Star MicronicsメーカーLine Thermal/Dot Printerの使用説明書/サービス説明書
ページ先へ移動 of 209
Line Thermal/Dot Printer ST AR Line Mode Command Specications Rev . 0.00 Star Micronics Co., Ltd. Special Products Operating Division.
Contents 1. GENERAL DESCRIPTION 1-1 2. COMMAND FUNCTION LIST 2-1 3. COMMAND DET AILS 3-1 3-1) Explanation of T erms 3-1 3-2) Exception processing 3-2 3-3) Standard Command Details 3-3 3-3-1) Font styl.
ESC Q n 3-38 HT 3-39 ESC D n1 n2 … nk NUL 3-39 ESC D NUL 3-40 ESC GS A n1 n2 3-40 ESC GS R n1 n2 3-41 ESC GS a n 3-42 3-3-7) Download 3-43 ESC & c1 c2 n d1 .
4. CHARACTER CODE T ABLES 4-1 5. APPENDIX 5-1 5-1) Appendix1:BarCodeSpecicationDetails<Thermal> 5- 1 5-1-1) Code 39 5-1 5-1-2) Interleaved 2 of 5 5-1 5-1-3) JAN/EAN/UP.
.
Rev . 0.00 1-1 ST ARLIneModeCommandSpecications 1. GENERAL DESCRIPTION ThisspecicationsdocumentdescribesthecommandspecicationsfortheST ARMODEonhybridprinters. Information contained herein applies to models with the following conditions.
Rev . 0.00 2-1 ST ARLIneModeCommandSpecications 2. COMMAND FUNCTION LIST • Standard Commands Class Commands Name Thermal Slip, V alidation Font style ESC RS F Select font - and charac.
Rev . 0.00 2-2 ST ARLIneModeCommandSpecications Class Commands Name Thermal Slip, V alidation Page control FF Form feed - ESC C Set page length to n lines - ESC C 0 Set page length in n.
Rev . 0.00 2-3 ST ARLIneModeCommandSpecications Class Commands Name Thermal Slip, V alidation Kanji Character ESC p Set JIS Kanji Character mode ← ESC q Cancel JIS Kanji Character mod.
Rev . 0.00 2-4 ST ARLIneModeCommandSpecications • Raster Related Commands Class Commands Name Thermal Slip, V alidation Raster commands ESC * r R Initialize raster mode - ESC * r A En.
Rev . 0.00 2-5 ST ARLIneModeCommandSpecications • Mark Commands Class Commands Name Thermal Slip, V alidation Mark Commands ESC GS * 0 Print mark - ESC GS * 1 Specify mark height and .
Rev . 0.00 2-6 ST ARLIneModeCommandSpecications • Page Function Commands Class Commands Name Thermal Slip, V alidation Page Function ESC GS h 0 180˚inversionfunction - ES.
Rev . 0.00 3-1 ST ARLineModeCommandSpecications 3. COMMAND DET AILS 3-1) Explanation of T erms • Reception buffer The buffer for storing data (reception data) received from the host, as it is called the reception buffer. Reception data is temporarily stored in the reception buffer, then processed sequentially.
Rev . 0.00 3-2 ST ARLIneModeCommandSpecications 3-2) Exception processing 1) Undefined codes Codesfrom<00>Hto<1F>Haretargeted.Whencodesnotdefinedascommandsinthisregionarereceived,theyare discarded.
Rev . 0.00 3-3 ST ARLineModeCommandSpecications 3-3) Standard Command Details 3-3-1) Font style and character set ESC RS F n [Name] Select font [Code] ASCII ESC RS F n Hexadecimal 1B 1E.
Rev . 0.00 3-4 ST ARLIneModeCommandSpecications ESC GS t n [Name] Select code page [Code] ASCII ESC GS t n Hexadecimal 1B 1D 74 n Decimal 27 29 1 16 n [Dened Area] Thermal : 0 ≤.
Rev . 0.00 3-5 ST ARLineModeCommandSpecications ESC GS = n1 n2 da1 da2 … dak db1 db2 … dbk [Name] Write blank code page data [Code] ASCII ESC GS = n1 n2 da1 da2 .. dak db1 db2 .. dbk Hexadecimal 1B 1D 3D n1 n2 da1 da2 .. dak db1 db2 .
Rev . 0.00 3-6 ST ARLIneModeCommandSpecications ESC R n [Name] Specify international character set [Code] ASCII ESC R n Hexadecimal 1B 52 n Decimal 27 82 n [Dened Area] Thermal : .
Rev . 0.00 3-7 ST ARLineModeCommandSpecications ESC / N [Name] Specify/cancel slash zero [Code] ASCII ESC / n Hexadecimal 1B 2F n Decimal 27 47 n [Dened Area] Thermal : n = 0, 1, .
Rev . 0.00 3-8 ST ARLIneModeCommandSpecications ESC M [Name] (Thermal) Specify 12 dot pitch/(Slip) specify 7 x 9 font (half dots) (default) [Code] ASCII ESC M Hexadecimal 1B 4D Decimal .
Rev . 0.00 3-9 ST ARLineModeCommandSpecications ESC : [Name] (Thermal) Specify 16 dot pitch/(Slip) specify 5 x 9 font (3P-1) [Code] ASCII ESC : Hexadecimal 1B 3A Decimal 27 58 [Dened.
Rev . 0.00 3-10 ST ARLIneModeCommandSpecications ESC 6 [Name] Specify IBM character set #2 [Code] ASCII ESC 6 Hexadecimal 1B 36 Decimal 27 54 [Dened Area] Thermal : - Slip : - V a.
Rev . 0.00 3-1 1 ST ARLineModeCommandSpecications 3-3-2) Character Expansion Settings ESC i n1 n2 [Name] Set/cancel the double wide/high [Code] ASCII ESC i n1 n2 Hexadecimal 1B 69 n1 n2.
Rev . 0.00 3-12 ST ARLIneModeCommandSpecications ESC W n [Name] Specify/cancel expanded wide [Code] ASCII ESC W n Hexadecimal 1B 57 n Decimal 27 87 n [Dened Area] Thermal : 0 ≤ .
Rev . 0.00 3-13 ST ARLineModeCommandSpecications ESC h n [Name] Specify/cancel expanded high [Code] ASCII ESC h n Hexadecimal 1B 68 n Decimal 27 104 n [Dened Area] Thermal : 0 ≤.
Rev . 0.00 3-14 ST ARLIneModeCommandSpecications SO [Name] Set double wide [Code] ASCII SO Hexadecimal 0E Decimal 14 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V a.
Rev . 0.00 3-15 ST ARLineModeCommandSpecications ESC SO [Name] Set double high [Code] ASCII ESC SO Hexadecimal 1B 0E Decimal 27 14 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : Double high expansion cancelled.
Rev . 0.00 3-16 ST ARLIneModeCommandSpecications 3-3-3) Print mode ESC E [Name] Select emphasized printing [Code] ASCII ESC E Hexadecimal 1B 45 Decimal 27 69 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : Emphasized printing cancelled.
Rev . 0.00 3-17 ST ARLineModeCommandSpecications ESC F [Name] Cancel emphasized printing [Code] ASCII ESC F Hexadecimal 1B 46 Decimal 27 70 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : Emphasized printing cancelled.
Rev . 0.00 3-18 ST ARLIneModeCommandSpecications ESC – n [Name] Specify/cancel underling mode [Code] ASCII ESC - n Hexadecimal 1B 2D n Decimal 27 45 n [Dened Area] Thermal : n =.
Rev . 0.00 3-19 ST ARLineModeCommandSpecications ESC _ n [Name] Specify/cancel upperline [Code] ASCII ESC _ n Hexadecimal 1B 5F n Decimal 27 95 n [Dened Area] Thermal : n = 0, 1, .
Rev . 0.00 3-20 ST ARLIneModeCommandSpecications ESC 4 [Name] (Thermal) Specify black/white inversion/(Slip) specify black/white inversion, red/black color ( substitute function ) [Code.
Rev . 0.00 3-21 ST ARLineModeCommandSpecications ESC GS 4 m n [Name] Select red/black substitute function [ESC 4/5 setting] [Code] ASCII ESC GS 4 m n Hexadecimal 1B 1D 34 m n Decimal 27.
Rev . 0.00 3-22 ST ARLIneModeCommandSpecications Precautionsforselecting<Option1> 1. Prints white/black inverted characters using 5 x 9 fonts regardless of the current font size setting. 2. Inserts a one dot string of black printing to the head of the white/black inverted characters.
Rev . 0.00 3-23 ST ARLineModeCommandSpecications SI [Name] Select upside-down printing [Code] ASCII SI Hexadecimal 0F Decimal 15 [Dened Area] Thermal : - Slip : - V alidation : - .
Rev . 0.00 3-24 ST ARLIneModeCommandSpecications ESC RS i n [Name] Specify/cancel character rotated mode [Code] ASCII ESC RS i n Hexadecimal 1B 1E 69 n Decimal 27 30 105 n [Dened .
Rev . 0.00 3-25 ST ARLineModeCommandSpecications 3-3-4) Line Spacing LF [Name] Line feed [Code] ASCII LF Hexadecimal 0A Decimal 10 [Dened Area] Thermal : - Slip : - V alidation : .
Rev . 0.00 3-26 ST ARLIneModeCommandSpecications ESC a n [Name] Feed paper n lines [Code] ASCII ESC a n Hexadecimal 1B 61 n Decimal 27 97 n [Dened Area] Thermal : 1 ≤ n ≤ 127 .
Rev . 0.00 3-27 ST ARLineModeCommandSpecications ESC z n [Name] Select line feed amount [Code] ASCII ESC z n Hexadecimal 1B 7A n Decimal 27 122 n [Dened Area] Thermal : n = 1, 49 .
Rev . 0.00 3-28 ST ARLIneModeCommandSpecications ESC 1 [Name] (Thermal) Specify 3 mm line feed amount/(Slip) specify 7/72 inch line feed amount [Code] ASCII ESC 1 Hexadecimal 1B 31 Deci.
Rev . 0.00 3-29 ST ARLineModeCommandSpecications ESC j n [Name] Reverse paper feed [Code] ASCII ESC j n Hexadecimal 1B 6A n Decimal 27 106 n [Dened Area] Thermal : - Slip : 0 ≤ .
Rev . 0.00 3-30 ST ARLIneModeCommandSpecications ESC A n [Name] Denes(thermal)a3mm/4mmlinefeedamount/Denes(slip)n/72inchpitchlinefeed .
Rev . 0.00 3-31 ST ARLineModeCommandSpecications ESC 3 n [Name] Specify n/216 inch paper feed [Code] ASCII ESC 3 n Hexadecimal 1B 33 n Decimal 27 51 n [Dened Area] Thermal : - Sli.
Rev . 0.00 3-32 ST ARLIneModeCommandSpecications 3-3-5) Page Control Commands FF [Name] Form feed [Code] ASCII FF Hexadecimal 0C Decimal 12 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : - Slip : - V alidation : - [Function] <Thermal> Executes a form feed.
Rev . 0.00 3-33 ST ARLineModeCommandSpecications ESC C n [Name] Set page length to n lines [Code] ASCII ESC C n Hexadecimal 1B 43 n Decimal 27 67 n [Dened Area] Thermal : 1 ≤ n .
Rev . 0.00 3-34 ST ARLIneModeCommandSpecications ESC C 0 n [Name] Set n x 24 mm page length [Code] ASCII ESC C 0 n Hexadecimal 1B 43 00 n Decimal 27 67 0 n [Dened Area] Thermal : .
Rev . 0.00 3-35 ST ARLineModeCommandSpecications VT [Name] Feed paper to vertical tab position [Code] ASCII VT Hexadecimal 0B Decimal 1 1 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : - Slip : - V alidation : - [Function] <Thermal> Feeds paper to the next vertical tab position.
Rev . 0.00 3-36 ST ARLIneModeCommandSpecications ESC B n1 n2 … nk NUL [Name] Set vertical tab position [Code] ASCII ESC B n1 n2 .. nk NUL Hexadecimal 1B 42 n1 n2 .
Rev . 0.00 3-37 ST ARLineModeCommandSpecications 3-3-6) Horizontal Direction Printing Position ESC l n [Name] Set left margin [Code] ASCII ESC l n Hexadecimal 1B 6C n Decimal 27 108 n [.
Rev . 0.00 3-38 ST ARLIneModeCommandSpecications ESC Q n [Name] Set right margin [Code] ASCII ESC Q n Hexadecimal 1B 51 n Decimal 27 81 n [Dened Area] Thermal : 0 ≤ n ≤ 255 Sl.
Rev . 0.00 3-39 ST ARLineModeCommandSpecications HT [Name] Move horizontal tab [Code] ASCII HT Hexadecimal 09 Decimal 9 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : - Slip : - V alidation : - [Function] Move print position to next horizontal tab position.
Rev . 0.00 3-40 ST ARLIneModeCommandSpecications ESC D NUL [Name] Clear horizontal tab [Code] ASCII ESC D NUL Hexadecimal 1B 44 00 Decimal 27 68 0 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : - Slip : - V alidation : - [Function] Clears the currently set horizontal tab.
Rev . 0.00 3-41 ST ARLineModeCommandSpecications ESC GS R n1 n2 [Name] Move relative position [Code] ASCII ESC GS R n1 n2 Hexadecimal 1B 1D 52 n1 n2 Decimal 27 29 82 n1 n2 [Dened .
Rev . 0.00 3-42 ST ARLIneModeCommandSpecications ESC GS a n [Name] Specify position alignment [Code] ASCII ESC GS a n Hexadecimal 1B 1D 61 n Decimal 27 29 97 n [Dened Area] Therma.
Rev . 0.00 3-43 ST ARLineModeCommandSpecications 3-3-7) Download ESC & c1 c2 n d1 . . . d48 [Name] Register 12 x 24 dot font download characters [Code] ASCII ESC & c1 c2 n d1 .. d48 Hexadecimal 1B 26 c1 c2 n d1 .. d48 Decimal 27 38 c1 c2 n d1 .
Rev . 0.00 3-44 ST ARLIneModeCommandSpecications ESC & c1 c2 n [Name] Delete 12 x 24 dot font download characters [Code] ASCII ESC & c1 c2 n Hexadecimal 1B 26 c1 c2 n Decimal 27.
Rev . 0.00 3-45 ST ARLineModeCommandSpecications ESC & NUL n1 n2 [m d1 d2 d3 d4 d5 (d6 d7)] n 2 - n 1 + 1 [Name] Register download characters [Code] ASCII ESC & NUL n1 n2 [m d1 .
Rev . 0.00 3-46 ST ARLIneModeCommandSpecications [Ex.:] When selecting 7 x 9 fonts, and defining the character to 21H: ESC & NUL n1 n2 m d1 d2 d3 d4 d5 d6 d7 Code (Hexadecimal) 1B 26 00 21 21 80 3E 40 88 00 88 40 3E (1 when printing corresponding bits, and 0 for no print)) [Ex.
Rev . 0.00 3-47 ST ARLineModeCommandSpecications ESC % N [Name] Specify/cancel ANK download characters [Code] ASCII ESC % n Hexadecimal 1B 25 n Decimal 27 37 n [Dened Area] Therma.
Rev . 0.00 3-48 ST ARLIneModeCommandSpecications 3-3-8) Bit Image Graphics ESC K n1 n2 d1 … dk [Name] Standard density bit image [Code] ASCII ESC K n1 n2 d1 .
Rev . 0.00 3-49 ST ARLineModeCommandSpecications <Slip>,<Validation> This command prints bit images with only the data count determined by n1. The amount of data that can be printed in one line is limited to the total dot count.
Rev . 0.00 3-50 ST ARLIneModeCommandSpecications ESC L n1 n2 d1 … dk [Name] High density bit image [Code] ASCII ESC L n1 n2 d1 .. dk Hexadecimal 1B 4C n1 n2 d1 .
Rev . 0.00 3-51 ST ARLineModeCommandSpecications ESC k n1 n2 d1 … dk [Name] Fine bit image [Code] ASCII ESC k n1 n2 d1 .. dk Hexadecimal 1B 6B n1 n2 d1 .
Rev . 0.00 3-52 ST ARLIneModeCommandSpecications ESC X n1 n2 d1 … dk [Name] Fine density bit image (Wire-dot, 24 pin compatible) [Code] ASCII ESC X n1 n2 d1 .
Rev . 0.00 3-53 ST ARLineModeCommandSpecications ESC ^ m n1 n2 d1 d2 … dk [Name] 9 Dot bit image [Code] ASCII ESC ^ m n1 n2 d1 d2 .. dk Hexadecimal 1B 5E m n1 n2 d1 d2 .
Rev . 0.00 3-54 ST ARLIneModeCommandSpecications 3-3-9) Logo ESC FS q n [x1 1 x12 y1 1 y12 d1 … dk]1 … [xn1 xn2 yn1 yn2 d1 … dk] n [Name] Register logo [Code] ASCII ESC FS q n [x1 1 x12 y1 1 y12 d1 .. dk]1 .. [xn1 xn2 yn1 yn2 d1 .
Rev . 0.00 3-55 ST ARLineModeCommandSpecications (Note) Registration data shared by all stations, and modes. If this command is used frequently , there is the possibility of damaging the non-volatile memory . Write to the non-volatile memory less than 10 times in one day .
Rev . 0.00 3-56 ST ARLIneModeCommandSpecications ESC FS p n m [Name] Print logo [Code] ASCII ESC FS p n m Hexadecimal 1B 1C 70 n m Decimal 27 28 1 12 n m [Dened Area] Thermal : 1 .
Rev . 0.00 3-57 ST ARLineModeCommandSpecications ESC RS L m [Name] Logo batch control [Code] ASCII ESC RS L m Hexadecimal 1B 1E 4C m Decimal 27 30 76 m [Dened Area] Thermal : 0 .
Rev . 0.00 3-58 ST ARLIneModeCommandSpecications 3-3-10) Bar Codes ESC b n1 n2 n3 n4 d1 . . . dk RS [Name] Print bar code [Code] ASCII ESC b n1 n2 n3 n4 d1 .. dk RS Hexadecimal 1B 62 n1 n2 n3 n4 d1 .. dk 1E Decimal 27 98 n1 n2 n3 n4 d1 .
Rev . 0.00 3-59 ST ARLineModeCommandSpecications • n3: Bar Code Mode Selection n3 Bar Codes T ypes UPC-E, UPC-A, JAN/EAN8 Code39, NW-7 ITF JAN/EAN13, Code128, Code93 1, 49 Minimum mod.
Rev . 0.00 3-60 ST ARLIneModeCommandSpecications 3-3-1 1) Cutter Control ESC d n [Name] Auto-cutter: [Code] ASCII ESC d n Hexadecimal 1B 64 n Decimal 27 100 n [Dened Area] Thermal.
Rev . 0.00 3-61 ST ARLineModeCommandSpecications 3-3-12) External Device Drive ESC BEL n1 n2 [Name] Set external drive device 1 pulse width [Code] ASCII ESC BEL n1 n2 Hexadecimal 1B 07 .
Rev . 0.00 3-62 ST ARLIneModeCommandSpecications BEL [Name] External device 1 drive instruction [Code] ASCII BEL Hexadecimal 07 Decimal 7 [Dened Area] Thermal : - Slip : - V alida.
Rev . 0.00 3-63 ST ARLineModeCommandSpecications SUB [Name] External device 2 drive instruction [Code] ASCII SUB Hexadecimal 1A Decimal 26 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : - Slip : - V alidation : - [Function] Drives external device 2.
Rev . 0.00 3-64 ST ARLIneModeCommandSpecications ESC GS BEL m t1 t2 [Name] Ring buzzer [Code] ASCII ESC GS BEL m t1 t2 Hexadecimal 1B 1D 07 m t1 t2 Decimal 27 29 7 m t1 t2 [Dened .
Rev . 0.00 3-65 ST ARLineModeCommandSpecications ESC GS EM DC1 m n1 n2 [Name] Set external buzzer drive pulse condition [Code] ASCII ESC GS EM DC1 m n1 n2 Hexadecimal 1B 1D 19 1 1 m n1 .
Rev . 0.00 3-66 ST ARLIneModeCommandSpecications ESC GS EM DC2 m n1 n2 [Name] Execute external buzzer drive [Code] ASCII ESC GS EM DC2 m n1 n2 Hexadecimal 1B 1D 19 12 m n1 n2 Decimal 27.
Rev . 0.00 3-67 ST ARLineModeCommandSpecications 3-3-13) Print Settings ESC RS d n [Name] Set print density [Code] ASCII ESC RS d n Hexadecimal 1B 1E 64 n Decimal 27 30 100 n [Dened.
Rev . 0.00 3-68 ST ARLIneModeCommandSpecications ESC RS r n [Name] Set printing speed [Code] ASCII ESC RS r n Hexadecimal 1B 1E 72 n Decimal 27 30 1 14 n [Dened Area] Thermal : 0 .
Rev . 0.00 3-69 ST ARLineModeCommandSpecications 3-3-14) Status ESC RS a n [Name] Set status transmission conditions [Code] ASCII ESC RS a n Hexadecimal 1B 1E 61 n Decimal 27 30 97 n [D.
Rev . 0.00 3-70 ST ARLIneModeCommandSpecications ESC ACK SOH [Name] Real-time printer status (ASB Status) [Code] ASCII ESC ACK SOH Hexadecimal 1B 06 01 Decimal 27 6 1 [Dened Area].
Rev . 0.00 3-71 ST ARLineModeCommandSpecications EOT [Name] Real-time printer status (2) [Code] ASCII EOT Hexadecimal 04 Decimal 4 [Dened Area] Thermal : - Slip : - V alidation : .
Rev . 0.00 3-72 ST ARLIneModeCommandSpecications ESC RS E n [Name] Initialize ASB ETB counter , and ETB status. [Code] ASCII ESC RS E n Hexadecimal 1B 1E 45 n Decimal 27 30 69 n [Den.
Rev . 0.00 3-73 ST ARLineModeCommandSpecications 3-3-15) Kanji Characters ESC p [Name] Specify JIS Kanji character mode [Code] ASCII ESC p Hexadecimal 1B 70 Decimal 27 1 12 [Dened.
Rev . 0.00 3-74 ST ARLIneModeCommandSpecications ESC $ n [Name] Specify/cancel JIS Kanji character mode [Code] ASCII ESC $ n Hexadecimal 1B 24 n Decimal 27 36 n [Dened Area] Therm.
Rev . 0.00 3-75 ST ARLineModeCommandSpecications ESC s n1 n2 [Name] Set two-byte Kanji characters left/right spaces [Code] ASCII ESC s n1 n2 Hexadecimal 1B 73 n1 n2 Decimal 27 1 15 n1 n.
Rev . 0.00 3-76 ST ARLIneModeCommandSpecications ESC t n1 n2 [Name] Set single-byte Kanji characters left/right spaces [Code] ASCII ESC t n1 n2 Hexadecimal 1B 74 n1 n2 Decimal 27 1 16 n.
Rev . 0.00 3-77 ST ARLineModeCommandSpecications ESC r c1 c2 d1 … dk [Name] Register Chinese download characters [Code] ASCII ESC r c1 c2 d1 .
Rev . 0.00 3-78 ST ARLIneModeCommandSpecications <Slip>,<Validation> The defined ranges are shown below. Specications c1 c2 Registration count Japanese Language Kanji characters c1 = 77h 21h ≤ c2 ≤ 7Eh 94 Characters They are designed as shown below and data is sent sequentially.
Rev . 0.00 3-79 ST ARLineModeCommandSpecications ESC u n [Name] Specify two-byte 16 x 16 dot Kanji character (Single density/double density) [Code] ASCII ESC u n Hexadecimal 1B 75 n Dec.
Rev . 0.00 3-80 ST ARLIneModeCommandSpecications ESC x n [Name] Specify expanded Kanji characters (Double tall/double high & wide) [Code] ASCII ESC x n Hexadecimal 1B 78 n Decimal 2.
Rev . 0.00 3-81 ST ARLineModeCommandSpecications ESC w n [Name] Specify expanded Kanji characters (batch double tall/double high & wide) [Code] ASCII ESC w n Hexadecimal 1B 77 n Dec.
Rev . 0.00 3-82 ST ARLIneModeCommandSpecications 3-3-16) Others RS [Name] Ring buzzer [Code] ASCII RS Hexadecimal 1E Decimal 30 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : - Slip : - V alidation : - [Function] Issues a short buzzer sound from the printer.
Rev . 0.00 3-83 ST ARLineModeCommandSpecications ESC @ [Name] Command initialization [Code] ASCII ESC @ Hexadecimal 1B 40 Decimal 27 64 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : - Slip : - V alidation : - [Function] Initializes each command after printing data in the line buffer.
Rev . 0.00 3-84 ST ARLIneModeCommandSpecications ESC U n [Name] Select printing direction [Code] ASCII ESC U n Hexadecimal 1B 55 n Decimal 27 85 n [Dened Area] Thermal : - Slip : .
Rev . 0.00 3-85 ST ARLineModeCommandSpecications ESC GS # m N n1 n2 n3 n4 LF NUL [Name] Set memory switch [Code] ASCII ESC GS # m N n1 n2 n3 n4 LF NUL Hexadecimal 1B 1D 23 m N n1 n2 n3 .
Rev . 0.00 3-86 ST ARLIneModeCommandSpecications ESC # @ LF NUL [Name] Initialize all memory switches [Code] ASCII ESC # @ LF NUL Hexadecimal 1B 23 40 0A 00 Decimal 27 35 64 10 0 [De.
Rev . 0.00 3-87 ST ARLineModeCommandSpecications ESC # * LF NUL [Name] Inquire printer version [Code] ASCII ESC # * LF NUL Hexadecimal 1B 23 2A 0A 00 Decimal 27 35 42 10 0 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : - Slip : - V alidation : - [Function] Sends printer version.
Rev . 0.00 3-88 ST ARLIneModeCommandSpecications DC3 [Name] Printer deselect [Code] ASCII DC3 Hexadecimal 13 Decimal 19 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : Select printer Slip : Select printer V alidation : Select printer [Function] Deselects printer.
Rev . 0.00 3-89 ST ARLineModeCommandSpecications 3-4) Raster Graphics Command Details Raster graphics are command types and incidental specifications that enable high speed and high quality printing of graphics. The following shows the characteristics and specifications for raster graphics.
Rev . 0.00 3-90 ST ARLIneModeCommandSpecications ESC * r R [Name] Initialize raster mode [Code] ASCII ESC * r R Hexadecimal 1B 2A 72 52 Decimal 27 42 1 14 82 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : - Slip : - V alidation : - [Function] <Thermal> Initializes raster mode.
Rev . 0.00 3-91 ST ARLineModeCommandSpecications ESC * r A [Name] Enter raster mode [Code] ASCII ESC * r A Hexadecimal 1B 2A 72 41 Decimal 27 42 1 14 65 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : - Slip : - V alidation : - [Function] <Thermal> Enters raster mode.
Rev . 0.00 3-92 ST ARLIneModeCommandSpecications ESC * r B [Name] Quit raster mode [Code] ASCII ESC * r B Hexadecimal 1B 2A 72 42 Decimal 27 42 1 14 66 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : - Slip : - V alidation : - [Function] <Thermal> Quits raster mode.
Rev . 0.00 3-93 ST ARLineModeCommandSpecications ESC * r D n NUL [Name] Drawer drive [Code] ASCII ESC * r D n NUL Hexadecimal 1B 2A 72 44 n 00 Decimal 27 42 1 14 68 n 0 [Dened Are.
Rev . 0.00 3-94 ST ARLIneModeCommandSpecications ESC * r E n NUL [Name] Set raster EOT mode [Code] ASCII ESC * r E n NUL Hexadecimal 1B 2A 72 45 n 00 Decimal 27 42 1 14 69 n 0 [Dened.
Rev . 0.00 3-95 ST ARLineModeCommandSpecications ESC * r F n NUL [Name] Set raster FF mode [Code] ASCII ESC * r F n NUL Hexadecimal 1B 2A 72 46 n 00 Decimal 27 42 1 14 70 n 0 [Dened.
Rev . 0.00 3-96 ST ARLIneModeCommandSpecications ESC * r P n NUL [Name] Set raster page length [Code] ASCII ESC * r P n NUL Hexadecimal 1B 2A 72 50 n 00 Decimal 27 42 1 14 80 n 0 [De.
Rev . 0.00 3-97 ST ARLineModeCommandSpecications ESC * r m l n NUL [Name] Set raster left margin [Code] ASCII ESC * r m l n NUL Hexadecimal 1B 2A 72 6D 6C n 00 Decimal 27 42 1 14 109 10.
Rev . 0.00 3-98 ST ARLIneModeCommandSpecications ESC * r T n NUL [Name] Set raster top margin [Code] ASCII ESC * r T n NUL Hexadecimal 1B 2A 72 54 n 00 Decimal 27 42 1 14 84 n 0 [Den.
Rev . 0.00 3-99 ST ARLineModeCommandSpecications ESC * r K n NUL [Name] Set raster print color [Code] ASCII ESC * r K n NUL Hexadecimal 1B 2A 72 4B n 00 Decimal 27 42 1 14 75 n 0 [De.
Rev . 0.00 3-100 ST ARLIneModeCommandSpecications b n1 n2 data [Name] Send raster data (auto line feed) [Code] ASCII b n1 n2 d1 d2 ... dk Hexadecimal 62 n1 n2 d1 d2 .
Rev . 0.00 3-101 ST ARLineModeCommandSpecications k n1 n2 data [Name] T ransfer raster data [Code] ASCII k n1 n2 d1 d2 ... dk Hexadecimal 6B n1 n2 d1 d2 .
Rev . 0.00 3-102 ST ARLIneModeCommandSpecications ESC * r Y n NUL [Name] Moveverticaldirectionposition(Linefeedforspecieddots) [Code] ASCII ESC * r Y n NUL He.
Rev . 0.00 3-103 ST ARLineModeCommandSpecications ESC FF EOT [Name] Execute EOT mode [Code] ASCII ESC FF EOT Hexadecimal 1B 0C 04 Decimal 27 12 4 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : - Slip : - V alidation : - [Function] <Thermal> Executes EOT mode.
Rev . 0.00 3-104 ST ARLIneModeCommandSpecications ESC * r V m n NUL [Name] Execute external buzzer drive [Code] ASCII ESC * r V 1 n NUL Hexadecimal 1B 2A 72 56 31 n 0 Decimal 27 42 1 14.
Rev . 0.00 3-105 ST ARLineModeCommandSpecications 3-5) Black Mark Related Command Details The following commands control top of form functions using black mark paper. The following commands are effective only when black mark is set to be effective.
Rev . 0.00 3-106 ST ARLIneModeCommandSpecications FF [Name] Execute top of form [Code] ASCII FF Hexadecimal 0C Decimal 12 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : - Slip : - V alidation : - [Function] <Thermal> Executes top of form.
Rev . 0.00 3-107 ST ARLineModeCommandSpecications ESC C 0 n [Name] Set page length to n x 24 mm units [Code] ASCII ESC C 0 n Hexadecimal 1B 43 0 n Decimal 27 67 0 n [Dened Area] T.
Rev . 0.00 3-108 ST ARLIneModeCommandSpecications VT [Name] Feed paper to vertical tab position [Code] ASCII VT Hexadecimal 0B Decimal 1 1 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : - Slip : - V alidation : - [Function] <Thermal> When black mark is effective, this command is ignored.
Rev . 0.00 3-109 ST ARLineModeCommandSpecications ESC B NUL [Name] Clear vertical tab position [Code] ASCII ESC B NUL Hexadecimal 1B 42 00 Decimal 27 66 0 [Dened Area] Thermal : -.
Rev . 0.00 3-1 10 ST ARLIneModeCommandSpecications 3-6) 2-Color Printing Command Details The following commands control 2-color printing functions.
Rev . 0.00 3-1 1 1 ST ARLineModeCommandSpecications ESC RS C n [Name] Select/cancel 2-color print mode [Code] ASCII ESC RS C n Hexadecimal 1B 1E 43 n Decimal 27 30 67 n [Dened Are.
Rev . 0.00 3-1 12 ST ARLIneModeCommandSpecications ESC 4 [Name] (Thermal) Specify black/white inversion/(Slip) specify black/white inversion/specify red/black color [Code] ASCII ESC 4 H.
Rev . 0.00 3-1 13 ST ARLineModeCommandSpecications ESC RS d n [Name] Set print density [Code] ASCII ESC RS d n Hexadecimal 1B 1E 64 n Decimal 27 30 100 n [Dened Area] Thermal : 0 .
Rev . 0.00 3-1 14 ST ARLIneModeCommandSpecications ESC RS r n [Name] Set printing speed [Code] ASCII ESC RS r n Hexadecimal 1B 1E 72 n Decimal 27 30 1 14 n [Dened Area] Thermal : .
Rev . 0.00 3-1 15 ST ARLineModeCommandSpecications ESC FS q n [x1 1 x12 y1 1 y12 d1 … dk]1 … [xn1 xn2 yn1 yn2 d1 … dk] n [Name] Register logo [Code] ASCII ESC FS q n [x1 1 x12 y1 1 y12 d1 .. dk]1 .. [xn1 xn2 yn1 yn2 d1 .. dk]n Hexadecimal 1B 1C 71 n [x1 1 x12 y1 1 y12 d1 .
Rev . 0.00 3-1 16 ST ARLIneModeCommandSpecications (Note) The registered data is shared by all stations and modes. If this command is used frequently , there is the possibility of damaging the non-volatile memory . Write to the non-volatile memory less than 10 times in one day .
Rev . 0.00 3-1 17 ST ARLineModeCommandSpecications ESC FS p n m [Name] Print logo [Code] ASCII ESC FS p n m Hexadecimal 1B 1C 70 n m Decimal 27 28 1 12 n m [Dened Area] Thermal : .
Rev . 0.00 3-1 18 ST ARLIneModeCommandSpecications 3-7) Mark Command Details This command is specialized to mark sheet printing for lotteries.
Rev . 0.00 3-1 19 ST ARLineModeCommandSpecications ESC GS * 0 n m1 m2 m3 … mk [Name] Print Mark [Code] ASCII ESC GS * 0 n m1 m2 m3 ...
Rev . 0.00 3-120 ST ARLIneModeCommandSpecications ESC GS * 1 h v [Name] Specify mark height and line feed [Code] ASCII ESC GS * 1 h v Hexadecimal 1B 1D 2A 31 h v Decimal 27 29 42 49 h v.
Rev . 0.00 3-121 ST ARLineModeCommandSpecications ESC GS * W [Name] Register mark format to non-volatile memory [Code] ASCII ESC GS * W Hexadecimal 1B 1D 2A 57 Decimal 27 29 42 87 [De.
Rev . 0.00 3-122 ST ARLIneModeCommandSpecications 3-8) AUTO LOGO Function Command Details If the portion that was changed was only the product name in a system, like the one below, already operating, this command functions to print a logo like the one below by only changing the product name.
Rev . 0.00 3-123 ST ARLineModeCommandSpecications 2) Simple Auto Logo Function Preset the simple Auto Logo function, and execute the following operations with the printing cut command under the existing system as a trigger. (1) Simple Auto Logo function starts up using the existing system cut command as a trigger.
Rev . 0.00 3-124 ST ARLIneModeCommandSpecications Command Transmission Example 1) Set the Auto Logo function in advance and register to the non-volatile memory.
Rev . 0.00 3-125 ST ARLineModeCommandSpecications ESC GS / W [Name] Register Auto Logo setting to non-volatile memory [Code] ASCII ESC GS / W Hexadecimal 1b 1d 2f 57 Decimal 27 29 47 87.
Rev . 0.00 3-126 ST ARLIneModeCommandSpecications ESC GS / 1 n [Name] Set ON/OFF for Auto Logo function [Code] ASCII ESC GS / 1 n Hexadecimal 1b 1d 2f 31 n Decimal 27 29 47 49 n [Den.
Rev . 0.00 3-127 ST ARLineModeCommandSpecications ESC GS / 2 n [Name] Set command characters [Code] ASCII ESC GS / 3 n Hexadecimal 1b 1d 2f 32 n Decimal 27 29 47 50 n [Dened Area].
Rev . 0.00 3-128 ST ARLIneModeCommandSpecications ESC GS / 3 nL nH d1 d2 … dk [Name] Set user macro 1 [Code] ASCII ESC GS / 3 nL nH d1 d2 .
Rev . 0.00 3-129 ST ARLineModeCommandSpecications ESC GS / 4 nL nH d1 d2 … dk [Name] Set user macro 2 [Code] ASCII ESC GS / 4 nL nH d1 d2 .
Rev . 0.00 3-130 ST ARLIneModeCommandSpecications ESC GS / 5 n [Name] Set command character switching method [Code] ASCII ESC GS / 5 n Hexadecimal 1b 1d 2f 35 n Decimal 27 29 47 53 n [D.
Rev . 0.00 3-131 ST ARLineModeCommandSpecications ESC GS / 6 n [Name] Partial cut setting just prior to Auto Logo printing [Code] ASCII ESC GS / 6 n Hexadecimal 1b 1d 2f 36 n Decimal 27.
Rev . 0.00 3-132 ST ARLIneModeCommandSpecications This command selects execution of a partial cut just prior to Auto Logo Logo 2, and Logo 3, when executing Logos 2 and 3 as an Auto Logo print, as shown above.
Rev . 0.00 3-133 ST ARLineModeCommandSpecications 3-9) 2-dimensional Bar Codes PDF417 Command Details This command prints 2-dimensional bar codes PDF417. Commands for 2-dimensional bar codes PDF417 are separated into the following four functions.
Rev . 0.00 3-134 ST ARLIneModeCommandSpecications These are individual settings, so the following errors may occur even if there are no problems. In such cases, the bar codewillnotbegenerated,andthe(3)printcommand((<ESC><GS>“x”“P”)willbeignored.
Rev . 0.00 3-135 ST ARLineModeCommandSpecications ESC GS x S 0 n p1 p2 [Name] PDF417 bar code size setting [Code] ASCII ESC GS x S 0 n p1 p2 Hexadecimal 1B 1D 78 53 30 n p1 p2 Decimal 2.
Rev . 0.00 3-136 ST ARLIneModeCommandSpecications ESC GS x S 2 n [Name] Set PDF417 module X direction size [Code] ASCII ESC GS x S 2 n Hexadecimal 1B 1D 78 53 32 n Decimal 27 29 120 83 .
Rev . 0.00 3-137 ST ARLineModeCommandSpecications ESC GS x D nL nH d1 d2 … dk [Name] PDF417 bar code data setting [Code] ASCII ESC GS x D nL nH d1 d2 … dk Hexadecimal 1B 1D 78 44 nL.
Rev . 0.00 3-138 ST ARLIneModeCommandSpecications ESC GS x I [Name] Get PDF417 bar code expansion information [Code] ASCII ESC GS x I Hexadecimal 1B 1D 78 49 Decimal 27 29 120 73 [De.
Rev . 0.00 3-139 ST ARLineModeCommandSpecications 3-10) Print Starting T rigger Control Command Details This command is for models equipped with an expansion control function that page-controls the command in line units by page-controlling the image buffer.
Rev . 0.00 3-140 ST ARLIneModeCommandSpecications 3-1 1) 2-dimensional Bar Codes QR Code Command Details * QR code is a registered trademark of DENSO WAVE Incorporated. This command prints 2-dimensional bar codes of QR code. Commands for 2-dimensional bar codes QR code are separated into the following four functions.
Rev . 0.00 3-141 ST ARLineModeCommandSpecications 2) Bar code data setting command This command set the bar code print data. There are four types of data types that can be set by the QR code. They are: numbers, alpha-numeric characters, binary and Kanji characters.
Rev . 0.00 3-142 ST ARLIneModeCommandSpecications Below is a command transmission example. (1) Bar code type setting <ESC><GS>“y”“S”“0”1 :Settomodel1. <ESC><GS>“y”“S”“1”0 :SeterrorcorrectionleveltoL.
Rev . 0.00 3-143 ST ARLineModeCommandSpecications ESC GS y S 0 n [Name] Set QR code model [Code] ASCII ESC GS y S 0 n Hexadecimal 1B 1D 79 53 30 n Decimal 27 29 121 83 48 n [Dened.
Rev . 0.00 3-144 ST ARLIneModeCommandSpecications ESC GS y S 2 n [Name] Set QR code cell size [Code] ASCII ESC GS y S 2 n Hexadecimal 1B 1D 79 53 32 n Decimal 27 29 121 83 50 n [Dene.
Rev . 0.00 3-145 ST ARLineModeCommandSpecications ESC GS y D 1 m nL nH d1 d2 … dk [Name] QR code data setting (automatic setting) [Code] ASCII ESC GS y D 1 m nL nH d1 d2 … dk Hexade.
Rev . 0.00 3-146 ST ARLIneModeCommandSpecications ESC GS y D 2 a m1 n1L n1H d1 1 d12 … d1k m2 n2L n2H d21 d22 … d2k ml … dlk [Name] QR code data setting (manual setting) [Code] AS.
Rev . 0.00 3-147 ST ARLineModeCommandSpecications ESC GS y P [Name] Print QR code [Code] ASCII ESC GS y P Hexadecimal 1B 1D 79 50 Decimal 27 29 121 80 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : - Slip : - V alidation : - [Function] <Thermal> This command prints the bar code data.
Rev . 0.00 3-148 ST ARLIneModeCommandSpecications 3-12) Page Function Command Details ESC GS h 0 k m n [Name] 180˚inversionfunction [Code] ASCII ESC GS h 0 k m n Hexadecima.
Rev . 0.00 3-149 ST ARLineModeCommandSpecications ESC GS h 1 k m n [Name] Water mark function [Code] ASCII ESC GS h 1 k m n Hexadecimal 1B 1D 68 31 k m n Decimal 27 29 104 49 k m n [De.
Rev . 0.00 3-150 ST ARLIneModeCommandSpecications Example of Use 1) Register logo to use as the water mark as logo #1. 2) Water mark function is valid.
Rev . 0.00 3-151 ST ARLineModeCommandSpecications 3-13) Slip/V alidation Function Command Details ESC SI n [Name] Set slip sensor [Code] ASCII ESC SI n Hexadecimal 1B 0F n Decimal 27 15.
Rev . 0.00 3-152 ST ARLIneModeCommandSpecications ESC VT m n [Name] Sets slip paper discharge direction and discharge length [Code] ASCII ESC VT m n Hexadecimal 1B 0B m n Decimal 27 1 1.
Rev . 0.00 3-153 ST ARLineModeCommandSpecications 3-14) Page Mode Command Details FF [Name] Batch printing of page data (valid only in page mode) [Code] ASCII FF Hexadecimal 0C Decimal .
Rev . 0.00 3-154 ST ARLIneModeCommandSpecications ESC n [Name] Selects page mode [Code] ASCII ESC n Hexadecimal 1B 6E Decimal 27 1 10 [Dened Area] Thermal : - Slip : - V alidation.
Rev . 0.00 3-155 ST ARLineModeCommandSpecications ESC ! [Name] Select line mode (Default) [Code] ASCII ESC ! Hexadecimal 1B 21 Decimal 27 33 [Dened Area] Thermal : - Slip : - V al.
Rev . 0.00 3-156 ST ARLIneModeCommandSpecications ESC * xL xH yL yH dxL dxH dyL dyH [Name] Set page mode print region [Code] ASCII ESC * xL xH yL yH dxL dxH dyL dyH Hexadecimal 1B 2A xL.
Rev . 0.00 3-157 ST ARLineModeCommandSpecications ESC T n [Name] Set page mode rotation direction [Code] ASCII ESC T n Hexadecimal 1B 54 n Decimal 27 84 n [Dened Area] Thermal : -.
Rev . 0.00 3-158 ST ARLIneModeCommandSpecications 3-15) Station Selection Command Details ESC + A n [Name] Select printer station [Code] ASCII ESC + A n Hexadecimal 1B 2B 41 n Decimal 2.
Rev . 0.00 3-159 ST ARLineModeCommandSpecications 3-16) Presenter Related Command Details The following commands control the presenter functions.
Rev . 0.00 3-160 ST ARLIneModeCommandSpecications ESC SYN 4 n [Name] Initialize presenter paper counter [Code] ASCII ESC SYN 4 n Hexadecimal 1B 16 4 n Decimal 27 22 52 n [Dened Ar.
Rev . 0.00 3-161 ST ARLineModeCommandSpecications 3-17) MICR Related Command Details The following commands control MICR functions. The following commands are effective only on models equipped with MICR.
Rev . 0.00 3-162 ST ARLIneModeCommandSpecications E13B Support Table T ype Numbers SYMBOL1 SYMBOL2 SYMBOL3 SYMBOL4 ASCII 0 to 9 T A O D Hex 30 to 39 54 41 4F 44 Decimal 48 to 57 84 65 7.
Rev . 0.00 4-1 ST ARLIneModeCommandSpecications 4. CHARACTER CODE T ABLES Character Code Specifications References.
Rev . 0.00 5-1 ST ARLIneModeCommandSpecications 5. APPENDIX 5-1) Appendix 1: Bar Code Specication Details <Thermal> Refer to the dedicated manuals for characteristics and methods of use for each bar code symbol. This section describes precautions and methods for setting when printing with the printer.
Rev . 0.00 5-2 ST ARLIneModeCommandSpecications 5-1-3) JAN/EAN/UPC Used numbers, not only the bar code symbols, are controlled using JAN, EAN and UPC as shared common commer- cial codes. Mainly, they are used for supermarkets such as shops and grocery stores.
Rev . 0.00 5-3 ST ARLIneModeCommandSpecications 5-1-4) Code 128 These are bar code symbols that can print ASCII 128 characters. For that reason, use thereof is increasing. 1. Each module and module width Items Mode 1 Mode 2 Mode 3 Module Width 2 Dots 3 Dots 4 Dots Length of 1 Character (*) 2.
Rev . 0.00 5-4 ST ARLIneModeCommandSpecications 3. 2-Character set code table <ControlCodes> <ControlCodes> <ControlCodes> Code Format Code Format NU.
Rev . 0.00 5-5 ST ARLIneModeCommandSpecications 5-1-5) Code 93 1. Each mode and module width Items Mode 1 Mode 2 Mode 3 Module Width 2 Dots 3 Dots 4 Dots Length of 1 Character (*) 2.25mm 3.375mm 4.5mm (*) Start and stob bars not included.
Rev . 0.00 5-6 ST ARLIneModeCommandSpecications 5-2) Appendix 2 – Status Specications <Shared> This function is valid only when using an interface capable of bi-directional data communications.
Rev . 0.00 5-7 ST ARLIneModeCommandSpecications 5-2-3) Automatic Status Automatic status is a group of states that are automatically returned from the printer to the host when the printer’s sta- tus has changed.
Rev . 0.00 5-8 ST ARLIneModeCommandSpecications (2) Header -2 Header -2 is the 1 byte length information transmitted from the second byte of the automatic status.
Rev . 0.00 5-9 ST ARLIneModeCommandSpecications (3) Printer Status Printer status is the status of the printer sent from the 3 rd byte of the automatic status. For the printer status, (the number of bytes added in Header -1 minus two) is returned.
Rev . 0.00 5-10 ST ARLIneModeCommandSpecications <Printerstatus4SensorInformation(SixthByte)> Bit Contents Status By model “0” “1” HSP7000 7 Fix.
Rev . 0.00 5-1 1 ST ARLIneModeCommandSpecications <Printerstatus6ETBCounter(EighthByte)> Bit Contents Status By model “0” “1” HSP7000 7 Fixed at.
Rev . 0.00 5-12 ST ARLIneModeCommandSpecications 5-2-4) Printer Status T ransmission Specication when using Ethernet and W ireless LAN Interfaces The following explains the printer status transmission specification when using Ethernet and wireless LAN interfaces.
Rev . 0.00 5-13 ST ARLIneModeCommandSpecications (5) Printer status (variable) Status sent by printer The content of the status differs according to the cause. Refer to Commands That are Factors, and Automatic Status for details on the content of the status.
Rev . 0.00 5-14 ST ARLIneModeCommandSpecications 5-3) Appendix 3 – Blank Code Page Conguration <Thermal> Blank code pages are character code tables that are empty from character code 80H to FFH. They can be specified using the command below.
Rev . 0.00 5-15 ST ARLIneModeCommandSpecications 2. Example configuration of Font B data. (9 x 24 font) Fig. A-2 9 x 24 Font MSB LSB MSB LSB d1 d2 0 0 0 0 0 0 0 d3 • • • d4 0 0 0 .
Rev . 0.00 5-16 ST ARLIneModeCommandSpecications 5-4) Appendix 4 : QR Code Maximum Input Character Count in Each V erson <Thermal> 1) Model 1 Versions and Maximum Input Character .
Rev . 0.00 5-17 ST ARLIneModeCommandSpecications 2) Model 2 Versions and Maximum Input Character Count V ersion Number of Cells on One Side Error Correction Level Numbers English Langua.
Rev . 0.00 5-18 ST ARLIneModeCommandSpecications V ersion Number of Cells on One Side Error Correction Level Numbers English Language Characters Binary Kanji Character 16 81 L 1408 854 .
Rev . 0.00 5-19 ST ARLIneModeCommandSpecications V ersion Number of Cells on One Side Error Correction Level Numbers English Language Characters Binary Kanji Character 31 141 L 4417 267.
Rev . 0.00 6-1 ST ARLIneModeCommandSpecications 6. SPECIAL APPENDIX COMMAND LIST BY MODEL ○:ValidCommands •:ValidCommands(IndependentFunctionsonT.
Rev . 0.00 6-2 ST ARLIneModeCommandSpecications Class Commands Class Model Name HSP7000 Set Executed Thermal Slip Bit Image ESC K ○ ○ ○ Graphics ESC L ○ ○ ○ ESC k ○ ○ ×.
Rev . 0.00 6-3 ST ARLIneModeCommandSpecications • Raster related commands Class Commands Class Model Name HSP7000 Set Executed Thermal Slip Raster ESC * r R ○ ○ × ESC * r A ○ .
Rev . 0.00 6-4 ST ARLIneModeCommandSpecications • Auto Logo Commands Class Commands Class Model Name HSP7000 Set Executed Thermal Slip Auto Logo ESC GS / W ○ ○ ○ ESC GS / C ○ .
Rev . 0.00 6-5 ST ARLIneModeCommandSpecications • QR Code Commands Class Commands Class Model Name HSP7000 Set Executed Thermal Slip QR Codes ESC GS y S 0 ○ ○ ‡ ESC GS y S 1 ○.
Rev . 0.00 7-1 ST ARLIneModeCommandSpecications 7. SPECIAL APPENDIX COMMAND FUNCTION LIST 7-1) HSP7000 7-1-1) Setting Command List Execution Station Thermal Slip V alidation T ype Comma.
Rev . 0.00 7-2 ST ARLIneModeCommandSpecications Execution Station Thermal Slip V alidation T ype Command Thermal, Slip, V alidation Line Other Precautions Line/Page Other Precautions Li.
Rev . 0.00 7-3 ST ARLIneModeCommandSpecications Execution Station Thermal Slip V alidation T ype Command Thermal, Slip, V alidation Line Other Precau- tions Line/Page Other Precautions .
Rev . 0.00 7-4 ST ARLIneModeCommandSpecications Execution Station Thermal Slip V alidation T ype Command Thermal, Slip, Validation Line Other Precautions Line/Page Other Precautions Lin.
Rev . 0.00 7-5 ST ARLIneModeCommandSpecications Execution Station Thermal Slip V alidation T ype Command Thermal, Slip, V alidation Line Other Precautions Line/Page Other Precautions Li.
Rev . 0.00 7-6 ST ARLIneModeCommandSpecications 7-1-2) Execution Command List Execution Station Thermal Slip V alidation T ype Command Thermal, Slip, V alidation Line Other Precautions .
Rev . 0.00 7-7 ST ARLIneModeCommandSpecications Execution Station Thermal Slip V alidation T ype Command Thermal, Slip, V alidation Line Other Precautions Line/Page Other Precautions Li.
Rev . 0.00 7-8 ST ARLIneModeCommandSpecications Execution Station Thermal Slip V alidation T ype Command Thermal, Slip, V alida- tion Line Other Precautions Line/Page Other Precautions .
Rev . 0.00 7-9 ST ARLIneModeCommandSpecications Execution Station Thermal Slip V alidation T ype Command Thermal, Slip, V alidation Line Other Precautions Line/Page Other Precautions Li.
Rev . 0.00 2008.09.29 Printed in Japan, 8087710 5 ELECTRONIC PRODUCTS DIVISION ST AR MICRONICS CO., L TD. 53 6 Nanatsushinya, Shimizu-ku, Shizuoka, 424-0066 Japan T el: (int+81)-54-347-01 12, Fax: (int+81)-54-347-0709 Please access the following URL ht t p : / / w w w .
デバイスStar Micronics Line Thermal/Dot Printerの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Star Micronics Line Thermal/Dot Printerをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはStar Micronics Line Thermal/Dot Printerの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Star Micronics Line Thermal/Dot Printerの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Star Micronics Line Thermal/Dot Printerで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Star Micronics Line Thermal/Dot Printerを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はStar Micronics Line Thermal/Dot Printerの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Star Micronics Line Thermal/Dot Printerに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちStar Micronics Line Thermal/Dot Printerデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
