BarbieメーカーBUTTERFLY TRIKE 72639の使用説明書/サービス説明書
ページ先へ移動 of 8
Butterfly Trike Model Number: 72639 Please keep these instructions for future reference. Adult assembly is required. Tools needed for assembly: Hammer, Phillips Screwdriver, Scrap Block of Wood.
Fisher-Price, Inc., a subsidiary of Mattel, Inc. East Aurora, New York 14052, U.S.A. ©1999 Mattel, Inc. All Rights Reserved. Printed in Mexico ® and ™ designate U.S. trademarks of Mattel, Inc. 72639A-0921 BARBIE is a U. S. trademark of Mattel, Inc.
• Place a cap nut on a scrap block of wood. • Place one end of the straight axle into the cap nut. • Tap the end of the straight axle with a hammer. Make sure the cap nut is securely attached to the straight axle. • Slide a hubcap (peg side up) onto the straight axle.
• Fit two pedal hubs onto the pedal axle metal tabs. Make sure the metal tabs fit into the slot in each pedal axle cover. Pedal Hub Pedal Hub Pedal Axle Metal Tab Metal Tab Slot • While holding the pedal hubs on the pedal axle, insert the pedal axle into the hole in the center of the front wheel.
5 Pedal Hubs Pedal Hub Pedal Hub Pedal Axle • Turn the front wheel assembly over. • Insert a pedal hub onto the top of the pedal axle and into the hole in the center of the front wheel. • Insert the remaining pedal hub below the pedal axle and into the hole in the center of the front wheel.
6 • Turn the frame upright. • Insert the fork post up through the hole in the neck of the frame. Make sure the fork is positioned so that the fork covers face the rear wheels. • Place the handlebar over the fork post and push it down onto the frame.
7 Proper label application will help to keep the labels looking their best! • Wash your hands before applying the labels. • Make sure the areas where the labels will be applied are clean and dry. Wipe your vehicle with a clean, soft, dry cloth to remove any dust or oils.
8 • Check plastic parts regularly and if broken or cracked, dispose of them properly. • Check all fasteners regularly to be sure they are tight. If the fasteners are not tight, tighten them as necessary. • To clean the trike, use a mild soap and water solution and a clean cloth.
デバイスBarbie BUTTERFLY TRIKE 72639の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Barbie BUTTERFLY TRIKE 72639をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはBarbie BUTTERFLY TRIKE 72639の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Barbie BUTTERFLY TRIKE 72639の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Barbie BUTTERFLY TRIKE 72639で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Barbie BUTTERFLY TRIKE 72639を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はBarbie BUTTERFLY TRIKE 72639の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Barbie BUTTERFLY TRIKE 72639に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちBarbie BUTTERFLY TRIKE 72639デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。