BarcoメーカーG500の使用説明書/サービス説明書
ページ先へ移動 of 195
iQ P RO G 500 Owner’s Manual R9003081 R5976491/09 01/02/2007.
Product revision Software version: projector firmware V3.10 Software vers ion: Server version 1.20 Software version: Client version 1.20 Barco nv Presentations Noordl aan 5, 8520 Kuurne Phone: +32 56.36.82.11 Fax: +32 56.35.86.51 E-mail: presentations.
Federal Communications Commis sion (FCC Statement) This equipment has been tested and fou nd to comply with the limits for a class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equ ipment is operated in a commercial environment.
• Security Update s : Content providers are using the digital rights managem ent technology (“Microsoft DRM”) contained in this SOFT - WARE to protect the integrity of their content (“Secure Content”) so that th eir intellectual property , including copyright, in such content is not misappropriated.
T rademarks Brand and product names mentioned in this manual may be trademarks, r egistered trademarks or copyri ghts of their respective holders. All brand and product names mentioned in this manual serve as comments or examples and are not to be understood as advertising for the products or their manufactures.
.
Table of con tents T ABLE OF CONTENTS 1 . P a c k a g i n g a n d D i m e n s i o n s ...................................................................................... 5 1 . 1 B o x c o n t e n t ................... .................. ...........
Table of con tents 7 . 1 . 2 B r i g h t n e s s..................... ................... ................... ............... .................. ................... ...... 5 6 7 . 1 . 3 C o l o r ........................... ................... .......
Table of con tents 1 4 . 4 G e t t i n g s t a r t e d ....................... ................... ................... .................. ................... ........... ......... 1 2 5 14.4.1 Connections ........ ................... .................
Table of con tents 4 R5976491 IQ PRO G500 01/02/2007.
1. Packaging and Dimension s 1. P ACKAGING AND DIMENSIONS Overview • Box content • Projector Packaging • Lens Packaging • Dimensions 1.1 Box content CEE7 European power plug to connect the power cord to the wall outlet. ANSI 73.1 1 American power plug to connect the power cord to the wall outlet.
1. Packagin g and Dimensions PULL TO OPE Image 1-1 R824562 R824561 R824518 (+ cable basket R72440 8 R825784 Projector Image 1 -2 Save the original shipping carton and packi ng material, they will be necessary if you ever have to ship your projector . For maximum protection , repack your projector as it was originally packed at the factory .
1. Packaging and Dimension s 7 8 3 0 5 2 8 1 1 5 2 487 45 380 Cold air in Length with different lenses, see table 2 0 6 9 4 1 5 Hot air out 565 1 9 5 Image 1-3 R5976491 IQ PRO G500 01/02/2007 7.
1. Packagin g and Dimensions Lens length of pr ojector combinable with cable basket Remarks SVD(2-2.5:1) 545mm YES Length with cable basket = 565mm QVD(1.
2. Installation G uidelines 2. INST ALLA TION GUIDELINES Overview • Safety warnings • Installation guidelines • Projector configurations • Lenses • Batteries 2.1 Safety warnings W ARNING : Before installing the projector , read first the safety instructions in the safety manual (R5975258) delivered with the projec tor .
2. Insta llation Guidelines has been specifically designed for cleaning optical parts, never use i ndustrial strength cleaners on a projectors optics as these will degrade optical coatings and damage sensitive optoelectronics .
2. Installation G uidelines 1 2 3 4 Image 2-1 R5976491 IQ PRO G500 01/02/2007 11.
2. Insta llation Guidelines Positioning the p rojector P PD x F a b c S S B SH SW SH SW F CD=SH/2+B-A A front plate Image 2-2 ON-Axis i nstallation a side vie w b top view c back vi ew x optical axi s.
2. Installation G uidelines P PD F a b c S S B SH SW SH SW F CD=B-A A front plate Image 2-3 100% OFF Axis insta llation a side vie w b top view c back vi ew x optical axi s projec tion lens pp r o j e.
2. Insta llation Guidelines C AUTION : Never place the projecto r on either side ! Floor Floor Image 2-4 2.4 Lenses Overview • Lenses • Lens formulas • Lens installation • Removing the lens • Cleaning the lens 2.
2. Installation G uidelines 2.4.2 Lens formulas Formulas Metric Formulas (meter) Inch formulas (inch) QVD(0.85:1) PD = -0.034 + 0.801 x SW + 0.0086 /SW PD = -1.34 + 0.801 x SW + 13.35 /SW QVD(1.3-1.8:1) PDmin = 0.019 + 1.216xSW + 0.028/SW PDmax = -0.001 + 1.
2. Insta llation Guidelines Image 2-5 Image 2-6 C AUTION : Never transport the p rojector (or the whole unit) w ith the lens mounted on it ! Always rem ove the lens and transport it s eparately . 2.4.4 Removing the lens How to remove the lens ? 1. Sli de the lens door to the left.
2. Installation G uidelines 2.4.5 Cleaning the len s T o m inimize the possibility of damage t o optical coatings, or scratches to len s surfaces, we have developed recommendation s for cleaning. FIRST , we recommend you try to remove any ma terial from the lens by blowing it off with clean, dry deionized air.
2. Insta llation Guidelines 18 R5976491 IQ PRO G500 01/02/2007.
3. Connecti ons 3. CONNECTIONS Overview • Power connection • Input source connection 3.1 Power connection AC power (mains) cord connection Use the supplied power cord to connect your projector to the wall outlet. Plug the female power connector into the male connector at t he front of the projector .
3. Connecti ons 1. Layer 1: analog layer containing analog data and video inputs 2. Layer 2: a hybrid layer containing 2 digital and 1 analog input 3. Layer 3 : network layer 3.
3. Connecti ons A cable cover i s supplied with the projector and can be fitted on the front of th e projector Image 3-3 Cable basket : the white arrow shows the cables leaving the projector A Front view B Back view 3.2.3 5-Cable input Input specificat ions The 5-cable input section is made of 5 BNC input terminals.
3. Connecti ons Beside the sta ndard RGB, component and sy nc signals, the extended mod e of the 5 Cable input makes pro- cessing of ad ditional signals possible.
3. Connecti ons 3.2.5 S-Vi deo input S-Video c onnection An S-Video signal is available on the Mini-Din connector of a camera, VCR or DVD player . Input specificat ion Image 3-6 Which signal can be connected ? Standard S-Video (S-VHS) with separ ate Y(luma) and C (chroma) signals.
3. Connecti ons Image 3-7 a DVI-I type connector , analog link (4 pins at the right side of the connector) not supported How to select the DVI Input ? 1. Press 5 on the RCU Note: Another way for selecting this input is via the Menu. 3.2.7 Computer input Input specificat ion TTL sync input : U min =2 .
3. Connecti ons 3.2.8.1 RS232 IN connection What can be c onnected to t he RS232 IN connection ? The RS 232 IN connections allows the projector to communicate with a Computer e.
3. Connecti ons Inputs R G B H V VID EO RGBHV R G B H V - RG S B R G S B - - - RGBS R G B S - - Component PR Y PB - - - S-Video - - - - C Y S-Video C - Y - - - Composite VIDEO ---- - Composite - VIDEO.
3. Connecti ons How to set up the S-Video extended con figuration ? 1. Con nect the vi deo sources to the desired connector (image 3-13) Note: An adapter cable is required Image 3- 13 Connecting 2 composi te Video sign als on the S-Vi deo connector Multiple video sig nals can not be visualized simultaneously sin ce there is only one decoder .
3. Connecti ons 28 R5976491 IQ PRO G500 01/02/2007.
4. Getting started 4. GETTING ST ARTED Overview • RCU & Local keypad • T erminology overview • Switching on • Lamp runtime • Lamp error • Quick set up adjustments • Projector address • Controlling the projector • Digital Zoom • Menu structure • Using the menu • Using the Dialogboxes 4.
4. Getting started Image 4-1 Local keypad layout Remote control funct ions. This remote control includes a ba ttery powered infrared (IR) trans mitter that allows the user to control the projector remo tely . This remote control is used for source selection, control, adaptation and set up .
4. Getting started 4.2 T erminology overview Overview The following table gives an overview of the keys. Image 4-2 1 Function keys user programmable keys with functions for direct access. 2 MENU Menu key , to enter or exit the T oolbar menu. 3 Address key (recessed key), to enter the address of the projector (between 0 and 9).
4. Getting started 10 Lens control use these buttons to obtain the de sired ZOOM, SHIFT , FOCUS. 11 VOL use this button to obtain the desired sound level (audio = optional) 12 Picture controls use these buttons to obtain the desired picture analog level.
4. Getting started If the Security mod e is enabled, a tex tbox will be displayed for PIN code e ntry , see Security s e t t i n gi nt h e Installation menu 4.4 Lamp runtime x T o generalize for the dif ferent projector types, x refers here to the maximum run time of the lamp.
4. Getting started The total lifetime of the lamp for a safe operation is “x” hours max, do not use it longer . Always replace with a same type of lamp.
4. Getting started Image 4- 10 The message will dissapear after 2 minutes, it can also be escaped. The projector will switch to single lamp mode and displays an ico n (right top c orner of the screen) representing a crossed out lamp, that way informing the user of an earlier lamp error .
4. Getting started Image 4-1 1 When using the remote co ntrol, make sure you are within the effective operating distan ce. The operat ing distan ce may be up to 15 m (50ft) .
4. Getting started AB C D Image 4- 13 Stereo jack pin configu ration A tip: Left c hannel B ring: right chann el C screen: common (GND) D external switch The Remote connection uses a standard t wo wire cable terminated on each en d with a 3.5 mm male (mono/stereo) phone jack.
4. Getting started Some projectors may operate in d omestic environments where other equipments ma y listen to the common address “0” , therefore the commo n address can also be set to “1”. 4.7.2 D isplaying and Programming address es into the RCU Displaying the P rojector Address o n the Screen.
4. Getting started Sharpness Use the + button for a sharper picture. Use the - button for a softer picture. Phase Use the + or - button to adjust the phase. Gamma Use the + button for a higher gamma Use the - button for a lower gamma Freeze Press Freez e to freeze the displayed image.
4. Getting started Three suspension points indicate that the menuitem hides a dialogbox or a textbox. Image 4- 15 The menus inserted in this manual are of the advan ced type: all the item s are visible The menus seen by a standard user on the screen will hence no t correspond with the menus in the manual i.
4. Getting started Image 4- 16 Entering numeric values using the arr ow keys on the remote control 1. Press ENTER t o activate the input field. 2. Press ← or → to select the digit to be changed (image 4-17) 3. Press ↓ or ↑ to increase or decrease the value Image 4- 17 Entering numeric val ues using the arrow keys on t he local keypad 1.
4. Getting started 42 R5976491 IQ PRO G500 01/02/2007.
5. Source Selection 5. SOURCE SELECTION Overview • Source selection • Composite Video •S - V i d e o • The Video Selector 5.1 Source selection Selecting a source The Source selection menu allows to se lect one of the dif ferent sources.
5. Source Selection Image 5-2 The Barco logo o n the menu indicates the presence of a sig nal, the digit indicates the shortcut key on the RCU. The 3 first sources (Data on BNC’s, Component Video & RG(s)B) refer to the 5-cable in put, the position of the indication “1” will always sho w which BNC configuration is selected.
5. Source Selection Image 5-3 Adjustments o n a Composite video s ignal The projectors allows different adjustments on a composite video signal. Depending on the type of signal (NTSC /P AL) the termi-.
5. Source Selection Image 5-4 The S-Video sources can also be selected using the video s elector or via the dedicated key 4 on the RCU. Key 4 allows to browse thro ugh the active S-Video inputs when the extended mode is checke d in Video Selector . 5.
5. Source Selection Image 5-6 B C D E A A B C D E Image 5 -7 If the Aud io/V ideo opt ion is in stalle d the V ideo Sel ector is updated with t he addit ional V ideo & S-Video input Image 5-8 How to select an in put on the Video Sel ector ? 1. Use ← or → to brow se through the dif ferent inputs 2.
5. Source Selection Image 5-9 48 R5976491 IQ PRO G500 01/02/2007.
6. General Menu 6. GENERAL MENU Overview • Pause • Freeze • Standby Timer • Audio (Optional) • Identification 6.1 Pause Interrupting the imag e projection With the Pause function, the image projection can be stoppe d, the p rojector remains with full power for immediate restart.
6. General Menu Image 6-2 T h ei m a g ec a na l s ob ef r o z e nu s i n gt h eF R E E Z Ek e yo nt h eR C U 6.3 Standby Timer Purpose of the S tandby Timer If there is no signal, and the standby timer is enabled, a dialogbox is displayed and the projector will shut down a fter a determined time.
6. General Menu Image 6-4 6.4 Audio (Optional) Overview • Audio Setup • Audio Settings 6.4.1 Audio Setup What can be done ? Layer 3 allows the input of 4 audio signals, each of them can be linked to the corresponding (video or data) source signal.
6. General Menu Image 6-6 How to mute an Audio cha nnel ? 1. use the arro w keys t o select the desired mute box 2. Press ENTER How to link an audio i nput to a source ? 1. use the arrows to sel ect th e desired scrol l box 2. Press EN TER to open the scroll box 3.
6. General Menu Image 6-8 6.5 Identification The projector’s id entification sc reen The identification screen displays the projector ’s main characteristics How to display th e identifi cation screen ? 1. Press MENU to a ctivate the T oo l bar 2.
6. General Menu Image 6-10 54 R5976491 IQ PRO G500 01/02/2007.
7. Image M enu 7. IMAGE MENU Overview • Settings • Aspect ratio • Show native resolution • Keystone • Color temperature • Filmmode detection •B l a n k i n g • Input balance • AGC on Video • Manual Gain Control 7.
7. Image Menu 7.1.1 Contras t Contrast adjust ment Adjust the contrast to “brighten” the white parts of the image. It is recommended to adjust the brigh tness before adjusting the cont rast. How to change the contrast 1. Press MENU to activate the T oolbar 2.
7. Image M enu How to change t he Color ? 1. Press MENU to activate the T oolbar 2. Press → to select the Image item 3. Press ↓ to Pull dow n the Image menu 4. Use ↑ or ↓ to select settings 5. Press → to pu ll down the menu 6. Use ↓ or ↑ to select Color 7.
7. Image Menu 5. Press → to pu ll down the menu 6. Use ↓ or ↑ to select Gamma 7. Press ENTER On the screen appears now a sliderbox 8. Use ← or → , the n umeric keys on the remote, or the keypad to change the G amma 7.
7. Image M enu 4:3 16:9 2.35:1 Image 7-7 Common non- anamorphic a spect ratios in DVD sources 16:9 2.35:1 Image 7-8 Anamorphic aspect r atios in DVD sources What can be done ? The aspect ratio setting.
7. Image Menu 4:3 16:9 2.35:1 16:9 anamorphic 2.35:1 anamorphic Projector setting Source 4:3 16:9 5:4 Image 7-9 Possibl e aspect ratio setting s and their effect on dif ferent sources in the iQ.
7. Image M enu Image 7- 10 The aspect ratio settings are grey ed out in case the Show native resolution or the Full screen representation settin g is enable d. How to set a custom As pect ratio ? 1. Press MENU to a ctivate the T oo l bar 2. Press → to se lect Image 3.
7. Image Menu Image 7-12 7.3 Show native resolution Graphics Native resolution of the LCD panels = 1024 pixe ls x 768 pixels (4:3) Reality(SXGA) Native resolution of the LCD panels = 1366 pixels x 102.
7. Image M enu 4. Use ↑ or ↓ to s elect Show native resolution (image 7-13) 5. Press → to pu ll down the menu 6. Use ↓ or ↑ to se lect On 7. Press ENTER A white bullet shows the selection Image 7- 13 The default mode is us ed if the show native resolution and the full screen functio n are off.
7. Image Menu Image 7-14 Image 7-15 Image 7-16 T op adj ustment of the key stone Image 7-17 Bottom adjustment of the keystone 7.5 Color temperature What can be done ? The color temperature can be sele.
7. Image M enu 4. Use ↑ or ↓ to selec t Color temperature 5. Press → to pu ll down the menu 6. Use ↓ or ↑ to select the desired preset color temperature 7. Press ENTER The color temperature of the image is adapted and a white bullet shows the active setting.
7. Image Menu 0 42 83 125 167 40 80 120 160 FILM 24 f/s VIDEO PAL 50f/s NTSC VIDEO 60 f/s 0 1/20s 1/30s 50 83 133 167 2/2 3/2 Image 7- 21 film to video conversion : 2/2 and 2/3 pull down method The filmmode detection insures that these c onverted signals are sh own withou t artefacts, especially motion artefacts due to bad de-interlacing.
7. Image M enu Image 7- 23 7.7 Blanking Blanking in the I mage menu The blanking in general allows to blank unwanted video information (noise in the top or bottom of the image). The blanking in the image menu is the same as in the Display settings menu except for the fact that here the blanking settings are stored in the image files.
7. Image Menu Black level ∆ G ∆Β ∆ R R G B Image 7-25 One can conclu de here that a good c olor tracking can only be met by usin g three previously (input) balan ced color signals Analog Digital Conve rsion The analog color signals must pass t hrough an Analog/Digi tal co nversion ci rcuit p rior to a ny digit al process ing in t he PMP .
7. Image M enu A B Image 7- 27 White balance : In the projector , we will set the contrast for each color until we get a 100% light output picture when projecting a 100% white image (image A) Black ba.
7. Image Menu Image 7-29 Image 7-30 Image 7-31 Performing White input bal ance 1. Con nect the source you want to project 2. Select a white pattern (or gray scale as alternative) 3. Press MENU to activate the T oolbar 4. Press → t o select the Imag e item 5.
7. Image M enu Image 7-32 Image 7-33 if one uses a gray scale pattern, the brigh t spots should appear in the white bar . Selecting Preset restores t he factor y input bala nce setti ng Remark on the input balance of a component vi deo source Before starting the Inp ut Balance procedure, generate a signal wit h dominant white parts.
7. Image Menu • The white balance happens only on G reen Adjust until bright spots appear in the image Image 7-34 • The black balance happens on the three colors The PR and PB connector have to be.
7. Image M enu Image 7- 36 The AGC can be disturbing in cas e of Macrovision encoded signals, therefore the AGC can be disabled (OF F) at any time 7.10 Manual Gain Control What can be done ? Beside the AGC there is the possibility to manually set the gain of the incoming video signal.
7. Image Menu Image 7-38 74 R5976491 IQ PRO G500 01/02/2007.
8. Tools Men u 8. T OOLS MENU Overview • Introduction to PiP • PiP s elect • PiP add window • PiP remove window • PiP la yout •P i P A d j u s t • Diagnostics 8.1 Introduction to PiP PiP PiP stands for "Picture in Picture" and allows to display multiple windows containing each of them an image.
8. Tools Menu What are the different Pi P layouts ? • Full screen 2 The full screen is used to display one of the selected sources. Browsing through the sources is possible with the PiP Adjust button on the remote. • 2–by-2 raster 2 The screen is divided into 4 subscreens containing 2 V ideo and 2 Data sources.
8. Tools Men u 8.2 PiP select PiP layouts The different PiP layouts (configurations) can be selected in the PiP select menu. How to change the PiP confi guration ? 1. Press MENU to a ctivate the T oo l bar 2. Press → to s elect the T ools item 3. Press ↓ to Pu ll down the T ools menu 4.
8. Tools Menu Image 8-4 Image 8-5 Image 8-6 8.4 PiP remove window How to remove a window ? 1. Press MENU to a ctivate the T oo l bar 2. Press → to s elect the T ools item 3. Pr ess ↓ to Pull down the T ools menu 4. Use ↑ or ↓ to select PiP r emove window (image 8-7) 5.
8. Tools Men u Image 8-8 8.5 PiP layout Overview •P i P S a v e • PiP rename layout • PiP de lete layout 8.5.1 PiP Save What can be done ? The active layout can be saved or "saved as". When a new layout is saved it is added to t he PiP select menu.
8. Tools Menu 8.5.2 PiP rename layo ut What can be done ? The non fixed layou ts (factory and personal layouts) can be renamed . The maximal length of the name is 12 characters. A fixed layout can not be renamed How to rename a layout ? 1. Press MENU to a ctivate the T oo l bar 2.
8. Tools Men u 4. Use ↑ or ↓ to select PiP layout 5. Press → to pu ll down the menu 6. Use ↑ or ↓ to select Delete 7. Press ENTER A dialog box is displayed (image 8-14) 8. Use ↑ or ↓ to select th e layout to be renamed 9. Press ENTER The layout is deleted and disappears from the dialog box Image 8- 14 8.
8. Tools Menu 2. Press → to s elect the T ools item 3. Press ↓ to Pu ll down the T ools menu 4. Use ↑ or ↓ to selec t PiP Adjust (image 8-16) 5. Press ENTER The menu dissapears. The focus moves to the next window w hen pressing ENTER (clockwise rotation) If you press BACK or if you w ait 5 seconds the menu is displayed.
8. Tools Men u Image 8-17 I 2 C diagnostics fpga backplane1 fpga backplane2 fpga backplane3 ADC layer1 ADC layer2 ADC layer3 Serial eeprom DVI layer2 Serial eeprom DVI layer3 Video decoder Video indic.
8. Tools Menu 84 R5976491 IQ PRO G500 01/02/2007.
9. Signal Menu 9. SIGNAL MENU Overview • Switching mode • Background 9.1 Switching mode Switching from one sour ce to another T o minimize undesired ef fects when switching from one sour ce to ano.
9. Signal Menu When the source sw itching mode is the fade in/out mode, the audio ( when available) switching will also be done using a f ade in/ out effec t. 9.2 Background Purpose If there is no signal connected to the projector , the background will be a logo, a black or a blue screen depending on the background settings.
10. Lamp Menu 10. LAMP MENU Overview • Runtimes • Mode • Power mode (only active in the iQG/R 500) • History • Reset runtime • Runtime warning 10.1 Runtimes How to display the lamp runti mes ? 1. Press MENU to activate the T oolbar 2. Press → to s elect the Lamp item 3.
10. Lamp Menu The projector will always switch to the lamp with the shortest runtime when the dif ference between the runtimes of lamp1 and lamp 2 reaches 100 hours , switching from one lamp to another happe ns only at switching on of the projector and not during operation.
10. Lamp Menu Image 10-4 When switching from th e dual mode to the single mode the lamp with the longest runtime is switched off. If the runtimes are equal (if the projector has always been operated in dual mode) then lamp1 i s switched o ut.
10. Lamp Menu A dialog box is displayed. Confirm or cancel with Accept or Cancel (image 10-7) Image 10-6 Image 10-7 10.4 History How to view the hi story ? 1. Press MENU to a ctivate the T oo l bar 2. Press → to s elect the Lamp item 3. Press ↓ to Pu ll down the Lamp menu 4.
10. Lamp Menu Image 10-9 10.5 Reset runtime When to reset the lamp runtime ? The lamp runtime should only be reset whe n placing a new lamp. W ARNING : Lamp runtim e reset as well as the lamp replacem ent can only be done by a Barco authorized technician.
10. Lamp Menu Image 10-1 1 W ARNING : Lamp runtim e reset as well as the lamp replacem ent can only be done by a Barco authorized technician. How to reset the l amp runtime in the SIM5Pl us? 1. Press MENU to a ctivate the T oo l bar 2. Press → to s elect the Lamp item 3.
10. Lamp Menu How to se t the lamp runtim e warning? 1. Press MENU to activate the T oolbar 2. Press → to s elect the Lamp item 3. Press ↓ to Pu ll down the Lamp menu 4. Use ↑ or ↓ to se lect Runtime warning (image 10-13) 5. Press ENTER A dialogbox is displayed (image 10-14) 6.
10. Lamp Menu 94 R5976491 IQ PRO G500 01/02/2007.
11. Image files me nu 11 . I M A G E F I L E S M E N U Overview • Load file • Auto Image • Edit file • Rename file • Copy • Delete • Forced file load 1 1.1 Load file H o wt ol o a daf i l e? 1. Press MENU to a ctivate the T oo l bar 2. Press → to select the Image files item 3.
11. Image files menu Image 1 1-2 In PiP mode, the fil es which may be loaded will be of the data type if the a ctive window is a data window, or they will be of the video type if the active windo w is a video window .
11. Image files me nu A text box showing a progress bar is displayed. (image 1 1-4) Tip : Press the Canc el button to cancel the operation. Image 1 1-3 Image 1 1-4 The Auto Image s etup in the Display setup menu affect only Auto Image if it is launched via th e RCU key or at automatic file creation.
11. Image files menu A dialog box is displayed (image 1 1-7) 9. Use ← or → , the numeric keys on the remote, or the keypad to edit and change the v alues, confirm with ENTER Note: greyed out field.
11. Image files me nu Advanced vide o settings Image 1 1-8 The advanced button enables the advanced settings for a video source. video signal video signal frame blanking HI egalisation Image 1 1-9 HI AGC Hold interval The Comb filter is by default en abled.
11. Image files menu Image 1 1-10 vid eo in fo a Hs Hs b Image 1 1-1 1 Hs horizontal sync pulse aa c t i v e l o w b active high The VCO range setting determines the frequency range of the V CO (V oltage Controlled Oscillator). The Cpmp (Charge pump c urrent) sets the low pass filter current.
11. Image files me nu Image 1 1-12 Image 11-13 Image 1 1-14 1 1.5 Copy How to copy a file ? 1. Press MENU to a ctivate the T oo l bar 2. Press → to select the Image files item 3. Press ↓ to Pull down the Imag e files menu 4. Use ↑ or ↓ to se lect copy (image 1 1-15) 5.
11. Image files menu Image 1 1-15 Image 11-16 Image 1 1-17 If the AutoImage func tion does not succeed in finding a file and no file is load ed (load list is empty), which m eans that the source is not display ed, then use the copy function: Copy a stan dard file (.
11. Image files me nu Image 1 1-18 Image 11-19 1 1.7 Forced file load What can be done ? For ced file load allows to force or lock one particular custom file to be loaded for one particular input. This way one can guarantee that the same desired file is always used for a particular source.
11. Image files menu Image 1 1-20 104 R5976491 IQ PRO G500 01/02/2007.
12. Display setup 12. DISPLA Y SETUP Overview • Full screen representation • Startup screen • T extbox • T ake screenshot • Menu bar position • Status bar position • Sliderbox position • AutoImage Setup •B l a n k i n g 12.
12. Display setup Image 12-1 How to enable/di sable the Sta rtup screen? 1. Press MENU to a ctivate the T oo l bar 2. Press → to se lect the Display setup item 3. Press ↓ to Pull down the Display setup menu 4. Use ↑ or ↓ to select Startup screen 5.
12. Display setup Image 12-2 Default (factory stored) Logo How to t ake a screenshot ? 1. Press MENU to a ctivate the T oo l bar 2. Press → to se lect the Display setup item 3. Press ↓ to Pull down the Display setup menu 4. Use ↑ or ↓ to select T ake screenshot (image 12-3) 5.
12. Display setup 12.5 M enu bar position What can be done ? The menu toolbar can be centered vertically , the range being from top of the screen to the middle of the screen. This can be useful in applications where the top image content is not displayed.
12. Display setup Image 12-8 12.7 S liderbox position What can be done ? The sliderbox can be displayed anywhere on the screen, the position can be set in this menu. How to reposit ion the slider box? 1. Press MENU to a ctivate the T oo l bar 2. Press → to se lect the Display setup item 3.
12. Display setup 12.8 AutoImage Setup What can be done ? Autoimage allows to de tect automatically the characteristics of t he source (total pixe ls per line,.
12. Display setup During the AUTOIMAGE mea suring process the data source d isappears temporarily (logo is displayed if back- ground is set to logo ) 12.
12. Display setup Image 12- 14 Image 12-15 Use the checkboxes to en able/disable the blanking Use the Reset key to reset th e blanking values. The logo is al so affec ted by the bla nking 112 R5976491.
13. Installation me nu 13. INST ALLA TION MENU Overview • Lens adjustments • Projector address • Orientation • Language • Quick access keys • RS232 baudrate • Automatic startup • Security • Change password • Gemini installed (only for GEMINI CADWALL systems ! ) 13.
13. Installatio n menu Image 13-2 Image 13-3 13.2 P rojector address What can be done ? The projector is shipped with projector address set to ”0” In some cases the projector address must be changed, for example if an unique RCU is used to control 2 or more projectors (inde- pendently).
13. Installation me nu Image 13-5 Image 13-6 Entering the new projector address ? 1. Enter the new projector address with the digit keys on the RCU, the local keypad or the cursor keys. This address mus t be between 0 and 255. How to change the common RC5 address ? 1.
13. Installatio n menu Image 13-7 13.4 Language List of languages The list of selectable languages is depending on the software of the pro jector. How to change the Language ? 1. Press MENU to a ctivate the T oo l bar 2. Press → to select the Installation item 3.
13. Installation me nu 13.5 Q uick access keys What can be done ? The 3 function keys on t op of the RCU can be associated with a particular item in one of the menus. Each function which is not password protected or does not have a key on the RCU can be associa ted to a functi on key .
13. Installatio n menu 13.6 RS232 baudrate How to change the baudrat e? 1. Press MENU to a ctivate the T oo l bar 2. Press → to select the Installation item 3. Press ↓ to Pull down the Ins tallation menu 4. Use ↑ or ↓ to select RS232 baudrate (image 13-1 1) 5.
13. Installation me nu 13.8 Security What can be done ? A security function is implemented in the projector and allows a protection against theft. A PIN code allows the user to lock the projector in case of wrong code entry .
13. Installatio n menu Image 13-13 Image 13-14 Image 13-15 Image 13-16 How to disable the securi ty mode ? 1. Press MENU to a ctivate the T oo l bar 2. Press → to select the insta llation item 3. Press ↓ to Pull down the menu 4. Use ↑ or ↓ to select Security 5.
13. Installation me nu A dialog box is displayed 8. Enter your PIN code The security mode is now disabled 13.9 C hange password How to change the password ? 1. Press MENU to a ctivate the T oo l bar 2. Press → to select the Installation item 3. Press ↓ to Pull down the Ins tallation menu 4.
13. Installatio n menu 13.10 Gemini installed (only fo r GEMINI CADW ALL systems ! ) When to enable ? Gemini is option is necessary when the iQ is used in a Gemini 2 channel CADWALL system.
14. IQ Network 14. IQ NETWORK LAN Local Area Net work WA N Wide Area Network Overview • Network architectu re • Network functionality • iQ Pro Server specifications • Getting s tarted • Control • Management & diagnostics • Configuration • DropZone • The Web client 14.
14. IQ Network WAN LAN RM : Remote control & Management P : projection area M2 : Meeting room M1 : Meeting room 1 A : SERVER R : remote meeting attendee V : streaming video data M3 : Large confere.
14. IQ Network The network centric p rojector may be configured in th e same way as a standard PC to sup port : - SNMP service : provides diagnostics, basic co ntrol via SNMP messaging - Microsoft Exchan ge services: fo r scheduling of projector tasks.
14. IQ Network 14.4.1 Connections Front plate (Layer 3) l ayout PC CARD 10/100 Base-T USB MIC IN LINE IN OUT D AB C Image 14-2 iQ Pro front pl ate (network layer ) A audio connections : mic input, line input, output B 4 x USB connection C RJ45 connector for network connection D PCMCIA slot How to connect the Single Board Comput er ? 1.
14. IQ Network Point to point c onfiguration A B Image 14-4 In case of a tempo rary configuration (demo purposes) one c an use the point to point configu r at ion, the c on- nection being done via RJ45 connections using a crosse d UTP cable.
14. IQ Network Image 14-5 When resetting the PC t he menuitems in the iQ Pro Server menu a re greyed out during a short period. Projector Standby s tate setting This setting defines what should happen with the iQ Pro Server when the projector is switched to standby .
14. IQ Network 14.4.4 Configuring the c lient software The same universal client interface is used for different netw ork centric projectors (iQ, iD, iCon). T he layout of the interface (positio n of the controls,...) is adap ted after detection of the projec tor type.
14. IQ Network Image 14-8 Image 14-9 projector lis t: contains a projector and a project or group sub list Image 14- 10 Depending on the in stalled network (use of DHCP server or not), th e IP address may be needed to be entered or not. For a point to poi nt installation the projector ’ s IP address must be entered man ually .
14. IQ Network Image 14-1 1 How to add projectors to a group ? 1. Click on the projector to be added in the projector list 2. Drag the projector down to the projector group. The projector is added to the group. Adding a pr ojector to a group can a lso be done by using the “Copy + Paste” method on the right m ouse button menu.
14. IQ Network Image 14-14 14.4.5 Configuring the Server sof tware Internal netwo rk connection The internal connection ( firmware connection) betw een the project or controller and the single board computer uses fixed IP ad- dresses. The IP address of the SBC can be found i n control panel • SBC: IP address = 192.
14. IQ Network Image 14-16 Image 14-17 C AUTION : Leave these IP addresse s unchanged ! The server menu The server menu can be opened by right clicking from the server tray icon R5976491 IQ PRO G500 0.
14. IQ Network Image 14-18 Start Meetings contr ol The meeting control is start ed and positioned on the desktop, through out the meeting i t will allow to : • Accept requests interactively : a requ.
14. IQ Network Networking setti ngs Image 14-20 • Port settings: it is advised to leave these settings in their default value. • Mail to field : see mail configuration in the client software • SNMP enable: allows to enable the SNMP control of the projector .
14. IQ Network • Enable password protection : when using a password, one must enter it when starting up the client interface • Automatically open sole document ... : when using a USB stic k, the document is automatically opened (only when one docu- ment present).
14. IQ Network 14.5 Control Overview • Description • How to use the control manager? • General • The source selection screen • The PiP screen • Image settings • Advanced co ntrol 14.
14. IQ Network • standby on/off •l a m p m o d e • sourc e selec tion • switching effects • background setting • all PiP settings (layout, window) • Image settings • lens adjustments T.
14. IQ Network 14.5.4 The source sele ction screen What can be done ? • A source selection dialog box allow s to visualize all the sources or only the detected sources.
14. IQ Network Image 14-29 PiP screen How to perform operations on a PiP layout As an example, let us choose a personal (non preset) layout, add a window , reposition the windows, and save the layout under a different name.
14. IQ Network Image 14-30 Image 14- 31 Image 14-32 Image 14-3 3 Add windo w dialog box Image 14- 34 Importing/export ing a layout Every PiP layout can be exported and saved as backup on the network or on the hard disk of t he Client PC. It can then be imported at any time.
14. IQ Network How to import/export a layout ? 1. Click on the Export but ton. A dialog box is displayed. (image 14-35) 2. Brow se to the desired location and fill in the filename. Image 14-35 How to import a layout ? 1. Click on the import button. A dialog box is displayed.
14. IQ Network 3. Slide the cursors to set the corresponding value (image 14-38) Image 14-37 Image 14- 38 Use the checkbox to define a coarse or a fin e setting. Click on t he Filmmo de button to enable or disable the filmmode. Color temperat ure preset settin gs 1.
14. IQ Network Image 14-40 Geometry settings 1. Click on Image settings menu in the tool bar to drop d own the submenu. (image 14-41) 2. Click on Geometry . a dialog box is displayed. (image 14-42) 3. Use the bu ttons to zoom or pan. Tip : Use the buttons to choose small, medium or large adjustment steps.
14. IQ Network 14.5.7.1 Lens adjustments How to adjust t he lens ? 1. Click on the Advance d menu in the tool bar to drop down the submenu 2. Click on lens adjustmen ts (image 14-43) 3. Use the buttons to shift/zoom/focus the lens (image 14-44 ) Tip : Use the buttons to choose small, medium or large adjustment steps.
14. IQ Network Image 14-45 The adva nced Options sc reen How to set up and perf orm AutoImage ? 1. Che ck the boxes corresponding to the desired setting of AutoImage. (image 14-46) 2. Click on Apply to perform AutoImage. Image 14-46 Lamp runtime warnings startu p settings 1.
14. IQ Network 14.6 Management & diagnostics 14.6.1 Descr iption What can be done ? Diagnosis of a projector or a gro up of projectors is possible thr ough on line monitoring.
14. IQ Network Image 14-49 advanced diagnostics scr een: green = OK ; red = error 14.7 Configuration 14.7.1 E-mail messaging What can be done ? E-mail messaging allows the projector to generate automatic ally E-mail and send them to three configurable recipients.
14. IQ Network Image 14- 50 mail configurat ion screen Image 14- 51 Mail “from” confi guration The “from” field of the received mails i.e. the nam e of the sender (in this case the iQ Pro server) can be configured in the server software.
14. IQ Network 4. Press the Up grade button on the browser to select the file to start the operation (image 14-54) 5. Press the Upgrade button on the upgrade screen to start the opera tion The information screen w ill show the progress of the operation.
14. IQ Network 14.8 DropZone 14.8.1 Dropzone tools What can be done ? The dropzone interface allows the user to manage (launch, store,...) presentation files from a local desktop. Image 14-55 the DropZone interfa ce 14.8.2 Start up Start up T o start using the DropZone one must define the server (projector /display) to connect to.
14. IQ Network Image 14-57 installation menu How to add a projector to the list ? 1. Click on the three suspension points to open the projector selection dialog box. (image 14-58) 2. Click on the Add button. A dialogbox is displayed. (image 14-59) 3. Enter the projector name or browse the netw ork.
14. IQ Network The projector name is filled in. 3. Click on Conn ect . Following message is displayed : “Connected to <pro jectorname> ...” Image 14-61 This is only p ossible if the location.
14. IQ Network Image 14-62 How to drop a fil e using the drag met hod ? 1. Drag the file into the drop window . (image 14-63) The window opens an d shows now the projector . (image 14-6 4) 2. re lease the mouse button . The projector will then process the file a ccording to the setting of the drop mode.
14. IQ Network 14.8.4 O pen remotely a file o n the projector H o wt oo p e naf i l eo nt h ep r o j e c t o r? 1. Click on the lower button of the DropZone interface A browser is displayed. Select the file to be projected. for iQ only: The file will only be projected if the “iQ PC” is selected in the source sele ction.
14. IQ Network IQ Pro Server desktop Control 1 1 1 2 3 2 3 3 2 Image 14-66 Virtu al Meeting 1 forward control 2 release control 3 request control How to perform remote de sktop sharing ? 1. Click on t he middle button The middle button indi cates the activation of the remote The desktop is displayed on the local PC monitor .
14. IQ Network Image 14-67 remote des ktop sharing in case of a Pow erPoint TM presenta tion How to take (mouse and keyboard)Cont rol over the desktop ? 1. Click on the Control menu The Control menu is displayed (image 14-68) 2. S elect the Request Control item The desktop can now be remote contro lled.
14. IQ Network Image 14-69 How to forward control over the desktop ? 1. Click on the Control menu The Control menu is displayed (image 14-70) 2. S elect the Forward Control item A pop up menu shows the meeting participants i.e. the users w hich are connected to the server and which participate to the Remote sharing of the desk top.
14. IQ Network Image 14-71 Image 14-72 Choosi ng Tru e col or as color depth setting will slow down the co mmunication. It is advised to leave the other Server properties as they are.
14. IQ Network Image 14-73 Web inte rface What can be done ? The possibilities are mainly the same as on the client software. The web interface allows a user friendly way to manage t he projector/display , its use being straightforward and similar to the client interface (ref).
15. General gui delines on Networ k Configur ation 15. GENERAL GUIDELINES ON NETWORK CONFIGURA TION Overview • General Network • The Internet and Web services The insta llati on of the iQ Pr o in .
15. General guidel ines on Network Confi guration Image 15-1 system tray Image 15 -2 server settings dialog box For more info, see "SNMP services", page 171 Microsoft Exchange and Outlook T o enable control via t he Microsoft Exchange integration, you need to install, enable and configure the IQProEXCH module.
A. Exchange A. EXCHANGE Introduction Some parameters values are installation dependent, and are show n here as an example. Y ou may need assistance from yo u network administrator , IT Manager or MIS .
A. Exchange For security reasons, y ou will probably not want to make the projecto r account part of one of the administrator groups. 2. Enable the acco unt to be used by the “iQ Pro Exchange Integration” service 3.
A. Exchange Assignment. In the list, add the user to the entry “ Log on as a s ervice ” 3. Th e log fil e contains “ Could not log on w ith Profile ’MS Exchange Sett ings ’” Make sure the profile exists.
A. Exchange Overview of the commands •O N •S T A N D B Y • P AUSE • P AUSE ON • P AUSE OFF •L O G O •L O G O O N •L O G O O F F • SWITCH SOURCE •S W I T C H L A Y O U T • LAUNCH .
A. Exchange Image A-3 A.2.2 Examp le Schedule projector ta sks in Microsoft Outlook 20 00 following tasks are scheduled: Image A-4 1. store attachment at 12:30 (Th e attached file is iQ_Pro_brochure.pdf) 2. turn the projector on at 13:00 and launch a different attached file 3.
A. Exchange Image A-5 The form contains the functionality that a normal user should be able to use without consulting the documentation. The attachments, date and time fields must be edited in the “Appointment” tab. Choosing items from the drop-dow n boxes fills i n the subject.
A. Exchange Image A-7 A.2.4 Folder form Folder form Alternatively , the fo rm can be installed for the Calendar folder only , by following th e procedure described below How to configure a fo lder form 1.
A. Exchange Image A-10 A.2.5 Li mitations and known “problems ” Overlapping t asks When launchin g 2 attachments with overlapping times it is possible for the application to exit at the end of the first period. For example, let’s say we try to display PRES1.
B. SNMP services B. SNMP SER VICES Introduction Some parameters values are installation dependent, and are show n here as an example. Y ou may need assistance from yo u network administrator , IT Mana.
B. SNMP services Command Ty p e LAMPPRODUCTNUMBER READ LAMPSERIALNUMBER READ SERVER TYPE READ SERVER VERSION READ EMBEDDEDSOFTW AREVERSION READ PROJECTORLANGUAGE READ PROJECTORNAME READ LOCA TION READ.
C. Troublesho oting C. TROUBLESHOOTING An Administrator password has been install ed for security reasons (worm and v irus protection): Password : Barco (case sensitive !) FA Q t a b l e This table gives a summary of possible errors, the aim of this section is to give general guidelines and tips for troubleshooting.
C. Troubleshoot ing 174 R5976491 IQ PRO G500 01/02/2007.
D. Cleaning the dustfilt ers D. CLEANING THE DUSTFIL TERS Overview • Dustfilters • Cleaning D.1 Dustfilters Location of the fil ters There are 4 filters located at different positions 1. Filter1: Lamp 1 2. Filter2 : Lamp 2 3. Filter 3 : X-Cube filter 4.
D. Cleaning the dustfilt ers Image D-3 Lamp filter removal Image D-4 lamp & X-Cube filters removed Image D-5 Input filter remo val Image D-6 Input filter rem oved If the airflow is falling under a p redetermined treshold value a warning will be display ed on the screen.
E. Standard Ima ge Files E. ST ANDARD IMAGE FILES E.1 T able overview T able ove rview The following standard image files are pre-programmed in the projector . Name 5 Resolution 6 Fvert Hz 7 FHor kHz 8 Fpix MHz 9 Ptot 10 Pact 11 Ltot 12 Lact 13 1600_48V 1600x600i 48,040 62,500 135,000 2160 1600 651 600 CGA 640x200i 59,924 15.
E. Standard Ima ge Files Name 5 Resolution 6 Fvert Hz 7 FHor kHz 8 Fpix MHz 9 Ptot 10 Pact 11 Ltot 12 Lact 13 hd_30p 1920x1080 30,000 33,750 74,000 2200 1920 1 125 1080 hd_60p 1280x720 60,000 45,000 7.
E. Standard Ima ge Files Name 5 Resolution 6 Fvert Hz 7 FHor kHz 8 Fpix MHz 9 Ptot 10 Pact 11 Ltot 12 Lact 13 S1600_67 1600x1280 67 89,286 200,000 2240 1600 1334 1280 SDI_625 675x278i 25,000 15,625 13.
E. Standard Ima ge Files Name 5 Resolution 6 Fvert Hz 7 FHor kHz 8 Fpix MHz 9 Ptot 10 Pact 11 Ltot 12 Lact 13 SXGA+_60 1280x1024 60 63,980 107,997 1688 1280 1066 1024 SXGA2_60 1280x960 60 59,999 107,9.
E. Standard Ima ge Files Name 5 Resolution 6 Fvert Hz 7 FHor kHz 8 Fpix MHz 9 Ptot 10 Pact 11 Ltot 12 Lact 13 XGA_EOS 1024x768 63,000 50,000 67,200 1344 1024 796 768 XGA75_GS 1024x768 74,534 59,701 79,284 1328 1024 801 768 SXGA_60 1280x1024 60 63,980 107.
E. Standard Ima ge Files 182 R5976491 IQ PRO G500 01/02/2007.
Gloss ary GLOSSAR Y AGC Automatic Gain Control: allows an automatic amplitude (gain) control of the incoming video signal ANSI 73. 1 1 American power plug to connect the power cord to the wall outlet. CEE7 European power plug to connect the power cord to the wall outlet.
Gloss ary Vide o Sele ctor The Video Selector is a graphical interface which all ows an over view of the different video inputs (Composite Video and S-Video) and whether they are active (signal connected) or not as well as the selection of these different signals.
Index INDEX A Address 37–38, 1 14 Program 38 RCU 38 Projector address 1 14 setting 37 Adjustments 1 13 lens 1 13 AGC 72 Auto Image 96 AutoImage 1 10 Setup 1 10 B Background 86 Battery 17 Installatio.
Index Gemini 122 guidelines 9 Installation guidelines 9–10, 14 configurations 10 guidelines 9 lenses 14 Safety 9 safety warnings 9 L lamp 34 error 34 Lamp 33 runtime 33 Lamp history 90 Lamp mode 87 .
Index outlook intagration 167 P Packaging 5–6 Lens 6 projector 5 parameter 165 list 165 Password 121 change password 121 PiP 77–81 add window 77 adjust 81 layout 79 Layout 79–80 delete 8 0 renam.
Index 188 R5976491 IQ PRO G500 01/02/2007.
Revision Sheet To : Barc o nv Present ations Noordlaan 5, 8520 Kuurne Phone: +32 56.36.8 2.1 1, Fax: +32 56.3 5.86.51 E-mail: presentations.bid@barco.com, Web: www.
デバイスBarco G500の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Barco G500をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはBarco G500の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Barco G500の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Barco G500で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Barco G500を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はBarco G500の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Barco G500に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちBarco G500デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。