is same form as Main menu used in DVR system.
1 1 2 parameters of DVR. 5. System parameter->Default value se tting: Initialize parameters values. 6. Communication->Network: Communicate data through network. 7. Communication->Serial: Comm unicate dat a through se rial port (Setting preferable ComPort) 8.
1 1 3 5. Appendix 5.1 Inst alling HDD 5.1.1 Installing single hard disk drive The following procedure i s for installing either one internal HDD or one removable HDD. Please note that the Jumper setting must be set to MASTER. T o Install a single HDD in the Removable Bay , please follow these steps Prepare one HDD.
1 1 4 Slide-in the Removable Bay in to the DVR Lock the Removable Bay . 5.1.2 Installing two hard disk drives. The Jumper setting should be done as follows: - The Internal HDD: Master - The Removable Bay HDD: Slave Mount the HDD in the internal slot.
1 1 5 Once the HDD has been firmly mounted in t he DV R, connect the power cable and the data cable. T o install the second HDD in the Removable Bay , set the Jumper setting on the removable HDD to Slave. Follow the procedur e as listed in p aragraph1.
1 1 6 The CD-RW drive install ed in the DVR system.
1 1 7 5.2 T erminal Information 5.2.1 DSUB-9P (RS-232) 15 69 No Name Description 2 RXD Receive Data 3 TXD T ransmit Data 5 GND Signal Ground 5.2.2 DSUB-15P (PTZ / AUX / ALARM / SENSOR) 18 9 15 No Name.
1 1 8 5.3 Factory Default V alue 5.3.1 Main Menu Menu Main menu Sub menu1 Sub menu2 Sub menu3 Default V alue Remarks Channel Channel No CH-1~CH-4 Camera Name CH-1~CH-4 Camera Hide Off Model No NONE UR.
1 1 9 Password Blank T arget Path / FTP Length of Image 5 sec 5, 6, 7, 8, 9, 10 sec Sensor CH1~CH4 OFF FTP T rigger Setting Motion CH1~CH4 OFF Receiver Address 1~4 Blank E-Mail Address Setting Sender .
120 S tart Date (m/d) 01/01 End Date (m/d) 01/01 Apply Hour 00 Sensor OFF Motion OFF Buzzer Video Loss OFF Language ENGLISH System Log Mounted HDD 1 or 2 Write Mode Overw rite Forced Deletion (day s ago) OFF 1~100 Capacity Used Cap. / T ota l Cap. Internal HDD Format Capacity Used Cap.
121 5.3.2 Search Menu Menu Main menu Sub menu1 Sub menu2 Sub menu3 Default V alue Remarks Sta r t Ti m e Date : Date of Y esterday Ti m e : C u r r en t Ti m e End T ime Date : Date of T oday Ti m e :.
122 5.4 Protocol 5.4.1 Code t able No Protocol Description Remarks 1 kmute Audio Mute 2 krec Record 3 khdd HDD Information 4 knet Network user information 5 klog Log Display 6 kinfo System Information.
123 50 ks1 Shuttle left 1S tep 51 ks2 Shuttle left 2S tep 52 ks3 Shuttle left 3S tep 53 ks4 Shuttle left 4S tep 54 ks5 Shuttle left 5S tep 55 ks6 Shuttle left 6S tep 56 ks7 Shuttle left 7S tep 57 kjleft Jog left 58 kjright Jog right 59 kpower Power 5.
124 5.5 HDD recording time t able (Based on recording mode, Resolution, picture Quality, FPS) Recording time per HDD capacity (HR) TV System Record Mode Resolution Quality Frame Rate (fps/CH) 80GB 120GB 160GB 200GB 300GB 30 39.4 58.1 79.3 97.4 145.7 15 82.
125 Recording time per HDD capacity (HR) TV System Record Mode Resolution Quality Frame Rate (fps/CH) 80GB 120GB 160GB 200GB 300GB 25 42.5 62.6 85.5 105.1 157.1 12 71.2 104.9 143.2 176.0 263.1 Super Fine 6 141.2 208.1 284.3 349.3 522.1 25 61.6 90.8 124.
126 Speco T echnologies , 200 New Highway Amityville, N.Y . 1 1701 T oll Free : 1-800-645-5516 In Metro NY : 631-957-8700 Fax:631-957-9142 or 631-957-3880 Web:w w w.
デバイスSpeco Technologies DVR-T4IPの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Speco Technologies DVR-T4IPをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSpeco Technologies DVR-T4IPの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Speco Technologies DVR-T4IPの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Speco Technologies DVR-T4IPで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Speco Technologies DVR-T4IPを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSpeco Technologies DVR-T4IPの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Speco Technologies DVR-T4IPに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSpeco Technologies DVR-T4IPデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
