Stamina ProductsメーカーVG1500の使用説明書/サービス説明書
ページ先へ移動 of 22
50-3000 ST AMINA PRODUCTS MADE IN CHINA Product May V ary Slightly From Pictured. 2007, 10 Exercise ca n present a health risk. Con sult a physicia n bef ore beginning a ny exercise progra m with this equipment. If you feel faint or dizzy , i mmedi ately discontinue use of this equi pment.
T ABLE OF CONTENTS 2 W arm-up a nd Cool-Down 16 W arra nty 17 Product Parts Drawing 18 Parts List 19 Note s 21 Fax/Mail Ordering Form 22 Page Page Safety In struction s 2 Before Y ou Begin 4 Hardware .
THAN K YOU FOR PURCHASING THE VIPER V G1500 TM Leverage Syste m 3 Should you have a ny question s, ple a se call our Customer Service De partment toll-free number , 1 (800) 375-7520 Monday - Thursday , 7:30 A.M. - 5:00 P .M. Central T ime. Friday , 8:00 A.
4 Lat Bar Ca ble Ba ck Cushion Foa m Roller Leg Lift Left Ha ndlebar Lever Arm Foa m Roller Ankle Cuff Ba se Fra me Se at Cushion Upright Long Chain THE FOLLOWING TOOLS ARE REQUIRED FOR ASSEMBL Y : Straight Bar Ha ndle Left Leverage Arm Lower Upright BEFORE YOU BEGIN Tha nk you for choosing the V G1500 TM Leverage Syste m.
5 Part No. and De scription Qty HAR D W ARE IDENTIFICA TION CHAR T This chart is provided to help identify the hardware used in the a ssembly process. Pla ce the wa shers, the end of the bolts, or screws on the circles to che ck for the corre ct di a meter .
ASSEMBL Y INSTRUCTIONS 6 Pla ce all parts from the box in a cleared area a nd position them on the floor in front of you. Re move all pa cking materials from your are a and pla ce the m ba ck into the box. Do not dispose of the pa cking materials until a ssembly is completed.
ASSEMBL Y INSTRUCTIONS 7 STEP 3 Atta ch the LOWER UPRIGHT(6) to the BASE FRAME(1) with the SUPPORT BRACKET(5), HEX BOL TS (M12x1.75x70mm)(72), W ASHERS(M12)(80), and NYLOCK NUTS(M12x1.75)(82). Do not tighten the bolts. Atta ch the LOW UPRIGHT(6) to the REAR ST ABILIZER(2) with HEX BOL TS(M12x1.
ASSEMBL Y INSTRUCTIONS 8 STEP 6: Run the SMALL BALL END of the CABLE(45) through the slot at the top end of the UPRIGHT(7). Atta ch the CABLE(45) to the UPRIGHT(7) at "A" with the LAR GE PULLEY(44), a HEX BOL T (M10x1.5x95mm)(70), two W ASHERS(M10)(81), a nd a NYLOCK NUT(M10x1.
ASSEMBL Y INSTRUCTIONS 9 STEP 9 Refer to the inset drawing. Atta ch the SLIDER SUPPORT(14) to the LOWER UPRIGHT(6) with HEX BOL T (M12x1.75x160mm)(77), W ASHERS(M12)(80), a nd NYLOCK NUT(M12x1.75)(82). Do not over tighten the bolt, a s the SLIDER SUPPORT(14) must be able to pivot smoothly .
ASSEMBL Y INSTRUCTIONS 10 STEP 12 Atta ch the SEA T FRAME(9) to the LOWER UPRIGHT(6) with HEX BOL TS(M12x1.75x100mm)(75), W ASHERS(M12)(80), a nd NYLOCK NUTS(M12x1.75)(82). STEP 13 Atta ch the LEG LIFT(10) to the SEA T FRAME(9) with HEX BOL T(M12x1.75x90mm)(74), W ASHERS (M12)(80), an d NYLOCK NUT(M12x1.
ASSEMBL Y INSTRUCTIONS 11 STEP 16 Atta ch the FOAM SUPPORTS(15) to both sides of the LOWER UPRIGHT(6) with HEX BOL TS (M12x1.75x100mm)(75), W ASHERS(M12)(80), a nd NYLOCK NUTS(M12x1.75)(82). STEP 17 Atta ch the HEAD REST(35) and BACK CUSHION(36) to the BACK SUPPORT(12) with HEX BOL TS (M10x1.
ASSEMBL Y INSTRUCTIONS STEP 19: There is a n "L" decal on the LEFT LEVERAGE ARM(17), a nd a n "R" decal on the RIGHT LEVERAGE ARM(18). Slide the RIGHT LEVERAGE ARM(18) onto the shaft at right side of the ARM BRACE(16) a nd secure with LARGE W ASHER(M12xø 31mm)(79) a nd NYLOCK NUT(M12x1.
ASSEMBL Y INSTRUCTIONS STEP 22 Slide a FOAM ROLLER(39) onto a SUPPORT TUBE(38) a nd screw a SECURING CAP(41) onto the end of the SUPPORT TUBE(38). Insert the other end of the SUPPORT TUBE(38) through the hole in the LEG LIFT(10).
SETTING UP THE ACCESSORIES 14 STRAIGHT BAR HANDLE(51), ANKLE CUFF(53) The STRAIGHT BAR HANDLE(51) a nd ANKLE CUFF(53) ca n be atta ched to the ball end of the CABLE(45) at the bottom of the LEG LIFT(10) with two QUICK LINKS(47) a nd one of the CHAINS(55, 56).
15 MAINTENANCE The safety a nd integrity designed into the V G1500 TM Leverage System ca n only be maintained when the V G1500 TM Leverage Syste m is regularly exa mined f or da mage a nd wear . Speci al attention should be given to the following: V erify that the warning a nd notice labels are in pla ce a nd ea sy to rea d.
16 W ARM-UP a nd COOL-DOW N W arm-up The purpose of warming up is to pre pare your body for exercise a nd to mini mize injuries. W arm up for two to f ive minutes bef ore strength-training or aerobic exercising. Perform a ctivities that raise your heart rate a nd warm the working muscles.
17 W ARRANTY LIMITED W ARRANTY MODEL 50-3000 Sta mina Products, Inc. warra nts that this product will be free from defects in materi als a nd workma nshi p under normal use, service a nd proper operation f or a period of 90 days on the parts a nd three years on the fra me from the date of the original purcha se from a n authorized retailer .
PRODUCT P ARTS DR A WING 18 FRONT BACK.
P ARTS LIST DIAGRAM# P ART NAME QTY 1 Ba se Fra me 1 2 Rear Sta bilizer 1 3 Rear Support 1 4 Foot Plate 1 5 Support Bra cket 1 6 Lower Upright 1 7 Upright 1 8 Lever Arm 1 9 Seat Fra me 1 10 Leg Lift 1.
20 P ARTS LIST DIAGRAM# P ART NAME QTY 48 Hook Sleeve 2 49 Lat Bar 1 50 Foa m Gri p 2 51 Straight Bar Ha ndle 1 52 Ha nd Grip 2 53 Ankle Cuf f 1 54 Ab Curl Stra p 1 55 Long Chain (10 Links) 1 56 Short.
21 NOTES.
IMPORT ANT : Before filling out the form below ma ke sure you have the right information. Refer to the parts list to make sure you're ordering the right parts! Detach a nd M ail or Fax the Form Below Sta mina Products, Inc.
デバイスStamina Products VG1500の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Stamina Products VG1500をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはStamina Products VG1500の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Stamina Products VG1500の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Stamina Products VG1500で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Stamina Products VG1500を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はStamina Products VG1500の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Stamina Products VG1500に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちStamina Products VG1500デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。