Speco TechnologiesメーカーVL7039IRVFの使用説明書/サービス説明書
ページ先へ移動 of 33
INSTR UCTION MANU AL DNR Bullet Da y/Night W eather -pr oof Camera Speco T echnologies is constantly de veloping pr oduct impro vements. W e reserve the right to modify pr oduct design and specifications without notice and without incurring any obligation.
1 Contents ◑ Contents ...................................................... 1 ◑ Precautions ................................................. 2, 3 ◑ Safety Instructions ...................................... 4 ◑ Package Contents .
2 Pr ecautions Do not install the camer a in extr eme temperatur e conditions. Do not touch the fr ont lens of the camer a. Never k eep the camera pointed dir ectly at strong light. Do not expose the camer a to r adioactivity. Do not install the camer a under unstable lighting conditions.
3 CA UTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOC K DO NOT REMOVE COVER(OR BACK). NO USER-SER VICEABLE P ARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. ISO14001 CA UTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOC K DO NOT REMOVE COVER(OR BACK).
4 S af et y Instructions Pr ecautions f or use Please handle this camer a car efully : ◑ This camera should be installed by qualied personnel only ◑ There are no user serviceable parts inside .
5 Package Contents Please make sure that the following items are included in the Package: 1) VL7038IR VF , VL7039IRVF • 1 Video T est Connector , P ower Jack • 1 3Axis Brack et Round Base Adaptor .
6 CAMERA INST ALLA TION jv uul j{ Gw v~ ly Gj hi sl G XU G~ ol uG |z punG XYG }v s{ zG kj GO G G WWG hP G YU G~ ol uG |z punG Y[G }v s{ zG hj GO [.
7 CAMERA INST ALLA TION Compatibility 1) VL7038IR VF , VL7039IRVF INTJBS INTCM.
8 CAMERA INST ALLA TION 1. VL7038IR VF , VL7039IRVF CAMERA ASSEMBL Y HEXAGON SOCKET SCREW M5X15, 4EA T APPING SCREW 4X25, 4EA 3AXIS BRACKER ROUND BASE ADAPTOR W ALL.
9 VL7038IRVF 600TV Lines DC Auto Iris Varifocal Lens(2.8mm-12mm) T rue Day/Night Capability ICR-IR Cut F ilter Removable 850nm IR LEDs * 63pcs ■ SPECIFICATIONS Day/Night Weather-proof Bullet Camera DC Auto Iris V arifocal Lens(2.
10 VL7039IRVF 600TV Lines DC Auto Iris Varifocal Lens(6mm-50mm) T rue Day/Night Capability ICR-IR Cut F ilter Removable 850nm IR LEDs * 63pcs ■ SPECIFICATIONS Day/Night Weather-proof Bullet Camera D.
11 CAMERA DIMENSION 1) VL7038IR VF / VL7039IR VF 5.31” 11 .57” 11 .22” 5.98” 4.76” 3.74” 3.42” 3.54” dia.
12 Gener al F eatur es ◑ Ultr a High S ensitivit y - T he built-in high sensitivity COLOR CCD produces a clear image even in 0Lux(B/W , IR-LED ON)or lower illumination.
13 OSD Contr ol Button 1. T ype A, T ype B, T ype C of OSD button could be used when it needs to OSD control. 2. T ype D is extra Option (wired Remote controller) ▲ Up button: Moves the cursor upwards. Use this button to select an item or adjust the parameters.
14 ● Menu S etup ● Lens S etting 1. Pr ess the F unction S etup switch. - Main setup menu is displayed on the monitor scr een. 3. THE Lens mode has sub menu items as listed below. - BRIGHTNESS : A djusts the video brightness. Using this function, you can contr ol the scr een brightness.
15 - F OCUS ADJ : T o adjust the DC lens f ocus corr ectly, you must activate the F ocus S ettings mode under each lens menu. A ctivate the F ocus Settings mode, adjust the lens f ocus, and then deactivate the settings mode. ☞ NO TE ■ If color r olling occurs w hen using a DC lens, set Shutter to Fixed (---).
16 ◆ A GC(A UT O G AIN CONTR OL) : The higher the gain le v el, the brighter the scr een - but the higher the noise. * OFF : Deactivates the A GC function. * L OW : Allows automatic gain contr ol fr om 5.3dB to 32dB. * HIGH : Allows automatic gain contr ol fr om 5.
17 ※ Select one of the f ollowing 5 modes, as appr opriate for your purpose. ◆ A TW : S elect this when the color temper atur e is between 1,700˚K and 11,000˚K. ◆ OUTDOOR : Select this when the color temperatur e is between 1,700˚K and 11,000˚K.
18 ● Backlight S etting Unlik e conv entional camer as, the SIR-4160 is designed to deliver a distinctiv e subject and back gr ound at the same time, ev en when the subject is backlight, by using the f eatur es of the pr oprietary W-V DSP chip.
19 BLC SETUP HLC SETUP Press Set to Return Press Set to Return LEVEL TOP BOTTOM LEFT RIGHT LEVEL LIMITS MASK COLOR MASK TONE TOP BOTTOM LEFT RIGHT LOW 38 109 54 121 MIDDLE NIGHT ONL Y BLACK 1 5 120 5 .
20 3. Set the DNR3 mode to 'ON' and press the F unction S etup switch. Then you can adjust the noise r eduction le vel. ☞ NO TE ■ Y ou cannot set the DNR3 to ‘ON’ or ‘OFF’ w hen the AGC mode of the EXPOSURE menu is ‘OFF’.
21 ◆ A UT O : The mode is switched to 'Color' in a normal envir onment, but switches to 'B/W' mode when ambient illumination is low. T o set up the switching time f or A UT O mode, pr ess the F unction S etup switch. Y ou can turn on or off the burst signal on B/W mode.
22 2. Select a desired mode using the F unction S etup switch. SPECIAL IMAGE SETUP 1.IMAGE ADJ 2.CAM TITLE 3.SYNC 4.MOTION DET 5.PRIV ACY 6.DIS 7.COMM ADJ 8.LANGUAGE 9.RETRUN 1.V -REV 2.H-REV 3.D-ZOOM 4.FONT COLOR 5.SHARPNESS 6.MONITOR 7.RETURN OFF INT OFF OFF OFF ENGLISH OFF OFF WHITE ON LCD ◆ IMA GE ADJ.
23 ☞ NO TE ■ W hen the V -REV or H-REV mode is enabled, the text on the screen does not ip. ■ If you increase the SHARPNESS lev el too high, the pictur e may become distor ted or noise may appear . ☞ NO TE ■ W hen the CAM TITLE menu is ‘OFF’, no title will be displayed on the monitor screen ev en if you enter one.
24 ☞ NO TE ■ W hen using AC po wer a t 60Hz(NTSC), 50Hz(P AL), fr equency , you can use the L/L type synchronization. ■ W hen the pow er is DC 12V , the SYNC menu is xed to the ‘INT’ mode.
25 1) When the SPECIAL menu scr een is displayed, pr ess the Function Setup switch so that the arrow indicates 'PRIV A C Y'. 2) Set up the mode using the Function Setup switch. - ARE A : Y ou can select up to 12 PRIV A C Y ar eas. - MODE : Determines whether to use the ar ea selected in the ARE A.
26 ◆ L ANGU A GE : Y ou can select the menu language accor ding to your r equir ements. ◆ RE TURN : S elect this to sav e the SPECIAL menu settings and r eturn to the MAIN SE TUP menu. ● E xit S etting Select a desired EXIT mode using the Function Setup Switch.
27 ● T r ouble Shooting PR OBLEM Northing appears on the screen. ☞ Check the power cable, power supply output and video connection between the camera and monitor . ☞ Are the camera lens or the lens glass dirty? Clean the lens / glass with a soft clean cloth.
28.
29 ▶ MEMO.
30 ▶ MEMO.
31 ▶ MEMO.
200 New Highway Amityville, NY 1 1701 631-957-8700 1 800 645 5516 www .specotech.com.
デバイスSpeco Technologies VL7039IRVFの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Speco Technologies VL7039IRVFをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSpeco Technologies VL7039IRVFの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Speco Technologies VL7039IRVFの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Speco Technologies VL7039IRVFで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Speco Technologies VL7039IRVFを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSpeco Technologies VL7039IRVFの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Speco Technologies VL7039IRVFに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSpeco Technologies VL7039IRVFデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
